arXiv subjects

Bhavini Singh

Publications and source records attributed to Bhavini Singh.

4 recordsLinked to original sources

arXiv2021

Shock generated vorticity in spark discharges

Spark discharges induce a complex flow field consisting of a shock wave at early times (~ 1 $μ$ s), a pair of vortex rings, and a hot gas kernel. The vortex rings entrain ambient gas into the hot gas kernel and control its cooling and expansion. In this work, we investigate the shock wave's contribution in producing the vortex ring vorticity. We analyze high-speed (700 kHz) schlieren images of the shock wave for a range of electrical energies to measure the shock properties and estimate shock velocity and curvature. These measurements are combined with a model to calculate the vorticity generated. The measurements show that the highest vorticity is generated near the peak shock curvature location, and the shock curvature and strength increase with electrical energy deposited. A comparison of the vorticity estimated from the model to vorticity measurements from stereoscopic particle image velocimetry shows the results to be statistically equivalent. This suggests that the shock curvature and velocity contribute to the vortex rings induced by spark discharges.

physics.flu-dyn↗

arXiv2020

Filamentary Surface Plasma Discharge Flow Length and Time Scales

Nanosecond Surface Dielectric Barrier Discharge (ns-SDBDs) are a class of plasma actuators that utilize a high-voltage pulse of nanosecond duration between two surface-mounted electrodes to create an electrical breakdown of air, along with rapid heating. These actuators usually produce multiple filaments when operated at high pulse frequencies, and the rapid heating leads to the formation of shock waves and complex flow fields. In this work we replicate a single filament of the ns-SDBDs and characterize the induced flow using velocity measurements from particle image velocimetry and density measurements from background-oriented schlieren. The discharge is produced by a high voltage electrical pulse between two copper electrodes on an acrylic base. A hot gas kernel characterizes the flow field formed close to the electrodes that expands and cools over time and a vortex ring that propagates away from the surface while entraining cold ambient fluid. The gas density deficit inside the kernel displays a power-law decay over time. Based on the observations, we develop a simplified theoretical model based on vortex-driven cooling and perform a scaling analysis to obtain the induced flow length and time scales. The results show that the cooling process's time scales correspond to a circulation-based time scale of the vortex ring, and the length scale of the kernel corresponds to the vortex ring radius. These findings can guide the choice of optimal filament spacing and pulse frequencies in the design, deployment, and operation of nanosecond surface dielectric barrier discharges (ns-SDBDs) for flow control.

physics.flu-dyn↗

arXiv2020

Vortex rings drive entrainment and cooling in flow induced by a spark discharge

Spark plasma discharges induce vortex rings and a hot gas kernel. We develop a model to describe the late stage of the spark induced flow and the role of the vortex rings in the entrainment of cold ambient gas and the cooling of the hot gas kernel. The model is tested in a plasma-induced flow, using density and velocity measurements obtained from simultaneous stereoscopic particle image velocimetry (S-PIV) and background oriented schlieren (BOS). We show that the spatial distribution of the hot kernel follows the motion of the vortex rings, whose radial expansion increases with the electrical energy deposited during the spark discharge. The vortex ring cooling model establishes that entrainment in the convective cooling regime is induced by the vortex rings and governs the cooling of the hot gas kernel, and the rate of cooling increases with the electrical energy deposited during the spark discharge.

physics.flu-dyn↗

arXiv2019

Two Regime Cooling in Flow Induced by a Spark Discharge

The cooling process associated with the flow induced by a spark plasma discharge generated between a pair of electrodes is measured using stereoscopic particle image velocimetry (S-PIV) and background oriented schlieren (BOS). Density measurements show that the hot gas kernel initially cools fast by convective cooling, followed by a slower cooling process. The cooling rates during the fast regime range from being 2 to 10 times those in the slower regime. An analytical model is developed to relate the cooling observed in the fast regime from BOS, to the total entrainment of cold ambient fluid per unit volume of the hot gas kernel, measured from S-PIV. The model calculates the cooling ratio to characterize the cooling process and shows that the cooling ratio estimated from the density measurements are in close agreement with those calculated from the entrainment. These measurements represent the first ever quantitative density and velocity measurements of the flow induced by a spark discharge and reveal the role of entrainment on the cooling of the hot gas kernel. These results underscore that convective cooling of the hot gas kernel, in the fast regime, leads to approximately 50% of the cooling and occurs within the first millisecond of the induced flow.

physics.flu-dyn↗