Searcharxiv⌕ Search

arXiv subjects

Benoît Debord

Publications and source records attributed to Benoît Debord.

6 recordsLinked to original sources
arXiv2026

Rotation angle sensing via polarization-dependent mode superposition in a hollow-core fiber with two-fold symmetry

Hollow-core photonic crystal fibers (HCPCF) have experienced tremendous advancements recently, leading to remarkable demonstrations of transmission loss reduction and deeper understanding of their guidance fundamentals. Indeed, this progress has entailed investigations into various HCPCF designs, allowing for attaining diverse properties of interest such as ultralow loss, polarization filtering, and specific modal operation. Among HCPCFs with tailored modal characteristics are fibers displaying microstructures with modified symmetry, which allow for changing the loss hierarchy between the guided modes, hence favoring the propagation of higher-order modes. In this context, we here demonstrate the realization of an angle sensor utilizing a tubular HCPCF with a two-fold symmetric cladding. This specific fiber design enables the generation of an output intensity profile resulting from the superposition of LP01 and LP11-like modes, whose excitation and resulting output intensity spatial distribution are dependent on the polarization angle of the incident light. Thus, by rotating the input beam's polarization and analyzing the evolution of the resulting output profile, we characterized a rotation angle sensor exhibiting a sensitivity of 25 counts/degree and an estimated resolution of 0.3°. We understand that this work broadens the framework of HCPCF applications, demonstrating that symmetry-modified hollow-core fibers can act as a promising platform for advanced sensing scenarios and polarimetric characterizations.

physics.optics↗
arXiv2022

Hollow-core fibers with reduced surface roughness and ultralow loss in the short-wavelength range

While optical fibers display excellent performances in the infrared, visible and ultraviolet ranges remain poorly addressed by them. Obtaining better fibers for the short-wavelength range has been restricted, in all fiber optics, by scattering processes. In hollow-core fibers, the scattering loss arises from the core roughness and represents the limiting factor in reducing their loss regardless of the fiber cladding confinement power. To attain fibers performing at short wavelengths, it is paramount developing means to minimize the height variations on the fiber microstructure boundaries. Here, we report on the reduction of the core surface roughness of hollow-core fibers by modifying their fabrication technique. In the novel process proposed herein, counter directional gas fluxes are applied within the fiber holes during fabrication to attain an increased shear rate on its microstructure. The effect of the process on the surface roughness has been quantified by optical profilometry and the results showed that the root-mean-square surface roughness has been reduced from 0.40 nm to 0.15 nm. The improvement in the fiber core surface quality entailed fibers with ultralow loss in the short-wavelength range. We report on fibers with record loss values as low as 50 dB/km at 290 nm, 9.7 dB/km at 369 nm, 5.0 dB/km at 480 nm, and 1.8 dB/km at 719 nm. The results reveal this new approach as a promising path for the development of hollow-core fibers guiding at short wavelengths with loss that can potentially be orders of magnitude lower than the ones achievable with their silica-core counterparts.

physics.optics↗
arXiv2020

Low-loss single-mode hybrid-lattice hollow-core photonic crystal fiber

The remarkable recent demonstrations in ultralow loss Inhibited-Coupling (IC) hollow-core photonic crystal fibers (HCPCFs) place them as serious candidates for the next-generation of long-haul fiber optics systems. A hindrance to this prospect, but also to short-haul applications such as micromachining, where stable and high-quality beam delivery is needed, is the challenge to design and fabricate an IC-guiding fiber that combines ultra-low loss, truly and robust single-modeness, and polarization-maintaining operation. Design solutions proposed up to now require a trade-off between low loss and truly single modeness. Here, we propose a novel concept of IC HCPCF for obtaining low-loss and effective single-mode operation. The fiber is endowed with a hybrid cladding composed of a Kagome-tubular lattice (HKT). This new concept of microstructured cladding allows to significantly reduce confinement loss and, at the same time, preserving a truly and robust single-mode operation. Experimental results show a HKT-IC-HCPCF with a minimum loss figure of 1.6 dB/km at 1050 nm and a higher-order modes extinction ratio as high as 47.0 dB for a 10 m long fiber. The robustness of the fiber single-modeness was tested by moving the fiber and varying the coupling conditions. The design proposed herein opens a new route for the accomplishment of HCPCFs that combine robust ultralow loss transmission and single-mode beam delivery and provides new insight into the understanding of IC guidance.

physics.optics↗
arXiv2019

Raman-Kerr Comb Generation Based on Parametric Wave Mixing in Strongly Driven Raman Molecular Gas Medium

We report on experimental and theoretical demonstration of an optical comb spectrum based on a combination of cascaded stimulated Raman scattering and four-wave mixing mediated by Raman-induced nonresonant Kerr-type nonlinearity. This combination enabled to transform a conventional quasi-periodic Raman comb into a comb with a single and smaller frequency spacing. This new phenomenon is realized using a hollow-core photonic crystal fiber filled with 40 bars of deuterium, and pumped with a high-power picosecond laser. The resultant comb shows more than 100 spectral lines spanning over 220 THz from 800 nm to 1710 nm, with a total output power of 7.1 W. In contrast to a pure Raman comb, a 120 THz wide portion of the spectrum exhibits denser and equally-spaced spectral lines with a frequency spacing of around 1.75 THz, which is much smaller than the lowest frequency of the three excited deuterium Raman resonances. A numerical solution of the generalized nonlinear Schrödinger equation in the slowly varying envelope approximation provides very good agreement with the experimental data. The additional sidebands are explained by cascaded four-wave mixing between pre-existing spectral lines, mediated by the large Raman induced optical nonlinearity. The results open a new route to the generation of optical frequency combs that combine large bandwidth and high power controllable frequency spacing.

physics.optics↗
arXiv2016

A Test Resonator for Kagome Hollow-Core Photonic Crystal Fibers for Resonant Rotation Sensing

We build ring resonators to assess the potentialities of Kagome Hollow-Core Photonic Crystal Fibers for future applications to resonant rotation sensing. The large mode diameter of Kagome fibers permits to reduce the free space fiber-to-fiber coupling losses, leading to cavities with finesses of about 30 for a diameter equal to 15 cm. Resonance linewidths of 3.2~MHz with contrasts as large as 89\% are obtained. Comparison with 7-cell photonic band gap (PBG) fiber leads to better finesse and contrast with Kagome fiber. Resonators based on such fibers are compatible with the angular random walk required for medium to high performance rotation sensing. The small amount of light propagating in silica should also permit to further reduce the Kerr-induced non-reciprocity by at least three orders of magnitudes in 7-cell Kagome fiber compared with 7-cell PBG fiber.

physics.optics↗