arXiv subjects

Bernhard Ludewigt

Publications and source records attributed to Bernhard Ludewigt.

5 recordsLinked to original sources

arXiv2026

Predicting Neutron Attenuation from Bulk Density and Moisture for Soil Carbon Measurement

Inelastic neutron scattering (INS) enables rapid, non-destructive in situ measurements of soil elemental composition over large soil volumes. Standard INS yields bulk elemental concentrations, but spatially resolved measurements require techniques such as Associated Particle Imaging (API), which pairs neutron detection with coincident alpha detection to reconstruct the location of the neutron interaction. One of the unique advantages of API is its capability to measure all major soil components simultaneously, allowing for the estimation of both bulk density and water content directly from the measured neutron-induced gamma-ray spectra. Accurate interpretation of bulk INS-API data depends on correcting for both gamma-ray and neutron attenuation in soil. Although gamma attenuation can be calculated from known mass attenuation coefficient data and density, neutron attenuation is more complex, depending on neutron energy, soil composition, bulk density, and hydrogen content from water and organic matter. We use Monte Carlo simulations of soils with varied compositions, bulk densities, and water contents to model neutron attenuation and develop a simple predictive model requiring only dry bulk density and volumetric water content. We validate this model experimentally using an INS-API system with controlled soil columns, finding agreement within 10 percent at 30 cm depth. This approach enables practical, field-ready correction of INS-API measurements for neutron attenuation, laying the groundwork for a self-consistent measurement framework that can address the elemental composition of soil carbon assessments.

physics.geo-ph↗

arXiv2023

Center-of-Mass Corrections in Associated Particle Imaging

Associated Particle Imaging (API) utilizes the inelastic scattering of neutrons produced in deuterium-tritium fusion reactions to obtain 3-D isotopic distributions within an object. The locations of the inelastic scattering centers are calculated by measuring the arrival time and position of the associated alpha particle produced in the fusion reactions, and the arrival time of the prompt gamma created in the neutron scattering event. While the neutron and its associated particle move in opposite directions in the center-of-mass (COM) system, in the laboratory system the angle is slightly less than 180 degree, and the COM movement must be taken into account in the reconstruction of the scattering location. Furthermore, the fusion reactions are produced by ions of different momenta, and thus the COM velocity varies, resulting in an uncertainty in the reconstructed positions. In this article, we analyze the COM corrections to this reconstruction by simulating the energy loss of beam ions in the target material and identifying sources of uncertainty in these corrections. We show that an average COM velocity calculated using the ion beam direction and energy can be used in the reconstruction and discuss errors as a function of ion beam energy, composition, and alpha detection location. When accounting for the COM effect, the mean of the reconstructed locations can be considered a correctable systematic error leading to a shift/tilt in the reconstruction. However, the distribution of reconstructed locations also have a spread that will introduce an error in the reconstruction that cannot be corrected. In this article, we will use the known stopping powers of ions in materials and reaction cross sections to examine the reconstruction uncertainties. We also discuss the impact of this effect on our API system.

physics.ins-det↗

arXiv2021

An all-digital associated particle imaging system for the 3D determination of isotopic distributions

Associated particle imaging (API) is a non-destructive nuclear technique for the 3D determination of isotopic distributions. By detecting the alpha particle associated with the emitted neutron in the deuterium-tritium fusion reaction with a position- and time-resolving detector, the direction of the 14.1 MeV neutron and its time of emission can be determined. Employing this method, isotope characteristic gamma rays emitted in inelastic neutron scattering events can be correlated with the neutron interaction location. An API system consisting of a sealed-type neutron generator, gamma detectors, and a position-sensitive alpha detector was designed, constructed, and characterized. The system was tested with common soil elements and shown to be sensitive to 12C, 16O, 28Si, 27Al, and 56Fe. New aspects of our approach are the use of a yttrium-aluminum-perovskite (YAP) scintillator, using a sapphire window instead of a fiber-optic faceplate for light transport to the photomultiplier, and the all-digital data acquisition system. We present a description of the system with simulations and experimental results that show a position resolution on the alpha detector of 1 mm, a depth resolution using a LaBr3 detector of 6.2 cm, and an angular resolution of 4.5 degrees. Additionally, we present single-element gamma response measurements for the elements mentioned above together with a comparison to Monte Carlo simulations (MCNP6).

physics.ins-det↗

arXiv2019

An Associated Particle Imaging System for Soil-Carbon Measurements

We present first results from experimental data showing the capabilities of an Associated Particle Imaging system to measure carbon in soil and other elements. Specifically, we present results from a pre-mixed soil sample containing pure sand (SiO$_2$) and 4% carbon by weight. Because the main isotopes of all those three elements emit characteristic high-energy gamma rays following inelastic neutron scattering, it is possible to measure their distribution with our instrument. A 3D resolution of several centimeters in all dimensions has been demonstrated.

physics.ins-det↗

arXiv2018

Position Sensitive Alpha Detector for an Associate Particle Imaging System

Associated Particle Imaging (API) is a nuclear technique that allows for the nondestructive determination of 3D isotopic distributions. The technique is based on the detection of the alpha particles associated with the neutron emitted in the deuterium-tritium (DT) fusion reaction, which provides information regarding the direction and time of the emitted 14 MeV neutron. Inelastic neutron scattering leads to characteristic gamma-ray emission from certain isotopes, for example C-12, that can be correlated with the neutron interaction location. An API system consisting of a sealed-type neutron generator, gamma detectors, and a position-sensitive alpha detector is under development for the nondestructive quantification of carbon distribution in soils. This paper describes the design of the alpha detector, detector response simulations, and first experimental results. The alpha detector consists of a Yttrium Aluminum Perovskite (YAP) scintillator mounted on the inside of a neutron generator tube. The scintillation light propagates through a sapphire window to a position-sensitive photomultiplier tube mounted on the outside. The 16x16 output signals are connected through a resistive network for a 4-corner readout. The four readout channels are amplified, filtered, and then digitized for the calculation of the alpha position. First test results demonstrate that an excellent alpha position resolution, better than the 1 mm FWHM required by the application, can be achieved with this detector design.

physics.ins-det↗