arXiv subjects

Benjamin J. Brown

Publications and source records attributed to Benjamin J. Brown.

At least 19 recordsLinked to original sources

arXiv2026

Error correction on an array of superconducting qubits with defective components

A solid-state quantum-computing architecture will require the fabrication of arrays of many coupled qubits. It is inevitable that this process will produce qubits and couplers with varying performance, with some components underperforming due to imperfect fabrication. Quantum error-correction requires high-performing components and hence these defects must be dealt with, either by adapting the code to exclude the defects, or by informing the decoder to accommodate defects in post-processing. Here we implement and compare strategies to operate distance-5 surface codes on a quantum processor consisting of a square-lattice array of 120 superconducting qubits. We demonstrate a dramatic reduction in the probability of a logical error in a memory experiment by excluding underperforming components, compared with both a standard approach of ignoring defects, and a defect-aware decoding approach. We observe up to 2.8X improvement in logical errors per round when excluding defects compared with the standard defect-ignorant approach (1.62% compared to 4.49%). In contrast, defect-aware decoding gives only modest gains. Defects are also expected to be particularly harmful for measurement-based logical operations. Using a stability experiment we show that excluding defects resurrects measurement-based logic gate performance, observing a 6.3% per-round suppression of failure rate when excluding defects, compared to zero suppression otherwise. Furthermore, we show a further substantial decrease in logical errors when using leakage post-selection in combination with our defect exclusion strategies, resulting in a distance-5 code outperforming the best distance-3 in one basis. Our experiments therefore give a proof-of-principle demonstration of the essential utility of defect exclusion methods in the scale-up of solid-state quantum computing approaches.

quant-ph↗

arXiv2026

Scalable quantum error correction tailored for a heavy-hex qubit array

To produce an operable quantum computer that is made with imperfect hardware, we must design and test scalable quantum error correcting codes that are suited for the devices we can build and, in unison, develop decoding strategies that accommodate device-specific noise characteristics. Here, we introduce the \emph{dynamic compass code}, a subsystem code with a novel syndrome extraction cycle, that has a competitive threshold while making efficient use of qubits arranged on a heavy-hex lattice. We use a superconducting qubit array to implement a distance-5 instance of this code, and demonstrate how detailed noise characterisation can boost decoder performance to yield significant improvements in logical error rates. We perform averaged circuit eigenvalue sampling (ACES) to acquire detailed context-dependent error information on all elements of the syndrome extraction process. Furthermore, we leverage soft information produced from measurement devices to augment the decoder with measurement error information and detect leakage errors for exclusion through post-selection. Our noise-informed approach yields up to 38.3\% improvement in the logical error rate of a distance-5 implementation of the dynamic compass code in experiment.

quant-ph↗

arXiv2026

Low-valency scalable quantum error correction with a dynamic compass code

The ongoing development of hardware that is capable of reliably executing general quantum algorithms requires quantum error-correcting codes that are both practical for realisation and rapidly reduce logical error rates as they are scaled up. Here we introduce the dynamic compass code, a code that can be implemented with a modest footprint on the heavy-hex lattice while also demonstrating a threshold. The dynamic code is obtained by choosing a novel measurement schedule for the syndrome extraction circuit of the heavy-hex subsystem code. We numerically evaluate its performance and observe that different choices of schedule can provide a trade-off in protection against logical errors in the $X$ vs $Z$ basis. We also demonstrate that this new measurement schedule provides the code with a threshold for stability experiments. We finally show how the dynamic compass code could be used for fault-tolerant logic by illustrating lattice surgery between code patches.

quant-ph↗

arXiv2026

Constant depth magic state cultivation with Clifford measurements by gauging

Magic states are a scarce resource for two-dimensional qubit stabilizer codes. Magic state cultivation was recently proposed to reduce the cost of magic state preparation by measuring the transversal Clifford operator of the color code. Cultivation achieves $\sim 10^{-9}$ logical error rates for the $d=5$ color code, with substantially lower space-time overhead than magic state distillation. However, due to the $\mathcal{O}(d)$ depth of the Clifford measurement circuit, magic state cultivation becomes impractical for $d>5$. Here, we perform logical $XS^\dagger$ measurements on the color code by gauging a transversal Clifford gate, resulting in a constant-depth logical measurement circuit. We employ repeated gauging measurements with post-selection rather than performing error correction on the Clifford stabilizer code that emerges during the gauging protocol, thus gaining simplicity at the cost of scalability. Our protocol requires a regular square grid connectivity and yields logical error rates comparable to magic state cultivation. The $d=7$ version of our protocol gives access to the $10^{-12}$ logical error rate regime at $0.05\%$ physical error rate while retaining more than $1\%$ of the shots after the equivalent of the cultivation stage.

quant-ph↗

arXiv2026

Intrinsic topological spin probes for electrical imaging of nanoscale energy landscapes

Disorder in magnetic materials prevents reliable control of spin textures and constrains their integration into spintronic devices. Existing methods access disorder only indirectly through external imaging probes or bulk transport measurements, leaving the internal energy landscape inaccessible. We introduce an intrinsic magnetic microscopy method in which a topological spin texture serves as a mobile probe of disorder, directly mapping energy landscapes inside multilayer devices without probe-sample separation. Using a ~10-nm magnetic vortex core confined within a magnetic tunnel junction, we track its displacement with nanometer-scale sensitivity to resolve intrinsic and engineered defect-induced potentials and directly quantify local pinning forces. This framework establishes spin textures as internal spectroscopic probes of disorder and enables quantitative engineering of pinning structures in functional magnetic systems.

cond-mat.mes-hall↗

arXiv2026

A matching decoder for bivariate bicycle codes

The discovery of new quantum error-correcting codes that encode several logical qubits into relatively few physical qubits motivates the development of efficient and accurate methods of decoding these systems. Here, we adopt the minimum-weight perfect matching algorithm, a subroutine invaluable to decoding topological codes, to decode bivariate bicycle codes. Using the equivalence of bivariate bicycle codes to copies of the toric code, we propose a method we call the `cylinder trick' to rapidly find a correction using matching on code symmetries. We benchmark our decoder on the gross code family, cyclic hypergraph-product codes, generalized toric codes, and recently proposed directional codes under code capacity and phenomenological noise models, demonstrating the general applicability of our protocol. For a subset of these codes, we find that our decoder can be significantly improved by augmenting matching with strategies including belief propagation and `over-matching', thus achieving performance competitive with state-of-the-art approaches.

quant-ph↗

arXiv2026

Quantum computing with anyons is fault tolerant

In seminal work (arxiv:quant-ph/9707021) Alexei Kitaev proposed topological quantum computing (arXiv:cond-mat/0010440, arxiv:quant-ph/9707021, arXiv:quant-ph/0001108, arXiv:0707.1889), whereby logic gates of a quantum computer are conducted by creating, braiding and fusing anyonic particles on a two-dimensional plane. Furthermore, he showed the proposal is inherently robust to local perturbations (arXiv:cond-mat/0010440, arxiv:quant-ph/9707021, arXiv:1001.0344, arXiv:1001.4363) when anyons are created as quasiparticle excitations of a topologically ordered lattice model prepared at zero temperature. Over the decades following this proposal there have been considerable technological developments towards the construction of a fault-tolerant quantum computer. Rather than maintaining some target ground state at zero temperature, a modern approach is to actively correct the errors a target state experiences, where we use noisy quantum circuit elements to identify and subsequently correct for deviations from the ideal state. We present an error-correction scheme that enables us to carry out robust universal quantum computation by braiding anyons. We show that our scheme can be carried out on a suitably large device with an arbitrarily small failure rate assuming circuit elements are below some threshold level of local noise. The error-corrected scheme we have developed therefore enables us to carry out fault-tolerant topological quantum computation using modern quantum hardware that is now under development.

quant-ph↗

arXiv2025

Non-Clifford and parallelizable fault-tolerant logical gates on constant and almost-constant rate homological quantum LDPC codes via higher symmetries

We study parallel fault-tolerant quantum computing for families of homological quantum low-density parity-check (LDPC) codes defined on 3-manifolds with constant or almost-constant encoding rate. We derive generic formula for a transversal $T$ gate of color codes on general 3-manifolds, which acts as collective non-Clifford logical CCZ gates on any triplet of logical qubits with their logical-$X$ membranes having a $\mathbb{Z}_2$ triple intersection at a single point. The triple intersection number is a topological invariant, which also arises in the path integral of the emergent higher symmetry operator in a topological quantum field theory: the $\mathbb{Z}_2^3$ gauge theory. Moreover, the transversal $S$ gate of the color code corresponds to a higher-form symmetry supported on a codimension-1 submanifold, giving rise to exponentially many addressable and parallelizable logical CZ gates. A construction of constant-depth circuits of the above logical gates via cup product cohomology operation is also presented for three copies of identical toric codes on arbitrary 3-manifolds. We have developed a generic formalism to compute the triple intersection invariants for 3-manifolds. We further develop three types of LDPC codes supporting such logical gates: (1) A quasi-hyperbolic code from the product of 2D hyperbolic surface and a circle, with almost-constant rate $k/n=O(1/\log(n))$ and $O(\log(n))$ distance; (2) A homological fibre bundle code with $O(1/\log^{\frac{1}{2}}(n))$ rate and $O(\log^{\frac{1}{2}}(n))$ distance; (3) A specific family of 3D hyperbolic codes: the Torelli mapping torus code, constructed from mapping tori of a pseudo-Anosov element in the Torelli subgroup, which has constant rate while the distance scaling is currently unknown. We then show a generic constant-overhead scheme for applying a parallelizable universal gate set with the aid of logical-$X$ measurements.

quant-ph↗

arXiv2025

Color code with a logical control-$S$ gate using transversal $T$ rotations

The color code has been invaluable for the development of the theory of fault-tolerant logic gates using transversal rotations. Three-dimensional examples of the color code have shown us how its structure, specifically the intersection of the supports of logical operators, can give rise to non-Clifford $T$ and $CCZ$ gates. Here we present a color code with a logical control-$S$ gate that is accomplished with transversal $T$ and $T^\dagger$ rotations on its physical qubits.

quant-ph↗

arXiv2025

Generalizing the matching decoder for the Chamon code

Different choices of quantum error-correcting codes can reduce the demands on the physical hardware needed to build a quantum computer. To achieve the full potential of a code, we must develop practical decoding algorithms that can correct errors that have occurred with high likelihood. Matching decoders are very good at correcting local errors while also demonstrating fast run times that can keep pace with physical quantum devices. We implement variations of a matching decoder for a three-dimensional, non-CSS, low-density parity check code known as the Chamon code, which has a non-trivial structure that does not lend itself readily to this type of decoding. The non-trivial structure of the syndrome of this code means that we can supplement the decoder with additional steps to improve the threshold error rate, below which the logical failure rate decreases with increasing code distance. We find that a generalized matching decoder that is augmented by a belief-propagation step prior to matching gives a threshold of 10.5% for depolarizing noise.

quant-ph↗

arXiv2025

Low-overhead magic state distillation with color codes

Fault-tolerant implementation of non-Clifford gates is a major challenge for achieving universal fault-tolerant quantum computing with quantum error-correcting codes. Magic state distillation is the most well-studied method for this but requires significant resources. Hence, it is crucial to tailor and optimize magic state distillation for specific codes from both logical- and physical-level perspectives. In this work, we perform such optimization for two-dimensional color codes, which are promising due to their higher encoding rates compared to surface codes, transversal implementation of Clifford gates, and efficient lattice surgery. We propose two carefully designed distillation schemes based on the 15-to-1 distillation circuit and lattice surgery, differing in their methods for handling faulty rotations. Our first scheme employs faulty T-measurement, achieving infidelities of $O(p^3)$ for physical noise strength $p$. To achieve lower infidelities, our second scheme integrates distillation with 'cultivation' (a distillation-free approach to fault-tolerantly prepare magic states through transversal Clifford measurements). Our second scheme achieves significantly lower infidelities (e.g., $\sim 2 \times 10^{-16}$ at $p = 10^{-3}$), surpassing the capabilities of both cultivation and single-level distillation. Notably, to reach a given target infidelity, our schemes require approximately two orders of magnitude fewer resources than the previous best magic state distillation schemes for color codes.

quant-ph↗

arXiv2025

Dynamical codes for hardware with noisy readouts

Dynamical stabilizer codes may offer a practical route to large-scale quantum computation. Such codes are defined by a schedule of error-detecting measurements, which allows for flexibility in their construction. In this work, we ask how best to optimise the measurement schedule of dynamically condensed colour codes in various limits of noise bias. We take a particular focus on the setting where measurements introduce more noise than unitary and idling operations - a noise model relevant to some hardware proposals. For measurement-biased noise models, we improve code performance by strategically repeating measurements within the schedule. For unbiased or $Z$-biased noise models, we find repeating measurements offers little improvement - somewhat contrary to our expectations - and investigate why this is. To perform this analysis, we generalise a metric called the teraquop footprint to the teraquop volume. This is the product of the number of qubits and number of rounds of measurements required such that the probability of a spacelike or timelike logical error occurring is less than $10^{-12}$. In most cases, we find differences in performance are primarily due to the number of rounds of measurements required, rather than the number of qubits - emphasising the importance of using the teraquop volume in the analysis. Additionally, our results provide another example of the importance of making use of correlated errors when decoding, in that using belief matching rather than minimum-weight perfect matching can turn a worst-performing code under a given noise model into a best-performing code.

quant-ph↗

arXiv2025

Characterising the failure mechanisms of error-corrected quantum logic gates

Mid-circuit measurements used in quantum error correction are essential in quantum computer architecture, as they read out syndrome data and drive logic gates. Here, we use a heavy-hex code prepared on a superconducting qubit array to investigate how different noise sources impact error-corrected logic. First, we identify that idling errors occurring during readout periods are highly detrimental to a quantum memory. We demonstrate significant improvements to the memory by designing and implementing a low-depth syndrome extraction circuit. Second, we perform a stability experiment to investigate the type of failures that can occur during logic gates due to readout assignment errors. We find that the error rate of the stability experiment improves with additional stabilizer readout cycles, revealing a trade-off as additional stability comes at the expense of time over which the memory can decay. We corroborate our results using holistic device benchmarking and by comparison to numerical simulations. Finally, by varying different parameters in our simulations we identify the key noise sources that impact the fidelity of fault-tolerant logic gates, with measurement noise playing a dominant role in logical gate performance.

quant-ph↗

arXiv2025

Universal fault tolerant quantum computation in 2D without getting tied in knots

We show how to perform scalable fault-tolerant non-Clifford gates in two dimensions by introducing domain walls between the surface code and a non-Abelian topological code whose codespace is stabilized by Clifford operators. We formulate a path integral framework which provides both a macroscopic picture for different logical gates as well as a way to derive the associated microscopic circuits. We also show an equivalence between our approach and prior proposals where a 2D array of qubits reproduces the action of a transversal gate in a 3D stabilizer code over time, thus, establishing a new connection between 3D codes and 2D non-Abelian topological phases. We prove a threshold theorem for our protocols under local stochastic circuit noise using a just-in-time decoder to correct the non-Abelian code.

quant-ph↗

arXiv2025

Minimising surface-code failures using a color-code decoder

The development of practical, high-performance decoding algorithms reduces the resource cost of fault-tolerant quantum computing. Here we propose a decoder for the surface code that finds low-weight correction operators for errors produced by the depolarising noise model. The decoder is obtained by mapping the syndrome of the surface code onto that of the color code, thereby allowing us to adopt more sophisticated color-code decoding algorithms. Analytical arguments and exhaustive testing show that the resulting decoder can find a least-weight correction for all weight $d/2$ depolarising errors for even code distance $d$. This improves the logical error rate by an exponential factor $O(2^{d/2})$ compared with decoders that treat bit-flip and dephasing errors separately. We demonstrate this improvement with analytical arguments and supporting numerical simulations at low error rates. Of independent interest, we also demonstrate an exponential improvement in logical error rate for our decoder used to correct independent and identically distributed bit-flip errors affecting the color code compared with more conventional color-code decoding algorithms.

quant-ph↗

arXiv2024

Mitigating errors in logical qubits

Quantum error correcting codes protect quantum information, allowing for large quantum computations provided that physical error rates are sufficiently low. We combine post-selection with surface code error correction through the use of a parameterized family of exclusive decoders, which are able to abort on decoding instances that are deemed too difficult. We develop new numerical sampling methods to quantify logical failure rates with exclusive decoders as well as the trade-off in terms of the amount of post-selection required. For the most discriminating of exclusive decoders, we demonstrate a threshold of 50\% under depolarizing noise for the surface code (or $32(1)\%$ for the fault-tolerant case with phenomenological measurement errors), and up to a quadratic improvement in logical failure rates below threshold. Furthermore, surprisingly, with a modest exclusion criterion, we identify a regime at low error rates where the exclusion rate decays with code distance, providing a pathway for scalable and time-efficient quantum computing with post-selection. We apply our exclusive decoder to the 15-to-1 magic state distillation protocol, and report a $75\%$ reduction in the number of physical qubits required, and a $60\%$ reduction in the total spacetime volume required, including accounting for repetitions required for post-selection. We also consider other applications, as an error mitigation technique, and in concatenated schemes. Our work highlights the importance of post-selection as a powerful tool in quantum error correction.

quant-ph↗

arXiv2024

Low-overhead quantum computing with the color code

Fault-tolerant quantum computation demands significant resources: large numbers of physical qubits must be checked for errors repeatedly to protect quantum data as logic gates are implemented in the presence of noise. We demonstrate that an approach based on the color code can lead to considerable reductions in the resource overheads compared with conventional methods, while remaining compatible with a two-dimensional layout. We propose a lattice surgery scheme that exploits the rich structure of the color-code phase to perform arbitrary pairs of commuting logical Pauli measurements in parallel while keeping the space cost low. Compared to lattice surgery schemes based on the surface code with the same code distance, our approach yields about a $3\times$ improvement in the space-time overhead, obtained from a combination of a $1.5\times$ improvement in spatial overhead together with a $2\times$ speedup due to the parallelisation of commuting logical measurements. Even when taking into account the color code's lower error threshold using current decoders, the overhead is reduced by 10\% at a physical error rate of $10^{-3}$ and by 50\% at $10^{-4}$.

quant-ph↗

arXiv2024

Codesign of quantum error-correcting codes and modular chiplets in the presence of defects

Fabrication errors pose a significant challenge in scaling up solid-state quantum devices to the sizes required for fault-tolerant (FT) quantum applications. To mitigate the resource overhead caused by fabrication errors, we combine two approaches: (1) leveraging the flexibility of a modular architecture, (2) adapting the procedure of quantum error correction (QEC) to account for fabrication defects. We simulate the surface code adapted to qubit arrays with arbitrarily distributed defects to find metrics that characterize how defects affect fidelity. We then determine the impact of defects on the resource overhead of realizing a fault-tolerant quantum computer, on a chiplet-based modular architecture. Our strategy for dealing with fabrication defects demonstrates an exponential suppression of logical failure where error rates of non-faulty physical qubits are ~0.1% in a circuit-based noise model. This is a typical regime where we imagine running the defect-free surface code. We use our numerical results to establish post-selection criteria for building a device from defective chiplets. Using our criteria, we then evaluate the resource overhead in terms of the average number of fabricated physical qubits per logical qubit. We find that an optimal choice of chiplet size, based on the defect rate and target fidelity, is essential to limiting any additional error correction overhead due to defects. When the optimal chiplet size is chosen, at a defect rate of 1% the resource overhead can be reduced to below 3X and 6X respectively for the two defect models we use, for a wide range of target performance. We also determine cutoff fidelity values that help identify whether a qubit should be disabled or kept as part of the error correction code.

quant-ph↗