arXiv subjects

Behzad Salami

Publications and source records attributed to Behzad Salami.

At least 19 recordsLinked to original sources

arXiv2026

A Generic Modulo-$(2^n\pm\delta)$ RNS Multiplier Based on Twit Representation

Modular multiplication is a fundamental arithmetic primitive in Residue Number Systems (RNS) and is often the dominant source of delay, area, and energy consumption in RNS datapaths used in cryptography, signal processing, and machine-learning accelerators. Recent work introduced a twit-based residue representation for moduli of the form $2^n \pm \delta$, with $0 \le \delta \le 2^{n-1}-1$, and showed that it enables efficient generic modular addition and subtraction across the full admissible $\delta$ range. However, an efficient modular multiplier compatible with the same representation has remained unavailable. This paper presents a generic twit-based modulo-$(2^n \pm \delta)$ multiplier for RNS channels. The proposed architecture computes the product through operand splitting, modular partial-product generation, carry-save accumulation, overflow folding, and a twit-compatible final modular addition. By deferring carry propagation to the final stage, the resulting organization avoids the long critical paths characteristic of conventional multiply-then-reduce designs. To demonstrate the effectiveness of the proposed approach, we study a modulus set with 5-bit residue channels and show that, owing to the broad admissible range of $\delta$, it can provide a sufficiently wide dynamic range. Moreover, additional 8-bit and 11-bit configurations are used to evaluate the proposed approach at larger channel widths. We implement and synthesize the proposed multiplier in a FreePDK 45\,nm flow, and the results show average reductions of 20.5\% in delay, 13.2\% in area, and 28.0\% in power relative to baseline designs. A system-level study further indicates that these circuit-level improvements translate into lower end-to-end latency over a broad range of modular multiplication and addition workloads.

cs.AR↗

arXiv2026

REPTILES: Repeated Tiles of Sargantana, a RISC-V multicore based on OpenPiton

Chip industry continues advancing and expanding modern computing systems, resulting in more complex multi-core processors. Conversely, academic projects face scalability challenges due to limited resources, highlighting the need for open-source frameworks that enable innovation and knowledge sharing. Recently, several open-source proposals have emerged, offering flexible and scalable designs, but fail to meet the performance demands of modern High-Performance Computing (HPC) applications. In this project, we present REPTILES, an open-source RISC-V multicore framework based on OpenPiton\thanks. REPTILES interconnects multiple Sargantana cores with the memory hierarchy of OpenPiton. Moreover, we present the new features incorporated in Sargantana and OpenPiton designs to improve the performance of HPC applications. We demonstrate that REPTILES presents suitable scalability, achieving a speedup of 3.1x on average with 4 cores. Additionally, we show that Sargantana's new features increase the performance of vector addition benchmark in a 9.3x.

cs.AR↗

arXiv2026

EMiX: Emulating Beyond Single-FPGA Limits

FPGA-level emulation is a key step in pre-silicon chip design validation. However, emulating large-scale multi-core systems increasingly exceed the hardware resource capacity of a single FPGA, limiting the feasibility of full-system emulation. To address this challenge, we introduce EMiX, a scalable multi-FPGA framework that enables distributed emulation of multi-core RISC-V architectures beyond single-FPGA resource limits. EMiX systematically partitions a monolithic multi-core design into multiple components and deploys them across multiple interconnected FPGAs, effectively exploiting inter-FPGA interconnects to balance scalability and performance without requiring fundamental RTL redesign. We prototype EMiX with a 64-core architecture across eight interconnected Alveo U55c FPGAs (scalable on core and FPGA counts), successfully demonstrating full-system execution including Linux boot. EMiX will be released as an open-source platform.

cs.AR↗

arXiv2026

Verification and Validation (V&V)-in-the-Loop for RISC-V Design: The Holistic Vision of BZL

The Barcelona Zetascale Lab (BZL) project aims to strengthening Europe's capacity in the design and manufacture of RISC-V based high-performance computing chips. In this context, we present a holistic pre-silicon verification and validation (V&V) methodology targeting highly robust RISC-V chip designs. This paper provides an overview of BZL's V&V approach, which integrates three complementary platforms: (1) a UVM-based verification environment to thoroughly validate RTL functionality; (2) an FPGA-based validation platform that enables system-level pre-silicon hardware-software RTL validation; and (3) a CI/CD flow that continuously automates build, deployment, and tests across these domains. By embedding these platforms into an industrial-grade V&V loop and exploiting large-scale CPU and FPGA hardware infrastructures, the BZL project enables continuous evolution of reliable hardware development and software integration. We believe that the BZL's V&V flow represents a robust and scalable foundation for ensuring the pre-silicon functional correctness and system level validation of RISC-V chip designs, and can serve as a key enabler for strategic initiatives in Europe, such as EPI and DARE, and beyond.

cs.AR↗

arXiv2024

Read Disturbance in High Bandwidth Memory: A Detailed Experimental Study on HBM2 DRAM Chips

We experimentally demonstrate the effects of read disturbance (RowHammer and RowPress) and uncover the inner workings of undocumented read disturbance defense mechanisms in High Bandwidth Memory (HBM). Detailed characterization of six real HBM2 DRAM chips in two different FPGA boards shows that (1) the read disturbance vulnerability significantly varies between different HBM2 chips and between different components (e.g., 3D-stacked channels) inside a chip, (2) DRAM rows at the end and in the middle of a bank are more resilient to read disturbance, (3) fewer additional activations are sufficient to induce more read disturbance bitflips in a DRAM row if the row exhibits the first bitflip at a relatively high activation count, (4) a modern HBM2 chip implements undocumented read disturbance defenses that track potential aggressor rows based on how many times they are activated. We describe how our findings could be leveraged to develop more powerful read disturbance attacks and more efficient defense mechanisms. We open source all our code and data to facilitate future research at https://github.com/CMU-SAFARI/HBM-Read-Disturbance.

cs.CR↗

arXiv2024

Makinote: An FPGA-Based HW/SW Platform for Pre-Silicon Emulation of RISC-V Designs

Emulating chip functionality before silicon production is crucial, especially with the increasing prevalence of RISC-V-based designs. FPGAs are promising candidates for such purposes due to their high-speed and reconfigurable architecture. In this paper, we introduce our Makinote, an FPGA-based Cluster platform, hosted at Barcelona Supercomputing Center (BSC-CNS), which is composed of a large number of FPGAs (in total 96 AMD/Xilinx Alveo U55c) to emulate massive size RTL designs (up to 750M ASIC cells). In addition, we introduce our FPGA shell as a powerful tool to facilitate the utilization of such a large FPGA cluster with minimal effort needed by the designers. The proposed FPGA shell provides an easy-to-use interface for the RTL developers to rapidly port such design into several FPGAs by automatically connecting to the necessary ports, e.g., PCIe Gen4, DRAM (DDR4 and HBM), ETH10g/100g. Moreover, specific drivers for exploiting RISC-V based architectures are provided within the set of tools associated with the FPGA shell. We release the tool online for further extensions. We validate the efficiency of our hardware platform (i.e., FPGA cluster) and the software tool (i.e., FPGA Shell) by emulating a RISC-V processor and experimenting HPC Challenge application running on 32 FPGAs. Our results demonstrate that the performance improves by 8 times over the single-FPGA case.

cs.AR↗

arXiv2023

PiDRAM: A Holistic End-to-end FPGA-based Framework for Processing-in-DRAM

Processing-using-memory (PuM) techniques leverage the analog operation of memory cells to perform computation. Several recent works have demonstrated PuM techniques in off-the-shelf DRAM devices. Since DRAM is the dominant memory technology as main memory in current computing systems, these PuM techniques represent an opportunity for alleviating the data movement bottleneck at very low cost. However, system integration of PuM techniques imposes non-trivial challenges that are yet to be solved. Design space exploration of potential solutions to the PuM integration challenges requires appropriate tools to develop necessary hardware and software components. Unfortunately, current specialized DRAM-testing platforms, or system simulators do not provide the flexibility and/or the holistic system view that is necessary to deal with PuM integration challenges. We design and develop PiDRAM, the first flexible end-to-end framework that enables system integration studies and evaluation of real PuM techniques. PiDRAM provides software and hardware components to rapidly integrate PuM techniques across the whole system software and hardware stack (e.g., necessary modifications in the operating system, memory controller). We implement PiDRAM on an FPGA-based platform along with an open-source RISC-V system. Using PiDRAM, we implement and evaluate two state-of-the-art PuM techniques: in-DRAM (i) copy and initialization, (ii) true random number generation. Our results show that the in-memory copy and initialization techniques can improve the performance of bulk copy operations by 12.6x and bulk initialization operations by 14.6x on a real system. Implementing the true random number generator requires only 190 lines of Verilog and 74 lines of C code using PiDRAM's software and hardware components.

cs.AR↗

arXiv2023

An Experimental Analysis of RowHammer in HBM2 DRAM Chips

RowHammer (RH) is a significant and worsening security, safety, and reliability issue of modern DRAM chips that can be exploited to break memory isolation. Therefore, it is important to understand real DRAM chips' RH characteristics. Unfortunately, no prior work extensively studies the RH vulnerability of modern 3D-stacked high-bandwidth memory (HBM) chips, which are commonly used in modern GPUs. In this work, we experimentally characterize the RH vulnerability of a real HBM2 DRAM chip. We show that 1) different 3D-stacked channels of HBM2 memory exhibit significantly different levels of RH vulnerability (up to 79% difference in bit error rate), 2) the DRAM rows at the end of a DRAM bank (rows with the highest addresses) exhibit significantly fewer RH bitflips than other rows, and 3) a modern HBM2 DRAM chip implements undisclosed RH defenses that are triggered by periodic refresh operations. We describe the implications of our observations on future RH attacks and defenses and discuss future work for understanding RH in 3D-stacked memories.

cs.CR↗

arXiv2022

TuRaN: True Random Number Generation Using Supply Voltage Underscaling in SRAMs

Prior works propose SRAM-based TRNGs that extract entropy from SRAM arrays. SRAM arrays are widely used in a majority of specialized or general-purpose chips that perform the computation to store data inside the chip. Thus, SRAM-based TRNGs present a low-cost alternative to dedicated hardware TRNGs. However, existing SRAM-based TRNGs suffer from 1) low TRNG throughput, 2) high energy consumption, 3) high TRNG latency, and 4) the inability to generate true random numbers continuously, which limits the application space of SRAM-based TRNGs. Our goal in this paper is to design an SRAM-based TRNG that overcomes these four key limitations and thus, extends the application space of SRAM-based TRNGs. To this end, we propose TuRaN, a new high-throughput, energy-efficient, and low-latency SRAM-based TRNG that can sustain continuous operation. TuRaN leverages the key observation that accessing SRAM cells results in random access failures when the supply voltage is reduced below the manufacturer-recommended supply voltage. TuRaN generates random numbers at high throughput by repeatedly accessing SRAM cells with reduced supply voltage and post-processing the resulting random faults using the SHA-256 hash function. To demonstrate the feasibility of TuRaN, we conduct SPICE simulations on different process nodes and analyze the potential of access failure for use as an entropy source. We verify and support our simulation results by conducting real-world experiments on two commercial off-the-shelf FPGA boards. We evaluate the quality of the random numbers generated by TuRaN using the widely-adopted NIST standard randomness tests and observe that TuRaN passes all tests. TuRaN generates true random numbers with (i) an average (maximum) throughput of 1.6Gbps (1.812Gbps), (ii) 0.11nJ/bit energy consumption, and (iii) 278.46us latency.

cs.AR↗

arXiv2022

NEON: Enabling Efficient Support for Nonlinear Operations in Resistive RAM-based Neural Network Accelerators

Resistive Random-Access Memory (RRAM) is well-suited to accelerate neural network (NN) workloads as RRAM-based Processing-in-Memory (PIM) architectures natively support highly-parallel multiply-accumulate (MAC) operations that form the backbone of most NN workloads. Unfortunately, NN workloads such as transformers require support for non-MAC operations (e.g., softmax) that RRAM cannot provide natively. Consequently, state-of-the-art works either integrate additional digital logic circuits to support the non-MAC operations or offload the non-MAC operations to CPU/GPU, resulting in significant performance and energy efficiency overheads due to data movement. In this work, we propose NEON, a novel compiler optimization to enable the end-to-end execution of the NN workload in RRAM. The key idea of NEON is to transform each non-MAC operation into a lightweight yet highly-accurate neural network. Utilizing neural networks to approximate the non-MAC operations provides two advantages: 1) We can exploit the key strength of RRAM, i.e., highly-parallel MAC operation, to flexibly and efficiently execute non-MAC operations in memory. 2) We can simplify RRAM's microarchitecture by eliminating the additional digital logic circuits while reducing the data movement overheads. Acceleration of the non-MAC operations in memory enables NEON to achieve a 2.28x speedup compared to an idealized digital logic-based RRAM. We analyze the trade-offs associated with the transformation and demonstrate feasible use cases for NEON across different substrates.

cs.AR↗

arXiv2022

MoRS: An Approximate Fault Modelling Framework for Reduced-Voltage SRAMs

On-chip memory (usually based on Static RAMs-SRAMs) are crucial components for various computing devices including heterogeneous devices, e.g., GPUs, FPGAs, ASICs to achieve high performance. Modern workloads such as Deep Neural Networks (DNNs) running on these heterogeneous fabrics are highly dependent on the on-chip memory architecture for efficient acceleration. Hence, improving the energy-efficiency of such memories directly leads to an efficient system. One of the common methods to save energy is undervolting i.e., supply voltage underscaling below the nominal level. Such systems can be safely undervolted without incurring faults down to a certain voltage limit. This safe range is also called voltage guardband. However, reducing voltage below the guardband level without decreasing frequency causes timing-based faults. In this paper, we propose MoRS, a framework that generates the first approximate undervolting fault model using real faults extracted from experimental undervolting studies on SRAMs to build the model. We inject the faults generated by MoRS into the on-chip memory of the DNN accelerator to evaluate the resilience of the system under the test. MoRS has the advantage of simplicity without any need for high-time overhead experiments while being accurate enough in comparison to a fully randomly-generated fault injection approach. We evaluate our experiment in popular DNN workloads by mapping weights to SRAMs and measure the accuracy difference between the output of the MoRS and the real data. Our results show that the maximum difference between real fault data and the output fault model of MoRS is 6.21%, whereas the maximum difference between real data and random fault injection model is 23.2%. In terms of average proximity to the real data, the output of MoRS outperforms the random fault injection approach by 3.21x.

cs.AR↗

arXiv2022

PiDRAM: An FPGA-based Framework for End-to-end Evaluation of Processing-in-DRAM Techniques

DRAM-based main memory is used in nearly all computing systems as a major component. One way of overcoming the main memory bottleneck is to move computation near memory, a paradigm known as processing-in-memory (PiM). Recent PiM techniques provide a promising way to improve the performance and energy efficiency of existing and future systems at no additional DRAM hardware cost. We develop the Processing-in-DRAM (PiDRAM) framework, the first flexible, end-to-end, and open source framework that enables system integration studies and evaluation of real PiM techniques using real DRAM chips. We demonstrate a prototype of PiDRAM on an FPGA-based platform (Xilinx ZC706) that implements an open-source RISC-V system (Rocket Chip). To demonstrate the flexibility and ease of use of PiDRAM, we implement two PiM techniques: (1) RowClone, an in-DRAM copy and initialization mechanism (using command sequences proposed by ComputeDRAM), and (2) D-RaNGe, an in-DRAM true random number generator based on DRAM activation-latency failures. Our end-to-end evaluation of RowClone shows up to 14.6X speedup for copy and 12.6X initialization operations over CPU copy (i.e., conventional memcpy) and initialization (i.e., conventional calloc) operations. Our implementation of D-RaNGe provides high throughput true random numbers, reaching 8.30 Mb/s throughput. Over the Verilog and C++ basis provided by PiDRAM, implementing the required hardware and software components, implementing RowClone end-to-end takes 198 (565) and implementing D-RaNGe end-to-end takes 190 (78) lines of Verilog (C++) code. PiDRAM is open sourced on Github: https://github.com/CMU-SAFARI/PiDRAM.

cs.AR↗

arXiv2021

On the Impact of Device-Level Techniques on Energy-Efficiency of Neural Network Accelerators

Energy-efficiency is a key concern for neural network applications. To alleviate this issue, hardware acceleration using FPGAs or GPUs can provide better energy-efficiency than general-purpose processors. However, further improvement of the energy-efficiency of such accelerators will be extremely beneficial specially to deploy neural network in power-constrained edge computing environments. In this paper, we experimentally explore the potential of device-level energy-efficiency techniques (e.g.,supply voltage underscaling, frequency scaling, and data quantization) for representative off-the-shelf FPGAs compared to GPUs. Frequency scaling in both platforms can improve the power and energy consumption but with performance overhead, e.g.,in GPUs it improves the power consumption and GOPs/J by up to 34% and 28%, respectively. However, leveraging reduced-precision instructions improves power (up to 13%), energy (up to 20%), and performance (up to 7%) simultaneously, with negligible reduction in accuracy of neural network accuracy.

cs.DC↗

arXiv2020

An Experimental Study of Reduced-Voltage Operation in Modern FPGAs for Neural Network Acceleration

We empirically evaluate an undervolting technique, i.e., underscaling the circuit supply voltage below the nominal level, to improve the power-efficiency of Convolutional Neural Network (CNN) accelerators mapped to Field Programmable Gate Arrays (FPGAs). Undervolting below a safe voltage level can lead to timing faults due to excessive circuit latency increase. We evaluate the reliability-power trade-off for such accelerators. Specifically, we experimentally study the reduced-voltage operation of multiple components of real FPGAs, characterize the corresponding reliability behavior of CNN accelerators, propose techniques to minimize the drawbacks of reduced-voltage operation, and combine undervolting with architectural CNN optimization techniques, i.e., quantization and pruning. We investigate the effect of environmental temperature on the reliability-power trade-off of such accelerators. We perform experiments on three identical samples of modern Xilinx ZCU102 FPGA platforms with five state-of-the-art image classification CNN benchmarks. This approach allows us to study the effects of our undervolting technique for both software and hardware variability. We achieve more than 3X power-efficiency (GOPs/W) gain via undervolting. 2.6X of this gain is the result of eliminating the voltage guardband region, i.e., the safe voltage region below the nominal level that is set by FPGA vendor to ensure correct functionality in worst-case environmental and circuit conditions. 43% of the power-efficiency gain is due to further undervolting below the guardband, which comes at the cost of accuracy loss in the CNN accelerator. We evaluate an effective frequency underscaling technique that prevents this accuracy loss, and find that it reduces the power-efficiency gain from 43% to 25%.

cs.LG↗

arXiv2020

Understanding Power Consumption and Reliability of High-Bandwidth Memory with Voltage Underscaling

Modern computing devices employ High-Bandwidth Memory (HBM) to meet their memory bandwidth requirements. An HBM-enabled device consists of multiple DRAM layers stacked on top of one another next to a compute chip (e.g. CPU, GPU, and FPGA) in the same package. Although such HBM structures provide high bandwidth at a small form factor, the stacked memory layers consume a substantial portion of the package's power budget. Therefore, power-saving techniques that preserve the performance of HBM are desirable. Undervolting is one such technique: it reduces the supply voltage to decrease power consumption without reducing the device's operating frequency to avoid performance loss. Undervolting takes advantage of voltage guardbands put in place by manufacturers to ensure correct operation under all environmental conditions. However, reducing voltage without changing frequency can lead to reliability issues manifested as unwanted bit flips. In this paper, we provide the first experimental study of real HBM chips under reduced-voltage conditions. We show that the guardband regions for our HBM chips constitute 19% of the nominal voltage. Pushing the supply voltage down within the guardband region reduces power consumption by a factor of 1.5X for all bandwidth utilization rates. Pushing the voltage down further by 11% leads to a total of2.3X power savings at the cost of unwanted bit flips. We explore and characterize the rate and types of these reduced-voltage-induced bit flips and present a fault map that enables the possibility of a three-factor trade-off among power, memory capacity, and fault rate.

cs.AR↗

arXiv2020

Exceeding Conservative Limits: A Consolidated Analysis on Modern Hardware Margins

Modern large-scale computing systems (data centers, supercomputers, cloud and edge setups and high-end cyber-physical systems) employ heterogeneous architectures that consist of multicore CPUs, general-purpose many-core GPUs, and programmable FPGAs. The effective utilization of these architectures poses several challenges, among which a primary one is power consumption. Voltage reduction is one of the most efficient methods to reduce power consumption of a chip. With the galloping adoption of hardware accelerators (i.e., GPUs and FPGAs) in large datacenters and other large-scale computing infrastructures, a comprehensive evaluation of the safe voltage reduction levels for each different chip can be employed for efficient reduction of the total power. We present a survey of recent studies in voltage margins reduction at the system level for modern CPUs, GPUs and FPGAs. The pessimistic voltage guardbands inserted by the silicon vendors can be exploited in all devices for significant power savings. On average, voltage reduction can reach 12% in multicore CPUs, 20% in manycore GPUs and 39% in FPGAs.

cs.AR↗

arXiv2020

Power and Accuracy of Multi-Layer Perceptrons (MLPs) under Reduced-voltage FPGA BRAMs Operation

In this paper, we exploit the aggressive supply voltage underscaling technique in Block RAMs (BRAMs) of Field Programmable Gate Arrays (FPGAs) to improve the energy efficiency of Multi-Layer Perceptrons (MLPs). Additionally, we evaluate and improve the resilience of this accelerator. Through experiments on several representative FPGA fabrics, we observe that until a minimum safe voltage level, i.e., Vmin the MLP accuracy is not affected. This safe region involves a large voltage guardband. Also, it involves a narrower voltage region where faults start to appear in memories due to the increased circuit delay, but these faults are masked by MLP, and thus, its accuracy is not affected. However, further undervolting causes significant accuracy loss as a result of the fast-increasing high fault rates. Based on the characterization of these undervolting faults, we propose fault mitigation techniques that can effectively improve the resilience behavior of such accelerator. Our evaluation is based on four FPGA platforms. On average, we achieve >90% energy saving with a negligible accuracy loss of up to 0.1%.

eess.SP↗

arXiv2019

On the Resilience of Deep Learning for Reduced-voltage FPGAs

Deep Neural Networks (DNNs) are inherently computation-intensive and also power-hungry. Hardware accelerators such as Field Programmable Gate Arrays (FPGAs) are a promising solution that can satisfy these requirements for both embedded and High-Performance Computing (HPC) systems. In FPGAs, as well as CPUs and GPUs, aggressive voltage scaling below the nominal level is an effective technique for power dissipation minimization. Unfortunately, bit-flip faults start to appear as the voltage is scaled down closer to the transistor threshold due to timing issues, thus creating a resilience issue. This paper experimentally evaluates the resilience of the training phase of DNNs in the presence of voltage underscaling related faults of FPGAs, especially in on-chip memories. Toward this goal, we have experimentally evaluated the resilience of LeNet-5 and also a specially designed network for CIFAR-10 dataset with different activation functions of Rectified Linear Unit (Relu) and Hyperbolic Tangent (Tanh). We have found that modern FPGAs are robust enough in extremely low-voltage levels and that low-voltage related faults can be automatically masked within the training iterations, so there is no need for costly software- or hardware-oriented fault mitigation techniques like ECC. Approximately 10% more training iterations are needed to fill the gap in the accuracy. This observation is the result of the relatively low rate of undervolting faults, i.e., <0.1\%, measured on real FPGA fabrics. We have also increased the fault rate significantly for the LeNet-5 network by randomly generated fault injection campaigns and observed that the training accuracy starts to degrade. When the fault rate increases, the network with Tanh activation function outperforms the one with Relu in terms of accuracy, e.g., when the fault rate is 30% the accuracy difference is 4.92%.

cs.LG↗