SearcharxivSearch

arXiv subjects

Biel Martinez

Publications and source records attributed to Biel Martinez.

13 recordsLinked to original sources

Disorder-independent hole spin manipulation by hopping

Spin manipulation by hopping has recently emerged as a promising strategy to control hole spins in quantum dots using exclusively baseband control, thereby mitigating power dissipation and high-frequency management constraints in large-scale architectures. Unlike conventional approaches such as electron dipole spin resonance (EDSR), this mechanism exploits dot-to-dot variations of the spin precession axes to enable spin rotations. However, it is intrinsically disorder-dependent: in the absence of sufficient variability, the precession axes remain aligned and spin manipulation becomes ineffective. This fundamental reliance on disorder raises concerns regarding its compatibility with the long-term evolution of spin-qubit platforms toward improved material quality, cleaner interfaces, and enhanced device reproducibility. Here, we numerically assess the viability of spin manipulation by hopping as a function of disorder strength and demonstrate that its implementation is indeed increasingly constrained as disorder is reduced. To overcome this limitation, we propose an alternative strategy based on hopping between intentionally squeezed quantum dots. This approach retains the advantages of baseband control while being independent of disorder and robust against moderate variability, thereby offering improved prospects for scalable hole-spin quantum computing architectures.

cond-mat.mes-hall

Valley Splittings in Si/SiGe Heterostructures from First Principles

We compute valley splittings in Si/SiGe superlattices using ab initio density functional theory (DFT). This first-principle approach is expected to provide an excellent description of interfaces, strains, and atomistic disorder without empirically fitted parameters. We benchmark atomistic tight-binding (TB) and the ``$2k_0$'' theory within the effective mass (EM) approximation against DFT. We show that DFT supports the main conclusions of the 2$k_0$ theory, but reveals some limitations of semi-empirical methods such as the EM and TB, in particular about the description of atomistic disorder. The DFT calculations also highlight the effects of strong valley-orbit mixing at large valley splittings. Nevertheless, TB and the 2$k_0$ theory shall provide reasonable valley splitting statistics in many heterostructures of interest for spin qubit devices.

cond-mat.mtrl-sci

Variability of hole spin qubits in planar Germanium

Hole spin qubits in Ge/GeSi heterostructures benefit from the clean environment of epitaxial interfaces and from the intrinsic spin-orbit coupling that enables efficient electrical control, which makes them promising candidates for quantum computation. However, spin-orbit coupling also enhances the sensitivity to electrical disorder, potentially increasing variability. In this work, we perform numerical simulations in a realistic device geometry to quantify the variability of the charge and spin properties of Ge qubits induced by charge traps at the SiGe/oxide interfaces. We show that while the variability of charge properties remains moderate, spin properties (g-factors and Rabi frequencies) show significant dispersion. We explore the implications of this variability for large-scale architectures, and provide guidelines to minimize variability both in terms of interface quality requirements and optimal operation strategies.

cond-mat.mes-hall

A foundry-fabricated spin qubit unit cell with in-situ dispersive readout

Spin qubits based on semiconductor quantum dots are a promising prospect for quantum computation because of their high coherence times and gate fidelities. However, scaling up those structures to the numbers required by fault-tolerant quantum computing is currently hampered by a number of issues. One of the main issues is the need for single-shot low-footprint qubit readout. Here, we demonstrate the single-shot in situ measurement of a compact qubit unit-cell. The unit cell is composed of two electron spins with a controllable exchange interaction. We report initialization, single-shot readout and two-electron entangling gate. The unit cell was successfully operated at up to 1 K, with state-of-the-art charge noise levels extracted using free induction decay. With its integrated readout and high stability, this foundry fabricated qubit unit cell demonstrates strong potential for scalable quantum computing architectures.

cond-mat.mes-hall

Strain engineering in Ge/GeSi spin qubits heterostructures

The heavy-holes in Ge/GeSi heterostructures show highly anisotropic gyromagnetic response with in-plane $g$-factors $g_{x,y}^*\lesssim 0.3$ and out-of-plane $g$-factor $g_z^*\gtrsim 10$. As a consequence, Rabi hot spots and dephasing sweet lines are extremely sharp and call for a careful alignment of the magnetic field in Ge spin qubit devices. We investigate how the $g$-factors can be engineered by strains. We show that uniaxial strains can raise in-plane $g$-factors above unity while leaving $g_z^*$ essentially constant. We discuss how the etching of an elongated mesa in a strained buffer can actually induce uniaxial (but inhomogeneous) strains in the heterostructure. This broadens the operational magnetic field range and enables spin manipulation by shuttling holes between neighboring dots with different $g$-factors.

cond-mat.mes-hall

Combining multiplexed gate-based readout and isolated CMOS quantum dot arrays

Semiconductor quantum dot arrays are a promising platform to perform spin-based error-corrected quantum computation with large numbers of qubits. However, due to the diverging number of possible charge configurations combined with the limited sensitivity of large-footprint charge sensors, achieving single-spin occupancy in each dot in a growing quantum dot array is exceedingly complex. Therefore, to scale-up a spin-based architecture we must change how individual charges are readout and controlled. Here, we demonstrate single-spin occupancy of each dot in a foundry-fabricated array by combining two methods. 1/ Loading a finite number of electrons into the quantum dot array; simplifying electrostatic tuning by isolating the array from the reservoirs. 2/ Deploying multiplex gate-based reflectometry to dispersively probe charge tunneling and spin states without charge sensors or reservoirs. Our isolated arrays probed by embedded multiplex readout can be readily electrostatically tuned. They are thus a viable, scalable approach for spin-based quantum architectures.

cond-mat.mes-hall

Mitigating variability in epitaxial-heterostructure-based spin-qubit devices by optimizing gate layout

The scalability of spin qubit devices is conditioned by qubit-to-qubit variability. Disorder in the host materials indeed affects the wave functions of the confined carriers, which leads to variations in their charge and spin properties. Charge disorder in the amorphous oxides is particularly detrimental owing to its long-range influence. Here we analyze the effects of charge traps at the semiconductor/oxide interface, which are generally believed to play a dominant role in variability. We consider multiple random distributions of these interface traps and numerically calculate their impact on the chemical potentials, detuning and tunnel coupling of two adjacent quantum dots in SiGe heterostructure. Our results highlight the beneficial screening effect of the metal gates. The surface of the heterostructure shall, therefore, be covered as much as possible by the gates in order to limit variability. We propose an alternative layout with tip-shaped gates that maximizes the coverage of the semiconductor/oxide interface and outperforms the usual planar layout in some regimes. This highlights the importance of design in the management of device-to-device variability.

cond-mat.mes-hall

Linear-in-momentum spin orbit interactions in planar Ge/GeSi heterostructures and spin qubits

We investigate the existence of linear-in-momentum spin-orbit interactions in the valence band of Ge/GeSi heterostructures using an atomistic tight-binding method. We show that symmetry breaking at the Ge/GeSi interfaces gives rise to a linear Dresselhaus-type interaction for heavy-holes. This interaction results from the heavy-hole/light-hole mixings induced by the interfaces and can be captured by a suitable correction to the minimal Luttinger-Kohn, four bands $\vec{k}\cdot\vec{p}$ Hamiltonian. It is dependent on the steepness of the Ge/GeSi interfaces, and is suppressed if interdiffusion is strong enough. Besides the Dresselhaus interaction, the Ge/GeSi interfaces also make a contribution to the in-plane gyromagnetic $g$-factors of the holes. The tight-binding calculations also highlight the existence of a small linear Rashba interaction resulting from the couplings between the heavy-hole/light-hole manifold and the conduction band enabled by the low structural symmetry of Ge/GeSi heterostructures. These interactions can be leveraged to drive the hole spin. The linear Dresselhaus interaction may, in particular, dominate the physics of the devices for out-of-plane magnetic fields. When the magnetic field lies in-plane, it is, however, usually far less efficient than the $g$-tensor modulation mechanisms arising from the motion of the dot in non-separable, inhomogeneous electric fields and strains.

cond-mat.mes-hall

Hole spin driving by strain-induced spin-orbit interactions

Hole spins in semiconductor quantum dots can be efficiently manipulated with radio-frequency electric fields owing to the strong spin-orbit interactions in the valence bands. Here we show that the motion of the dot in inhomogeneous strain fields gives rise to linear Rashba spin-orbit interactions (with spatially dependent spin-orbit lengths) and g-factor modulations that allow for fast Rabi oscillations. Such inhomogeneous strains may build up spontaneously due to process and cool down stress. We discuss spin qubits in Ge/GeSi heterostructures as an illustration. We highlight that Rabi frequencies can be enhanced by one order of magnitude by shear strain gradients as small as $3\times 10^{-6}$ nm$^{-1}$ within the dots. This underlines that spin in solids can be very sensitive to strains and opens the way for strain engineering in hole spin devices for quantum information and spintronics.

cond-mat.mes-hall

Electrical manipulation of a single electron spin in CMOS with micromagnet and spin-valley coupling

For semiconductor spin qubits, complementary-metal-oxide-semiconductor (CMOS) technology is the ideal candidate for reliable and scalable fabrication. Making the direct leap from academic fabrication to qubits fabricated fully by industrial CMOS standards is difficult without intermediate solutions. With a flexible back-end-of-line (BEOL) new functionalities such as micromagnets or superconducting circuits can be added in a post-CMOS process to study the physics of these devices or achieve proof of concepts. Once the process is established it can be incorporated in the foundry-compatible process flow. Here, we study a single electron spin qubit in a CMOS device with a micromagnet integrated in the flexible BEOL. We exploit the synthetic spin orbit coupling (SOC) to control the qubit via electric field and we investigate the spin-valley physics in the presence of SOC where we show an enhancement of the Rabi frequency at the spin-valley hotspot. Finally, we probe the high frequency noise in the system using dynamical decoupling pulse sequences and demonstrate that charge noise dominates the qubit decoherence in this range.

cond-mat.mes-hall

Hole spin manipulation in inhomogeneous and non-separable electric fields

The usual models for electrical spin manipulation in semiconductor quantum dots assume that the confinement potential is separable in the three spatial dimensions and that the AC drive field is homogeneous. However, the electric field induced by the gates in quantum dot devices is not fully separable and displays significant inhomogeneities. Here, we address the electrical manipulation of hole spins in semiconductor heterostructures subject to inhomogeneous vertical electric fields and/or in-plane AC electric fields. We consider Ge quantum dots electrically confined in a Ge/GeSi quantum well as an illustration. We show that the lack of separability between the vertical and in-plane motions gives rise to an additional spin-orbit coupling mechanism (beyond the usual linear and cubic in momentum Rashba terms) that modulates the principal axes of the hole gyromagnetic g-matrix. This non-separability mechanism can be of the same order of magnitude as Rashba-type interactions, and enables spin manipulation when the magnetic field is applied in the plane of the heterostructure even if the dot is symmetric (disk-shaped). More generally, we show that Rabi oscillations in strongly patterned electric fields harness a variety of g-factor modulations. We discuss the implications for the design, modeling and understanding of hole spin qubit devices.

cond-mat.mes-hall

Two-body Wigner molecularization in asymmetric quantum dot spin qubits

Coulomb interactions strongly influence the spectrum and the wave functions of few electrons or holes confined in a quantum dot. In particular, when the confinement potential is not too strong, the Coulomb repulsion triggers the formation of a correlated state, the Wigner molecule, where the particles tend to split apart. We show that the anisotropy of the confinement potential strongly enhances the molecularization process and affects the performances of quantum-dot systems used as spin qubits. Relying on analytical and numerical solutions of the two-particle problem -- both in a simplified single-band approximation and in realistic setups -- we highlight the exponential suppression of the singlet-triplet gap with increasing anisotropy. We compare the molecularization effects in different semiconductor materials and discuss how they specifically hamper Pauli spin blockade readout and reduce the exchange interactions in two-qubit gates.

cond-mat.mes-hall

Variability of electron and hole spin qubits due to interface roughness and charge traps

Semiconductor spin qubits may show significant device-to-device variability in the presence of spin-orbit coupling mechanisms. Interface roughness, charge traps, layout or process inhomogeneities indeed shape the real space wave functions, hence the spin properties. It is, therefore, important to understand how reproducible the qubits can be, in order to assess strategies to cope with variability, and to set constraints on the quality of materials and fabrication. Here we model the variability of single qubit properties (Larmor and Rabi frequencies) due to disorder at the Si/SiO$_2$ interface (roughness, charge traps) in metal-oxide-semiconductor devices. We consider both electron qubits (with synthetic spin-orbit coupling fields created by micro-magnets) and hole qubits (with intrinsic spin-orbit coupling). We show that charge traps are much more limiting than interface roughness, and can scatter Rabi frequencies over one order of magnitude. We discuss the implications for the design of spin qubits and for the choice of materials.

cond-mat.mes-hall