arXiv subjects

Bilu Liu

Publications and source records attributed to Bilu Liu.

At least 19 recordsLinked to original sources

arXiv2025

The 2D Materials Roadmap

Over the past two decades, 2D materials have rapidly evolved into a diverse and expanding family of material platforms. Many members of this materials class have demonstrated their potential to deliver transformative impact on fundamental research and technological applications across different fields. In this roadmap, we provide an overview of the key aspects of 2D material research and development, spanning synthesis, properties and commercial applications. We specifically present roadmaps for high impact 2D materials, including graphene and its derivatives, transition metal dichalcogenides, MXenes as well as their heterostructures and moir\'e systems. The discussions are organized into thematic sections covering emerging research areas (e.g., twisted electronics, moir\'e nano-optoelectronics, polaritronics, quantum photonics, and neuromorphic computing), breakthrough applications in key technologies (e.g., 2D transistors, energy storage, electrocatalysis, filtration and separation, thermal management, flexible electronics, sensing, electromagnetic interference shielding, and composites) and other important topics (computational discovery of novel materials, commercialization and standardization). This roadmap focuses on the current research landscape, future challenges and scientific and technological advances required to address, with the intent to provide useful references for promoting the development of 2D materials.

cond-mat.mtrl-sci↗

arXiv2025

Exclusive Generation of Single-Atom Sulfur for Ultrahigh Quality Monolayer MoS$_2$ Growth

Preparation of high-quality two-dimensional (2D) transition metal dichalcogenides (TMDCs) is the precondition for realizing their applications. However, the synthesized 2D TMDCs (e.g., MoS$_2$) crystals suffer from low quality due to the massive defects formed during the growth. Here, we report the single-atom sulfur (S1) as a highly reactive sulfur species to grow ultrahigh-quality monolayer MoS$_2$. Derived from battery waste, the sulfurized polyacrylonitrile (SPAN) is found to be exclusive and efficient in releasing S1. The monolayer MoS$_2$ prepared by SPAN exhibits an ultralow defect density of $~7\times 10^{12}$ cm$^{-2}$ and the narrowest photoluminescence (PL) emission peak with full-width at half-maximum of ~47.11 meV at room temperature. Moreover, the statistical resonance Raman and low-temperature PL results further verify the significantly lower defect density and higher optical quality of SPAN-grown MoS$_2$ than the conventional S-powder-grown samples. This work provides an effective approach for preparing ultrahigh-quality 2D single crystals, facilitating their industrial applications.

cond-mat.mtrl-sci↗

arXiv2025

Cu Intercalation-stabilized 1T'-MoS2 with Electrical Insulating Behavior

The intercalated two-dimensional (2D) transition metal dichalcogenides (TMDCs) have attracted much attention for their designable structure and novel properties. Among this family, host materials with low symmetry such as 1T' phase TMDCs are particularly interesting because of their potentials in inducing unconventional phenomena. However, such systems typically have low quality and poor stability, hindering further study in the structure-property relationship and applications. In this work, we intercalated Cu into 1T' MoS2 with high crystallinity and high thermal stability up to ~300 oC. We identified the distribution and arrangement of Cu intercalators for the first time, and the results show that Cu occupy partial of the tetrahedral interstices aligned with Mo sites. The obtained Cu-1T' MoS2 exhibits an insulating hopping transport behavior with a large temperature coefficient of resistance reaching -4 ~ -2 % K-1. This work broadens the artificial intercalated structure library and promotes structure design and property modulation of layered materials.

cond-mat.mtrl-sci↗

arXiv2025

An Inorganic Liquid Crystalline Dispersion with 2D Ferroelectric Moieties

Electro-optical effect based liquid crystal devices have been extensively used in optical modulation techniques, in which the Kerr coefficient reflects the sensitivity of the liquid crystals and determines the strength of the device operational electric field. The Peterlin-Stuart theory and the O'Konski model jointly indicate that a giant Kerr coefficient could be obtained in a material with both a large geometrical anisotropy and an intrinsic polarization, but such a material is not yet reported. Here we reveal a ferroelectric effect in a monolayer two-dimensional mineral vermiculite. A large geometrical anisotropy factor and a large inherent electric dipole together raise the record value of Kerr coefficient by an order of magnitude, till $3.0\times 10^{-4}$ m V$^{-2}$. This finding enables an ultra-low operational electric field of $10^2$-$10^4$ V m$^{-1}$ and the fabrication of electro-optical devices with an inch-level electrode separation, which is not practical previously. Because of its high ultraviolet stability (decay <1% under ultraviolet exposure of 1000 hours), large-scale, and energy-efficiency, prototypical displayable billboards have been fabricated for outdoor interactive scenes. The work provides new insights for both liquid crystal optics and two-dimensional ferroelectrics.

cond-mat.mtrl-sci↗

arXiv2022

Layer-dependent Raman spectroscopy and electronic applications of wide-bandgap 2D semiconductor \b{eta}-ZrNCl

In recent years, two-dimensional (2D) layered semiconductors have received much attention for their potential in next-generation electronics and optoelectronics. Wide-bandgap 2D semiconductors are especially important in blue and ultraviolet wavelength region, while there are very few 2D materials in this region. Here, monolayer \b{eta}-type zirconium nitride chloride (\b{eta}-ZrNCl) is isolated for the first time, which is an air-stable layered material with a bandgap of ~3.0 eV in bulk. Systematical investigation of layer-dependent Raman scattering of ZrNCl from monolayer, bilayer, to bulk reveals a blue shift of its out-of-plane A1g peak at ~189 cm-1. Importantly, this A1g peak is absent in monolayer, suggesting that it is a fingerprint to quickly identify monolayer and for the thickness determination of 2D ZrNCl. The back-gate field-effect transistor based on few-layer ZrNCl shows a high on/off ratio of 108. These results suggest the potential of 2D \b{eta}-ZrNCl for electronic applications.

cond-mat.mtrl-sci↗

arXiv2022

Recent Advances in Design of Electrocatalysts for High-Current-Density Water Splitting

Electrochemical water splitting technology for producing "green hydrogen" is important for the global mission of carbon neutrality. Electrocatalysts with decent performance at high current densities play a central role in the industrial implementation of this technology. The field has advanced immensely in recent years, as witnessed by many types of catalysts have been designed and synthesized which work at industrially-relevant current densities (> 200 mA cm-2). Note that the activity and stability of catalysts can be influenced by their local reaction environment, which are closely related to the current density. By discussing recent advances in this field, we summarize several key aspects that affect the catalytic performance for high-current-density electrocatalysis, including dimensionality of catalysts, surface chemistry, electron transport path, morphology, and catalyst-electrolyte interplay. We highlight the multiscale design strategy that considers these aspects comprehensively for developing high-current-density catalysts. We also put forward out perspectives on the future directions in this emerging field.

physics.chem-ph↗

arXiv2022

Two-dimensional Functional Minerals for Sustainable Optics

Optical device is a key component in our lives and organic liquid crystals are nowadays widely used to reduce human imprint. However, this technology still suffers from relatively high costs, toxicity and other environmental impacts, and cannot fully meet the demand of future sustainable society. Here we describe an alternative approach to colour-tuneable optical devices, which is based on sustainable inorganic liquid crystals derived from two-dimensional mineral materials abundant in nature. The prototypical two-dimensional mineral of vermiculite is massively produced by a green method, possessing size-to-thickness ratios of >103, in-plane magnetisation of >10 emu g-1, and an optical bandgap of >3 eV. These characteristics endow two-dimensional vermiculite with sensitive magneto-birefringence response, which is several orders of magnitude larger than organic counterparts, as well as capability of broad-spectrum modulation. Our finding consequently permits the fabrication of various chromic devices with low or even zero-energy consumption, which can be used for sustainable optics.

physics.optics↗

arXiv2022

A Ta-TaS2 monolithic catalyst with robust and metallic interface for superior hydrogen evolution

The use of highly active and robust catalysts is crucial for producing green hydrogen by water electrolysis as we strive to achieve global carbon neutrality. Noble metals like platinum are currently used in industry for the hydrogen evolution reaction (HER), but suffer from scarcity, high price and unsatisfied performance and stability at large current density, restricting their large scale implementations. Here we report the synthesis of a new type of monolithic catalyst (MC) consisting of a metal disulfide (e.g., TaS2) catalyst vertically bonded to a conductive substrate of the same metal by strong covalent bonds. These features give the MC a mechanically robust and electrically near zero resistance interface, leading to an outstanding HER performance including rapid charge transfer and excellent durability, together with a low overpotential of 398 mV to achieve a current density of 2,000 mA cm-2 as required by industry. The Ta TaS2 MC has a negligible performance decay after 200 h operation at large current densities. In light of its unique interface and the various choice of metal elements giving the same structure, such monolithic materials may have broad uses besides catalysis.

cond-mat.mtrl-sci↗

arXiv2021

Out-of-Plane Resistance Switching of 2D Bi2O2Se at Nanoscale

2D bismuth oxyselenide (Bi2O2Se) with high electron mobility shows great potential for nanoelectronics. Although in-plane properties of Bi2O2Se have been widely studied, its out-ofplane electrical transport behavior remains elusive, despite its importance in fabricating devices with new functionality and high integration density. Here, we study the out-of-plane electrical properties of 2D Bi2O2Se at nanoscale by conductive atomic force microscope. We find that hillocks with tunable heights and sizes are formed on Bi2O2Se after applying vertical electrical field. Intriguingly, such hillocks are conductive in vertical direction, resulting in a previously unknown out-of-plane resistance switching in thick Bi2O2Se flakes while ohmic conductive characteristic in thin ones. Furthermore, we observe the transformation from bipolar to stable unipolar conduction in thick Bi2O2Se flake possessing such hillocks, suggesting its potential to function as a selector in vertical devices. Our work reveals unique out-of-plane transport behavior of 2D Bi2O2Se, providing the basis for fabricating vertical devices based on this emerging 2D material.

physics.app-ph↗

arXiv2021

Realization of A Non-Markov Chain in A Single 2D Crystal RRAM

The non-Markov processes widely exist in thermodymanic processes, while it usually requires packing of many transistors and memories with great system complexity in traditional device architecture to minic such functions. Two-dimensional (2D) material-based resistive random access memory (RRAM) devices show potential for next-generation computing systems with much-reduced complexity. Here, we achieve the non-Markov chain in an individual RRAM device based on 2D mica with a vertical metal/mica/metal structure. We find that the internal potassium ions (K+) in 2D mica gradually move along the direction of the applied electric field, making the initially insulating mica conductive. The accumulation of K+ is tuned by electrical field, and the 2D-mica RRAM possesses both unipolar and bipolar memory windows, high on/off ratio, decent stability and repeatability.Importantly, the non-Markov chain algorithm is established for the first time in a single RRAM, in which the movement of K+ is dependent on the stimulated voltage as well as their past states. This work not only uncovers the inner ionic conductivity of 2D mica, but also opens the door for such novel RRAM devices with numerous functions and applications.

physics.app-ph↗

arXiv2021

Collective Behavior Induced Highly Sensitive Magneto-Optic Effect in 2D Inorganic Liquid Crystals

Collective behavior widely exists in nature, ranging from the macroscopic cloud of swallows to the microscopic cloud of colloidal particles. The behavior of an individual inside the collective is distinctive from its behavior alone, as it follows its neighbors. The introduction of such collective behavior in two-dimensional (2D) materials may offer new possibilities to achieve desired but unattained properties. Here, we report a highly sensitive magneto-optic effect and transmissive magneto-coloration via introducing collective behavior into magnetic 2D material dispersions. The increase of ionic strength in the dispersion enhances the collective behavior of colloidal particles, giving rise to a magneto-optic Cotton-Mouton coefficient up to 2700 T-2m-1 which is the highest value obtained so far, being three orders of magnitude larger than other known transparent media. We also reveal linearly dependence of magneto-coloration on the concentration and hydration radius of ions. Such linear dependence and the extremely large Cotton-Mouton coefficient cooperatively allow fabrication of giant magneto-birefringent devices for color-centered visual sensing.

cond-mat.soft↗

arXiv2021

Glue-Assisted Grinding Exfoliation of Large-Size 2D Materials for Insulating Thermal Conduction and Large-Current-Density Hydrogen Evolution

Two-dimensional (2D) materials have many promising applications, but their scalable production remains challenging. Herein, we develop a glue-assisted grinding exfoliation (GAGE) method in which the adhesive polymer acts as a glue to massively produce 2D materials with large lateral sizes, high quality, and high yield. Density functional theory simulation shows that the exfoliation mechanism involves the competition between the binding energy of selected polymers and the 2D materials which is larger than the exfoliation energy of the layered materials. Taking h-BN as an example, the GAGE produces 2D h-BN with an average lateral size of 2.18 μm and thickness of 3.91 nm. The method is also extended to produce various other 2D materials, including graphene, MoS2, Bi2O2Se, vermiculite, and montmorillonite. Two representative applications of thus-produced 2D materials have been demonstrated, including h-BN/polymer composites for insulating thermal conduction and MoS2 electrocatalysts for large-current-density hydrogen evolution, indicating the great potential of massively produced 2D materials.

physics.app-ph↗

arXiv2021

A durable and efficient electrocatalyst for saline water splitting with current density exceeding 2000 mA cm -2

Water electrolysis is promising for industrial hydrogen production to achieve a sustainable and green hydrogen economy, but the high cost of the technology limits its market share. Developing efficient yet economic electrocatalysts is crucial to decrease the cost of electricity and electrolytic cell. Meanwhile, electrolysis in seawater electrolyte can further reduce feedstock cost. Here we synthesize a type of electrocatalyst where trace precious metals are strongly anchored on corrosion-resistive matrix. As an example, the produced Pt/Ni-Mo electrocatalyst only needs an overpotential of 113 mV to reach an ultrahigh current density of 2000 mA cm-2 in saline-alkaline electrolyte, standing as the best performance so far. It shows high activity and long durability in various electrolytes and under harsh conditions, including strong alkaline and simulated seawater electrolytes, and under elevated temperatures up to 80 degree Celsius). This electrocatalyst is produced on a large scale at low cost and shows good performance in a commercial membrane electrode assembly stack, demonstrating its feasibility for practical water electrolysis

physics.chem-ph↗

arXiv2021

Stabilized Hydroxide Mediated Nickel-Based Electrocatalysts for High Current Density Hydrogen Evolution in Alkaline Media

Large scale production of hydrogen by electrochemical water splitting is considered as a promising technology to address critical energy challenges caused by the extensive use of fossil fuels. Although nonprecious nickel-based catalysts work well at low current densities, they need large overpotentials at high current densities that hinders their potential applications in practical industry. Here we report a hydroxide-mediated nickel based electrocatalyst for high current density hydrogen evolution, which delivers a current density of 1000 mA cm-2 at an overpotential of 98 mV. Combined X-ray absorption spectroscopy and high resolution X-ray photoelectron spectroscopy results show charge redistribution of nickel sites caused by Mo and surface FeOx clusters, which can stabilize the surface nickel hydroxide at high current densities for promoting water dissociation step. Such catalyst is synthesized at the metre scale and shows a current density of 500 mA cm-2 at 1.56 V in the overall water splitting, which demonstrate its potential for practical use. This work highlights a charge-engineering strategy for rational design of catalysts that work well at high current densities.

physics.chem-ph↗

arXiv2021

Catalyst-Free Growth of Atomically-thin Bi2O2Se Nanoribbons for High-performance Electronics and Optoelectronics

One-dimensional (1D) materials have attracted significant research interest due to their unique quantum confinement effects and edge-related properties. Atomically thin 1D nanoribbon is particularly interesting because it is a valuable platform with physical limits of both thickness and width. Here, we develop a catalyst-free growth method and achieves the growth of Bi2O2Se nanostructures with tunable dimensionality. Significantly, Bi2O2Se nanoribbons with thickness down to 0.65 nm, corresponding to monolayer, are successfully grown for the first time. Electrical and optoelectronic measurements show that Bi2O2Se nanoribbons possess decent performance in terms of mobility, on/off ratio, and photoresponsivity, suggesting their promising for devices. This work not only reports a new method for the growth of atomically thin nanoribbons but also provides a platform to study properties and applications of such nanoribbon materials at thickness limit.

cond-mat.mtrl-sci↗

arXiv2021

Doping Concentration Modulation in Vanadium Doped Monolayer Molybdenum Disulfide for Synaptic Transistors

Doping is an effective way to modify the electronic property of two-dimensional (2D) materials and endow them with new functionalities. However, wide-range control of the substitutional doping concentration with large scale uniformity remains challenging in 2D materials. Here we report in-situ chemical vapor deposition growth of vanadium (V) doped monolayer molybdenum disulfide (MoS2) with widely tunable doping concentrations ranging from 0.3 to 13.1 at%. The key to regulate the doping concentration lies in the use of appropriate V precursors with different doping abilities, which also generate a large-scale uniform doping effect. Artificial synaptic transistors were fabricated by using the heavily doped MoS2 as the channel material for the first time. Synaptic potentiation, depression and repetitive learning processes are mimicked by the gate-tunable channel conductance change in such transistors with abundant V atoms to trap/detrap electrons. This work shows a feasible method to dope monolayer 2D semiconductors and demonstrates their use in artificial synaptic transistors.

cond-mat.mtrl-sci↗

arXiv2021

Spatial Structure Engineering in Enhancing Performance of Mosaic Electrocatalysts

Understanding the mechanism and developing strategies toward efficient electrocatalysis at gas-liquidsolid interfaces are important yet challenging. In the past decades, researchers have devoted many efforts to improving catalyst activity by modulating electronic properties of catalysts in terms of chemical components and physical features. Here we develop a mosaic catalyst strategy to improve activity of electrocatalysts by engineering their spatial structures. Taking Pt catalyst as an example, the mosaic Pt leads to high catalytic performance, showing a specific activity 11 times higher than uniform Pt films for hydrogen evolution reaction (HER), as well as higher current densities than commercial Pt/C and uniform Pt films. Such a strategy is found to be general to other catalysts (e.g., twodimensional PtS) and other reactions (e.g., oxygen evolution reaction). The improved catalytic performance of the mosaic catalysts is attributed to enhanced mass transferability and local electric field, both are determined by the occupation ratio of catalysts. Our work shines new light on manipulating electrocatalysis from the perspective of the spatial structure of catalyst, which would guide the design of efficient catalysts for heterogeneous reactions.

physics.app-ph↗

arXiv2020

Growth of Two-dimensional Compound Materials: Controllability, Material Quality, and Growth Mechanism

CONSPECTUS: Two-dimensional (2D) compound materials are promising materials for use in electronics, optoelectronics, flexible devices, etc. because they are ultrathin and cover a wide range of properties. Among all methods to prepare 2D materials, chemical vapor deposition (CVD) is promising because it produces materials with a high quality and reasonable cost. So far, much efforts have been made to produce 2D compound materials with large domain size, controllable number of layers, fast-growth rate, and high quality features, etc. However, due to the complicated growth mechanism like sublimation and diffusion processes of multiple precursors, maintaining the controllability, repeatability, and high quality of CVD grown 2D binary and ternary materials is still a big challenge, which prevents their widespread use. Here, taking 2D transition metal dichalcogenides (TMDCs) as examples, we review current progress and highlight some promising growth strategies for the growth of 2D compound materials. The key technology issues which affect the CVD process, including non-metal precursor, metal precursor, substrate engineering, temperature, and gas flow, are discussed. Also, methods in improving the quality of CVD-grown 2D materials and current understanding on their growth mechanism are highlighted. Finally, challenges and opportunities in this field are proposed. We believe this review will guide the future design of controllable CVD systems for the growth of 2D compound materials with good controllability and high quality, laying the foundations for their potential applications.

cond-mat.mtrl-sci↗