arXiv subjects

Bill Corcoran

Publications and source records attributed to Bill Corcoran.

At least 19 recordsLinked to original sources

arXiv2026

Reconfigurable microwave photonic Fano filters based on optical Kerr microcombs

Microwave photonic (MWP) Fano filters, featuring asymmetric filter shapes that enable steep spectral transitions, are attractive for high bandwidth microwave signal processing such as frequency discrimination. However, achieving both steep spectral transitions and a high degree of reconfigurability remains challenging for conventional methods relying on direct mapping of Fano resonances generated by optical filters. Here, we propose and experimentally demonstrate a new way for realizing MWP Fano filters based on a microcomb-driven transversal filter system. Leveraging the large number of comb lines provided by microcombs as discrete taps, the transversal filter system can synthesize filter response that closely resembles Fano resonances, yielding high rolloff rates and slope rates up to 33.8 dB / GHz and 25.7 dB / GHz in our experiments, respectively. In addition, by simply programming the tap coefficients without changing any hardware, highly reconfigurable filter response can be realized. We experimentally demonstrate independent tuning of all three Fano characteristic parameters, including the asymmetry factor, resonance linewidth, and center frequency. These results verify the effectiveness of our approach for implementing highly reconfigurable MWP Fano filters with steep spectral transitions, offering strong versatility for meeting diverse requirements in practical applications.

physics.optics↗

arXiv2026

Soliton crystal formation in Kerr cavities with an avoided mode crossing: a theoretical study

We theoretically and numerically investigate the formation of soliton crystals in Kerr microresonators in the presence of an avoided mode crossing (AMX). Our study combines dynamical simulations based on a modified Lugiato-Lefever equation (LLE) with a stability analysis of its stationary solutions. We show that, depending on its strength and spectral position, the AMX can either stabilize otherwise unstable soliton crystals or induce Turing patterns which subsequently seeds soliton crystal formation. Both perfect and imperfect soliton crystals can form below the pump threshold for spatiotemporal chaos, and we identify the conditions required for perfect crystals. Finally, we investigate modulation instability in the presence of an AMX, showing that it modifies the parametric gain and can suppress or promote Turing pattern formation depending on its spectral position.

physics.optics↗

arXiv2025

Optical Kerr soliton microcombs for high bandwidth communications

Microcombs, optical frequency combs generated by nonlinear integrated micro-cavity resonators, have the potential to offer the full capability of their benchtop comb based counterparts, but in an integrated footprint. They have enabled breakthroughs in spectroscopy, microwave photonics, frequency synthesis, optical ranging, quantum state generation and manipulation, metrology, optical neuromorphic processing and more. One of their most promising applications has been optical fibre communications where they have formed the basis for massively parallel ultrahigh capacity multiplexed data transmission. Innovative approaches have been used in recent years to phaselock, or modelock different types of microcombs, from dissipative Kerr solitons to dark solitons, soliton crystals and others. This has enabled their use as sources for optical communications including advanced coherent modulation format systems that have achieved ultrahigh data capacity bit rates breaking the petabit/s barrier. Here, we review this new and exciting field, chronicling the progress while highlighting the challenges and opportunities.

physics.optics↗

arXiv2025

On-chip GaAs carrier lifetime investigation

We propose an alternative way to determine GaAs carrier lifetime using pump-probe measurement based on fibre optics and integrated waveguides. We find that our GaAs samples have the lifetime ranging from 30-80 ps, supporting the bandwidth $\geq$ 12.5 GHz. The platform utilised in this work could offer a cost-effective way to investigate photocarrier lifetime. Moreover, it may have the potential for high-speed switches and detectors, or could be exploited for possible all-optical modulation.

physics.optics↗

arXiv2024

Turnkey deterministic soliton crystal generation

The deterministic generation of robust soliton comb has significant meaning for the optical frequency combs to be widely used in various applications. As a novel form of microcomb, Soliton crystal holds the advantages of easy generation, high conversion efficiency, and excellent thermal robustness. Here, we report the turnkey deterministic generation of "Palm-like" soliton crystal with a free-running scheme. The robustness of the turnkey soliton crystal generation is also investigated in multiple aspects, including the success rate, the thermal robustness, and the long-term stability. The experiment results reveal our turnkey soliton crystal can achieve nearly a 100% success rate with a power variation less than 1.5 dB over one hundred trials of two samples, is insensitive to thermal effect, and is robust to the environment during four-hour laboratory time.

physics.optics↗

arXiv2024

Photonic real time video image signal processor at 17Tb/s based on a Kerr microcomb

Signal processing has become central to many fields, from coherent optical telecommunications, where it is used to compensate signal impairments, to video image processing. Image processing is particularly important for observational astronomy, medical diagnosis, autonomous driving, big data and artificial intelligence. For these applications, signal processing traditionally has mainly been performed electronically. However these, as well as new applications, particularly those involving real time video image processing, are creating unprecedented demand for ultrahigh performance, including high bandwidth and reduced energy consumption. Here, we demonstrate a photonic signal processor operating at 17 Terabits/s and use it to process video image signals in real-time. The system processes 400,000 video signals concurrently, performing 34 functions simultaneously that are key to object edge detection, edge enhancement and motion blur. As compared with spatial-light devices used for image processing, our system is not only ultra-high speed but highly reconfigurable and programable, able to perform many different functions without any change to the physical hardware. Our approach is based on an integrated Kerr soliton crystal microcomb, and opens up new avenues for ultrafast robotic vision and machine learning.

physics.optics↗

arXiv2021

Frequency comb distillation for optical superchannel transmission

Optical frequency combs can potentially provide an efficient light source for multi-terabit-per-second optical superchannels. However, as the bandwidth of these multi-wavelength light sources is increased, it can result in low per-line power. Optical amplifiers can be used to overcome power limitations, but the accompanying spontaneous optical noise can degrade performance in optical systems. To overcome this, we demonstrate wideband noise reduction for comb lines using a high-Q microring resonator whose resonances align with the comb lines, providing tight optical filtering of multiple combs lines at the same time. By distilling an optical frequency comb in this way, we are able to reduce the required comb line OSNR when these lines are used in a coherent optical communications system. Through performance tests on a 19.45-GHz-spaced comb generating 71 lines, using 18 Gbaud, 64-QAM sub-channels at a spectral efficiency of 10.6 b/s/Hz, we find that noise-corrupted comb lines can reduce the optical signal-to-noise ratio required for the comb by ~ 9 dB when used as optical carriers at the transmitter side, and by ~ 12 dB when used as a local oscillator at the receiver side. This demonstration provides a method to enable low power optical frequency combs to be able to support high bandwidth and high-capacity communications.

physics.app-ph↗

arXiv2020

11 TeraFLOPs per second photonic convolutional accelerator for deep learning optical neural networks

Convolutional neural networks (CNNs), inspired by biological visual cortex systems, are a powerful category of artificial neural networks that can extract the hierarchical features of raw data to greatly reduce the network parametric complexity and enhance the predicting accuracy. They are of significant interest for machine learning tasks such as computer vision, speech recognition, playing board games and medical diagnosis. Optical neural networks offer the promise of dramatically accelerating computing speed to overcome the inherent bandwidth bottleneck of electronics. Here, we demonstrate a universal optical vector convolutional accelerator operating beyond 10 TeraFLOPS (floating point operations per second), generating convolutions of images of 250,000 pixels with 8 bit resolution for 10 kernels simultaneously, enough for facial image recognition. We then use the same hardware to sequentially form a deep optical CNN with ten output neurons, achieving successful recognition of full 10 digits with 900 pixel handwritten digit images with 88% accuracy. Our results are based on simultaneously interleaving temporal, wavelength and spatial dimensions enabled by an integrated microcomb source. This approach is scalable and trainable to much more complex networks for demanding applications such as unmanned vehicle and real-time video recognition.

cs.NE↗

arXiv2020

Arbitrary waveform generator for microwave and radio frequencies based on photonics with an integrated 49GHz Kerr micro-comb

We report a photonic-based radio frequency (RF) arbitrary waveform generator (AWG) using a soliton crystal micro-comb source with a free spectral range (FSR) of 48.9 GHz. The comb source provides over 80 wavelengths, or channels, that we use to successfully achieve arbitrary waveform shapes including square waveforms with a tunable duty ratio ranging from 10% to 90%, sawtooth waveforms with a tunable slope ratio of 0.2 to 1, and a symmetric concave quadratic chirp waveform with an instantaneous frequency of sub GHz. We achieve good agreement between theory and experiment, validating the effectiveness of this approach towards realizing high-performance, broad bandwidth, nearly user-defined RF waveform generation.

physics.app-ph↗

arXiv2020

Photonic radio frequency and microwave integration based on a multi-wavelength 49GHz Kerr microcomb source

We demonstrate a photonic RF integrator based on an integrated soliton crystal microcomb source. By multicasting and progressively delaying the input RF signal using a transversal structure, the input RF signal is integrated discretely. Up to 81 wavelengths are provided by the microcomb source, which enable a large integration time window of 6.8 ns, together with a time resolution as fast as 84 ps. We perform signal integration of a diverse range of input RF signals including Gaussian pulses with varying time widths, dual pulses with varying time intervals and a square waveform. The experimental results show good agreement with theory. These results verify our microcomb-based integrator as a competitive approach for RF signal integration with high performance and potentially lower cost and footprint.

physics.app-ph↗

arXiv2020

Single photonic perceptron based on a soliton crystal Kerr microcomb for high-speed, scalable, optical neural networks

Optical artificial neural networks (ONNs), analog computing hardware tailored for machine learning, have significant potential for ultra-high computing speed and energy efficiency. We propose a new approach to architectures for ONNs based on integrated Kerr micro-comb sources that is programmable, highly scalable and capable of reaching ultra-high speeds. We experimentally demonstrate the building block of the ONN, a single neuron perceptron, by mapping synapses onto 49 wavelengths of a micro-comb to achieve a high single-unit throughput of 11.9 Giga-FLOPS at 8 bits per FLOP, corresponding to 95.2 Gbps. We test the perceptron on simple standard benchmark datasets, handwritten-digit recognition and cancer-cell detection, achieving over 90% and 85% accuracy, respectively. This performance is a direct result of the record small wavelength spacing (49GHz) for a coherent integrated microcomb source, which results in an unprecedented number of wavelengths for neuromorphic optics. Finally, we propose an approach to scaling the perceptron to a deep learning network using the same single micro-comb device and standard off-the-shelf telecommunications technology, for high-throughput operation involving full matrix multiplication for applications such as real-time massive data processing for unmanned vehicle and aircraft tracking.

physics.optics↗

arXiv2020

Optical data transmission at 44Tb/s and 10 bits/s/Hz over the C-band with standard fibre and a single micro-comb source

Micro-combs [1 - 4], optical frequency combs generated by integrated micro-cavity resonators, offer the full potential of their bulk counterparts [5,6], but in an integrated footprint. The discovery of temporal soliton states (DKS dissipative Kerr solitons) [4,7-11] as a means of modelocking microcombs has enabled breakthroughs in many fields including spectroscopy [12,13], microwave photonics [14], frequency synthesis [15], optical ranging [16,17], quantum sources [18,19], metrology [20,21] and more. One of their most promising applications has been optical fibre communications where they have enabled massively parallel ultrahigh capacity multiplexed data transmission [22,23]. Here, by using a new and powerful class of microcomb called soliton crystals [11], we achieve unprecedented data transmission over standard optical fibre using a single integrated chip source. We demonstrate a line rate of 44.2 Terabits per second using the telecommunications C band at 1550nm with a spectral efficiency, a critically important performance metric, of 10.4 bits/s/Hz. Soliton crystals exhibit robust and stable generation and operation as well as a high intrinsic efficiency that, together with a low soliton microcomb spacing of 48.9 GHz enable the use of a very high coherent data modulation format of 64 QAM (quadrature amplitude modulated). We demonstrate error free transmission over 75 km of standard optical fibre in the laboratory as well as in a field trial over an installed metropolitan optical fibre network. These experiments were greatly aided by the ability of the soliton crystals to operate without stabilization or feedback control. This work demonstrates the capability of optical soliton crystal microcombs to perform in demanding and practical optical communications networks.

physics.app-ph↗

arXiv2020

Optical Kerr soliton crystal microcomb source for RF photonic fractional differentiation

We report a photonic radio frequency (RF) fractional differentiator based on an integrated Kerr micro-comb source. The micro-comb source has a free spectral range (FSR) of 49 GHz, generating a large number of comb lines that serve as a high-performance multi-wavelength source for the differentiator. By programming and shaping the comb lines according to calculated tap weights, arbitrary fractional orders ranging from 0.15 to 0.90 are achieved over a broad RF operation bandwidth of 15.49 GHz. We experimentally characterize the frequency-domain RF amplitude and phase responses as well as the temporal responses with a Gaussian pulse input. The experimental results show good agreement with theory, confirming the effectiveness of our approach towards high-performance fractional differentiators featuring broad processing bandwidth, high reconfigurability, and potentially greatly reduced size and cost.

physics.app-ph↗

arXiv2019

Phase-encoded RF signal generation based on an integrated 49GHz micro-comb optical source

We demonstrate photonic RF phase encoding based on an integrated micro-comb source. By assembling single-cycle Gaussian pulse replicas using a transversal filtering structure, phase encoded waveforms can be generated by programming the weights of the wavelength channels. This approach eliminates the need for RF signal generators for RF carrier generation or arbitrary waveform generators for phase encoded signal generation. A large number of wavelengths of up to 60 were provided by the microcomb source, yielding a high pulse compression ratio of 30. Reconfigurable phase encoding rates ranging from 2 to 6 Gb/s were achieved by adjusting the length of each phase code. This work demonstrates the significant potentials of this microcomb-based approach to achieve high-speed RF photonic phase encoding with low cost and footprint.

physics.app-ph↗

arXiv2019

Microwave photonic fractional Hilbert transformer with an integrated optical soliton crystal micro-comb

We report a photonic microwave and RF fractional Hilbert transformer based on an integrated Kerr micro-comb source. The micro-comb source has a free spectral range (FSR) of 50GHz, generating a large number of comb lines that serve as a high-performance multi-wavelength source for the transformer. By programming and shaping the comb lines according to calculated tap weights, we achieve both arbitrary fractional orders and a broad operation bandwidth. We experimentally characterize the RF amplitude and phase response for different fractional orders and perform system demonstrations of real-time fractional Hilbert transforms. We achieve a phase ripple of < 0.15 rad within the 3-dB pass-band, with bandwidths ranging from 5 to 9 octaves, depending on the order. The experimental results show good agreement with theory, confirming the effectiveness of our approach as a new way to implement high-performance fractional Hilbert transformers with broad processing bandwidth, high reconfigurability, and greatly reduced size and complexity.

physics.app-ph↗

arXiv2017

Chip-based Brillouin processing for carrier recovery in coherent optical communications

Modern fiber-optic coherent communications employ advanced spectrally-efficient modulation formats that require sophisticated narrow linewidth local oscillators (LOs) and complex digital signal processing (DSP). Here, we establish a novel approach to carrier recovery harnessing large-gain stimulated Brillouin scattering (SBS) on a photonic chip for up to 116.82 Gbit/sec self-coherent optical signals, eliminating the need for a separate LO. In contrast to SBS processing on-fiber, our solution provides phase and polarization stability while the narrow SBS linewidth allows for a record-breaking small guardband of ~265 MHz, resulting in higher spectral-efficiency than benchmark self-coherent schemes. This approach reveals comparable performance to state-of-the-art coherent optical receivers without requiring advanced DSP. Our demonstration develops a low-noise and frequency-preserving filter that synchronously regenerates a low-power narrowband optical tone that could relax the requirements on very-high-order modulation signaling and be useful in long-baseline interferometry for precision optical timing or reconstructing a reference tone for quantum-state measurements.

physics.app-ph↗

arXiv2017

Cyclic spectra for wavelength-routed optical networks

We propose occupying guard-bands in closely-spaced WDM systems with redundant signal spectral components, to increase tolerance to frequency misalignment and channel shaping from multiplexing elements. By cyclically repeating the spectrum of a modulated signal, we show improved tolerance to impairments due to add/drop multiplexing with a commercial wavelength selective switch, in systems using 5-20% guard bands on a 50-GHz DWDM grid.

cs.NI↗

arXiv2016

Experimental demonstration of Layered/Enhanced ACO-OFDM in short haul optical fiber transmission link

Asymmetrically clipped optical orthogonal frequency division multiplexing (ACO-OFDM) is theoretically more power efficient but less spectrally efficient than DC-bias OFDM (DCO-OFDM), with less power allocating to the informationless bias component by only using odd index sub-carriers. Layered/Enhanced asymmetrically clipped optical orthogonal frequency division multiplexing (L/E-ACO-OFDM) has been proposed to increase the spectral efficiency of ACO-OFDM. In this letter, we experimentally demonstrate a 30-km single mode fiber transmission using L/E-ACO-OFDM at 4.375 Gbits/s. Using a Volterra filter based equalizer, 2-dB and 1.5-dB Q-factor improvements for L/E-ACO-OFDM comparing with DCO-OFDM can be obtained in back-to-back and 30-km fiber transmission respectively.

cs.IT↗