arXiv subjects

Bertrand Iooss

Publications and source records attributed to Bertrand Iooss.

50 records · Page 3Linked to original sources

arXiv2014

Density modification based reliability sensitivity analysis

Sensitivity analysis of a numerical model, for instance simulating physical phenomena, is useful to quantify the influence of the inputs on the model responses. This paper proposes a new sensitivity index, based upon the modification of the probability density function (pdf) of the random inputs, when the quantity of interest is a failure probability (probability that a model output exceeds a given threshold). An input is considered influential if the input pdf modification leads to a broad change in the failure probability. These sensitivity indices can be computed using the sole set of simulations that has already been used to estimate the failure probability, thus limiting the number of calls to the numerical model. In the case of a Monte Carlo sample, asymptotical properties of the indices are derived. Based on Kullback-Leibler divergence, several types of input perturbations are introduced. The relevance of this new sensitivity analysis method is analysed through three case studies.

math.ST↗

arXiv2014

Visualization tools for uncertainty and sensitivity analyses on thermal-hydraulic transients

In nuclear engineering studies, uncertainty and sensitivity analyses of simulation computer codes can be faced to the complexity of the input and/or the output variables. If these variables represent a transient or a spatial phenomenon, the difficulty is to provide tool adapted to their functional nature. In this paper, we describe useful visualization tools in the context of uncertainty analysis of model transient outputs. Our application involves thermal-hydraulic computations for safety studies of nuclear pressurized water reactors.

stat.AP↗

arXiv2013

Numerical studies of space filling designs: optimization of Latin Hypercube Samples and subprojection properties

Quantitative assessment of the uncertainties tainting the results of computer simulations is nowadays a major topic of interest in both industrial and scientific communities. One of the key issues in such studies is to get information about the output when the numerical simulations are expensive to run. This paper considers the problem of exploring the whole space of variations of the computer model input variables in the context of a large dimensional exploration space. Various properties of space filling designs are justified: interpoint-distance, discrepancy, minimum spanning tree criteria. A specific class of design, the optimized Latin Hypercube Sample, is considered. Several optimization algorithms, coming from the literature, are studied in terms of convergence speed, robustness to subprojection and space filling properties of the resulting design. Some recommendations for building such designs are given. Finally, another contribution of this paper is the deep analysis of the space filling properties of the design 2D-subprojections.

math.ST↗

arXiv2013

A Bayesian approach for global sensitivity analysis of (multi-fidelity) computer codes

Complex computer codes are widely used in science and engineering to model physical phenomena. Furthermore, it is common that they have a large number of input parameters. Global sensitivity analysis aims to identify those which have the most important impact on the output. Sobol indices are a popular tool to perform such analysis. However, their estimations require an important number of simulations and often cannot be processed under reasonable time constraint. To handle this problem, a Gaussian process regression model is built to surrogate the computer code and the Sobol indices are estimated through it. The aim of this paper is to provide a methodology to estimate the Sobol indices through a surrogate model taking into account both the estimation errors and the surrogate model errors. In particular, it allows us to derive non-asymptotic confidence intervals for the Sobol index estimations. Furthermore, we extend the suggested strategy to the case of multi-fidelity computer codes which can be run at different levels of accuracy. For such simulators, we use an extension of Gaussian process regression models for multivariate outputs.

math.ST↗

arXiv2012

Derivative-based global sensitivity measures: general links with Sobol' indices and numerical tests

The estimation of variance-based importance measures (called Sobol' indices) of the input variables of a numerical model can require a large number of model evaluations. It turns to be unacceptable for high-dimensional model involving a large number of input variables (typically more than ten). Recently, Sobol and Kucherenko have proposed the Derivative-based Global Sensitivity Measures (DGSM), defined as the integral of the squared derivatives of the model output, showing that it can help to solve the problem of dimensionality in some cases. We provide a general inequality link between DGSM and total Sobol' indices for input variables belonging to the class of Boltzmann probability measures, thus extending the previous results of Sobol and Kucherenko for uniform and normal measures. The special case of log-concave measures is also described. This link provides a DGSM-based maximal bound for the total Sobol indices. Numerical tests show the performance of the bound and its usefulness in practice.

math.ST↗

arXiv2011

Screening and metamodeling of computer experiments with functional outputs. Application to thermal-hydraulic computations

To perform uncertainty, sensitivity or optimization analysis on scalar variables calculated by a cpu time expensive computer code, a widely accepted methodology consists in first identifying the most influential uncertain inputs (by screening techniques), and then in replacing the cpu time expensive model by a cpu inexpensive mathematical function, called a metamodel. This paper extends this methodology to the functional output case, for instance when the model output variables are curves. The screening approach is based on the analysis of variance and principal component analysis of output curves. The functional metamodeling consists in a curve classification step, a dimension reduction step, then a classical metamodeling step. An industrial nuclear reactor application (dealing with uncertainties in the pressurized thermal shock analysis) illustrates all these steps.

math.ST↗

arXiv2010

Latin hypercube sampling with inequality constraints

In some studies requiring predictive and CPU-time consuming numerical models, the sampling design of the model input variables has to be chosen with caution. For this purpose, Latin hypercube sampling has a long history and has shown its robustness capabilities. In this paper we propose and discuss a new algorithm to build a Latin hypercube sample (LHS) taking into account inequality constraints between the sampled variables. This technique, called constrained Latin hypercube sampling (cLHS), consists in doing permutations on an initial LHS to honor the desired monotonic constraints. The relevance of this approach is shown on a real example concerning the numerical welding simulation, where the inequality constraints are caused by the physical decreasing of some material properties in function of the temperature.

stat.CO↗

arXiv2010

Global sensitivity analysis for models with spatially dependent outputs

The global sensitivity analysis of a complex numerical model often calls for the estimation of variance-based importance measures, named Sobol' indices. Metamodel-based techniques have been developed in order to replace the cpu time-expensive computer code with an inexpensive mathematical function, which predicts the computer code output. The common metamodel-based sensitivity analysis methods are well-suited for computer codes with scalar outputs. However, in the environmental domain, as in many areas of application, the numerical model outputs are often spatial maps, which may also vary with time. In this paper, we introduce an innovative method to obtain a spatial map of Sobol' indices with a minimal number of numerical model computations. It is based upon the functional decomposition of the spatial output onto a wavelet basis and the metamodeling of the wavelet coefficients by the Gaussian process. An analytical example is presented to clarify the various steps of our methodology. This technique is then applied to a real hydrogeological case: for each model input variable, a spatial map of Sobol' indices is thus obtained.

stat.CO↗

arXiv2010

Numerical studies of the metamodel fitting and validation processes

Complex computer codes, for instance simulating physical phenomena, are often too time expensive to be directly used to perform uncertainty, sensitivity, optimization and robustness analyses. A widely accepted method to circumvent this problem consists in replacing cpu time expensive computer models by cpu inexpensive mathematical functions, called metamodels. In this paper, we focus on the Gaussian process metamodel and two essential steps of its definition phase. First, the initial design of the computer code input variables (which allows to fit the metamodel) has to honor adequate space filling properties. We adopt a numerical approach to compare the performance of different types of space filling designs, in the class of the optimal Latin hypercube samples, in terms of the predictivity of the subsequent fitted metamodel. We conclude that such samples with minimal wrap-around discrepancy are particularly well-suited for the Gaussian process metamodel fitting. Second, the metamodel validation process consists in evaluating the metamodel predictivity with respect to the initial computer code. We propose and test an algorithm which optimizes the distance between the validation points and the metamodel learning points in order to estimate the true metamodel predictivity with a minimum number of validation points. Comparisons with classical validation algorithms and application to a nuclear safety computer code show the relevance of this new sequential validation design.

math.NA↗

arXiv2009

Global Sensitivity Analysis of Stochastic Computer Models with joint metamodels

The global sensitivity analysis method, used to quantify the influence of uncertain input variables on the response variability of a numerical model, is applicable to deterministic computer code (for which the same set of input variables gives always the same output value). This paper proposes a global sensitivity analysis methodology for stochastic computer code (having a variability induced by some uncontrollable variables). The framework of the joint modeling of the mean and dispersion of heteroscedastic data is used. To deal with the complexity of computer experiment outputs, non parametric joint models (based on Generalized Additive Models and Gaussian processes) are discussed. The relevance of these new models is analyzed in terms of the obtained variance-based sensitivity indices with two case studies. Results show that the joint modeling approach leads accurate sensitivity index estimations even when clear heteroscedasticity is present.

stat.ME↗

arXiv2009

Controlled stratification for quantile estimation

In this paper we propose and discuss variance reduction techniques for the estimation of quantiles of the output of a complex model with random input parameters. These techniques are based on the use of a reduced model, such as a metamodel or a response surface. The reduced model can be used as a control variate; or a rejection method can be implemented to sample the realizations of the input parameters in prescribed relevant strata; or the reduced model can be used to determine a good biased distribution of the input parameters for the implementation of an importance sampling strategy. The different strategies are analyzed and the asymptotic variances are computed, which shows the benefit of an adaptive controlled stratification method. This method is finally applied to a real example (computation of the peak cladding temperature during a large-break loss of coolant accident in a nuclear reactor).

stat.ME↗

arXiv2008

Global sensitivity analysis of computer models with functional inputs

Global sensitivity analysis is used to quantify the influence of uncertain input parameters on the response variability of a numerical model. The common quantitative methods are applicable to computer codes with scalar input variables. This paper aims to illustrate different variance-based sensitivity analysis techniques, based on the so-called Sobol indices, when some input variables are functional, such as stochastic processes or random spatial fields. In this work, we focus on large cpu time computer codes which need a preliminary meta-modeling step before performing the sensitivity analysis. We propose the use of the joint modeling approach, i.e., modeling simultaneously the mean and the dispersion of the code outputs using two interlinked Generalized Linear Models (GLM) or Generalized Additive Models (GAM). The ``mean'' model allows to estimate the sensitivity indices of each scalar input variables, while the ``dispersion'' model allows to derive the total sensitivity index of the functional input variables. The proposed approach is compared to some classical SA methodologies on an analytical function. Lastly, the proposed methodology is applied to a concrete industrial computer code that simulates the nuclear fuel irradiation.

stat.AP↗

arXiv2008

An efficient methodology for modeling complex computer codes with Gaussian processes

Complex computer codes are often too time expensive to be directly used to perform uncertainty propagation studies, global sensitivity analysis or to solve optimization problems. A well known and widely used method to circumvent this inconvenience consists in replacing the complex computer code by a reduced model, called a metamodel, or a response surface that represents the computer code and requires acceptable calculation time. One particular class of metamodels is studied: the Gaussian process model that is characterized by its mean and covariance functions. A specific estimation procedure is developed to adjust a Gaussian process model in complex cases (non linear relations, highly dispersed or discontinuous output, high dimensional input, inadequate sampling designs, ...). The efficiency of this algorithm is compared to the efficiency of other existing algorithms on an analytical test case. The proposed methodology is also illustrated for the case of a complex hydrogeological computer code, simulating radionuclide transport in groundwater.

stat.AP↗

arXiv2008

Calculations of Sobol indices for the Gaussian process metamodel

Global sensitivity analysis of complex numerical models can be performed by calculating variance-based importance measures of the input variables, such as the Sobol indices. However, these techniques, requiring a large number of model evaluations, are often unacceptable for time expensive computer codes. A well known and widely used decision consists in replacing the computer code by a metamodel, predicting the model responses with a negligible computation time and rending straightforward the estimation of Sobol indices. In this paper, we discuss about the Gaussian process model which gives analytical expressions of Sobol indices. Two approaches are studied to compute the Sobol indices: the first based on the predictor of the Gaussian process model and the second based on the global stochastic process model. Comparisons between the two estimates, made on analytical examples, show the superiority of the second approach in terms of convergence and robustness. Moreover, the second approach allows to integrate the modeling error of the Gaussian process model by directly giving some confidence intervals on the Sobol indices. These techniques are finally applied to a real case of hydrogeological modeling.

stat.ME↗