arXiv subjects

Bilin Aksun-Guvenc

Publications and source records attributed to Bilin Aksun-Guvenc.

At least 19 recordsLinked to original sources

arXiv2026

Hybrid A*-Based Reverse Path-Planning of a Vehicle with Trailer System

Reverse parking maneuvering of a vehicle with trailer system is a difficult task to complete for human drivers due to the multi-body nature of the system and the unintuitive controls required to orientate the trailer properly. The problem is complicated with the presence of other vehicles that the trailer and its connected vehicle must avoid during the reverse parking maneuver. While path planning methods in reverse motion for vehicles with trailers exist, there is a lack of results that also offer collision avoidance as part of the algorithm. This paper hence proposes a modified Hybrid A*-based algorithm that can accommodate the vehicle-trailer system as well as collision avoidance considerations with the other vehicles and obstacles in the parking environment. One of the novelties of this proposed approach is its adaptability to the vehicle with trailer system, where limits of usable steering input that prevent the occurrence of jackknife incidents vary with respect to system configuration. The other contribution is the addition of the collision avoidance functionality which the standard Hybrid A* algorithm lacks. The method is developed and presented first, followed by simulation case studies to demonstrate the efficacy of the proposed approach.

cs.RO↗

arXiv2025

High Order Control Lyapunov Function - Control Barrier Function - Quadratic Programming Based Autonomous Driving Controller for Bicyclist Safety

Ensuring the safety of Vulnerable Road Users (VRUs) is a critical challenge in the development of advanced autonomous driving systems in smart cities. Among vulnerable road users, bicyclists present unique characteristics that make their safety both critical and also manageable. Vehicles often travel at significantly higher relative speeds when interacting with bicyclists as compared to their interactions with pedestrians which makes collision avoidance system design for bicyclist safety more challenging. Yet, bicyclist movements are generally more predictable and governed by clear traffic rules as compared to the sudden and sometimes erratic pedestrian motion, offering opportunities for model-based control strategies. To address bicyclist safety in complex traffic environments, this study proposes and develops a High Order Control Lyapunov Function High Order Control Barrier Function Quadratic Programming (HOCLF HOCBF QP) control framework. Through this framework, CLFs constraints guarantee system stability so that the vehicle can track its reference trajectory, whereas CBFs constraints ensure system safety by letting vehicle avoiding potential collisions region with surrounding obstacles. Then by solving a QP problem, an optimal control command that simultaneously satisfies stability and safety requirements can be calculated. Three key bicyclist crash scenarios recorded in the Fatality Analysis Reporting System (FARS) are recreated and used to comprehensively evaluate the proposed autonomous driving bicyclist safety control strategy in a simulation study. Simulation results demonstrate that the HOCLF HOCBF QP controller can help the vehicle perform robust, and collision-free maneuvers, highlighting its potential for improving bicyclist safety in complex traffic environments.

eess.SY↗

arXiv2025

Modified Hybrid A* Collision-Free Path-Planning for Automated Reverse Parking

Parking a vehicle in tight spaces is a challenging task to perform due to the scarcity of feasible paths that are also collision-free. This paper presents a strategy to tackle this kind of maneuver with a modified Hybrid-A* path-planning algorithm that combines the feasibility guarantee inherent in the standard Hybrid A* algorithm with the addition of static obstacle collision avoidance. A kinematic single-track model is derived to describe the low-speed motion of the vehicle, which is subsequently used as the motion model in the Hybrid A* path-planning algorithm to generate feasible motion primitive branches. The model states are also used to reconstruct the vehicle centerline, which, in conjunction with an inflated binary occupancy map, facilitates static obstacle collision avoidance functions. Simulation study and animation are set up to test the efficacy of the approach, and the proposed algorithm proves to consistently provide kinematically feasible trajectories that are also collision-free.

cs.RO↗

arXiv2025

Delay Tolerant Control for Autonomous Driving Using CDOB

With the rapid growth of autonomous vehicle technologies, effective path-tracking control has become a critical component in ensuring safety and efficiency in complex traffic scenarios. When a high level decision making agent generates a collision free path, a robust low level controller is required to precisely follow this trajectory. However, connected autonomous vehicles (CAV) are inherently affected by communication delays and computation delays, which significantly degrade the performance of conventional controllers such as PID or other more advanced controllers like disturbance observers (DOB). While DOB-based designs have shown effectiveness in rejecting disturbances under nominal conditions, their performance deteriorates considerably in the presence of unknown time delays. To address this challenge, this paper proposes a delay-tolerant communication disturbance observer (CDOB) framework for path-tracking control in delayed systems. The proposed CDOB compensates for the adverse effects of time delays, maintaining accurate trajectory tracking even under uncertain and varying delay conditions. It is shown through a simulation study that the proposed control architecture maintains close alignment with the reference trajectory across various scenarios, including single lane change, double-= lane change, and Elastic Band generated collision avoidance paths under various time delays. Simulation results further demonstrate that the proposed method outperforms conventional approaches in both tracking accuracy and delay robustness, making it well suited for autonomous driving applications.

eess.SY↗

arXiv2025

Nonlinear Model Predictive Control-Based Reverse Path-Planning and Path-Tracking Control of a Vehicle with Trailer System

Reverse parking maneuvers of a vehicle with trailer system is a challenging task to complete for human drivers due to the unstable nature of the system and unintuitive controls required to orientate the trailer properly. This paper hence proposes an optimization-based automation routine to handle the path-planning and path-tracking control process of such type of maneuvers. The proposed approach utilizes nonlinear model predictive control (NMPC) to robustly guide the vehicle-trailer system into the desired parking space, and an optional forward repositioning maneuver can be added as an additional stage of the parking process to obtain better system configurations, before backward motion can be attempted again to get a good final pose. The novelty of the proposed approach is the simplicity of its formulation, as the path-planning and path-tracking operations are only conducted on the trailer being viewed as a standalone vehicle, before the control inputs are propagated to the tractor vehicle via inverse kinematic relationships also derived in this paper. Simulation case studies and hardware-in-the-loop tests are performed, and the results demonstrate the efficacy of the proposed approach.

eess.SY↗

arXiv2025

Vehicle-in-Virtual-Environment (VVE) Method for Developing and Evaluating VRU Safety of Connected and Autonomous Driving with Focus on Bicyclist Safety

Extensive research has already been conducted in the autonomous driving field to help vehicles navigate safely and efficiently. At the same time, plenty of current research on vulnerable road user (VRU) safety is performed which largely concentrates on perception, localization, or trajectory prediction of VRUs. However, existing research still exhibits several gaps, including the lack of a unified planning and collision avoidance system for autonomous vehicles, limited investigation into delay tolerant control strategies, and the absence of an efficient and standardized testing methodology. Ensuring VRU safety remains one of the most pressing challenges in autonomous driving, particularly in dynamic and unpredictable environments. In this two year project, we focused on applying the Vehicle in Virtual Environment (VVE) method to develop, evaluate, and demonstrate safety functions for Vulnerable Road Users (VRUs) using automated steering and braking of ADS. In this current second year project report, our primary focus was on enhancing the previous year results while also considering bicyclist safety.

cs.RO↗

arXiv2024

Vehicle-in-Virtual-Environment Method for ADAS and Connected and Automated Driving Function Development/Demonstration/Evaluation

The current approach for new Advanced Driver Assistance System (ADAS) and Connected and Automated Driving (CAD) function development involves a significant amount of public road testing which is inefficient due to the number miles that need to be driven for rare and extreme events to take place, thereby being very costly also, and unsafe as the rest of the road users become involuntary test subjects. A new development, evaluation and demonstration method for safe, efficient, and repeatable development, demonstration and evaluation of ADAS and CAD functions called VehicleInVirtualEnvironment (VVE) was recently introduced as a solution to this problem. The vehicle is operated in a large, empty, and flat area during VVE while its localization and perception sensor data is fed from the virtual environment with other traffic and rare and extreme events being generated as needed. The virtual environment can be easily configured and modified to construct different testing scenarios on demand. This paper focuses on the VVE approach and introduces the coordinate transformations needed to sync pose (location and orientation) in the virtual and physical worlds and handling of localization and perception sensor data using the highly realistic 3D simulation model of a recent autonomous shuttle deployment site in Columbus, Ohio as the virtual world. As a further example that uses multiple actors, the use of VVE for VehicleToVRU communication based Vulnerable Road User (VRU) safety is presented in the paper using VVE experiments and real pedestrian(s) in a safe and repeatable manner. VVE experiments are used to demonstrate the efficacy of the method.

cs.RO↗

arXiv2023

Feasibility of Local Trajectory Planning for Level-2+ Semi-autonomous Driving without Absolute Localization

Autonomous driving has long grappled with the need for precise absolute localization, making full autonomy elusive and raising the capital entry barriers for startups. This study delves into the feasibility of local trajectory planning for level-2+ (L2+) semi-autonomous vehicles without the dependence on accurate absolute localization. Instead, we emphasize the estimation of the pose change between consecutive planning frames from motion sensors and integration of relative locations of traffic objects to the local planning problem under the ego car's local coordinate system, therefore eliminating the need for an absolute localization. Without the availability of absolute localization for correction, the measurement errors of speed and yaw rate greatly affect the estimation accuracy of the relative pose change between frames. We proved that the feasibility/stability of the continuous planning problem under such motion sensor errors can be guaranteed at certain defined conditions. This was achieved by formulating it as a Lyapunov-stability analysis problem. Moreover, a simulation pipeline was developed to further validate the proposed local planning method. Simulations were conducted at two traffic scenes with different error settings for speed and yaw rate measurements. The results substantiate the proposed framework's functionality even under relatively inferior sensor errors. We also experiment the stability limits of the planned results under abnormally larger motion sensor errors. The results provide a good match to the previous theoretical analysis. Our findings suggested that precise absolute localization may not be the sole path to achieving reliable trajectory planning, eliminating the necessity for high-accuracy dual-antenna GPS as well as the high-fidelity maps for SLAM localization.

cs.RO↗

arXiv2023

The Effects of Varying Penetration Rates of L4-L5 Autonomous Vehicles on Fuel Efficiency and Mobility of Traffic Networks

Microscopic traffic simulators that simulate realistic traffic flow are crucial in studying, understanding and evaluating the fuel usage and mobility effects of having a higher number of autonomous vehicles (AVs) in traffic under realistic mixed traffic conditions including both autonomous and non-autonomous vehicles. In this paper, L4-L5 AVs with varying penetration rates in total traffic flow were simulated using the microscopic traffic simulator Vissim on urban, mixed and freeway roadways. The roadways used in these simulations were replicas of real roadways in and around Columbus, Ohio, including an AV shuttle routes in operation. The road-specific information regarding each roadway, such as the number of traffic lights and positions, number of STOP signs and positions, and speed limits, were gathered using OpenStreetMap with SUMO. In simulating L4-L5 AVs, the All-Knowing CoEXist AV and a vehicle with Wiedemann 74 driver were taken to represent AV and non-AV driving, respectively. Then, the driving behaviors, such as headway time and car following, desired acceleration and deceleration profiles of AV, and non-AV car following and lane change models were modified. The effect of having varying penetration rates of L4-L5 AVs were then evaluated using criteria such as average fuel consumption, existence of queues and their average/maximum length, total number of vehicles in the simulation, average delay experience by all vehicles, total number of stops experienced by all vehicles, and total emission of CO, NOx and volatile organic compounds (VOC) from the vehicles in the simulation. The results show that while increasing penetration rates of L4-L5 AVs generally improve overall fuel efficiency and mobility of the traffic network, there were also cases when the opposite trend was observed.

eess.SY↗

arXiv2023

Vehicle-in-Virtual-Environment (VVE)

The current approach to connected and autonomous driving function development and evaluation uses model-in-the-loop simulation, hardware-in-the-loop simulation, and limited proving ground work followed by public road deployment of beta version of software and technology. The rest of the road users are involuntarily forced into taking part in the development and evaluation of these connected and autonomous driving functions in this approach. This is an unsafe, costly and inefficient method. Motivated by these shortcomings, this paper introduces the Vehicle-in-Virtual-Environment (VVE) method of safe, efficient and low cost connected and autonomous driving function development, evaluation and demonstration. The VVE method is compared to the existing state-of-the-art. Its basic implementation for a path following task is used to explain the method where the actual autonomous vehicle operates in a large empty area with its sensor feeds being replaced by realistic sensor feeds corresponding to its location and pose in the virtual environment. It is possible to easily change the development virtual environment and inject rare and difficult events which can be tested very safely. Vehicle-to-Pedestrian (V2P) communication based pedestrian safety is chosen as the application use case for VVE and corresponding experimental results are presented and discussed. It is noted that actual pedestrians and other vulnerable road users can be used very safely in this approach.

cs.RO↗

arXiv2023

Automated Driving Architecture and Operation of a Light Commercial Vehicle

This paper is on the automated driving architecture and operation of a light commercial vehicle. Simple longitudinal and lateral dynamic models of the vehicle and a more detailed CarSim model are developed and used in simulations and controller design and evaluation. Experimental validation is used to make sure that the models used represent the actual response of the vehicle as closely as possible. The vehicle is made drive-by-wire by interfacing with the existing throttle-by-wire, by adding an active vacuum booster for brake-by-wire and by adding a steering actuator for steer-by-wire operation. Vehicle localization is achieved by using a GPS sensor integrated with six axes IMU with a built-in INS algorithm and a digital compass for heading information. Front looking radar, lidar and camera are used for environmental sensing. Communication with the road infrastructure and other vehicles is made possible by a vehicle to vehicle communication modem. A dedicated computer under real time Linux is used to collect, process and distribute sensor information. A dSPACE MicroAutoBox is used for drive-by-wire controls. CACC based longitudinal control and path tracking of a map of GPS waypoints are used to present the operation of this automated driving vehicle.

cs.RO↗

arXiv2023

Information Technology Needs in Vehicle Dynamics Control

Significant changes are occurring in the field of vehicle dynamics control. Consequently, vehicle dynamics control systems are expected to be as common as ABS systems in the near future. This paper focuses on the information technology related requirements posed by these advances in the area of vehicle dynamics control. Topics considered include vehicle dynamics simulation tools, hardware in the loop simulation systems, sensors and related fault tolerance/diagnostics, man machine interface problems and the implications of a networked architecture on controller design.

eess.SY↗

arXiv2023

Decision Making for Autonomous Vehicles

This paper is on decision making of autonomous vehicles for handling roundabouts. The round intersection is introduced first followed by the Markov Decision Processes (MDP), the Partially Observable Markov Decision Processes (POMDP) and the Object Oriented Partially Observable Markov Decision Process (OOPOMDP). The Partially Observable Monte-Carlo Planning algorihtm (POMCP) algorithm is introduced and OOPOMDP is applied to decision making for autonomous vehicles in round intersections. Decision making is formulated as a POMDP problem and the penalty function is formulated and set followed by improvement of decision making with policy prediction. The augmented objective state and policy based state transition is introduced simulations are used to demonstrate the effectiveness of the proposed method.

eess.SY↗

arXiv2023

Vehicle State Estimation and Prediction

This paper presents methods for vehicle state estimation and prediction for autonomous driving. A roundabout is chosen to apply the methods and illustrate the results as autonomous vehicles have difficulty in handling roundabouts. State estimation based on the unscented Kalman filter (UKF) is introduced first with application to a roundabout. The microscopic traffic simulator SUMO is used to generate realistic traffic in the roundabout for the simulation experiments. Change point detection based driving behavior prediction using a multi policy approach is then introduced and evaluated for the round intersection example. Finally, these methods are combined for vehicle trajectory estimation based on UKF and policy prediction and demonstrated using the roundabout example.

eess.SY↗

arXiv2023

The Limited Integrator Model Regulator And its Use in Vehicle Steering Control

Unexpected yaw disturbances like braking on unilaterally icy road, side wind forces and tire rupture are very difficult to handle by the driver of a road vehicle, due to his/her large panic reaction period ranging between 0.5 to 2 seconds. Automatic driver assist systems provide counteracting yaw moments during this driver panic reaction period to maintain the stability of the yaw dynamics of the vehicle. An active steering based driver assist system that uses the model regulator control architecture is introduced and used here for yaw dynamics stabilization in such situations. The model regulator which is a special form of a two degree of freedom control architecture is introduced and explained in detail in a tutorial fashion whereby its integral action capability, among others, is also shown. An auxiliary steering actuation system is assumed and a limited integrator version of the model regulator based steering controller is developed in order not to saturate the auxiliary steering actuator. This low frequency limited integrator implementation also allows the driver to take care of low frequency steering and disturbance rejection tasks. Linear simulation results are used to demonstrate the effectiveness of the proposed method.

eess.SY↗

arXiv2022

Vehicle in Virtual Environment (VVE) Method

Autonomous vehicle (AV) algorithms need to be tested extensively in order to make sure the vehicle and the passengers will be safe while using it after the implementation. Testing these algorithms in real world create another important safety critical point. Real world testing is also subjected to limitations such as logistic limitations to carry or drive the vehicle to a certain location. For this purpose, hardware in the loop (HIL) simulations as well as virtual environments such as CARLA and LG SVL are used widely. This paper discusses a method that combines the real vehicle with the virtual world, called vehicle in virtual environment (VVE). This method projects the vehicle location and heading into a virtual world for desired testing, and transfers back the information from sensors in the virtual world to the vehicle. As a result, while vehicle is moving in the real world, it simultaneously moves in the virtual world and obtains the situational awareness via multiple virtual sensors. This would allow testing in a safe environment with the real vehicle while providing some additional benefits on vehicle dynamics fidelity, logistics limitations and passenger experience testing. The paper also demonstrates an example case study where path following and the virtual sensors are utilized to test a radar based stopping algorithm.

cs.RO↗

arXiv2022

Shared Autonomous Vehicle Mobility for a Transportation Underserved City

This paper proposes the use of an on-demand, ride hailed and ride-Shared Autonomous Vehicle (SAV) service as a feasible solution to serve the mobility needs of a small city where fixed route, circulator type public transportation may be too expensive to operate. The presented work builds upon our earlier work that modeled the city of Marysville, Ohio as an example of such a city, with realistic traffic behavior, and trip requests. A simple SAV dispatcher is implemented to model the behavior of the proposed on-demand mobility service. The goal of the service is to optimally distribute SAVs along the network to allocate passengers and shared rides. The pickup and drop-off locations are strategically placed along the network to provide mobility from affordable housing, which are also transit deserts, to locations corresponding to jobs and other opportunities. The study is carried out by varying the behaviors of the SAV driving system from cautious to aggressive along with the size of the SAV fleet and analyzing their corresponding performance. It is found that the size of the network and behavior of AV driving system behavior results in an optimal number of SAVs after which increasing the number of SAVs does not improve overall mobility. For the Marysville network, which is a 9 mile by 8 mile network, this happens at the mark of a fleet of 8 deployed SAVs. The results show that the introduction of the proposed SAV service with a simple optimal shared scheme can provide access to services and jobs to hundreds of people in a small sized city.

cs.RO↗

arXiv2022

State of the Art of Adaptive Cruise Control and Stop and Go Systems

This paper presents the state of the art of Adaptive Cruise Control (ACC) and Stop and Go systems as well as Intelligent Transportation Systems enhanced with inter vehicle communication. The sensors used in these systems and the level of their current technology are introduced. Simulators related to ACC and Stop and Go (S&G) systems are also surveyed and the MEKAR simulator is presented. Finally, future trends of ACC and Stop and Go systems and their advantages are emphasized.

cs.RO↗