arXiv subjects

Benjamin Bennemann

Publications and source records attributed to Benjamin Bennemann.

14 recordsLinked to original sources

arXiv2026

Highly crystalline superconducting TiN resonators grown on thermally reconstructed sapphire

High quality crystalline growth of a thin film on sapphire requires sufficient substrate preparation, often achieved via the use of aggressive chemical cleaning. Direct thermal reconstruction of the sapphire substrate via a CO$_2$ laser beam may allow for an alternative way to prepare the substrate for epitaxy without the use of any chemical processing. Within this work, we demonstrate that thermal annealing of sapphire into its ($\sqrt{31}$$\times$$\sqrt{31}$)$R$$\pm$9{\deg} reconstruction is a valid alternative preparation technique for sapphire substrates. TiN films grown via plasma-assisted molecular beam epitaxy upon these substrates exhibit greater crystallinity than those grown on chemically cleaned sapphire substrates. Superconducting resonators fabricated from these films exhibit similar performance, with many possessing internal quality factors at single photon levels greater than 10$^6$ for both substrate preparation methods.

cond-mat.supr-con↗

arXiv2026

Proximitized Topological Insulator Charge Island Fabricated via In Situ Multi-Angle Stencil Lithography

Hybrid superconductor-topological insulator (TI) nanostructures constitute a promising materials platform for exploring proximity-induced superconductivity in systems with topologically protected surface states. A key obstacle has been the realization of clean and well-controlled superconductor-TI interfaces, as TI surfaces rapidly degrade under ambient conditions. Here, we introduce a fully in situ, multi-angle stencil lithography technique that enables the fabrication of proximitized charge islands in TIs. The approach combines selective-area growth of (Bi,Sb)$_2$Te$_3$ nanoribbons with angle-controlled deposition of diffusion barriers, superconducting Al, and ultrathin oxide tunnel barriers, allowing scalable fabrication of hybrid nanostructures without post-growth processing. Low-temperature transport measurements reveal robust Coulomb blockade and a pronounced suppression of low-energy conductance which vanishes with magnetic field, consistent with proximity-induced superconductivity in the island. These results establish a versatile nanofabrication platform that enables access to previously unexplored TI-based hybrid quantum devices and opens new routes for investigating superconductivity in topological nanostructures.

cond-mat.mes-hall↗

arXiv2025

On-chip stencil lithography for superconducting qubits

Improvements in circuit design and more recently in materials and surface cleaning have contributed to a rapid development of coherent superconducting qubits. However, organic resists commonly used for shadow evaporation of Josephson junctions (JJs) pose limitations due to residual contamination, poor thermal stability and compatibility under typical surface-cleaning conditions. To provide an alternative, we developed an inorganic SiO$_2$/Si$_3$N$_4$ on-chip stencil lithography mask for JJ fabrication. The stencil mask is resilient to aggressive cleaning agents and it withstands high temperatures up to 1200{\deg}C, thereby opening new avenues for JJ material exploration and interface optimization. To validate the concept, we performed shadow evaporation of Al-based transmon qubits followed by stencil mask lift-off using vapor hydrofluoric acid, which selectively etches SiO$_2$. We demonstrate average $T_1 \approx 75 \pm 11 \mu$s over a 200 MHz frequency range in multiple cool-downs for one device, and $T_1 \approx 44\pm 8 \mu$s for a second device. These results confirm the compatibility of stencil lithography with state-of-the-art superconducting quantum devices and motivate further investigations into materials engineering, film deposition and surface cleaning techniques.

quant-ph↗

arXiv2025

Frustrated Frustration of Arrays with Four-Terminal Nb-Pt-Nb Josephson Junctions

We study the frustration pattern of a square lattice with in-situ fabricated Nb-Pt-Nb four-terminal Josephson junctions. The four-terminal geometry gives rise to a checker board pattern of alternating fluxes f, f' piercing the plaquettes, which stabilizes the Berezinskii-Kosterlitz-Thouless transition even at irrational flux quanta per plaquette, due to an unequal repartition of integer flux sum f+f' into alternating plaquettes. This type of frustrated frustration manifests as a beating pattern of the dc resistance, with state configurations at the resistance dips gradually changing between the conventional zero-flux and half-flux states. Hence, the four-terminal Josephson junction array offers a promising platform to study previously unexplored flux and vortex configurations, and provides an estimate on the spatial expansion of the four-terminal Josephson junction central weak link area.

cond-mat.supr-con↗

arXiv2024

Fabrication and characterization of InAs nanowire-based quantum dot structures utilizing buried bottom gates

Semiconductor nanowires can be utilized to create quantum dot qubits. The formation of quantum dots is typically achieved by means of bottom gates created by a lift-off process. As an alternative, we fabricated flat buried bottom gate structures by filling etched trenches in a Si substrate with sputtered TiN, followed by mechanical polishing. This method achieved gate line pitches as small as 60 nm. The gate fingers have low gate leakage. As a proof of principle, we fabricated quantum dot devices using InAs nanowires placed on the gate fingers. These devices exhibit single electron tunneling and Coulomb blockade.

cond-mat.mes-hall↗

arXiv2024

Two-dimensional photonic crystal cavities in ZnSe quantum well structures

ZnSe and related materials like ZnMgSe and ZnCdSe are promising II-VI host materials for optically mediated quantum information technology such as single photon sources or spin qubits. Integrating these heterostructures into photonic crystal (PC) cavities enables further improvements, for example realizing Purcell-enhanced single photon sources with increased quantum efficiency. Here we report on the successful implementation of two-dimensional (2D) PC cavities in strained ZnSe quantum wells (QW) on top of a novel AlAs supporting layer. This approach overcomes typical obstacles associated with PC membrane fabrication in strained materials, such as cracks and strain relaxation in the corresponding devices. We demonstrate the attainment of the required mechanical stability in our PC devices, complete strain retainment and effective vertical optical confinement. Structural analysis of our PC cavities reveals excellent etching anisotropy. Additionally, elemental mapping in a scanning transmission electron microscope confirms the transformation of AlAs into AlOx by post-growth wet oxidation and reveals partial oxidation of ZnMgSe at the etched sidewalls in the PC. This knowledge is utilized to tailor FDTD simulations and to extract the ZnMgSe dispersion relation with small oxygen content. Optical characterization of the PC cavities with cross-polarized resonance scattering spectroscopy verifies the presence of cavity modes. The excellent agreement between simulation and measured cavity mode energies demonstrates wide tunability of the PC cavity and proves the pertinence of our model. This implementation of 2D PC cavities in the ZnSe material system establishes a solid foundation for future developments of ZnSe quantum devices.

cond-mat.mtrl-sci↗

arXiv2024

Flux-periodic supercurrent oscillations in an Aharonov-Bohm-type nanowire Josephson junction

Phase winding effects in hollow semiconductor nanowires with superconducting shells have been proposed as a route to engineer topological superconducting states. We investigate GaAs/InAs core/shell nanowires with half-shells of epitaxial aluminium as a potential platform for such devices, where the thin InAs shell confines the electron wave function around the GaAs core. With normal contacts we observed pronounced $h/e$ flux periodic oscillations in the magnetoconductance, indicating the presence of a tubular conductive channel in the InAs shell. Conversely, the switching current in Josephson junctions oscillates with approximately half that period, i.e. $h/2e$, indicating transport via Andreev transport processes in the junction enclosing threading magnetic flux. On these structures, we systematically studied the gate-, field-, and temperature-dependent evolution of the supercurrent. Results indicate that Andreev transport processes can occur about the wire circumference indicating full proximitization of the InAs shell from the half-shell superconducting contacts.

cond-mat.mes-hall↗

arXiv2023

Single in situ Interface Characterization Composed of Niobium and a Selectively Grown (Bi$_{1-x}$Sb$_x$)$_2$Te$_3$ Topological Insulator Nanoribbon

With increasing attention in Majorana physics for possible quantum bit applications, a large interest has been developed to understand the properties of the interface between a $s$-type superconductor and a topological insulator. Up to this point the interface analysis was mainly focused on in situ prepared Josephson junctions, which consist of two coupled single interfaces or to ex-situ fabricated single interface devices. In our work we utilize a novel fabrication process, combining selective area growth and shadow evaporation which allows the characterization of a single in situ fabricated Nb/$\mathrm{(Bi_{0.15}Sb_{0.85})_2Te_3}$ nano interface. The resulting high interface transparency is apparent by a zero bias conductance increase by a factor of 1.7. Furthermore, we present a comprehensive differential conductance analysis of our single in situ interface for various magnetic fields, temperatures and gate voltages. Additionally, density functional theory calculations of the superconductor/topological insulator interface are performed in order to explain the peak-like shape of our differential conductance spectra and the origin of the observed smearing of conductance features.

cond-mat.mes-hall↗

arXiv2023

Ballistic surface channels in fully in situ defined Bi$_4$Te$_3$ Josephson junctions with aluminum contacts

In this letter we report on the electrical transport properties of Bi$_4$Te$_3$ in a Josephson junction geometry using superconducting Al electrodes with a Ti interdiffusion barrier. Bi$_4$Te$_3$ is proposed to be a dual topological insulator, for which due to time-reversal and mirror symmetry both a strong topological insulator phase as well as a crystalline topological phase co-exist. The formation of a supercurrent through the Bi$_4$Te$_3$ layer is explained by a two-step process. First, due to the close proximity of the Al/Ti electrodes a superconducting gap is induced within the Bi$_4$Te$_3$ layer right below the electrodes. The size of this gap is determined by analysing multiple Andreev reflections (MARs) identified within the devices differential resistance at low voltage biases. Second, based on the Andreev reflection and reverse Andreev reflection processes a supercurrent establishes in the weak link region in between these two proximity coupled regions. Analyses of the temperature dependency of both the critical current as well as MARs indicate mostly ballistic supercurrent contributions in between the proximitized Bi$_4$Te$_3$ regions even though the material is characterized by a semi-metallic bulk phase. The presence of these ballistic modes gives indications on the topological nature of Bi$_4$Te$_3$.

cond-mat.mes-hall↗

arXiv2021

Integration of topological insulator Josephson junctions in superconducting qubit circuits

The integration of semiconductor Josephson junctions (JJs) in superconducting quantum circuits provides a versatile platform for hybrid qubits and offers a powerful way to probe exotic quasiparticle excitations. Recent proposals for using circuit quantum electrodynamics (cQED) to detect topological superconductivity motivate the integration of novel topological materials in such circuits. Here, we report on the realization of superconducting transmon qubits implemented with $(Bi_{0.06}Sb_{0.94})_{2}Te_{3}$ topological insulator (TI) JJs using ultra-high vacuum fabrication techniques. Microwave losses on our substrates with monolithically integrated hardmask, used for selective area growth of TI nanostructures, imply microsecond limits to relaxation times and thus their compatibility with strong-coupling cQED. We use the cavity-qubit interaction to show that the Josephson energy of TI-based transmons scales with their JJ dimensions and demonstrate qubit control as well as temporal quantum coherence. Our results pave the way for advanced investigations of topological materials in both novel Josephson and topological qubits.

cond-mat.mes-hall↗

arXiv2020

Fully in-situ InAs nanowire Josephson junctions by selective-area growth and shadow evaporation

Josephson junctions based on InAs semiconducting nanowires and Nb superconducting electrodes are fabricated in-situ by a special shadow evaporation scheme for the superconductor electrode. Compared to other metallic superconductors such as Al, Nb has the advantage of a larger superconducting gap which allows operation at higher temperatures and magnetic fields. Our junctions are fabricated by shadow evaporation of Nb on pairs of InAs nanowires grown selectively on two adjacent tilted Si (111) facets and crossing each other at a small distance. The upper wire relative to the deposition source acts as a shadow mask determining the gap of the superconducting electrodes on the lower nanowire. Electron microscopy measurements show that the fully in-situ fabrication method gives a clean InAs/Nb interface. A clear Josephson supercurrent is observed in the current-voltage characteristics, which can be controlled by a bottom gate. The excess current of 0.68 indicates a high junction transparency. Under microwave radiation, pronounced integer Shapiro steps are observed suggesting a sinusoidal current-phase relation. Owing to the large critical field of Nb, the Josephson supercurrent can be maintained to magnetic fields exceeding 1 T. Our results show that in-situ prepared Nb/InAs nanowire contacts are very interesting candidates for superconducting quantum circuits requiring large magnetic fields.

cond-mat.supr-con↗

arXiv2020

Hard-gap spectroscopy in a self-defined mesoscopic InAs/Al nanowire Josephson junction

Superconductor/semiconductor-nanowire hybrid structures can serve as versatile building blocks to realize Majorana circuits or superconducting qubits based on quantized levels such as Andreev qubits. For all these applications it is essential that the superconductor-semiconductor interface is as clean as possible. Furthermore, the shape and dimensions of the superconducting electrodes needs to be precisely controlled. We fabricated self-defined InAs/Al core/shell nanowire junctions by a fully in-situ approach, which meet all these criteria. Transmission electron microscopy measurements confirm the sharp and clean interface between the nanowire and the in-situ deposited Al electrodes which were formed by means of shadow evaporation. Furthermore, we report on tunnel spectroscopy, gate and magnetic field-dependent transport measurements. The achievable short junction lengths,the observed hard-gap and the magnetic field robustness make this new hybrid structure very attractive for applications which rely on a precise control of the number of sub-gap states, like Andreev qubits or topological systems.

cond-mat.mes-hall↗

arXiv2018

Boosting Transparency in Topological Josephson Junctions via Stencil Lithography

Hybrid devices comprised of topological insulator (TI) nanostructures in proximity to s-wave superconductors (SC) are expected to pave the way towards topological quantum computation. Fabrication under ultra-high vacuum conditions is necessary to attain high quality of TI-SC hybrid devices, because the physical surfaces of V-VI three-dimensional TIs suffer from degradation at ambient conditions. Here, we present an in-situ process, which allows to fabricate such hybrids by combining molecular beam epitaxy and stencil lithography. As-prepared Josephson junctions show nearly perfect interface transparency and very large $I_CR_N$ products. The Shapiro response of radio frequency measurements indicates the presence of gapless Andreev bound states, so-called Majorana bound states.

cond-mat.supr-con↗

arXiv2017

MBE Growth of Al/InAs and Nb/InAs Superconducting Hybrid Nanowire Structures

We report on \textit{in situ} growth of crystalline Al and Nb shells on InAs nanowires. The nanowires are grown on Si(111) substrates by molecular beam epitaxy (MBE) without foreign catalysts in the vapor-solid mode. The metal shells are deposited by electron-beam evaporation in a metal MBE. High quality supercondonductor/semiconductor hybrid structures such as Al/InAs and Nb/InAs are of interest for ongoing research in the fields of gateable Josephson junctions and quantum information related research. Systematic investigations of the deposition parameters suitable for metal shell growth are conducted. In case of Al, the substrate temperature, the growth rate and the shell thickness are considered. The substrate temperature as well as the angle of the impinging deposition flux are explored for Nb shells. The core-shell hybrid structures are characterized by electron microscopy and x-ray spectroscopy. Our results show that the substrate temperature is a crucial parameter in order to enable the deposition of smooth Al layers. Contrary, Nb films are less dependent on substrate temperature but strongly affected by the deposition angle. At a temperature of 200°C Nb reacts with InAs, dissolving the nanowire crystal. Our investigations result in smooth metal shells exhibiting an impurity and defect free, crystalline superconductor/InAs interface. Additionally, we find that the superconductor crystal structure is not affected by stacking faults present in the InAs nanowires.

cond-mat.mes-hall↗