Searcharxiv⌕ Search

arXiv subjects

Beixiong Zheng

Publications and source records attributed to Beixiong Zheng.

At least 37 records · Page 2Linked to original sources

Energy-Efficient UAV-Enabled MEC Systems: NOMA, FDMA, or TDMA Offloading?

Unmanned aerial vehicle (UAV)-enabled mobile edge computing (MEC) systems can use different multiple access schemes to coordinate multi-user task offloading. However, it is still unknown which scheme is the most energy-efficient, especially when the offloading blocklength is finite. To answer this question, this paper minimizes and compares the MEC-related energy consumption of non-orthogonal multiple access (NOMA), frequency division multiple access (FDMA), and time division multiple access (TDMA)-based offloading schemes within UAV-enabled MEC systems, considering both infinite and finite blocklength scenarios. Through theoretically analysis of the minimum energy consumption required by these three schemes, two novel findings are presented. First, TDMA consistently achieves lower energy consumption than FDMA in both infinite and finite blocklength cases, due to the degrees of freedom afforded by sequential task offloading. Second, NOMA does not necessarily achieve lower energy consumption than FDMA when the offloading blocklength is finite, especially when the channel conditions and the offloaded task data sizes of two user equipments (UEs) are relatively symmetric. Furthermore, an alternating optimization algorithm that jointly optimizes the portions of task offloaded, the offloading times of all UEs, and the UAV location is proposed to solve the formulated energy consumption minimization problems. Simulation results verify the correctness of our analytical findings and demonstrate that the proposed algorithm effectively reduces MEC-related energy consumption compared to benchmark schemes that do not optimize task offloading portions and/or offloading times.

cs.IT↗

Rotatable Antenna-Enabled Spectrum Sharing in Cognitive Radio Systems

Non-fixed flexible antenna architectures, such as fluid antenna system (FAS), movable antenna (MA), and pinching antenna, have garnered significant interest in recent years. Among them, rotatable antenna (RA) technology has recently drawn significant attention in wireless systems owing to its unique ability to exploit additional spatial degrees-of-freedom (DoFs) by dynamically adjusting the three-dimensional (3D) boresight direction of each antenna. In this letter, we propose a new RA-assisted cognitive radio (CR) system designed to achieve efficient spectrum sharing while mitigating interference between primary and secondary communication links. Specifically, we formulate an optimization problem for the joint design of the transmit beamforming and the boresight directions of RAs at the secondary transmitter (ST), aimed at maximizing the received signal-to-interference-plus-noise ratio (SINR) at the secondary receiver (SR), while satisfying both interference constraint at the primary receiver (PR) and the maximum transmit power constraint at the ST. Although the formulated problem is challenging to solve due to its non-convexity and coupled variables, we develop an efficient algorithm by leveraging alternating optimization (AO) and successive convex approximation (SCA) techniques to acquire high-quality solutions. Numerical results demonstrate that the proposed RA-assisted system substantially outperforms conventional benchmark schemes in spectrum-sharing CR systems, validating RA's capability to simultaneously enhance the communication quality at the SR and mitigate interference at the PR.

eess.SP↗

Rotatable Antenna Enabled Wireless Communication and Sensing: Opportunities and Challenges

Non-fixed flexible antenna architectures, such as fluid antenna system (FAS), movable antenna (MA), and pinching antenna, have garnered significant interest in recent years. Among them, rotatable antenna (RA) is an emerging technology that offers significant potential to enhance wireless communication and sensing performance by flexibly adjusting the boresight of directional antennas. Specifically, RA can flexibly reconfigure its boresight direction via mechanical or electronic means, thereby improving communication channel conditions and/or enhancing sensing resolution and range. In this article, we first provide an overview of RA, covering its hardware architectures and radiation pattern characterization. We then illustrate how RA improves communication performance through interference mitigation, spatial multiplexing, and flexible beamforming, as well as sensing capabilities in terms of coverage, resolution, and multi-target/dimensional sensing. Furthermore, we highlight representative applications of RA and discuss key design challenges in RA systems, including rotational scanning scheduling, channel estimation/sensing, boresight optimization, and RA configuration. Finally, both experimental and simulation results are provided to validate the performance gains achieved by RA for both communication and sensing. Leveraging its unique capabilities in flexible antenna/array rotation to adapt to various communication/sensing requirements and channel conditions, RA is poised to become a key enabler of future intelligent, resilient, and agile wireless networks.

cs.IT↗

Efficient Channel Estimation for Rotatable Antenna-Enabled Wireless Communication

Non-fixed flexible antenna architectures, such as fluid antenna system (FAS), movable antenna (MA), and pinching antenna, have garnered significant interest in recent years. Among them, rotatable antenna (RA) is a promising antenna architecture that exploits additional spatial degrees of freedom (DoFs) to enhance the communication performance. To fully obtain the performance gain provided by RAs, accurate channel state information (CSI) is essential for adjusting the orientation/boresight of each antenna. In this letter, we propose an efficient channel estimation scheme for RA communication systems, where the base station (BS) can sequentially and adaptively adjust the orientations of RAs to enrich the environmental observations from diverse angular perspectives, thereby enhancing the channel estimation accuracy. The proposed scheme includes two main procedures that are conducted alternately during each channel training period. Specifically, the first procedure is to estimate the CSI with given RAs' orientations, involving the angle-of-arrivals (AoAs) information and path gains. Then, based on the estimated CSI, the second procedure adjusts the RAs' orientations to maximize the effective channel gain. Simulation results demonstrate that the proposed channel estimation method outperforms other benchmark schemes.

cs.IT↗

Intelligent Rotatable Antenna for Integrated Sensing, Communication, and Computation: Challenges and Opportunities

Integrated sensing, communication, and computation (ISCC) has emerged as a promising paradigm for enabling intelligent services in future sixth-generation (6G) networks. However, existing ISCC systems based on fixed-antenna architectures inherently lack spatial adaptability to cope with the signal degradation and dynamic environmental conditions. Recently, non-fixed flexible antenna architectures, such as fluid antenna system (FAS), movable antenna (MA), and pinching antenna, have garnered significant interest. Among them, intelligent rotatable antenna (IRA) is an emerging technology that offers significant potential to better support the comprehensive services of target sensing, data transmission, and edge computing. This article investigates a novel IRA-enabled ISCC framework to enhance received signal strength, wider coverage, and spatial adaptability to dynamic wireless environments by flexibly adjusting the boresight of directional antennas. Building upon this, we introduce the fundamentals of IRA technology and explore IRA's benefits for improving system performance while providing potential task-oriented applications. Then, we discuss the main design issues and provide solutions for implementing IRA-based ISCC systems. Finally, experimental results are provided to demonstrate the great potential of IRA-enabled ISCC system, thus paving the way for more robust and efficient future wireless networks.

cs.IT↗

A Tutorial on Six-Dimensional Movable Antenna for 6G Networks: Synergizing Positionable and Rotatable Antennas

Six-dimensional movable antenna (6DMA) is a new and revolutionary technique that fully exploits the wireless channel spatial variations at the transmitter/receiver by flexibly adjusting the three-dimensional (3D) positions and/or 3D rotations of antennas/antenna surfaces (sub-arrays), thereby improving the performance of wireless networks cost-effectively without the need to deploy additional antennas. It is thus expected that the integration of new 6DMAs into future sixth-generation (6G) wireless networks will fundamentally enhance antenna agility and adaptability, and introduce new degrees of freedom (DoFs) for system design. Despite its great potential, 6DMA faces new challenges to be efficiently implemented in wireless networks, including corresponding architectures, antenna position and rotation optimization, channel estimation, and system design from both communication and sensing perspectives. In this paper, we provide a tutorial on 6DMA-enhanced wireless networks to address the above issues by unveiling associated new channel models, hardware implementations and practical position/rotation constraints, as well as various appealing applications in wireless networks. Moreover, we discuss two special cases of 6DMA, namely, rotatable 6DMA with fixed antenna position and positionable 6DMA with fixed antenna rotation, and highlight their respective design challenges and applications. We further present prototypes developed for 6DMA-enhanced communication along with experimental results obtained with these prototypes. Finally, we outline promising directions for further investigation.

cs.IT↗

Rotatable Antenna-Enabled Secure Wireless Communication

Rotatable antenna (RA) is a promising technology that exploits new spatial degree-of-freedom (DoF) to improve wireless communication and sensing performance. In this letter, we investigate an RA-enabled secure communication system where confidential information is transmitted from an RA-based access point (AP) to a single-antenna legitimate user in the presence of multiple eavesdroppers. We aim to maximize the secrecy rate by jointly optimizing the transmit beamforming and the deflection angles of all RAs at the AP. Accordingly, we propose an efficient alternating optimization (AO) algorithm to obtain a high-quality suboptimal solution in an iterative manner, where the generalized Rayleigh quotient-based beamforming is applied and the RAs' deflection angles are optimized by the successive convex approximation (SCA) technique. Our simulation results show that the proposed RA-enabled secure communication system achieves a significantly higher secrecy rate as compared to various benchmark schemes.

eess.SP↗

A Demo of Radar Sensing Aided Rotatable Antenna for Wireless Communication System

Rotatable antenna (RA) represents a novel antenna architecture that enhances wireless communication system performance by independently or collectively adjusting each antenna's boresight/orientation. In this demonstration, we develop a prototype of radar sensing-aided rotatable antenna that integrates radar sensing with dynamic antenna orientation to enhance wireless communication performance while maintaining low hardware costs. The proposed prototype consists of a transmitter (TX) module and a receiver (RX) module, both of which employ universal software radio peripherals (USRPs) for transmitting and receiving signals. Specifically, the TX utilizes a laser radar to detect the RX's location and conveys the angle of arrival (AoA) information to its antenna servo, which enables the RA to align its boresight direction with the identified RX. Experimental results examine the effectiveness of the proposed prototype and indicate that the RA significantly outperforms the traditional fixed-antenna system in terms of increasing received signal-to-noise ratio (SNR).

eess.SY↗

Rotatable Antenna Enabled Wireless Communication System with Visual Recognition: A Prototype Implementation

Rotatable antenna (RA) is an emerging technology that has great potential to exploit additional spatial degrees of freedom (DoFs) by flexibly altering the three-dimensional (3D) orientation/boresight of each antenna. In this demonstration, we present a prototype of the RA-enabled wireless communication system with a visual recognition module to evaluate the performance gains provided by the RA in practical environments. In particular, a mechanically-driven RA is developed by integrating a digital servo motor, a directional antenna, and a microcontroller, which enables the dynamic adjustment of the RA orientation. Moreover, the orientation adjustment of the RA is guided by the user's direction information provided by the visual recognition module, thereby significantly enhancing system response speed and self-orientation accuracy. The experimental results demonstrate that the RA-enabled communication system achieves significant improvement in communication coverage performance compared to the conventional fixed antenna system.

eess.SY↗

Rotatable Antennas for Integrated Sensing and Communications

In this letter, we propose to deploy rotatable antennas (RAs) at the base station (BS) to enhance both communication and sensing (C&S) performances, by exploiting a new spatial degree-of-freedom (DoF) offered by array rotation. Specifically, we formulate a multi-objective optimization problem to simultaneously maximize the sum-rate of multiple communication users and minimize the Cramér-Rao bound (CRB) for target angle estimation, by jointly optimizing the transmit beamforming vectors and the array rotation angle at the BS. To solve this problem, we first equivalently decompose it into two subproblems, corresponding to an inner problem for beamforming optimization and an outer problem for array rotation optimization. Although these two subproblems are non-convex, we obtain their high-quality solutions by applying the block coordinate descent (BCD) technique and one-dimensional exhaustive search, respectively. Moreover, we show that for the communication-only case, RAs provide an additional rotation gain to improve communication performance; while for the sensing-only case, the equivalent spatial aperture can be enlarged by RAs for achieving higher sensing accuracy. Finally, numerical results are presented to showcase the performance gains of RAs over fixed-rotation antennas in integrated sensing and communications (ISAC).

eess.SP↗

Intelligent Reflecting Surface-Aided Electromagnetic Stealth over Extended Regions

Compared to traditional electromagnetic stealth (ES) materials, which are effective only within specific frequencies and orientations, intelligent reflecting surface (IRS) technology introduces a novel paradigm for achieving dynamic and adaptive ES by adapting its reflection pattern in real time to neutralize radar probing signals echoed back from the target. In this letter, we study an IRS-aided ES system mounted on an aerial target to evade radar detection admist uncertain/moving radar positions over an extended area. Specifically, we aim to optimize the IRS's passive reflection to minimize the maximum received signal-to-noise ratio (SNR) of the target echo signal in the area. A semi-closed-form solution is derived by first discretizing the continuous spatial frequency deviation to approximate the semi-infinite reflection gain constraint and then leveraging the Lagrange dual method. Simulation results are provided to validate that the proposed IRS-aided ES strategy can consistently reduce the reflection gains for radars located across a large region.

eess.SP↗

Linear Model of RIS-Aided High-Mobility Communication System

Reconfigurable intelligent surface (RIS)-aided vehicle-to-everything (V2X) communication has emerged as a crucial solution for providing reliable data services to vehicles on the road. However, in delay-sensitive or high-mobility communications, the rapid movement of vehicles can lead to random scattering in the environment and time-selective fading in the channel. In view of this, we investigate in this paper an innovative linear model with low-complexity transmitter signal design and receiver detection methods, which boost stability in fast-fading environments and reduce channel training overhead. Specifically, considering the differences in hardware design and signal processing at the receiving end between uplink and downlink communication systems, distinct solutions are proposed. Accordingly, we first integrate the Rician channel introduced by the RIS with the corresponding signal processing algorithms to model the RIS-aided downlink communication system as a Doppler-robust linear model. Inspired by this property, we design a precoding scheme based on the linear model to reduce the complexity of precoding. Then, by leveraging the linear model and the large-scale antenna array at the base station (BS) side, we improve the linear model for the uplink communication system and derive its asymptotic performance in closed-form. Simulation results demonstrate the performance advantages of the proposed RIS-aided high-mobility communication system compared to other benchmark schemes.

eess.SP↗

Modeling and Optimization for Rotatable Antenna Enabled Wireless Communication

Fluid antenna system (FAS)/movable antenna (MA) has emerged as a promising technology to fully exploit the spatial degrees of freedom (DoFs). In this paper, we propose a new rotatable antenna (RA) model, as a simplified implementation of six-dimensional movable antenna (6DMA), to improve the performance of wireless communication systems. Different from conventional fixed antenna, the proposed RA system can independently and flexibly change the three-dimensional (3D) orientation/boresight of each antenna by adjusting its deflection angles to achieve desired channel realizations. Specifically, we study an RA-enabled uplink communication system, where the receive beamforming and the deflection angles of all RAs are jointly optimized to maximize the minimum signal-to-interference-plus-noise ratio (SINR) among all the users. In the special single-user and free-space propagation setup, the optimal deflection angles are derived in closed form with the maximum-ratio combining (MRC) beamformer applied at the base station (BS). In the general multi-user and multi-path setup, we propose an alternating optimization (AO) algorithm to alternately optimize the receive beamforming and the deflection angles in an iterative manner. Simulation results are provided to demonstrate that the proposed RA-enabled system can significantly outperform other benchmark schemes.

cs.IT↗

Joint Size and Placement Optimization for IRS-Aided Communications with Active and Passive Elements

Different types of intelligent reflecting surfaces (IRS) are exploited for assisting wireless communications. The joint use of passive IRS (PIRS) and active IRS (AIRS) emerges as a promising solution owing to their complementary advantages. They can be integrated into a single hybrid active-passive IRS (HIRS) or deployed in a distributed manner, which poses challenges in determining the IRS element allocation and placement for rate maximization. In this paper, we investigate the capacity of an IRS-aided wireless communication system with both active and passive elements. Specifically, we consider three deployment schemes: 1) base station (BS)-HIRS-user (BHU); 2) BS-AIRS-PIRS-user (BAPU); 3) BS-PIRS-AIRS-user (BPAU). Under the line-of-sight channel model, we formulate a rate maximization problem via a joint optimization of the IRS element allocation and placement. We first derive the optimized number of active and passive elements for BHU, BAPU, and BPAU schemes, respectively. Then, low-complexity HIRS/AIRS placement strategies are provided. To obtain more insights, we characterize the system capacity scaling orders for the three schemes with respect to the large total number of IRS elements, amplification power budget, and BS transmit power. Finally, simulation results are presented to validate our theoretical findings and show the performance difference among the BHU, BAPU, and BPAU schemes with the proposed joint design under various system setups.

eess.SP↗

Passive Six-Dimensional Movable Antenna (6DMA)-Assisted Multiuser Communication

Six-dimensional movable antenna (6DMA) is a promising solution for enhancing wireless network capacity through the adjustment of both three-dimensional (3D) positions and 3D rotations of distributed antenna surfaces. Previous works mainly consider 6DMA surfaces composed of active antenna elements, thus termed as active 6DMA. In this letter, we propose a new passive 6DMA system consisting of distributed passive intelligent reflecting surfaces (IRSs) that can be adjusted in terms of 3D position and 3D rotation. Specifically, we study a passive 6DMA-aided multiuser uplink system and aim to maximize the users' achievable sum rate by jointly optimizing the 3D positions, 3D rotations, and reflection coefficients of all passive 6DMA surfaces, as well as the receive beamforming matrix at the base station (BS). To solve this challenging non-convex optimization problem, we propose an alternating optimization (AO) algorithm that decomposes it into three subproblems and solves them alternately in an iterative manner. Numerical results are presented to investigate the performance of the proposed passive 6DMA system under different configurations and demonstrate its superior performance over the traditional fixed-IRS counterpart for both directive and isotropic radiation patterns of passive reflecting elements.

cs.IT↗

6DMA-Aided Cell-Free Massive MIMO Communication

In this letter, we propose a six-dimensional movable antenna (6DMA)-aided cell-free massive multiple-input multiple-output (MIMO) system to fully exploit its macro spatial diversity, where a set of distributed access points (APs), each equipped with multiple 6DMA surfaces, cooperatively serve all users in a given area. Connected to a central processing unit (CPU) via fronthaul links, 6DMA-APs can optimize their combining vectors for decoding the users' information based on either local channel state information (CSI) or global CSI shared among them. We aim to maximize the average achievable sum-rate via jointly optimizing the rotation angles of all 6DMA surfaces at all APs, based on the users' spatial distribution. Since the formulated problem is non-convex and highly non-linear, we propose a Bayesian optimization-based algorithm to solve it efficiently. Simulation results show that, by enhancing signal power and mitigating interference through reduced channel cross-correlation among users, 6DMA-APs with optimized rotations can significantly improve the average sum-rate, as compared to the conventional cell-free network with fixed-position antennas and that with only a single centralized AP with optimally rotated 6DMAs, especially when the user distribution is more spatially diverse.

cs.IT↗

Intelligent Reflecting Surface-Aided Multiuser Communication: Co-design of Transmit Diversity and Active/Passive Precoding

Intelligent reflecting surface (IRS) has become a cost-effective solution for constructing a smart and adaptive radio environment. Most previous works on IRS have jointly designed the active and passive precoding based on perfectly or partially known channel state information (CSI). However, in delay-sensitive or high-mobility communications, it is imperative to explore more effective methods for leveraging IRS to enhance communication reliability without the need for any CSI. In this paper, we investigate an innovative IRS-aided multiuser communication system, which integrates an IRS with its aided multi-antenna base station (BS) to simultaneously serve multiple high-mobility users through transmit diversity and multiple low-mobility users through active/passive precoding. In specific, we first reveal that when dynamically tuning the IRS's common phase-shift shared with all reflecting elements, its passive precoding gain to any low-mobility user remains unchanged. Inspired by this property, we utilize the design of common phase-shift at the IRS for achieving transmit diversity to serve high-mobility users, yet without requiring any CSI at the BS. Meanwhile, the active/passive precoding design is incorporated into the IRS-integrated BS to serve low-mobility users (assuming the CSI is known). Then, taking into account the interference among different users, we formulate and solve a joint optimization problem of the IRS's reflect precoding and the BS's transmit precoding, with the aim of minimizing the total transmit power at the BS.

cs.IT↗

Channel Estimation for XL-IRS Assisted Wireless Systems with Double-sided Visibility Regions

In this paper, we study efficient channel estimation design for an extremely large-scale intelligent reflecting surface (XL-IRS) assisted multi-user communication systems, where both the base station (BS) and users are located in the near-field region of the XL-IRS. Two unique channel characteristics of XL-IRS are considered, namely, the near-field spherical wavefronts and double-sided visibility regions (VRs) at the BS and users, which render the channel estimation for XL-IRS highly challenging. To address this issue, we propose in this paper an efficient three-step XL-IRS channel estimation method. Specifically, in the first step, an anchor node is delicately deployed near the XL-IRS to estimate the cascaded BS-IRS-anchor channel. Then, an efficient VR detection method is devised to estimate the VR information between the BS and XL-IRS. In this way, only the channels from the visible XL-IRS elements to the BS are estimated, thereby reducing the dimension of the cascaded BS-IRS-users channels to be estimated. Third, by leveraging the common BS-IRS channel, the cascaded channels for all users are consecutively estimated accounting for the VRs of the IRS-user channels. Finally, numerical results are provided to demonstrate the effectiveness of our proposed channel estimation scheme as compared to various benchmark schemes.

eess.SP↗