arXiv subjects

Berk Guler

Publications and source records attributed to Berk Guler.

6 recordsLinked to original sources

arXiv2026

Learning Sim-Grounded Policies for Bimanual Rope Manipulation from Human Teleoperation Data

Deformable Linear Objects (DLOs) such as ropes and cables are widely encountered in both household and industrial applications, yet remain challenging to manipulate due to their infinite-dimensional configuration space and frequent self-occlusion. Imitation learning from teleoperation offers a practical path to bimanual DLO manipulation, but its scalability is limited by human effort, making the choice of observation space critical for generalization from small datasets. In this study, we investigate whether the lack of generalization in egocentric visual policies for the knot-untangling task stems from the observation space itself, rather than from the policy architecture or data scale. We compare two Action Chunking with Transformers policies trained on the same bimanual teleoperation data: a vision-based policy conditioned on two egocentric RGB streams from wrist-mounted cameras, and a state-based policy conditioned on the DLO's 3D particle state, extracted from an initial observation via multi-view fusion and evolved in a particle-based eXtended Position-Based Dynamics simulation. Evaluated open-loop on an unseen rope configuration, the state-based policy outperforms its visual counterpart with a 30.8% reduction in L1 error when predicting the initial grasp-and-pull action, quantifying the observability gap between pixels and physics-consistent state, and pointing toward more data-efficient robot learning for the DLO manipulation task from limited human demonstrations.

cs.RO↗

arXiv2026

AssistDLO: Assistive Teleoperation for Deformable Linear Object Manipulation

Manipulating Deformable Linear Objects (DLOs) is challenging in robotics due to their infinite-dimensional configuration space and complex nonlinear dynamics. In teleoperation, depth uncertainty hinders state perception and reaction. AssistDLO addresses this challenge as an assistive teleoperation framework for DLO manipulation that combines real-time multi-view state estimation, visual assistance (VA), and a geometry-aware shared-autonomy controller based on Control Barrier Functions (SA-CBF). While traditional shared autonomy methods often rely on simple geometric attractors and may fail to preserve DLO geometry, SA-CBF acts as a geometry-aware funnel, facilitating precise grasping while preserving the operator's high-level authority. The framework is evaluated in a bimanual knot-untangling user study (N = 22) using ropes with varying length and rigidity. Results show that the effectiveness of the assistance depends strongly on operator expertise and DLO properties. SA-CBF provides the strongest gains for naive users, acting as a skill equalizer that increases task success from 71% to 88%, and is effective for stiffer ropes. Conversely, expert users prefer VA, and highly compliant, long ropes benefit more from visual support than localized action assistance. Ultimately, these findings demonstrate that effective DLO teleoperation cannot rely on a fixed strategy, highlighting the critical need for adaptive, user-aware, and material-aware shared autonomy.

cs.RO↗

arXiv2026

RopeDreamer: A Kinematic Recurrent State Space Model for Dynamics of Flexible Deformable Linear Objects

The robotic manipulation of Deformable Linear Objects (DLOs) is a fundamental challenge due to the high-dimensional, non-linear dynamics of flexible structures and the complexity of maintaining topological integrity during contact-rich tasks. While recent data-driven methods have utilized Recurrent and Graph Neural Networks for dynamics modeling, they often struggle with self-intersections and non-physical deformations, such as tangling and link stretching. In this paper, we propose a latent dynamics framework that combines a Recurrent State Space Model with a Quaternionic Kinematic Chain representation to enable robust, long-term forecasting of DLO states. By encoding the DLO as a sequence of relative rotations (quaternions) rather than independent Cartesian positions, we inherently constrain the model to a physically valid manifold that preserves link-length constancy. Furthermore, we introduce a dual-decoder architecture that decouples state reconstruction from future-state prediction, forcing the latent space to capture the underlying physics of deformation. We evaluate our approach on a large-scale simulated dataset of complex pick-and-place trajectories involving self-intersections. Our results demonstrate that the proposed model achieves a 40.52% reduction in open-loop prediction error over 50-step horizons compared to the state-of-the-art baseline, while reducing inference time by 31.17%. Our model further maintains superior topological consistency in scenarios with multiple crossings, proving its efficacy as a compositional primitive for long-horizon manipulation planning.

cs.RO↗

arXiv2026

A Safety-Aware Shared Autonomy Framework with BarrierIK Using Control Barrier Functions

Shared autonomy blends operator intent with autonomous assistance. In cluttered environments, linear blending can produce unsafe commands even when each source is individually collision-free. Many existing approaches model obstacle avoidance through potentials or cost terms, which only enforce safety as a soft constraint. In contrast, safety-critical control requires hard guarantees. We investigate the use of control barrier functions (CBFs) at the inverse kinematics (IK) layer of shared autonomy, targeting post-blend safety while preserving task performance. Our approach is evaluated in simulation on representative cluttered environments and in a VR teleoperation study comparing pure teleoperation with shared autonomy. Across conditions, employing CBFs at the IK layer reduces violation time and increases minimum clearance while maintaining task performance. In the user study, participants reported higher perceived safety and trust, lower interference, and an overall preference for shared autonomy with our safety filter. Additional materials available at https://berkguler.github.io/barrierik.

cs.RO↗

arXiv2022

Robot-Assisted Drilling on Curved Surfaces with Haptic Guidance under Adaptive Admittance Control

Drilling a hole on a curved surface with a desired angle is prone to failure when done manually, due to the difficulties in drill alignment and also inherent instabilities of the task, potentially causing injury and fatigue to the workers. On the other hand, it can be impractical to fully automate such a task in real manufacturing environments because the parts arriving at an assembly line can have various complex shapes where drill point locations are not easily accessible, making automated path planning difficult. In this work, an adaptive admittance controller with 6 degrees of freedom is developed and deployed on a KUKA LBR iiwa 7 cobot such that the operator is able to manipulate a drill mounted on the robot with one hand comfortably and open holes on a curved surface with haptic guidance of the cobot and visual guidance provided through an AR interface. Real-time adaptation of the admittance damping provides more transparency when driving the robot in free space while ensuring stability during drilling. After the user brings the drill sufficiently close to the drill target and roughly aligns to the desired drilling angle, the haptic guidance module fine tunes the alignment first and then constrains the user movement to the drilling axis only, after which the operator simply pushes the drill into the workpiece with minimal effort. Two sets of experiments were conducted to investigate the potential benefits of the haptic guidance module quantitatively (Experiment I) and also the practical value of the proposed pHRI system for real manufacturing settings based on the subjective opinion of the participants (Experiment II).

cs.RO↗

arXiv2022

An adaptive admittance controller for collaborative drilling with a robot based on subtask classification via deep learning

In this paper, we propose a supervised learning approach based on an Artificial Neural Network (ANN) model for real-time classification of subtasks in a physical human-robot interaction (pHRI) task involving contact with a stiff environment. In this regard, we consider three subtasks for a given pHRI task: Idle, Driving, and Contact. Based on this classification, the parameters of an admittance controller that regulates the interaction between human and robot are adjusted adaptively in real time to make the robot more transparent to the operator (i.e. less resistant) during the Driving phase and more stable during the Contact phase. The Idle phase is primarily used to detect the initiation of task. Experimental results have shown that the ANN model can learn to detect the subtasks under different admittance controller conditions with an accuracy of 98% for 12 participants. Finally, we show that the admittance adaptation based on the proposed subtask classifier leads to 20% lower human effort (i.e. higher transparency) in the Driving phase and 25% lower oscillation amplitude (i.e. higher stability) during drilling in the Contact phase compared to an admittance controller with fixed parameters.

cs.RO↗