arXiv subjects

Benedikt Bergmann

Publications and source records attributed to Benedikt Bergmann.

13 recordsLinked to original sources

arXiv2026

EXPO: a quantum leap in fast, wide-band X-ray polarimetry for astrophysics

The Enhanced X-ray Polarimetry Observatory (EXPO) is a mission concept proposed to ESA as an M8 candidate, with a prospective launch in 2041. Building on the scientific success of IXPE, EXPO is designed to overcome its two main limitations, the narrow 2-8 keV energy band and the very slow repointing time, and to enable new scientific capabilities. A wide energy band and fast repointing are essential for investigating the hard X-ray emission of magnetars and black-hole binaries, particle acceleration in supernova remnants and pulsar-wind nebulae, radiative transfer in highly magnetized plasmas, X-ray reflection in accretion flows and active galactic nuclei, and the prompt and afterglow emission of gamma-ray bursts and magnetar flares. EXPO comprises five focusing X-ray telescopes and gas photoelectric polarimeters based on the Timepix ASIC family with InGrid amplification, enabling three-dimensional track imaging and operation in the 2-35 keV band through optimized low- and medium-energy detector configurations. The mirror modules use proven electroformed nickel technology with Au-C coatings and an XMM-like focal length of 7.5 m. The polarimeters are complemented by a coded-mask Wide Field Instrument (WFI), derived from SVOM/ECLAIRs for continuous monitoring of a 2 sr field of view; a Spectral Imaging Camera (SIC), based on stacked CMOS and CdTe detectors for broadband imaging spectroscopy and accurate spectro-polarimetric decomposition; and an Instrument Control Unit (ICU) for payload management, onboard WFI image reconstruction, transient identification, and autonomous spacecraft repointing requests. These capabilities extend X-ray polarimetry into the hard X-ray domain and open a new observational window on fast transients, time-domain astrophysics, and multi-messenger astronomy.

astro-ph.IM↗

arXiv2026

Analysis of Mixed Radiation Fields at the MoEDAL Experiment Based on Real-Time Data from a Timepix Detector Network

The primary objective of this work is the determination of fluences and characteristics of fast neutrons, other hadrons, and highly ionizing particles (HIPs) in the environment of the MoEDAL experiment at the Large Hadron Collider. These particles may constitute an experimental background for the passive Nuclear Track Detectors (NTDs) used by MoEDAL to search for tracks potentially produced by magnetic monopoles, in particular by particles indistinguishable in NTD from monopoles. The study is based on data acquired by the Timepix hybrid silicon pixel detector network, which represents the first and only active detector system installed and operated as part of the MoEDAL experiment from 2013 to 2018. The Timepix detector network enables real-time measurements of mixed radiation fields, including the composition, spectral properties, and directional characteristics of individual radiation components across different regions of the MoEDAL experimental area. The paper presents detailed results of the radiation field analysis with emphasis on neutrons and highly ionizing particles, including their directional distributions. The first results demonstrating the spatial tracking capabilities of the Timepix detectors are also reported, illustrating the reconstruction of particle direction and energy-loss profiles from individual detector frames.

physics.ins-det↗

arXiv2025

Comprehensive Study of the Lunar Energetic Particle Environment with LunPAN

LunPAN (Lunar Particle Analyzer Network) is a three-year mission proposal designed to comprehensively map the particle spectra in the lunar radiation field. It aims to provide precise measurements of Galactic Cosmic Rays (GCR), Solar Energetic Particles (SEP), and albedo particles, including charged particles, neutrons, and gamma-rays, originating from the Moon's surface. Therefore it will contribute to fundamental space physics, lunar geology sciences, space weather prediction, and radiation risk assessment for future lunar explorations. This is achieved through two state-of-the-art instruments; Pix.PAN and NeuPix. Pix.PAN is a compact magnetic spectrometer designed for precise measurements of penetrating charged particles, ranging from 100 MeV to 10 GeV. Based on the Mini.PAN project, Pix.PAN employs thin silicon pixel sensors optimized for energy resolution and particle identification. NeuPix is a hybrid active pixel sensor system capable of detecting neutrons, gamma-rays, and lower-energy charged particles between 10MeV and 100 MeV. Utilizing innovative sensor-converter combinations, NeuPix will provide spectral measurements of lunar albedo neutrons and gamma-ray fluxes. Currently, the LunPAN mission is accepted by ESA's "Small Missions for Exploration - Destination the Moon" call for a pre-A phase study. We will discuss mission outline and expected scientific performance of the PixPAN and NeuPix.

astro-ph.IM↗

arXiv2025

Extending the time-over-threshold calibration of Timepix3 for spatial-resolved ion spectroscopy

Hybrid pixel detectors have a well-established array of applications ranging from particle physics to life sciences. The small dimensions of Timepix3 as well as its relatively low energetic expenses make it an intriguing option additionally for ion detection in nuclear physics experiments, as it reveals simultaneously precise temporal, spatial and energetic properties of recorded events from nuclear reactions. Currently, a limiting factor is the electronics behavior at high input charge resulting in improper energy determination of incident heavier ions. While the low-energy per-pixel calibration of Timepix3 is normally performed with the use of photons of up to 60 keV, the characteristic linear range permits a correct extrapolation up to only 150 keV/pixel. We developed a global per-pixel energy correction method involving the use of short-ranged accelerated ions and spectroscopic alpha sources, to suitably extend the energy determination capability of Timepix3 for nuclear ion spectroscopy experiments, where spatial and temporal precision of recorded events are equally crucial. It was found that upon applying this correction, the reliable per-pixel energy range has been increased from the original 150 keV to at least 1.1 MeV, while maintaining the relative energy resolution to better than 2.5% for stopped protons of up to 1.9 MeV and better than 3.1% for alpha particles of 5.5 MeV. Furthermore, to demonstrate the spatial resolution of Timepix3 detectors with silicon sensors, we present alpha-radiography measurements from which we extract the modulation transfer function (MTF) and produce real-world biological sample images.

physics.ins-det↗

arXiv2024

Parallel CPU- and GPU-based connected component algorithms for event building for hybrid pixel detectors

The latest generation of Timepix series hybrid pixel detectors enhance particle tracking with high spatial and temporal resolution. However, their high hit-rate capability poses challenges for data processing, particularly in multidetector configurations or systems like Timepix4. Storing and processing each hit offline is inefficient for such high data throughput. To efficiently group partly unsorted pixel hits into clusters for particle event characterization, we explore parallel approaches for online clustering to enable real-time data reduction. Although using multiple CPU cores improved throughput, scaling linearly with the number of cores, load-balancing issues between processing and I/O led to occasional data loss. We propose a parallel connected component labeling algorithm using a union-find structure with path compression optimized for zero-suppression data encoding. Our GPU implementation achieved a throughput of up to 300 million hits per second, providing a two-order-of-magnitude speedup over compared CPU-based methods while also freeing CPU resources for I/O handling and reducing the data loss.

cs.DC↗

arXiv2024

CIRCUS: an autonomous control system for antimatter, atomic and quantum physics experiments

A powerful and robust control system is a crucial, often neglected, pillar of any modern, complex physics experiment that requires the management of a multitude of different devices and their precise time synchronisation. The AEgIS collaboration presents CIRCUS, a novel, autonomous control system optimised for time-critical experiments such as those at CERN's Antiproton Decelerator and, more broadly, in atomic and quantum physics research. Its setup is based on Sinara/ARTIQ and TALOS, integrating the ALPACA analysis pipeline, the last two developed entirely in AEgIS. It is suitable for strict synchronicity requirements and repeatable, automated operation of experiments, culminating in autonomous parameter optimisation via feedback from real-time data analysis. CIRCUS has been successfully deployed and tested in AEgIS; being experiment-agnostic and released open-source, other experiments can leverage its capabilities.

quant-ph↗

arXiv2024

Electron Emission Channeling for lattice location of radioactive isotopes in single crystals: Improvements from a Timepix3 quad detector and new PyFDD data analysis software

Electron Emission Channeling (EC) is a powerful technique for the investigation of the lattice location of radioactive isotopes implanted into single crystals. After implantation the isotopes occupy certain lattice locations in the crystal, which can in some cases be altered by annealing. Upon decay, the emission of a charged particle, typically a beta, may result in a channeling trajectory when its starting lattice location is aligned with major symmetry axes or planes of the crystal. By measuring the emission anisotropy in the direction of these axes for distinct annealing temperatures, the lattice location of the isotope can be determined with great precision and insightful information can be obtained on how annealing affects the occupied sites. This work reports on the installation of a Timepix3 quad detector and Katherine Gen2 readout in an experimental setup located at ISOLDE at CERN. The large increase in the number of pixels of the Timepix3, in comparison to previously used pad detectors, required more sophisticated tools for data treatment and fitting of channeling patterns. From this need, the PyFDD software was born. Its latest update features an intuitive graphical interface, with tools for noise masking, pattern visualization, simulations browsing, chi-square or maximum likelihood based fits and gamma background correction.

physics.ins-det↗

arXiv2024

Track Lab: extensible data acquisition software for fast pixel detectors, online analysis and automation

Fast, incremental evolution of physics instrumentation raises the question of efficient software abstraction and transferability of algorithms across similar technologies. This contribution aims to provide an answer by introducing Track Lab, a modern data acquisition program focusing on extensibility and high performance. Shipping with documented API and more than 20 standard modules, Track Lab allows complex analysis pipelines to be constructed from simple, reusable building blocks. Thanks to multi-threaded infrastructure, data can be clustered, filtered, aggregated and plotted concurrently in real-time. In addition, full hardware support for Timepix2, Timepix3 pixel detectors and embedded photomultiplier systems enables such analysis to be carried out online during data acquisition. Repetitive procedures can be automated with support for motorized stages and X-ray tubes. Freely distributed on 7 popular operating systems and 2 CPU architectures, Track Lab is a versatile tool for high energy physics research.

physics.ins-det↗

arXiv2022

Improved algorithms for determination of particle directions with Timepix3

Timepix3 pixel detectors have demonstrated great potential for tracking applications. With $256\times 256$ pixels, 55 $\mathrmμ$m pitch and improved resolution in time (1.56 ns) and energy (2 keV at 60 keV), they have become powerful instruments for characterization of unknown radiation fields. A crucial pre-processing step for such analysis is the determination of particle trajectories in 3D space from individual tracks. This study presents a comprehensive comparison of regression methods that tackle this task under the assumption of track linearity. The proposed methods were first evaluated on a simulation and assessed by their accuracy and computational time. Selected methods were then validated with a real-world dataset, which was measured in a well-known radiation field. Finally, the presented methods were applied to experimental data from the Large Hadron Collider. The best-performing methods achieved a mean absolute error of 1.99° and 3.90° in incidence angle $θ$ and azimuth $φ$, respectively. The fastest presented method required a mean computational time of 0.02 ps per track. For all experimental applications, we present angular maps and stopping power spectra.

physics.data-an↗

arXiv2019

Randomized Computer Vision Approaches for Pattern Recognition in Timepix and Timepix3 Detectors

Timepix and Timepix3 are hybrid pixel detectors ($256\times 256$ pixels), capable of tracking ionizing particles as isolated clusters of pixels. To efficiently analyze such clusters at potentially high rates, we introduce multiple randomized pattern recognition algorithms inspired by computer vision. Offering desirable probabilistic bounds on accuracy and complexity, the presented methods are well-suited for use in real-time applications, and some may even be modified to tackle trans-dimensional problems. In Timepix detectors, which do not support data-driven acquisition, they have been shown to correctly separate clusters of overlapping tracks. In Timepix3 detectors, simultaneous acquisition of Time-of-Arrival (ToA) and Time-over-Threshold (ToT) pixel data enables reconstruction of the depth, transitioning from 2D to 3D point clouds. The presented algorithms have been tested on simulated inputs, test beam data from the Heidelberg Ion therapy Center and the Super Proton Synchrotron and were applied to data acquired in the MoEDAL and ATLAS experiments at CERN.

physics.data-an↗

arXiv2019

Real-time Timepix3 data clustering, visualization and classification with a new Clusterer framework

With the next-generation Timepix3 hybrid pixel detector, new possibilities and challenges have arisen. The Timepix3 segments active sensor area of 1.98 $cm^2$ into a square matrix of 256 x 256 pixels. In each pixel, the Time of Arrival (ToA, with a time binning of 1.56 $ns$) and Time over Threshold (ToT, energy) are measured simultaneously in a data-driven, i.e. self-triggered, read-out scheme. This contribution presents a framework for data acquisition, real-time clustering, visualization, classification and data saving. All of these tasks can be performed online, directly from multiple readouts through UDP protocol. Clusters are reconstructed on a pixel-by-pixel decision from the stream of not-necessarily chronologically sorted pixel data. To achieve quick spatial pixel-to-cluster matching, non-trivial data structures (quadtree) are utilized. Furthermore, parallelism (i.e multi-threaded architecture) is used to further improve the performance of the framework. Such real-time clustering offers the advantages of online filtering and classification of events. Versatility of the software is ensured by supporting all major operating systems (macOS, Windows and Linux) with both graphical and command-line interfaces. The performance of the real-time clustering and applied filtration methods are demonstrated using data from the Timepix3 network installed in the ATLAS and MoEDAL experiments at CERN.

physics.ins-det↗

arXiv2017

Precision Luminosity of LHC Proton-Proton Collisions at 13 TeV Using Hit-Counting with TPX Pixel Devices

A network of Timepix (TPX) devices installed in the ATLAS cavern measures the LHC luminosity as a function of time as a stand-alone system. The data were recorded from 13 TeV proton-proton collisions in 2015. Using two TPX devices, the number of hits created by particles passing the pixel matrices was counted. A van der Meer scan of the LHC beams was analysed using bunch-integrated luminosity averages over the different bunch profiles for an approximate absolute luminosity normalization. It is demonstrated that the TPX network has the capability to measure the reduction of LHC luminosity with precision. Comparative studies were performed among four sensors (two sensors in each TPX device) and the relative short-term precision of the luminosity measurement was determined to be 0.1% for 10 s time intervals. The internal long-term time stability of the measurements was below 0.5% for the data-taking period.

physics.ins-det↗

arXiv2015

MPX Detectors as LHC Luminosity Monitor

A network of 16 Medipix-2 (MPX) silicon pixel devices was installed in the ATLAS detector cavern at CERN. It was designed to measure the composition and spectral characteristics of the radiation field in the ATLAS experiment and its surroundings. This study demonstrates that the MPX network can also be used as a self-sufficient luminosity monitoring system. The MPX detectors collect data independently of the ATLAS data-recording chain, and thus they provide independent measurements of the bunch-integrated ATLAS/LHC luminosity. In particular, the MPX detectors located close enough to the primary interaction point are used to perform van der Meer calibration scans with high precision. Results from the luminosity monitoring are presented for 2012 data taken at sqrt(s) = 8 TeV proton-proton collisions. The characteristics of the LHC luminosity reduction rate are studied and the effects of beam-beam (burn-off) and beam-gas (single bunch) interactions are evaluated. The systematic variations observed in the MPX luminosity measurements are below 0.3% for one minute intervals.

physics.ins-det↗