arXiv subjects

Bhuvana Srinivasan

Publications and source records attributed to Bhuvana Srinivasan.

18 recordsLinked to original sources

arXiv2025

General kinetic ion induced electron emission model for metallic walls applied to biased Z-pinch electrodes

A kinetic ion induced electron emission (IIEE) model for general applications is developed to obtain the emitted electron energy spectrum for a distribution of ion impacts on a metallic surface. We assume an ionization cascade mechanism and use empirical models for the ion and electron stopping powers. The emission spectrum and the secondary electron yield (SEY) are validated for a variety of materials. The IIEE model is used to study the effect of IIEE on the plasma-material interactions of Z-pinch electrodes. Un-magnetized Boltzmann-Poisson simulations are performed for a Z-pinch plasma doubly bounded by two biased copper electrodes with and without IIEE at bias potentials from 0 to 9 kV. At the anode, the SEY decreases from 0 to 1 kV, but then increases at higher bias potentials. At the cathode, the SEY is much larger due to higher energy ion bombardment and grows with bias potential. As the bias potential increases, the emitted cathode electrons are accelerated to higher energies into the domain collisionally heating the plasma. Above 1 kV, the heating is strong enough to increase the plasma potential. Despite SEY greater than 1, only a classical sheath forms as opposed to a space-charge limited or inverse sheath due to the emitted electron flux not reaching the space charge current saturation limits. Furthermore, the current in the emissionless cases saturates to a value lower than experiment. With IIEE, the current does not saturate and continues to increase with the 4 kV case matching most closely with experiment.

physics.plasm-ph↗

arXiv2025

Effects of oxidation and impurities in lithium surfaces on the emitting wall plasma sheath

Use of lithium as a surface coating in fusion devices improves plasma performance, but the change in wall properties affects the secondary electron emission properties of the material. Lithium oxidizes easily, which drives the emission yield well above unity. We present here simulations demonstrating the change in sheath structure from monotonic to the nonmonotonic space-charge limited sheath using an energy-dependent data-driven emission model which self-consistently captures both secondary emission and backscattering populations. Increased secondary electron emission from the material has ramifications for the degradation and erosion of the wall. Results shows that the oxidation leads to an increased electron flux into the wall, and a reduced ion flux. The net transfer of energy to the surface is significantly greater for the oxidized case than for the pure lithium case. High reflection rates of low-energy backscattered particles leads to a high re-emission rate at the wall.

physics.plasm-ph↗

arXiv2024

The effect of spatially-varying collision frequency on the development of the Rayleigh-Taylor instability

The Rayleigh-Taylor (RT) instability is ubiquitously observed, yet has traditionally been studied using ideal fluid models. Collisionality can vary strongly across the fluid interface, and previous work demonstrates the necessity of kinetic models to completely capture dynamics in certain collisional regimes. Where previous kinetic simulations used spatially- and temporally-constant collision frequency, this work presents 5-dimensional (two spatial, three velocity dimensions) continuum-kinetic simulations of the RT instability using a more realistic spatially-varying collision frequency. Three cases of collisional variation are explored for two Atwood numbers: low to intermediate, intermediate to high, and low to high. The low to intermediate case exhibits no RT instability growth, while the intermediate to high case is similar to a fluid limit kinetic case with interface widening biased towards the lower collisionality region. A novel contribution of this work is the low to high collisionality case that shows significantly altered instability growth through upward movement of the interface and damped spike growth due to increased free-streaming particle diffusion in the lower region. Contributions to the energy-flux from the non-Maxwellian portions of the distribution function are not accessible to fluid models and are greatest in magnitude in the spike and regions of low collisionality. Increasing the Atwood number results in greater RT instability growth and reduced upward interface movement. Deviation of the distribution function from Maxwellian is inversely proportional to collision frequency and concentrated around the fluid interface. The linear phase of RT instability growth is well-described by theoretical linear growth rates accounting for viscosity and diffusion.

physics.flu-dyn↗

arXiv2024

Plasma sheath studies using a physical treatment of electron emission from a dielectric wall

When a plasma sheath forms next to a dielectric wall, material properties determine electron absorption and reflection from the surface, impacting the sheath formation and structure. The low energy regime of this interaction is often not considered rigorously in emissive sheath simulations, but may be modeled from quantum mechanical first principles, and has important applications to plasma thrusters and fusion devices. In this work, low energy electron reflection from the wall is implemented as a boundary condition in a continuum kinetic framework and the sheath is simulated for dielectric material parameters in high and low emission cases. The results presented here demonstrate that the material parameters can have significant effect on the resulting sheath profile and particle distribution functions. Surfaces with high reflection rates see the formation of a space-charge limited sheath.

physics.plasm-ph↗

arXiv2024

Energy-dependent implementation of secondary electron emission models in continuum kinetic sheath simulations

The plasma-material interactions present in multiple fusion and propulsion concepts between the flow of plasma through a channel and a material wall drive the emission of secondary electrons. This emission is capable of altering the fundamental structure of the sheath region, significantly changing the expected particle fluxes to the wall. The emission spectrum is separated into two major energy regimes, a peak of elastically backscattered primary electrons at the incoming energy, and cold secondary electrons inelastically emitted directly from the material. The ability of continuum kinetic simulations to accurately represent the secondary electron emission is limited by relevant models being formulated in terms of monoenergetic particle interactions which cannot be applied directly to the discrete distribution function. As a result, rigorous implementation of energy-dependent physics is often neglected in favor of simplified, constant models. We present here a novel implementation of semi-empirical models in the boundary of continuum kinetic simulations which allows the full range of this emission to be accurately captured in physically-relevant regimes.

physics.plasm-ph↗

arXiv2023

An investigation of shock formation versus shock mitigation of colliding plasma jets

This work studies the interaction between colliding plasma jets to understand regimes in which jet merging results in shock formation versus regimes in which the shock formation is mitigated due to the collisionless interpenetration of the jets. A kinetic model is required for this study because fluid models will always produce a shock upon the collision of plasma jets. The continuum-kinetic, Vlasov-Maxwell-Dougherty model with one velocity dimension is used to accurately capture shock heating, along with a novel coupling with a moment equation to evolve perpendicular temperature for computational efficiency. As a result, this relatively inexpensive simulation can be used for detailed scans of the parameter space towards predictions of shocked versus shock-mitigated regimes, which is of interest for several fusion concepts such as plasma-jet-driven magneto-inertial fusion (PJMIF), high-energy-density plasmas, astrophysical phenomena, and other laboratory plasmas. The initial results obtained using this approach are in agreement with the preliminary outcomes of the Plasma Liner Experiment (PLX).

physics.plasm-ph↗

arXiv2023

Resolving the mystery of electron perpendicular temperature spike in the plasma sheath

A large family of plasmas has collisional mean-free-path much longer than the non-neutral sheath width, which scales with the plasma Debye length. The plasmas, particularly the electrons, assume strong temperature anisotropy in the sheath. The temperature in the sheath flow direction ($T_{e\parallel}$) is lower and drops towards the wall as a result of the decompressional cooling by the accelerating sheath flow. The electron temperature in the transverse direction of the flow field ($T_{e\perp}$) not only is higher but also spikes up in the sheath. This abnormal behavior of $T_{e\perp}$ spike is found to be the result of a negative gradient of the parallel heat flux of transverse degrees of freedom ($q_{es}$) in the sheath. The non-zero heat flux $q_{es}$ is induced by pitch-angle scattering of electrons via either their interaction with self-excited electromagnetic waves in a nearly collisionless plasma or Coulomb collision in a collisional plasma, or both in the intermediate regime of plasma collisionality.

physics.plasm-ph↗

arXiv2023

Continuum kinetic investigation of the impact of bias potentials in the current saturation regime on sheath formation

In this work, we examine sheath formation in the presence of bias potentials in the current saturation regime for pulsed power fusion experiments. It is important to understand how the particle and heat fluxes at the wall may impact the wall material and affect electrode degradation. Simulations are performed using the 1X-1V Boltzmann-Poisson system for a proton-electron plasma in the presence of bias potentials ranging from 0 to 10 kV. The results indicate that the sheath near the high potential wall remains generally the same as that of a classical sheath without the presence of a bias potential. However, the sheath near the low potential wall becomes more prominent with a larger potential drop, a significant decrease of electron density, and larger sheath lengths. The spatially constant current density increases to a saturation value with increasing bias potential. The current is dominated by the ions at the low potential wall and by the electrons at the high potential wall. The heat flux increases to a saturation value at the high potential wall and tends to zero at the low potential wall with increasing bias potential. The results trend with theory with differences attributed to the simplified assumptions in the theory and the kinetic effects considered in the simulations. Due to the significant computational cost of a well resolved 1X-2V simulation, only one such simulation is performed for the 5 kV case showing higher current.

physics.plasm-ph↗

arXiv2022

Electron cyclotron drift instability and anomalous transport: two-fluid moment theory and modeling

In the presence of a strong electric field perpendicular to the magnetic field, the electron cross-field (E$\times$B) flow relative to the unmagnetized ions can cause the Electron Cyclotron Drift Instability (ECDI) due to resonances of the ion acoustic mode and the electron cyclotron harmonics. This occurs in collisionless shock ramps in space, and in $\rm{E \times B}$ discharge devices such as Hall thrusters. ECDI can induce an electron flow parallel to the background E field at a speed greatly exceeding predictions by classical collision theory. Such anomalous transport may lead to particle thermalization at space shocks, and may cause unfavorable plasma flows towards the walls of E$\times$B devices. The development of ECDI and anomalous transport is often considered fully-kinetic. In this work, however, we demonstrate that a reduced variant of this instability, and more importantly, the associated anomalous transport, can be treated self-consistently in a two-fluid framework without any collision. By treating electrons and ions on an equal footing, the free energy allows the growth of an anomalous electron flow parallel to the background E field. We first present linear analyses of the instability in the two-fluid 5- and 10-moment models, and compare them against the fully-kinetic theory. At lower temperatures, the two-fluid fastest-growing mode is in good agreement with the kinetic result. Also, by including more ($>=10$) moments, secondary (and possibly higher) unstable branches can be recovered. The dependence of the instability on various parameters is also explored. We then carry out direct numerical simulations of the cross-field setup using the 5-moment model. The growth of the instability and the anomalous transport is confirmed. Finally, 5-moment and Vlasov simulations using identical parameters in the lower-temperature regime are performed, showing reasonable agreement.

physics.plasm-ph↗

arXiv2022

A kinetic interpretation of the classical Rayleigh-Taylor instability

Rayleigh-Taylor (RT) instabilities are prevalent in many physical regimes ranging from astrophysical to laboratory plasmas and have primarily been studied using fluid models, the majority of which have been ideal fluid models. This work is the first of its kind to present a 5-dimensional (2 spatial dimensions, 3 velocity space dimensions) simulation using the continuum-kinetic model to study the effect of the collisional mean-free-path and transport on the instability growth. The continuum-kinetic model provides noise-free access to the full particle distribution function permitting a detailed investigation of the role of kinetic physics in hydrodynamic phenomena such as the RT instability. For long mean-free-path, there is no RT instability growth, but as collisionality increases, particles relax towards the Maxwellian velocity distribution, and the kinetic simulations reproduce the fluid simulation results. An important and novel contribution of this work is in the intermediate collisional cases that are not accessible with traditional fluid models and require kinetic modeling. Simulations of intermediate collisional cases show that the RT instability evolution is significantly altered compared to the highly collisional fluid-like cases. Specifically, the growth rate of the intermediate collisionality RT instability is lower than the high collisionality case while also producing a significantly more diffused interface. The higher moments of the distribution function play a more significant role relative to inertial terms for intermediate collisionality during the evolution of the RT instability interface. Particle energy-flux is calculated from moments of the distribution and shows that transport is significantly altered in the intermediate collisional case and deviates much more so from the high collisionality limit of the fluid regime.

physics.plasm-ph↗

arXiv2022

Bohm criterion of plasma sheaths away from asymptotic limit

The plasma exit flow speed at the sheath entrance is constrained by the Bohm criterion. The so-called Bohm speed regulates the plasma particle and power exhaust fluxes to the wall, and it is commonly deployed as a boundary condition to exclude the sheath region in quasi-neutral plasma modeling. Here the Bohm criterion analysis is performed in the intermediate plasma regime away from the previously known limiting cases of adiabatic laws and the asymptotic limit of infinitesimal Debye length in a finite-size system, using the transport equations of an anisotropic plasma. The resulting Bohm speed has explicit dependence on local plasma heat flux, temperature isotropization, and thermal force. Comparison with kinetic simulations demonstrates its accuracy over the plasma-sheath transition region in which quasineutrality is weakly perturbed and Bohm criterion applies.

physics.plasm-ph↗

arXiv2021

The effect of viscosity and resistivity on Rayleigh-Taylor instability induced mixing in magnetized high energy density plasmas

This work numerically investigates the role of viscosity and resistivity on Rayleigh-Taylor instabilities in magnetized high-energy-density (HED) plasmas for a high Atwood number and high plasma beta regimes surveying across plasma beta and magnetic Prandtl numbers. The numerical simulations are performed using the visco-resistive magnetohydrodynamic (MHD) equations. Results presented here show that the inclusion of self-consistent viscosity and resistivity in the system drastically changes the growth of the Rayleigh-Taylor instability (RTI) as well as modifies its internal structure at smaller scales. It is seen here that the viscosity has a stabilizing effect on the RTI. Moreover, the viscosity inhibits the development of small scale structures and also modifies the morphology of the tip of the RTI spikes. On the other hand, the resistivity reduces the magnetic field stabilization supporting the development of small scale structures. The morphology of the RTI spikes is seen to be unaffected by the presence of resistivity in the system. An additional novelty of this work is in the disparate viscosity and resistivity profiles that may exist in HED plasmas and their impact on RTI growth, morphology, and the resulting turbulence spectra. Furthermore, this work shows that the dynamics of the magnetic field is independent of viscosity and likewise the resistivity does not affect the dissipation of enstrophy and kinetic energy. In addition, power-law scalings of enstrophy, kinetic energy, and magnetic field energy are provided in both injection range and inertial sub-range which could be useful for understanding RTI induced turbulent mixing in HED laboratory and astrophysical plasmas and could aid in the interpretation of observations of RTI-induced turbulence spectra.

physics.plasm-ph↗

arXiv2020

A boundary value "reservoir problem" and boundary conditions for multi-moment multifluid simulations of sheaths

Multifluid simulations of plasma sheaths are increasingly used to model a wide variety of problems in plasma physics ranging from global magnetospheric flows around celestial bodies to plasma-wall interactions in thrusters and fusion devices. For multifluid problems, accurate boundary conditions to model an absorbing wall that resolves a classical sheath remains an open research area. This work justifies the use of vacuum boundary conditions for absorbing walls to show comparable accuracy between a multifluid sheath and lower moments of a continuum-kinetic sheath.

physics.plasm-ph↗

arXiv2020

An affine reconstructed algorithm for diffusion on triangular grids using the nodal discontinuous Galerkin method

This work discusses the application of an affine reconstructed nodal DG method for unstructured grids of triangles. Solving the diffusion terms in the DG method is non-trivial due to the solution representations being piecewise continuous. Hence, the diffusive flux is not defined on the interface of elements. The proposed numerical approach reconstructs a smooth solution in a parallelogram that is enclosed by the quadrilateral formed by two adjacent triangle elements. The interface between these two triangles is the diagonal of the enclosed parallelogram. Similar to triangles, the mapping of parallelograms from a physical domain to a reference domain is an affine mapping, which is necessary for an accurate and efficient implementation of the numerical algorithm. Thus, all computations can still be performed on the reference domain, which promotes efficiency in computation and storage. This reconstruction does not make assumptions on choice of polynomial basis. Reconstructed DG algorithms have previously been developed for modal implementations of the convection-diffusion equations. However, to the best of the authors' knowledge, this is the first practical guideline that has been proposed for applying the reconstructed algorithm on a nodal discontinuous Galerkin method with a focus on accuracy and efficiency. The algorithm is demonstrated on a number of benchmark cases as well as a challenging substantive problem in HED hydrodynamics with highly disparate diffusion parameters.

physics.comp-ph↗

arXiv2019

Boundary Conditions for Continuum Simulations of Wall-bounded Kinetic Plasmas

Continuum kinetic simulations of plasmas, where the distribution function of the species is directly discretized in phase-space, permits fully kinetic simulations without the statistical noise of particle-in-cell methods. Recent advances in numerical algorithms have made continuum kinetic simulations computationally competitive. This work presents the first continuum kinetic description of high-fidelity wall boundary conditions that utilize the readily available particle distribution function. The boundary condition is realized through a reflection function that can capture a wide range of cases from simple specular reflection to more involved first principles models. Examples with detailed discontinuous Galerkin implementation are provided for secondary electron emission using phenomenological and first-principles quantum-mechanical models. Results presented in this work demonstrate the effect of secondary electron emission on a classical plasma sheath.

physics.comp-ph↗

arXiv2018

Role of electron inertia and electron/ion finite Larmor radius effects in low-beta, magneto-Rayleigh-Taylor instability

The magneto-Rayleigh-Taylor (MRT) instability has been investigated in great detail in previous work using magnetohydrodynamic and kinetic models for low-beta plasmas. The work presented here extends previous studies of this instability to regimes where finite-Larmor-Radius (FLR) effects may be important. Comparisons of the MRT instability are made using a 5-moment and a 10-moment two-fluid model, the two fluids being ions and electrons. The 5-moment model includes Hall stabilization whereas the 10-moment model includes Hall and FLR stabilization. Results are presented for these two models using different electron mass to understand the role of electron inertia in the late-time nonlinear evolution of the MRT instability. For the 5-moment model, the late-time nonlinear MRT evolution does not significantly depend on the electron inertia. However, when FLR stabilization is important, the 10-moment results show that a lower ion-to-electron mass ratio (i.e. larger electron inertia) under-predicts the energy in high-wavenumber modes due to larger FLR stabilization.

physics.plasm-ph↗

arXiv2017

Nonlinear saturation of the Weibel instability

The growth and saturation of magnetic fields due to the Weibel instability (WI) have important implications for laboratory and astrophysical plasmas, and this has drawn significant interest recently. Since the WI can generate a large magnetic field from no initial field, the maximum magnitudes achieved can have significant consequences for a number of applications. Hence, an understanding of the detailed dynamics driving the nonlinear saturation of the WI is important. This work considers the nonlinear saturation of the WI when counter-streaming populations of initially unmagnetized electrons are perturbed by a magnetic field oriented perpendicular to the direction of streaming. Previous works have found magnetic trapping to be important and connected electron skin depth spatial scales to the nonlinear saturation of the WI. 2 Results presented in this work are consistent with these findings for a high-temperature case. However, using a high-order continuum kinetic simulation tool, this work demonstrates that, when the electron populations are colder, a significant electrostatic potential develops that works with the magnetic field to create potential wells. The electrostatic field develops due to transverse flows induced by the WI, and in some cases is strengthened by a secondary instability. This field plays a key role in saturation of the WI for colder populations. The role of the electrostatic potential in Weibel instability saturation has not been studied in detail previously.

physics.plasm-ph↗

arXiv2017

Continuum Kinetic and Multi-Fluid Simulations of Classical Sheaths

The kinetic study of plasma sheaths is critical, among other things, to understand the deposition of heat on walls, the effect of sputtering, and contamination of the plasma with detrimental impurities. The plasma sheath also provides a boundary condition and can often have a significant global impact on the bulk plasma. In this paper, kinetic studies of classical sheaths are performed with the continuum code, Gkeyll, that directly solves the Vlasov-Poisson/Maxwell equations. The code uses a novel version of the finite-element discontinuous Galerkin (DG) scheme that conserves energy in the continuous-time limit. The electrostatic field is computed using the Poisson equation. Ionization and scattering collisions are included, however, surface effects are neglected. The aim of this work is to introduce the continuum-kinetic method and compare its results to those obtained from an already established finite-volume multi-fluid model also implemented in Gkeyll. Novel boundary conditions on the fluids allow the sheath to form without specifying wall fluxes, so the fluids and fields adjust self-consistently at the wall. The work presented here demonstrates that the kinetic and fluid results are in agreement for the momentum flux, showing that in certain regimes, a multi-fluid model can be a useful approximation for simulating the plasma boundary. There are differences in the electrostatic potential between the fluid and kinetic results. Further, the direct solutions of the distribution function presented here highlight the non-Maxwellian distribution of electrons in the sheath, emphasizing the need for a kinetic model.

physics.plasm-ph↗