arXiv subjects

Ben C. Buchler

Publications and source records attributed to Ben C. Buchler.

At least 19 recordsLinked to original sources

arXiv2025

Demonstration of a photonic time-frequency Fourier transform and temporal double slit using atomic quantum memory

A quantum memory for light is expected to play a crucial role in quantum communication protocols and distributed quantum computing. In addition to storage and buffering, a quantum memory can be used for manipulations of stored states to allow more complex quantum network operations. In this work, we demonstrate an in-memory Fourier transform using a combination of two well-established quantum memory protocols: Gradient Echo Memory and Electromagnetically Induced Transparency. Our experiment is realised using an ensemble of rubidium atoms that are laser cooled in an elongated magneto-optic trap to maximise optical depth. The results of our time-frequency Fourier transform can be understood as a temporal double slit. We show that the interference between time-separated pulses depends on the relative phase and time between the pulses of light. The use of a quantum memory enables us to illuminate exactly where and how interference occurs between time separated pulses. Time-frequency Fourier manipulation is a well established technique in classical optical systems. Our combination of Fourier manipulation and quantum-compatible memory could be used to bring similar capability to quantum optical systems.

quant-ph↗

arXiv2025

Automating Experimental Optics with Sample Efficient Machine Learning Methods

As free-space optical systems grow in scale and complexity, troubleshooting becomes increasingly time-consuming and, in the case of remote installations, perhaps impractical. An example of a task that is often laborious is the alignment of a high-finesse optical resonator, which is highly sensitive to the mode of the input beam. In this work, we demonstrate how machine learning can be used to achieve autonomous mode-matching of a free-space optical resonator with minimal supervision. Our approach leverages sample-efficient algorithms to reduce data requirements while maintaining a simple architecture for easy deployment. The reinforcement learning scheme that we have developed shows that automation is feasible even in systems prone to drift in experimental parameters, as may well be the case in real-world applications.

physics.optics↗

arXiv2024

Electromagnetically-induced transparency assists the Raman gradient echo memory at moderate detuning, dependent on gradient order

Optical quantum memories are essential for quantum communications and photonic quantum technologies. Ensemble optical memories based on 3-level interactions are a popular basis for implementing these memories. All such memories, however, suffer from loss due to scattering. In off-resonant 3-level interactions, such as the Raman gradient echo memory (GEM), scattering loss can be reduced by a large detuning from the intermediate state. In this work, we show how electromagnetically induced transparency adjacent to the Raman absorption line plays a crucial role in reducing scattering loss, so that maximum efficiency is in fact achieved at a moderate detuning. Furthermore, the effectiveness of the transparency, and therefore the efficiency of GEM, depends on the order in which gradients are applied to store and recall the light. We provide a theoretical analysis and show experimentally how the efficiency depends on gradient order and detuning.

quant-ph↗

arXiv2022

Cancellation of photothermally induced instability in an optical resonator

Optical systems are often subject to parametric instability caused by the delayed response of the optical field to the system dynamics. In some cases, parasitic photothermal effects aggravate the instability by adding new interaction dynamics. This may lead to the possible insurgence or amplification of parametric gain that can further destabilize the system. In this paper, we show that the photothermal properties of an optomechanical cavity can be modified to mitigate or even completely cancel optomechanical instability. By inverting the sign of the photothermal interaction to let it cooperate with radiation pressure, we achieve control of the system dynamics to be fully balanced around a stable equilibrium point. Our study provides a feedback solution for optical control and precise metrological applications, specifically in high-sensitivity resonating systems that are particularly susceptible to parasitic photothermal effects, such as our test case of a macroscopic optical levitation setup. This passive stabilization technique is beneficial for improving system performance limited by photothermal dynamics in broad areas of optics, optomechanics, photonics, and laser technologies.

physics.optics↗

arXiv2022

Observation of cross phase modulation in cold atom gradient echo memory

Strong nonlinear interactions between single photons have important applications in optical quantum information processing. Demonstrations of these interactions in cold atomic ensembles have largely been limited to exploiting slow light generated using electromagnetically induced transparency (EIT). However, these EIT implementations have limited achievable phase shifts due to spontaneous emission. Here, we demonstrate and characterize a scheme free from these limitations using gradient echo memory with inferred single photon phase shifts of $0.07\pm0.02$ $μ\text{rad}$. Excellent agreement with theoretical modelling was observed. Degradation of memory efficiency was observed for large phase shifts but strategies to overcome that are presented.

quant-ph↗

arXiv2022

Efficient, ever-ready quantum memory at room temperature for single photons

Efficient quantum memories will be an essential building block of large scale networked quantum systems and provide a link between flying photonic qubits and atomic or quasi-atomic local quantum processors. To provide a path to scalability avoidance of bulky, difficult to maintain systems such as high vacuum and low temperature cryogenics is imperative. Memory efficiencies above 50% are required to be operating above the quantum no-cloning limit. Such high efficiencies have only been achieved in systems with photon sources tailored to the memory bandwidth. In this paper we explore the combination of an ultralow spectral bandwidth source of single photons from cavity-enhanced spontaneous parametric down-conversion with a gas-ensemble atomic memory. Our rubidium vapour gradient echo memory achieves 84$\pm$3% recall efficiency of single photons: a record for an always-ready, hot, and vacuum system free optical memory.

quant-ph↗

arXiv2021

Search for topological defect dark matter with a global network of optical magnetometers

Ultralight bosons such as axion-like particles are viable candidates for dark matter. They can form stable, macroscopic field configurations in the form of topological defects that could concentrate the dark matter density into many distinct, compact spatial regions that are small compared to the galaxy but much larger than the Earth. Here, we report the results of a search for transient signals from axion-like particle domain walls with the Global Network of Optical Magnetometers for Exotic physics searches (GNOME). We search the data, consisting of correlated measurements from optical atomic magnetometers located in laboratories all over the world, for patterns of signals propagating through the network consistent with domain walls. The analysis of data from a continuous month-long operation of the GNOME finds no statistically significant signals, thus placing experimental constraints on such dark matter scenarios.

astro-ph.CO↗

arXiv2021

Non-Gaussian mechanical motion via single and multi-phonon subtraction from a thermal state

Quantum optical measurement techniques offer a rich avenue for quantum control of mechanical oscillators via cavity optomechanics. In particular, a powerful yet little explored combination utilizes optical measurements to perform heralded non-Gaussian mechanical state preparation followed by tomography to determine the mechanical phase-space distribution. Here, we experimentally perform heralded single- and multi-phonon subtraction via photon counting to a laser-cooled mechanical thermal state with a Brillouin optomechanical system at room temperature, and use optical heterodyne detection to measure the $s$-parameterized Wigner distribution of the non-Gaussian mechanical states generated. The techniques developed here advance the state-of-the-art for optics-based tomography of mechanical states and will be useful for a broad range of applied and fundamental studies that utilize mechanical quantum-state engineering and tomography.

quant-ph↗

arXiv2021

Optical back-action on the photothermal relaxation rate

Photothermal effects can alter the response of an optical cavity, for example, by inducing self-locking behavior or unstable anomalies. The consequences of these effects are often regarded as parasitic and generally cause limited operational performance of the cavity. Despite their importance, however, photothermal parameters are usually hard to characterize precisely. In this work we use an optical cavity strongly coupled to photothermal effects to experimentally observe an optical back-action on the photothermal relaxation rate. This effect, reminiscent of the radiation-pressure-induced optical spring effect in cavity optomechanical systems, uses optical detuning as a fine control to change the photothermal relaxation process. The photothermal relaxation rate of the system can be accordingly modified by more than an order of magnitude. This approach offers an opportunity to obtain precise in-situ estimations of the parameters of the cavity, in a way that is compatible with a wide range of optical resonator platforms. Through this back-action effect we are able to determine the natural photothermal relaxation rate and the effective thermal conductivity of the cavity mirrors with unprecedented resolution.

physics.optics↗

arXiv2021

Observation of Nonlinear Dynamics in an Optical Levitation System

Optical levitation of mechanical oscillators has been suggested as a promising way to decouple the environmental noise and increase the mechanical quality factor. Here, we investigate the dynamics of a free-standing mirror acting as the top reflector of a vertical optical cavity, designed as a testbed for a tripod cavity optical levitation setup. To reach the regime of levitation for a milligram-scale mirror, the optical intensity of the intracavity optical field approaches 3 MW cm$^{-2}$. We identify three distinct optomechanical effects: excitation of acoustic vibrations, expansion due to photothermal absorption, and partial lift-off of the mirror due to radiation pressure force. These effects are intercoupled via the intracavity optical field and induce complex system dynamics inclusive of high-order sideband generation, optical bistability, parametric amplification, and the optical spring effect. We modify the response of the mirror with active feedback control to improve the overall stability of the system.

physics.optics↗

arXiv2021

Single-Phonon Addition and Subtraction to a Mechanical Thermal State

Adding or subtracting a single quantum of excitation to a thermal state of a bosonic system has the counter-intuitive effect of approximately doubling its mean occupation. We perform the first experimental demonstration of this effect outside optics by implementing single-phonon addition and subtraction to a thermal state of a mechanical oscillator via Brillouin optomechanics in an optical whispering-gallery microresonator. Using a detection scheme that combines single-photon counting and optical heterodyne detection, we observe this doubling of the mechanical thermal fluctuations to a high precision. The capabilities of this joint click-dyne detection scheme adds a significant new dimension for optomechanical quantum science and applications.

quant-ph↗

arXiv2020

Optomechanically induced carrier-envelope-phase dependent effects and their analytical solutions

To date, investigations of carrier-envelope-phase (CEP) dependent effects have been limited to optical pulses with few cycles and high intensity, and have not been reported for other types of pulses. Optomechanical systems are shown to have the potential to go beyond these limits. We present an approach using optomechanics to extend the concept of the traditional CEP in the few-cycle regime to mechanical pulses and develop a two-step model to give a physical insight. By adding an auxiliary continuous optical field, we show that a CEP-dependent effect appears even in the multi-cycle regime of mechanical pulses. We obtain the approximated analytical solutions providing full understanding for these optomechanically induced CEP-dependent effects. In addition, our findings show that one can draw on the optomechanical interaction to revive the CEP-dependent effects on optical pulses with an arbitrary number of cycles and without specific intensity requirements. The effects of CEP, broadly extended to encompass few- and multi-cycle optical and mechanical pulses, may stimulate a variety of applications in the preparation of a CEP-stabilized pulse, the generation of ultrasonic pulses with a desired shape, the linear manipulation of optical combs, and more.

physics.optics↗

arXiv2020

Photothermally Induced Transparency

Induced transparency is a common but remarkable effect in optics. It occurs when a strong driving field is used to render an otherwise opaque material transparent. The effect is known as electromagnetically induced transparency in atomic media and optomechanically induced transparency in systems that consist of coupled optical and mechanical resonators. In this work, we introduce the concept of photothermally induced transparency (PTIT). It happens when an optical resonator exhibits non-linear behavior due to optical heating of the resonator or its mirrors. Similar to the established mechanisms for induced transparency, PTIT can suppress the coupling between an optical resonator and a traveling optical field. We further show that the dispersion of the resonator can be modified to exhibit slow or fast light. Because of the relatively slow thermal response, we observe the bandwidth of the PTIT to be $2π\times15.9$ Hz which theoretically suggests a group velocity of as low as $5$ m/s.

physics.optics↗

arXiv2019

Stationary light in atomic media

When ensembles of atoms interact with coherent light fields a great many interesting and useful effects can be observed. In particular, the group velocity of the coherent fields can be modified dramatically. Electromagnetically induced transparency is perhaps the best known example, giving rise to very slow light. Careful tuning of the optical fields can also produce stored light where a light field is mapped completely into a coherence of the atomic ensemble. In contrast to stored light, in which the optical field is extinguished, stationary light is a bright field of light with a group velocity of zero. Stationary light has applications in situations where it is important to maintain an optical field, such as attempts to engineer large nonlinear interactions. In this paper we review the stationary light demonstrations published to date and provide a unified theoretical framework that describes the experimental observations. We also discuss possible applications of stationary light with a particular focus on all-optical phase gates for quantum information technology.

quant-ph↗

arXiv2019

Atomic Localization of Quantum Emitters in Multilayer Hexagonal Boron Nitride

The recent discovery of single-photon emitting defects hosted by the two-dimensional wide band gap semiconductor hexagonal boron nitride (hBN) has inspired a great number of experiments. Key characteristics of these quantum emitters are their capability to operate at room temperature with a high luminosity. In spite of large theoretical and experimental research efforts, the exact nature of the emission remains unresolved. In this work we utilize layer-by-layer etching of multilayer hBN to localize the quantum emitters with atomic precision. Our results suggest the position of the emitters correlates with the fabrication method: emitters formed under plasma treatment are always in close proximity to the crystal surface, while emitters created under electron irradiation are distributed randomly throughout the entire crystal. This disparity could be traced back to the lower kinetic energy of the ions in the plasma compared to the kinetic energy of the electrons in the particle accelerator. The emitter distance to the surface also correlates with the excited state lifetime: near-surface emitters have a shorter compared to emitters deep within the crystal. Finite-difference time-domain and density functional theory simulations show that optical and electronic effects are not responsible for this difference, indicating effects such as coupling to surface defects or phonons might cause the reduced lifetime. Our results pave a way toward identification of the defect, as well as engineering the emitter properties.

cond-mat.mes-hall↗

arXiv2019

Space-compatible cavity-enhanced single-photon generation with hexagonal boron nitride

Sources of pure and indistinguishable single-photons are critical for near-future optical quantum technologies. Recently, color centers hosted by two-dimensional hexagonal boron nitride (hBN) have emerged as a promising platform for high luminosity room temperature single-photon sources. Despite the brightness of the emitters, the spectrum is rather broad and the single-photon purity is not sufficient for practical quantum information processing. Here, we report integration of such a quantum emitter hosted by hBN into a tunable optical microcavity. A small mode volume of the order of $λ^3$ allows us to Purcell enhance the fluorescence, with the observed excited state lifetime shortening. The cavity significantly narrows the spectrum and improves the single-photon purity by suppression of off-resonant noise. We explore practical applications by evaluating the performance of our single-photon source for quantum key distribution and quantum computing. The complete device is compact and implemented on a picoclass satellite platform, enabling future low-cost satellite-based long-distance quantum networks.

quant-ph↗

arXiv2019

Time-reversed and coherently-enhanced memory: A single-mode quantum atom-optic memory without a cavity

The efficiency of an ensemble-based optical quantum memory depends critically on the strength of the atom-light coupling. An optical cavity is an effective method to enhance atom-light coupling strength, with the drawback that cavities can be difficult to integrate into a memory setup. In this work we show coherent enhancement of atom-light coupling via an interference effect. The light to be absorbed into the atomic ensemble is split and used to drive the atoms from opposite ends of the ensemble. We compare this method theoretically to a cavity enhanced scheme and present experimental results for our coherent enhancement in cold rubidium-87 atoms that show an efficiency of $72\pm5\%$ and a storage lifetime of $110\pm 10$ us.

quant-ph↗

arXiv2018

Radiation tolerance of two-dimensional material-based devices for space applications

Characteristic for devices based on two-dimensional materials are their low size, weight and power requirements. This makes them advantageous for use in space instrumentation, including photovoltaics, batteries, electronics, sensors and light sources for long-distance quantum communication. Here, we present for the first time a comprehensive study on combined radiation effects in earth's atmosphere on various devices based on these nanomaterials. Using theoretical modeling packages, we estimate relevant radiation levels and then expose field-effect transistors, single-photon sources and monolayers as building blocks for future electronics to gamma-rays, protons and electrons. The devices show negligible change in performance after the irradiation, suggesting robust suitability for space use. Under excessive $γ$-radiation, however, monolayer WS$_2$ showed decreased defect densities, identified by an increase in photoluminescence, carrier lifetime and a change in doping ratio proportional to the photon flux. The underlying mechanism was traced back to radiation-induced defect healing, wherein dissociated oxygen passivates sulfur vacancies.

cond-mat.mtrl-sci↗