arXiv subjects

Bin Cheng

Publications and source records attributed to Bin Cheng.

At least 55 records · Page 3Linked to original sources

arXiv2024

The cumulation of debris clouds around a fast-rotating asteroid

The rotational mass loss has been realized to be a prevalent mechanism to produce low-speed debris near the asteroid, and the size composition of the asteroid's surface regolith has been closely measured by in situ explorations. However, the full-scale evolution of the shedding debris has not been examined using the observed particle sizes, which may hold vital clues to the initial growth of an asteroid moonlet, and help us to understand the general mechanisms that dominate the formation of asteroid systems. This paper presented our study on the cumulative evolution of the debris cloud formed by a rotationally unstable asteroid. A semi-analytical model is developed to characterize the spatial-temporal evolution of the debris cloud posterior to a shedding event. Large-scale DEM simulations are performed to quantify the clustering behavior of the debris particles in the mechanical environment near the asteroid. As a result, we found the cumulation of a steady debris cloud is dominated by large pieces of debris, and the shedding particles follow a common migration trend, which fundamentally determines the mass distribution of the debris cloud. For the accretion analysis, we sketched the life cycle of a debris cluster, and showed its dependency on particle size. The DEM simulations adopt physical parameters estimated from observations and asteroid missions. The results confirm porous fluffy cluster structures can form shortly after a shedding event with magnitudes as the observed shedding activities. Measurements to these structures show they possess certain strength and adsorption capacity to collisions from dissociative debris particles.

astro-ph.EP↗

arXiv2024

Multi-Modal Parameter-Efficient Fine-tuning via Graph Neural Network

With the advent of the era of foundation models, pre-training and fine-tuning have become common paradigms. Recently, parameter-efficient fine-tuning has garnered widespread attention due to its better balance between the number of learnable parameters and performance. However, some current parameter-efficient fine-tuning methods only model a single modality and lack the utilization of structural knowledge in downstream tasks. To address this issue, this paper proposes a multi-modal parameter-efficient fine-tuning method based on graph networks. Each image is fed into a multi-modal large language model (MLLM) to generate a text description. The image and its corresponding text description are then processed by a frozen image encoder and text encoder to generate image features and text features, respectively. A graph is constructed based on the similarity of the multi-modal feature nodes, and knowledge and relationships relevant to these features are extracted from each node. Additionally, Elastic Weight Consolidation (EWC) regularization is incorporated into the loss function to mitigate the problem of forgetting during task learning. The proposed model achieves test accuracies on the OxfordPets, Flowers102, and Food101 datasets that improve by 4.45%, 2.92%, and 0.23%, respectively. The code is available at https://github.com/yunche0/GA-Net/tree/master.

cs.CV↗

arXiv2024

Selective and Quasi-continuous Switching of Ferroelectric Chern Insulator Device for Neuromorphic Computing

Topologically protected edge state transport in quantum materials is dissipationless and features quantized Hall conductance, and shows great potential in highly fault-tolerant computing technologies. However, it remains elusive about how to develop topological edge state-based computing devices. Recently, exploration and understanding of interfacial ferroelectricity in various van der Waals heterostructure material systems have received widespread attention among the community of materials science and condensed matter physics3-11. Such ferroelectric polarization emergent at the vdW interface can coexist with other quantum states and thus provides an unprecedented opportunity to electrically switch the topological edge states of interest, which is of crucial significance to the fault-tolerant electronic device applications based on the topological edge states. Here, we report the selective and quasi-continuous ferroelectric switching of topological Chern insulator devices and demonstrate its promising application in noise-immune neuromorphic computing. We fabricate this ferroelectric Chern insulator device by encapsulating magic-angle twisted bilayer graphene with doubly-aligned h-BN layers, and observe the coexistence of the interfacial ferroelectricity and the topological Chern insulating states. This ferroelectricity exhibits an anisotropic dependence on the in-plane magnetic field. By using a VBG pulse with delicately controlled amplitude, we realize the nonvolatile switching between any pair of Chern insulating states and achieve 1280 distinguishable nonvolatile resistance levels on a single device. Furthermore, we demonstrate deterministic switching between two arbitrary levels among the record-high number of nonvolatile resistance levels.

cond-mat.mes-hall↗

arXiv2024

Electrical switching of Ising-superconducting nonreciprocity for quantum neuronal transistor

Nonreciprocal quantum transport effect is mainly governed by the symmetry breaking of the material systems and is gaining extensive attention in condensed matter physics. Realizing electrical switching of the polarity of the nonreciprocal transport without external magnetic field is essential to the development of nonreciprocal quantum devices. However, electrical switching of superconducting nonreciprocity remains yet to be achieved. Here, we report the observation of field-free electrical switching of nonreciprocal Ising superconductivity in Fe3GeTe2/NbSe2 van der Waals (vdW) heterostructure. By taking advantage of this electrically switchable superconducting nonreciprocity, we demonstrate a proof-of-concept nonreciprocal quantum neuronal transistor, which allows for implementing the XOR logic gate and faithfully emulating biological functionality of a cortical neuron in the brain. Our work provides a promising pathway to realize field-free and electrically switchable nonreciprocity of quantum transport and demonstrate its potential in exploring neuromorphic quantum devices with both functionality and performance beyond the traditional devices.

cond-mat.mes-hall↗

arXiv2024

Asteroid Kamo`oalewa's journey from the lunar Giordano Bruno crater to Earth 1:1 resonance

Among the nearly 30,000 known near-Earth asteroids (NEAs), only tens of them possess Earth co-orbital characteristics with semi-major axes $\sim$1 au. In particular, 469219 Kamo`oalewa (2016 HO3), upcoming target of China's Tianwen-2 asteroid sampling mission, exhibits a meta-stable 1:1 mean-motion resonance with Earth. Intriguingly, recent ground-based observations show that Kamo`oalewa has spectroscopic characteristics similar to space-weathered lunar silicates, hinting at a lunar origin instead of an asteroidal one like the vast majority of NEAs. Here we use numerical simulations to demonstrate that Kamo`oalewa's physical and orbital properties are compatible with a fragment from a crater larger than 10--20 km formed on the Moon in the last few million years. The impact could have ejected sufficiently large fragments into heliocentric orbits, some of which could be transferred to Earth 1:1 resonance and persist today. This leads us to suggest the young lunar crater Giordano Bruno (22 km diameter, 1--10 Ma age) as the most likely source, linking a specific asteroid in space to its source crater on the Moon. The hypothesis will be tested by the Tianwen-2 mission when it returns a sample of Kamo`oalewa. And the upcoming NEO Surveyor mission will possibly help us to identify such a lunar-derived NEA population.

astro-ph.EP↗

arXiv2024

Tunable moiré bandgap in hBN-aligned bilayer graphene device with in-situ electrostatic gating

Over the years, great efforts have been devoted in introducing a sizable and tunable band gap in graphene for its potential application in next-generation electronic devices. The primary challenge in modulating this gap has been the absence of a direct method for observing changes of the band gap in momentum space. In this study, we employ advanced spatial- and angle-resolved photoemission spectroscopy technique to directly visualize the gap formation in bilayer graphene, modulated by both displacement fields and moiré potentials. The application of displacement field via in-situ electrostatic gating introduces a sizable and tunable electronic bandgap, proportional to the field strength up to 100 meV. Meanwhile, the moiré potential, induced by aligning the underlying hexagonal boron nitride substrate, extends the bandgap by ~ 20 meV. Theoretical calculations, effectively capture the experimental observations. Our investigation provides a quantitative understanding of how these two mechanisms collaboratively modulate the band gap in bilayer graphene, offering valuable guidance for the design of graphene-based electronic devices.

cond-mat.mes-hall↗

arXiv2024

Interactive Ontology Matching with Cost-Efficient Learning

The creation of high-quality ontologies is crucial for data integration and knowledge-based reasoning, specifically in the context of the rising data economy. However, automatic ontology matchers are often bound to the heuristics they are based on, leaving many matches unidentified. Interactive ontology matching systems involving human experts have been introduced, but they do not solve the fundamental issue of flexibly finding additional matches outside the scope of the implemented heuristics, even though this is highly demanded in industrial settings. Active machine learning methods appear to be a promising path towards a flexible interactive ontology matcher. However, off-the-shelf active learning mechanisms suffer from low query efficiency due to extreme class imbalance, resulting in a last-mile problem where high human effort is required to identify the remaining matches. To address the last-mile problem, this work introduces DualLoop, an active learning method tailored to ontology matching. DualLoop offers three main contributions: (1) an ensemble of tunable heuristic matchers, (2) a short-term learner with a novel query strategy adapted to highly imbalanced data, and (3) long-term learners to explore potential matches by creating and tuning new heuristics. We evaluated DualLoop on three datasets of varying sizes and domains. Compared to existing active learning methods, we consistently achieved better F1 scores and recall, reducing the expected query cost spent on finding 90% of all matches by over 50%. Compared to traditional interactive ontology matchers, we are able to find additional, last-mile matches. Finally, we detail the successful deployment of our approach within an actual product and report its operational performance results within the Architecture, Engineering, and Construction (AEC) industry sector, showcasing its practical value and efficiency.

cs.DB↗

arXiv2024

Interfacial magnetic spin Hall effect in van der Waals Fe3GeTe2/MoTe2 heterostructure

The spin Hall effect (SHE) allows efficient generation of spin polarization or spin current through charge current and plays a crucial role in the development of spintronics. While SHE typically occurs in non-magnetic materials and is time-reversal even, exploring time-reversal-odd (T-odd) SHE, which couples SHE to magnetization in ferromagnetic materials, offers a new charge-spin conversion mechanism with new functionalities. Here, we report the observation of giant T-odd SHE in Fe3GeTe2/MoTe2 van der Waals heterostructure, representing a previously unidentified interfacial magnetic spin Hall effect (interfacial-MSHE). Through rigorous symmetry analysis and theoretical calculations, we attribute the interfacial-MSHE to a symmetry-breaking induced spin current dipole at the vdW interface. Furthermore, we show that this linear effect can be used for implementing multiply-accumulate operations and binary convolutional neural networks with cascaded multi-terminal devices. Our findings uncover an interfacial T-odd charge-spin conversion mechanism with promising potential for energy-efficient in-memory computing.

cond-mat.mes-hall↗

arXiv2024

Friends Across Time: Multi-Scale Action Segmentation Transformer for Surgical Phase Recognition

Automatic surgical phase recognition is a core technology for modern operating rooms and online surgical video assessment platforms. Current state-of-the-art methods use both spatial and temporal information to tackle the surgical phase recognition task. Building on this idea, we propose the Multi-Scale Action Segmentation Transformer (MS-AST) for offline surgical phase recognition and the Multi-Scale Action Segmentation Causal Transformer (MS-ASCT) for online surgical phase recognition. We use ResNet50 or EfficientNetV2-M for spatial feature extraction. Our MS-AST and MS-ASCT can model temporal information at different scales with multi-scale temporal self-attention and multi-scale temporal cross-attention, which enhances the capture of temporal relationships between frames and segments. We demonstrate that our method can achieve 95.26% and 96.15% accuracy on the Cholec80 dataset for online and offline surgical phase recognition, respectively, which achieves new state-of-the-art results. Our method can also achieve state-of-the-art results on non-medical datasets in the video action segmentation domain.

cs.CV↗

arXiv2024

Full-State Prescribed Performance-Based Consensus of Double-Integrator Multi-Agent Systems with Jointly Connected Topologies

This paper addresses the full-state prescribed performance-based consensus problem for double-integrator multi-agent systems with jointly connected topologies. To improve the transient performance, a distributed prescribed performance control protocol consisting of the transformed relative position and the transformed relative velocity is proposed, where the communication topology satisfies the jointly connected assumption. Different from the existing literatures, two independent transient performance specifications imposed on relative positions and relative velocities can be guaranteed simultaneously. A numerical example is ultimately used to validate the effectiveness of proposed protocol.

eess.SY↗

arXiv2024

Structural stability of China's asteroid mission target 2016 HO3 and its possible structure

Asteroid 2016 HO3, a small asteroid (<60 m) in super fast rotation state (~28 min), and is the target of China's Tianwen-2 asteroid sample-return mission. In this work, we investigate its structural stability using an advanced soft-sphere-discrete-element-model code, DEMBody, which is integrated with bonded-aggregate models to simulate highly irregular boulders. The asteroid body is numerically constructed by tens of thousands particles, and then is slowly spin up until structural failure. Rubble piles with different morphologies, grain size distributions and structures are investigated. We find a 2016 HO3 shaped granular asteroid would undergo tensile failure at higher cohesive strengths as opposed to shear failure in lower strengths, regardless of its shape and constituent grain size ratio. Such a failure mode transition is consistent with the priority between the Maximum Tensile Stress criterion criterion and the Drucker-Prager criterion. Therefore, previous works that solely considered the Drucker-Prager failure criterion have underestimated the minimal cohesion strength required for fast-rotating asteroids. We predict that the high spin rate of asteroid 2016 HO3 requires a surface cohesion over ~1 Pa and a bulk cohesion over ~10-20 Pa. Through comparing these strength conditions with the latest data from asteroid missions, we suggest a higher likelihood of a monolithic structure over a typical rubble pile structure. However, the possibility of the latter cannot be completely ruled out. In addition, the asteroid's surface could retain a loose regolith layer globally or only near its poles, which could be the target for sampling of Tianwen-2 mission.

astro-ph.EP↗

arXiv2023

Moire synaptic transistor for homogeneous-architecture reservoir computing

Reservoir computing has been considered as a promising intelligent computing paradigm for effectively processing complex temporal information. Exploiting tunable and reproducible dynamics in the single electronic device have been desired to implement the reservoir and the readout layer of reservoir computing system. Two-dimensional moire material, with an artificial lattice constant many times larger than the atomic length scale, is one type of most studied artificial quantum materials in community of material science and condensed-matter physics over the past years. These materials are featured with gate-tunable periodic potential and electronic correlation, thus varying the electric field allows the electrons in the moire potential per unit cell to exhibit distinct and reproducible dynamics, showing great promise in robust reservoir computing. Here, we report that a moire synaptic transistor can be used to implement the reservoir computing system with a homogeneous reservoir-readout architecture. The synaptic transistor is fabricated based on a h-BN/bilayer graphene/h-BN moire heterostructure, exhibiting ferroelectricity-like hysteretic gate voltage dependence of resistance. Varying the magnitude of the gate voltage enables the moire transistor to be switched between long-term memory and short-term memory with nonlinear dynamics. By employing the short- and long-term memory as the reservoir nodes and weights of the readout layer, respectively, we construct a full-moire physical neural network and demonstrate that the classification accuracy of 90.8% can be achieved for the MNIST handwritten digit database. Our work would pave the way towards the development of neuromorphic computing based on the moire materials.

cond-mat.mes-hall↗

arXiv2023

Parallel in-memory wireless computing

Parallel wireless digital communication with ultralow power consumption is critical for emerging edge technologies such as 5G and Internet of Things. However, the physical separation between digital computing units and analogue transmission units in traditional wireless technology leads to high power consumption. Here we report a parallel in-memory wireless computing scheme. The approach combines in-memory computing with wireless communication using memristive crossbar arrays. We show that the system can be used for the radio transmission of a binary stream of 480 bits with a bit error rate of 0. The in-memory wireless computing uses two orders of magnitude less power than conventional technology (based on digital-to-analogue and analogue-to-digital converters). We also show that the approach can be applied to acoustic and optical wireless communications

cs.AR↗

arXiv2023

General Image-to-Image Translation with One-Shot Image Guidance

Large-scale text-to-image models pre-trained on massive text-image pairs show excellent performance in image synthesis recently. However, image can provide more intuitive visual concepts than plain text. People may ask: how can we integrate the desired visual concept into an existing image, such as our portrait? Current methods are inadequate in meeting this demand as they lack the ability to preserve content or translate visual concepts effectively. Inspired by this, we propose a novel framework named visual concept translator (VCT) with the ability to preserve content in the source image and translate the visual concepts guided by a single reference image. The proposed VCT contains a content-concept inversion (CCI) process to extract contents and concepts, and a content-concept fusion (CCF) process to gather the extracted information to obtain the target image. Given only one reference image, the proposed VCT can complete a wide range of general image-to-image translation tasks with excellent results. Extensive experiments are conducted to prove the superiority and effectiveness of the proposed methods. Codes are available at https://github.com/CrystalNeuro/visual-concept-translator.

cs.CV↗

arXiv2023

Quantum Computing by Quantum Walk on Quantum Slide

Continuous-time quantum walk is one of the alternative approaches to quantum computation, where a universal set of quantum gates can be achieved by scattering a quantum walker on some specially-designed structures embedded in a sparse graph [Childs, Phys. Rev. Lett. 2009]. Recent advances in femtosecond laser-inscribed optical waveguides represent a promising physical platform for realizing this quantum-walk model of quantum computation. However, the major challenge is the problem of preparing a plane-wave initial state. Previously, the idea of quantum slide has been proposed and experimentally realized for demonstrating the working principle of NAND tree [Wang et al. Phy. Rev. Lett. 2020]. Here we show how quantum slide can be further applied to realize universal quantum computation, bypassing the plane-wave requirement. Specifically, we apply an external field to the perfect-state-transfer chain, which can generate a moving Gaussian wave packet with an arbitrary momentum. When the phase is properly tuned, the universal gate set in Childs' proposal can be realized in our scheme. Furthermore, we show that the gate fidelities increase with the length of the slide, and can reach unity asymptotically.

quant-ph↗

arXiv2023

The common trend of saltation particles on the surface of fast-rotating asteroids

An asteroid spun up to its critical limit has unique surface mechanical properties that its gravity and the centrifugal force largely balance, creating a relaxation environment where low-energy events such as mass shedding may trigger subsequent long complex motion of an asteroid's regolith grains. Exploring such an evolution process may provide key clues for understanding the early formation of multi-asteroid systems. This paper investigates the complex evolution process of loose particles becoming triggered by shedding events and the dependency of their dynamical propagation on the contact mechanical properties of the asteroid surface. We present a numerical model for tracking the trajectory of a shed particle that considers the collision between the particle and the surface of an asteroid. Monte Carlo simulations are performed to reflect the statistical behavior of shed particles. We also introduce zero-velocity surfaces to our data-based analysis in order to reveal the intrinsic invariance of the evolutionary processes. We used the average mechanical energy of the particle cloud to check the connection between contact property and the temporal-spatial distribution of the shed particles. We sketch a common evolutionary path of the particle in the vicinity of a fast-rotating asteroid, that is, particles dislodged from the unstable region will eventually enter, through several collisions with the surface, non-return orbits that launch from the minimum geopotential area of the unstable region. The common trend is independent of any particular asteroid morphology, and all shed particles enter the same evolutionary path. We also find that the orbital energy of the particle cloud is statistically independent of the surface contact property, meaning that the collision coefficient of restitution is a nonsensitive parameter in the outward spreading process of the shed particles.

astro-ph.EP↗

arXiv2023

Noisy intermediate-scale quantum computers

Quantum computers have made extraordinary progress over the past decade, and significant milestones have been achieved along the path of pursuing universal fault-tolerant quantum computers. Quantum advantage, the tipping point heralding the quantum era, has been accomplished along with several waves of breakthroughs. Quantum hardware has become more integrated and architectural compared to its toddler days. The controlling precision of various physical systems is pushed beyond the fault-tolerant threshold. Meanwhile, quantum computation research has established a new norm by embracing industrialization and commercialization. The joint power of governments, private investors, and tech companies has significantly shaped a new vibrant environment that accelerates the development of this field, now at the beginning of the noisy intermediate-scale quantum era. Here, we first discuss the progress achieved in the field of quantum computation by reviewing the most important algorithms and advances in the most promising technical routes, and then summarizing the next-stage challenges. Furthermore, we illustrate our confidence that solid foundations have been built for the fault-tolerant quantum computer and our optimism that the emergence of quantum killer applications essential for human society shall happen in the future.

quant-ph↗

arXiv2023

Experimental Simulation of Larger Quantum Circuits with Fewer Superconducting Qubits

Although near-term quantum computing devices are still limited by the quantity and quality of qubits in the so-called NISQ era, quantum computational advantage has been experimentally demonstrated. Moreover, hybrid architectures of quantum and classical computing have become the main paradigm for exhibiting NISQ applications, where low-depth quantum circuits are repeatedly applied. In order to further scale up the problem size solvable by the NISQ devices, it is also possible to reduce the number of physical qubits by "cutting" the quantum circuit into different pieces. In this work, we experimentally demonstrated a circuit-cutting method for simulating quantum circuits involving many logical qubits, using only a few physical superconducting qubits. By exploiting the symmetry of linear-cluster states, we can estimate the effectiveness of circuit-cutting for simulating up to 33-qubit linear-cluster states, using at most 4 physical qubits for each subcircuit. Specifically, for the 12-qubit linear-cluster state, we found that the experimental fidelity bound can reach as much as 0.734, which is about 19\% higher than a direct simulation {on the same} 12-qubit superconducting processor. Our results indicate that circuit-cutting represents a feasible approach of simulating quantum circuits using much fewer qubits, while achieving a much higher circuit fidelity.

quant-ph↗