arXiv subjects

Beili Ying

Publications and source records attributed to Beili Ying.

At least 19 recordsLinked to original sources

arXiv2026

Three-dimensional evolution of a solar filament with multipoint observations

In this paper, we first devise a geometrical model, featuring a torus-like flux rope based on the shape of 3DCORE model. The global shape of the torus is an ellipse, while the cross sections are circular along the torus. The thinnest point is located between the Sun center and photosphere. Deflections and inclination are considered as well. Using multiwavelength observations from perspectives of Earth, Ahead-STEREO (STA), and Solar Orbiter, we apply the model to three-dimensional (3D) reconstructions and tracking of the filament eruption, which was associated with a flare and a coronal mass ejection (CME) on 2024 October 8. The morphology, direction, and true velocity ($\sim$433 km/s) of the eruptive filament are obtained. It is found that the filament propagates nonradially, deflecting slightly eastward by $\sim$10 degrees and significantly southward by $\sim$40 degrees. Trajectory of the filament in the ecliptic plane reveals that the filament moves toward STA. The true direction of the eruptive filament using imaging and spectral observations is mutually verified by 3D reconstructions. The heliocentric distance of the filament increases from $\sim$1.68 to $\sim$2.94 solar radii within 35 minutes. Based on the results of 3D reconstructions, the true speed of the CME leading edge is evaluated to be 1046$-$1145 km/s.

astro-ph.SR↗

arXiv2025

Early Evolution of the Cavity and Core of a Coronal Mass Ejection in the Inner Corona

Coronal mass ejections (CMEs) typically exhibit a three-component structure in white-light (WL) coronagraphs. Utilizing the seamless observations of the inner corona ($\le$ 3 R$_\odot$), we have revealed the early evolution of the cavity and core of a CME starting at $\sim$18:20 UT on 2014 October 14. The CME originates from a hot channel (HC), which appears as the bright core and compresses the cavity in WL images. Specifically, most of the dark cavity in WL is filled by bright loop-like structures in 174 \AA. The differential emission measure (DEM) analysis indicates that the electron temperature decreases from the core ($\sim$13.4 MK) to the cavity ($\sim$1.35 MK), and the CME cavity is significantly cooler than that enshrouding a prominence ($\ge$ 2 MK). The effective temperature of the cavity increases over time in general, probably due to the compression by the HC expansion. The evolution of the CME bright core includes slow-rise, fast-rise (up to $\sim$330 km s$^{-1}$), and residual-acceleration phases. The cavity exhibits an evolution similar to the core but lags by $\sim$4 minutes, with a lower speed peaking at $\sim$220 km s$^{-1}$. Moreover, the 2D radial speed distribution exhibits the highest speeds at the core apex. The kinematical results further confirm the compression of the cavity. The present event supports the new explanation of the CME structures, i.e., the magnetic flux rope (MFR), which is proxied by the HC, is only responsible for the core, while the cavity is likely a low-density region between the CME front and the MFR.

astro-ph.SR↗

arXiv2025

Understanding the Ly{\alpha} Emission Observed by the Solar Disk Imager Aboard the Advanced Space-based Solar Observatory

The H I Lyman-alpha (Ly$\alpha$) emission, with a wavelength of 1216 \r{A}, is the brightest solar ultraviolet (UV) line. However, comprehensive observations of the Ly$\alpha$ emission line across the full solar disk remain limited. As part of the ASO-S mission, the Solar Disk Imager (SDI) has successfully captured full-disk images in the Ly$\alpha$ band. Gaussian fitting of SDI's spectral response function (SRF) yields a full width at half maximum (FWHM) of approximately 85 \r{A}, which is significantly broader than the distance of Si III line at 1206 \r{A} and the Ly$\alpha$ line. Thus, the emission contribution of Si III to the SDI Ly$\alpha$ passband needs to be considered. For flares, in practice, we calculated the integrated intensity ratio $I$(Si III)/$I$(Ly$\alpha$) by analyzing spectral observations from the SOLSTICE instrument. It yields values between 1.7% and 14.6%. Empirically, the ratio is proportional to the SXR flux. Further analysis of spectral data from the SUMER instrument reveals that the ratio $I$(Si III)/$I$(Ly$\alpha$) is approximately 0.5% for prominences, 0.7%--0.9% for the inner disk, and 1.4%--1.9% close to the limb. These findings suggest that $I$(Si III)/$I$(Ly$\alpha$) is minimal for prominences and the inner disk, and the varying ratios across regions align with the center-to-limb variation of the Si III and Ly$\alpha$ lines. Additionally, we compared Ly$\alpha$ image intensity with 304 \r{A}, 1600 \r{A}, and 1700 \r{A} observations from AIA, as well as H$\alpha$ from CHASE, in multiple regions (a prominence region, two active regions, and a quiet region). A relatively higher correlation of about 85% is found between Ly$\alpha$ and 304 \r{A} in active regions, whereas in the quiet region and prominence, their correlation coefficients are about 55%.

astro-ph.SR↗

arXiv2025

Tracking an eruptive intermediate prominence originating from the farside of the Sun

In this paper, we carry out multiwavelength and multiview observations of the eruption of an intermediate prominence originating from the farside of the Sun on 2023 March 12. The southeast footpoint of the prominence is located in active region (AR) 13252. The eruption generates a B7.8 class flare and a partial halo coronal mass ejection (CME). The prominence takes off at 02:00 UT and accelerates for nearly three hours. Rotation of the southeast leg of the prominence in the counterclockwise direction is revealed by spectroscopic and imaging observations. The apex of the prominence changes from a smooth loop to a cusp structure during the rising motion and the northwest leg displays a drift motion after 04:30 UT, implying a writhing motion. Hence, the prominence eruption is most likely triggered by ideal kink instability. For the first time, we apply the Graduated Cylindrical Shell (GCS) modeling in three-dimensional reconstruction and tracking of the prominence for nearly two hours. Both the source region (110$\degr$E, 43$\degr$N) and northwest footpoint (162$\degr$E, 44$\degr$N) are located. The edge-on and face-on angular widths of the prominence are $\sim$6$\degr$ and $\sim$86$\degr$, respectively. The axis has a tilt angle of $\sim$70$\degr$ with the meridian. The heliocentric distance of the prominence leading edge increases from $\sim$1.26\,$R_{\sun}$ to $\sim$2.27\,$R_{\sun}$. The true speed of the CME increases from $\sim$610 to $\sim$849 km s$^{-1}$.

astro-ph.SR↗

arXiv2024

Inflight Performance and Calibrations of the Lyman-alpha Solar Telescope on board the Advanced Space-based Solar Observatory

The Lyman-alpha Solar Telescope (LST) on board the Advanced Space-based Solar Observatory (ASO-S) is the first payload to image the full solar disk and the solar corona in both white-light (WL) and ultraviolet (UV) H I Lya, extending up to 2.5 solar radii (Rs). Since the launch of the ASO-S on 9 October 2022, LST has captured various significant solar activities including flares, prominences, coronal mass ejections (CMEs). LST covers different passbands of 121.6 nm, 360 nm and 700 nm. The Lya Solar Disk Imager (SDI) has a field of view (FOV) of 38.4 arcmin and a spatial resolution of around 9.5 arcsec, while the White-Light Solar Telescope (WST) has a FOV of 38.43 arcmin and a spatial resolution of around 3.0 arcsec. The FOV of the Lya Solar Corona Imager (SCI) reaches 81.1 arcmin and its spatial resolution is 4.3 arcsec. The stray-light level in the 700 nm waveband is about 7.8e-6 MSB (mean solar brightness) at 1.1 Rs and 7.6e-7 MSB at 2.5 Rs, and in the Lya waveband it is around 4.3e-3 MSB at 1.1 Rs and 4.1e-4 MSB at 2.5 Rs. This article will detail the results from on-orbit tests and calibrations.

astro-ph.SR↗

arXiv2024

Asymmetric Hard X-ray Radiation of Two Ribbons in a Thermal-Dominated C-Class Flare

The asymmetry in hard X-ray (HXR) emission at the footpoints (FPs) of flare loops is a ubiquitous feature closely associated with nonthermal electron transport. We analyze the asymmetric HXR radiation at two flare ribbons which is thermal-dominated during a long-duration C4.4 flare that occurred on March 20, 2023, combining multi-view and multi-waveband observations from the ASO-S, SolO, and SDO spacecraft. We find that the H I Ly$\alpha$ emission captures similar features to the He II $\lambda$304 in both light curve and spatio-temporal evolution of a pair of conjugate flare ribbons. The spectra and imaging analysis of the HXR emission, detected by STIX in 4-18 keV, reveal that the two-ribbon flare radiation is thermal dominated by over 95%, and the radiation source mainly concentrates on the northern ribbon, leading to an asymmetric distribution. To understand the underlying reasons for the HXR radiation asymmetry, we extrapolate the magnetic field within the active region using the NLFFF model. For 78% of the magnetic field lines starting from the northern flare ribbon, their lengths from the loop-tops (LTs) to the northern FPs are shorter than those to the southern FPs. For 62% of the field lines, their magnetic field strengths at the southern FPs exceed those at the northern FPs. In addition, considering the larger density, $\approx1.0\times10^{10}$ cm$^{-3}$, of the low-lying flare loops (< 32 Mm), we find the shorter path from the LT to the northern FP enables more electrons to reach the northern FP more easily after collisions with the surrounding plasma. Therefore, in this thermal-dominated C-class flare, the asymmetric location of the flare LT relative to its two FPs plays a dominant role in the HXR radiation asymmetry, while such asymmetry is also slightly influenced by the magnetic mirror effect resulting in larger HXR radiation at the FPs with weaker magnetic strength.

astro-ph.SR↗

arXiv2024

Association between a Failed Prominence Eruption and the Drainage of Mass from Another Prominence

Sympathetic eruptions of solar prominences have been studied for decades, however, it is usually difficult to identify their causal links. Here we present two failed prominence eruptions on 26 October 2022 and explore their connections. Using stereoscopic observations, the south prominence (PRO-S) erupts with untwisting motions, flare ribbons occur underneath, and new connections are formed during the eruption. The north prominence (PRO-N) rises up along with PRO-S, and its upper part disappears due to catastrophic mass draining along an elongated structure after PRO-S failed eruption. We suggest that the eruption of PRO-S initiates due to a kink instability, further rises up, and fails to erupt due to reconnection with surrounding fields. The elongated structure connecting PRO-N overlies PRO-S, which causes the rising up of PRO-N along with PRO-S and mass drainage after PRO-S eruption. This study suggests that a prominence may end its life through mass drainage forced by an eruption underneath.

astro-ph.SR↗

arXiv2024

Parameter effects on the total intensity of H I Ly{\alpha} line for a modelled coronal mass ejection and its driven shock

The combination of the H I Ly{\alpha} (121.6 nm) line formation mechanism with ultraviolet (UV) Ly{\alpha} and white-light (WL) observations provides an effective method for determining the electron temperature of coronal mass ejections (CMEs). A key to ensuring the accuracy of this diagnostic technique is the precise calculation of theoretical Ly{\alpha} intensities. This study performs a modelled CME and its driven shock via the 3D MHD simulation. We generate synthetic UV and WL images of the CME and shock to quantify the impact of different assumptions on theoretical Ly{\alpha} intensities, such as the incident intensity of the Ly{\alpha} line (Idisk), the geometric scattering function (p({\theta})), and the kinetic temperature (Tn) assumed to be equal to the proton (Tp) or electron (Te) temperatures. By comparing differences of the Ly{\alpha} intensities under these assumptions, we find that: (1) Using the uniform or Carrington maps of the disk Ly{\alpha} emission underestimates the corona Ly{\alpha} intensity (< 10%) compared to the synchronic map, except for a slight overestimate (< 4%) in the partial CME core. The Carrington map yields lower uncertainties than the uniform disk. (2) The geometric scattering process has a minor impact on the Ly{\alpha} intensity, with a maximum relative uncertainty of < 5%. The Ly{\alpha} intensity is underestimated for the most part but overestimated in the CME core. (3) Compared to the assumption Tn = Tp, using Tn = Te leads to more complex relative uncertainties in CME Ly{\alpha} intensity. The CME core and void are both overestimated, with the maximum uncertainty in the core exceeding 50% and the void remaining below 35%. In the CME front, both over- and under-estimates exist with relative uncertainties of < 35%. The electron temperature assumption has a smaller impact on the shock, with an underestimated relative uncertainty of less than 20%.

astro-ph.SR↗

arXiv2024

Refinement of global coronal and interplanetary magnetic field extrapolations constrained by remote-sensing and in-situ observations at the solar minimum

Solar magnetic fields are closely related to various physical phenomena on the sun, which can be extrapolated with different models from photospheric magnetograms. However, the Open Flux Problem (OFP), the underestimation of the magnetic field derived from the extrapolated model, is still unsolved. To minimize the impact of the OFP, we propose three evaluation parameters to quantitatively evaluate magnetic field models and determine the optimal free parameters in the models by constraining the coronal magnetic fields (CMFs) and the interplanetary magnetic fields (IMFs) with real observations. Although the OFP still exists, we find that magnetic field lines traced from the coronal models effectively capture the intricate topological configurations observed in the corona, including streamers and plumes. The OFP is lessened by using the HMI synoptic map instead of the GONG daily synoptic maps, and the PFSS+PFCS model instead of the CSSS model. For Carrington Rotation (CR) 2231 at the solar minimum, we suggest that the optimal parameters for the PFSS+PFCS model are $R_{\mathrm{ss}} = 2.2-2.5\ R_{\mathrm{sun}}$ and $R_{\mathrm{scs}} = 10.5-14.0\ R_{\mathrm{sun}}$, as well as for the CSSS model are $R_{\mathrm{cs}} = 2.0 - 2.4\ R_{\mathrm{sun}}$, $R_{\mathrm{ss}} = 11.0 - 14.7\ R_{\mathrm{sun}}$ and $a = 1.0\ R_{\mathrm{sun}}$. Despite the IMFs at 1 AU being consistent with the measurements by artificially increasing the polar magnetic fields, the IMFs near the sun are still underestimated. The OFP might be advanced by improving the accuracy of both the weak magnetic fields and polar magnetic fields, especially considering magnetic activities arising from interplanetary physical processes.

astro-ph.SR↗

arXiv2024

Spectral and Imaging Observations of a C2.3 White-Light Flare from the Advanced Space-Based Solar Observatory (ASO-S) and the Chinese H$α$ Solar Explorer (CHASE)

Solar white-light flares are characterized by an enhancement in the optical continuum, which are usually large flares (say X- and M-class flares). Here we report a small C2.3 white-light flare (SOL2022-12-20T04:10) observed by the \emph{Advanced Space-based Solar Observatory} and the \emph{Chinese H$α$ Solar Explorer}. This flare exhibits an increase of $\approx$6.4\% in the photospheric Fe \textsc{i} line at 6569.2\,Å and {$\approx$3.2\%} in the nearby continuum. The continuum at 3600\,Å also shows an enhancement of $\approx$4.7\%. The white-light brightening kernels are mainly located at the flare ribbons and co-spatial with nonthermal hard X-ray sources, which implies that the enhanced white-light emissions are related to nonthermal electron-beam heating. At the brightening kernels, the Fe \textsc{i} line displays an absorption profile that has a good Gaussian shape, with a redshift up to $\approx$1.7 km s$^{-1}$, while the H$α$ line shows an emission profile though having a central reversal. The H$α$ line profile also shows a red or blue asymmetry caused by plasma flows with a velocity of several to tens of km s$^{-1}$. It is interesting to find that the H$α$ asymmetry is opposite at the conjugate footpoints. It is also found that the CHASE continuum increase seems to be related to the change of photospheric magnetic field. Our study provides comprehensive characteristics of a small white-light flare that help understand the energy release process of white-light flares.

astro-ph.SR↗

arXiv2024

A Statistical Study of Solar White-Light Flares Observed by the White-light Solar Telescope of the Lyman-alpha Solar Telescope on the Advanced Space-based Solar Observatory (ASO-S/LST/WST) at 360 nm

Solar white-light flares (WLFs) are those accompanied by brightenings in the optical continuum or integrated light. The White-light Solar Telescope (WST), as an instrument of the Lyman-alpha Solar Telescope (LST) on the Advanced Space-based Solar Observatory (ASO-S), provides continuous solar full-disk images at 360 nm, which can be used to study WLFs. We analyze 205 major flares above M1.0 from October 2022 to May 2023 and identify 49 WLFs at 360 nm from WST observations, i.e. with an occurrence rate of 23.9%. The percentages of WLFs for M1 - M4 (31 out of 180), M5 - M9 (11 out of 18), and above X1 (7 for all) flares are 17.2%, 61.1%, and 100%, respectively, namely the larger the flares, the more likely they are WLFs at 360 nm. We further analyze 39 WLFs among the identified WLFs and investigate their properties such as white-light enhancement, duration, and brightening area. It is found that the relative enhancement of the white-light emission at 360 nm is mostly (>90%) less than 30% and the mean enhancement is 19.4%. The WLFs' duration at 360 nm is mostly (>80%) less than 20 minutes and its mean is 10.3 minutes. The brightening area at 360 nm is mostly (>75%) less than 500 arcsecond2 and the median value is 225. We find that there exist good correlations between the white-light enhancement/duration/area and the peak soft X-ray (SXR) flux of the flare, with correlation coefficients of 0.68, 0.58, and 0.80, respectively. In addition, the white-light emission in most WLFs peaks around the same time as the temporal derivative of SXR flux as well as the hard X-ray emission at 20 - 50 keV, indicative of Neupert effect. It is also found that the limb WLFs are more likely to have a greater enhancement, which is consistent with numerical simulations.

astro-ph.SR↗

arXiv2022

Is there a Dynamic Difference between Stealthy and Standard CMEs?

Stealthy Coronal Mass Ejections (CMEs), lacking low coronal signatures, may result in significant geomagnetic storms. However, the mechanism of stealthy CMEs is still highly debated. In this work, we investigate whether there are differences between the stealthy and standard CMEs in terms of their dynamic behaviors. Seven stealthy and eight standard CMEs with slow speeds are selected. We calculate two-dimensional speed distributions of CMEs based on the cross-correlation method, rather than the unidimensional speed, and further obtain more accurate distributions and evolution of CME mechanical energies. Then we derive the CME driving powers and correlate them with CME parameters (total mass, average speed, and acceleration) for standard and stealthy CMEs. Besides, we study the forces that drive CMEs, namely, the Lorentz force, gravitational force, and drag force due to the ambient solar wind near the Sun. The results reveal that both the standard and stealthy CMEs are propelled by the combined action of those forces in the inner corona. The drag force and gravitational force are comparable with the Lorentz force. However, the impact of the drag and Lorentz forces on the global evolution of the stealthy CMEs is significantly weaker than that of the standard CMEs.

astro-ph.SR↗

arXiv2022

Three-dimensional analyses of an aspherical coronal mass ejection and its driven shock

Context. Observations reveal that shocks can be driven by fast coronal mass ejections (CMEs) and play essential roles in particle accelerations. A critical ratio, $δ$, derived from a shock standoff distance normalized by the radius of curvature (ROC) of a CME, allows us to estimate shock and ambient coronal parameters. However, true ROCs of CMEs are difficult to measure due to observed projection effects. Aims. We investigate the formation mechanism of a shock driven by an aspherical CME without evident lateral expansion. Through three-dimensional (3D) reconstructions without a priori assumptions of the object morphology, we estimate two principal ROCs of the CME surface and demonstrate how the difference between two principal ROCs of the CME affects the estimate of the coronal physical parameters. Methods. The CME was observed by the Sun Earth Connection Coronal and Heliospheric Investigation (SECCHI) instruments and the Large Angle and Spectrometric Coronagraph (LASCO). We used the mask-fitting method to obtain the irregular 3D shape of the CME and reconstructed the shock surface using the bow-shock model. Through smoothings with fifth-order polynomial functions and Monte Carlo simulations, we calculated the ROCs at the CME nose. Results. We find that (1) the maximal ROC is 2-4 times the minimal ROC of the CME. A significant difference between the CME ROCs implies that the assumption of one ROC of an aspherical CME could cause over-/under- estimations of the shock and coronal parameters. (2) The shock nose obeys the bow-shock formation mechanism, considering the constant standoff distance and the similar speed between the shock and CME around the nose. (3) With a more precise $δ$ calculated via 3D ROCs in space, we derive corona parameters at high latitudes of about -50$^{\circ}$, including the Alfv{é}n speed and the coronal magnetic field strength.

astro-ph.SR↗

arXiv2022

Observational Signatures of Tearing Instability in the Current Sheet of a Solar Flare

Magnetic reconnection is a fundamental physical process converting magnetic energy into not only plasma energy but also particle energy in various astrophysical phenomena. In this letter, we show a unique dataset of a solar flare where various plasmoids were formed by a continually stretched current sheet. EUV images captured reconnection inflows, outflows, and particularly the recurring plasma blobs (plasmoids). X-ray images reveal nonthermal emission sources at the lower end of the current sheet, presumably as large plasmoids with a sufficiently amount of energetic electrons trapped in. In the radio domain, an upward slowly drifting pulsation structure, followed by a rare pair of oppositely drifting structures, was observed. These structures are supposed to map the evolution of the primary and the secondary plasmoids formed in the current sheet. Our results on plasmoids at different locations and scales shed important light on the dynamics, plasma heating, particle acceleration, and transport processes in the turbulent current sheet and provide observational evidence for the cascading magnetic reconnection process.

astro-ph.SR↗

arXiv2020

Three-Dimensional Reconstructions of Coronal Wave Surfaces Using a New Mask-Fitting Method

Coronal waves are large-scale disturbances often driven by coronal mass ejections (CMEs). We investigate a spectacular wave event on 7 March 2012, which is associated with an X5.4 flare (SOL2012-03-07). By using a running center-median (RCM) filtering method for the detection of temporal variations in extreme ultraviolet (EUV) images, we enhance the EUV disturbance observed by the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO) and the Sun Watcher using Active Pixel System detector and Image Processing (SWAP) onboard the PRoject for Onboard Autonomy 2 (PROBA2). In coronagraph images, a halo front is observed to be the upper counterpart of the EUV disturbance. Based on the EUV and coronagraph images observed from three different perspectives, we have made three-dimensional (3D) reconstructions of the wave surfaces using a new mask-fitting method. The reconstructions are compared with those obtained from forward-fitting methods. We show that the mask fitting method can reflect the inhomogeneous coronal medium by capturing the concave shape of the shock wave front. Subsequently, we trace the developing concave structure and derive the deprojected wave kinematics. The speed of the 3D-wave nose increases from a low value below a few hundred $\mathrm{km\,s^{-1}}$ to a maximum value of about 3800 $\mathrm{km\,s^{-1}}$, and then slowly decreases afterwards. The concave structure starts to decelerate earlier and has significantly lower speeds than those of the wave nose. We also find that the 3D-wave in the extended corona has a much higher speed than the speed of EUV disturbances across the solar disk.

astro-ph.SR↗

arXiv2020

Extensive Study of a Coronal Mass Ejection with UV and WL coronagraphs: the need for multi-wavelength observations

Coronal Mass Ejections (CMEs) often show different features in different band-passes. By combining data in white-light (WL) and ultraviolet (UV) bands, we have applied different techniques to derive plasma temperatures, electron density, internal radial speed, etc, within a fast CME. They serve as extensive tests of the diagnostic capabilities, developed for the observations provided by future multi-channel coronagraphs (such as Solar Orbiter/Metis, ASO-S/LST, PROBA-3/ASPIICS). The involved data include WL images acquired by SOHO/LASCO coronagraphs, and intensities measured by SOHO/UVCS at 2.45 R$_{\odot}$ in the UV (H I Ly$α$ and O VI 1032 {AA} lines) and WL channels. Data from the UVCS WL channel have been employed for the first time to measure the CME position angle with polarization-ratio technique. Plasma electron and effective temperatures of the CME core and void are estimated by combining UV and WL data. Due to the CME expansion and the possible existence of prominence segments, the transit of the CME core results in decreases of the electron temperature down to $10^{5}$ K. The front is observed as a significant dimming in the Ly$α$ intensity, associated with a line broadening due to plasma heating and flows along the line-of-sight. The 2D distribution of plasma speeds within the CME body is reconstructed from LASCO images and employed to constrain the Doppler dimming of Ly$α$ line, and simulate future CME observations by Metis and LST.

astro-ph.SR↗

arXiv2019

A New Automatic Tool for CME Detection and Tracking with Machine Learning Techniques

With the accumulation of big data of CME observations by coronagraphs, automatic detection and tracking of CMEs has proven to be crucial. The excellent performance of convolutional neural network in image classification, object detection and other computer vision tasks motivates us to apply it to CME detection and tracking as well. We have developed a new tool for CME Automatic detection and tracking with MachinE Learning (CAMEL) techniques. The system is a three-module pipeline. It is first a supervised image classification problem. We solve it by training a neural network LeNet with training labels obtained from an existing CME catalog. Those images containing CME structures are flagged as CME images. Next, to identify the CME region in each CME-flagged image, we use deep descriptor transforming to localize the common object in an image set. A following step is to apply the graph cut technique to finely tune the detected CME region. To track the CME in an image sequence, the binary images with detected CME pixels are converted from cartesian to polar coordinate. A CME event is labeled if it can move in at least two frames and reach the edge of coronagraph field of view. For each event, a few fundamental parameters are derived. The results of four representative CMEs with various characteristics are presented and compared with those from four existing automatic and manual catalogs. We find that CAMEL can detect more complete and weaker structures, and has better performance to catch a CME as early as possible.

astro-ph.SR↗

arXiv2019

First Determination of 2D Speed Distribution within the Bodies of Coronal Mass Ejections with Cross-Correlation Analysis

The determination of the speed of Coronal Mass Ejections (CMEs) is usually done by tracking brighter features (such as the CME front and core) in visible light coronagraphic images and by deriving unidimensional profiles of the CME speed as a function of altitude or time. Nevertheless, CMEs are usually characterized by the presence of significant density inhomogeneities propagating outward with different radial and latitudinal projected speeds, resulting in a complex evolution eventually forming the Interplanetary CME. In this work, we demonstrate for the first time how coronagraphic image sequences can be analyzed with cross-correlation technique to derive 2D maps of the almost instantaneous plasma speed distribution within the body of CMEs. The technique is first tested with the analysis of synthetic data, and then applied to real observations. Results from this work allow to characterize the distribution and time evolution of kinetic energy inside CMEs, as well as the mechanical energy (combined with the kinetic and potential energy) partition between the core and front of the CME. In the future, CMEs will be observed by two channels (VL and UV Ly-$α$) coronagraphs, such as Metis on-board ESA Solar Orbiter mission as well as Ly-$α$ Solar Telescope (LST) on-board Chinese Advanced Space-based Solar Observatory (ASO-S) mission. Our results will help the analysis of these future observations, helping in particular to take into account the 2D distribution of Ly-$α$ Doppler dimming effect.

astro-ph.SR↗