Searcharxiv⌕ Search

arXiv subjects

Benedikt Hampel

Publications and source records attributed to Benedikt Hampel.

6 recordsLinked to original sources

Energy resolving optical transition-edge sensor approaching fundamental limits

Transition-edge sensors (TES) have long held promise for exhibiting single-photon spectral resolution with near-unity detection efficiency, no read noise, and negligible dark counts. A TES detector capable of simultaneously achieving these traits could be revolutionary in fields including quantum computing, quantum sensing, biological imaging, and the detection of life on alien worlds by spectroscopy of exoplanet atmospheres. The applicability of optical TES detectors in these fields has been limited by energy resolution results that differ significantly from the theoretical expectations. We report significant enhancement of the single-photon energy resolution of tungsten (W) TESs by mitigation of athermal phonon loss during the photon-absorption energy down-conversion cascade. Implementing barriers to phonon loss dramatically increased the TES energy resolution (delta E). We achieve delta E of 34 meV - 61 meV, with resolving power (R = E/delta E) of 24 - 43, in a band spanning 1550 nm - 471 nm. All relevant electrical/thermal device parameters are explored in order to model theoretical limits to delta E imposed by noise, and provide an estimate of the athermal phonon trapping factor. Based on a simple model of electrical, thermal, and phonon escape noise sources, we estimate a phonon trapping factor approaching 90% for our best performing TES architecture. These results bring optical TES technology closer to theoretical predictions and to achieving the ambitious goals of photon-starved optical spectroscopy and fault-tolerant photonic quantum computing.

physics.ins-det↗

Reaching the intrinsic performance limits of superconducting nanowire single-photon detectors up to 0.1 mm wide

Superconducting nanowire single-photon detectors (SNSPDs) combine high detection efficiency, low noise, and excellent timing resolution, making them a leading platform for photon-counting applications. However, despite decades of materials and fabrication research, detector performance has never been shown to match theoretical performance expectations. Here, we demonstrate for the first time in situ tuning of a detector from its typical, suboptimal operation, to a regime limited only by material quality, allowing the device to reach its intrinsic performance limit. Our approach is based on current-biased superconducting "rails" placed on either side of the detector that redistribute current across its width to achieve its peak performance. This technique reduces the dark count rate by ten orders of magnitude. Further, we show operation at this intrinsic performance limit for devices up to 0.1 mm wide, and also demonstrate near-unity internal detection efficiency (IDE) at a wavelength of 4um for a 20um-wide detector--a factor of 20 wider than the current state of the art. This work enables future detectors to overcome the Pearl limit for device width, paving the way for arbitrarily large detectors.

cond-mat.supr-con↗

Tungsten Germanide Superconducting Nanowire Single-Photon Detectors with Saturated Internal Detection Efficiency at Wavelengths up to 29 μm

Superconducting nanowire single-photon detectors (SNSPDs) are among the most sensitive single-photon detectors available and have the potential to transform fields ranging from infrared astrophysics to molecular spectroscopy. However, extending their performance into the mid-infrared spectral region - crucial for applications such as exoplanet transit spectroscopy and vibrational fingerprinting of molecules - has remained a major challenge, primarily due to material limitations and scalability constraints. Here, we report on the development of SNSPDs based on tungsten germanide, a novel material system that combines high mid-infrared sensitivity with compatibility for large-scale fabrication. Our detectors exhibit saturated internal detection efficiency at wavelengths up to 29 μm, while using 2.7x thicker films (8 nm vs 3 nm) and up to 4.5x wider nanowires (360 nm vs 80 nm) compared to mid-infrared-optimized SNSPDs fabricated from tungsten silicide. This advance will enable scalable, high-performance single-photon detection in a spectral region that was previously inaccessible, opening new frontiers in remote sensing, thermal imaging, environmental monitoring, molecular physics, and astronomy.

physics.ins-det↗

Misfit layer superconductors, tuneable bulk heterostructures with strong 2D effects

Atomically thin layered materials are systems with zero limit bulk-to-surface ratio. Their physical properties are determined by two-dimensionality and strongly affected by interfacing with other systems. Therefore, they represent an accessible platform for the abundance of quantum effects that can be engineered by combining them into vertical stacks. Two types of layered systems are considered here - artificially prepared (exfoliated) van der Waals nanostructures, and naturally layered systems showing quasi 2D behaviour already in a bulk form. A special class of naturally layered materials is misfit structures combining atomic layers of hexagonal transition metal dichalcogenides and slabs of tetragonal ionic rare-earth monochalcogenides in the same superlattice. Both types of layered systems feature a new state of quantum matter, the Ising superconductivity extremely resilient to external magnetic field. A giant electron doping, natural to the misfit structures, can lead to topological superconductivity. Both systems can also be assembled into heterostructures combining different constituents. Layered 2D heterostructures have a large number of implications for many potential applications in solid-state devices.

cond-mat.supr-con↗

A 64-pixel mid-infrared single-photon imager based on superconducting nanowire detectors

A large-format mid-infrared single-photon imager with very low dark count rates would enable a broad range of applications in fields like astronomy and chemistry. Superconducting nanowire single-photon detectors (SNSPDs) are a mature photon-counting technology as demonstrated by their figures of merit. However, scaling SNSPDs to large array sizes for mid-infrared applications requires sophisticated readout architectures in addition to superconducting materials development. In this work, an SNSPD array design that combines a thermally coupled row-column multiplexing architecture with a thermally coupled time-of-flight transmission line was developed for mid-infrared applications. The design requires only six cables and can be scaled to larger array sizes. The demonstration of a 64-pixel array shows promising results for wavelengths between $\mathrm{3.4\,μm}$ and $\mathrm{10\,μm}$, which will enable the use of this single-photon detector technology for a broad range of new applications.

quant-ph↗

Trap-Integrated Superconducting Nanowire Single-Photon Detectors with Improved RF Tolerance for Trapped-Ion Qubit State Readout

State readout of trapped-ion qubits with trap-integrated detectors can address important challenges for scalable quantum computing, but the strong rf electric fields used for trapping can impact detector performance. Here, we report on NbTiN superconducting nanowire single-photon detectors (SNSPDs) employing grounded aluminum mirrors as electrical shielding that are integrated into linear surface-electrode rf ion traps. The shielded SNSPDs can be successfully operated at applied rf trapping potentials of up to $\mathrm{54\,V_{peak}}$ at $\mathrm{70\,MHz}$ and temperatures of up to $\mathrm{6\,K}$, with a maximum system detection efficiency of $\mathrm{68\,\%}$. This performance should be sufficient to enable parallel high-fidelity state readout of a wide range of trapped ion species in typical cryogenic apparatus.

quant-ph↗