arXiv subjects

Bin Liang

Publications and source records attributed to Bin Liang.

157 records · Page 9Linked to original sources

arXiv2018

Experimental Realization of Acoustic Chern Insulator

Topological insulators are new states of matter in which the topological phase originates from symmetry breaking. Recently, time-reversal invariant topological insulators were demonstrated for classical wave systems, such as acoustic systems, but limited by inter-pseudo-spin or inter-valley backscattering. This challenge can be effectively overcome via breaking the time-reversal symmetry. Here, we report the first experimental realization of acoustic topological insulators with nonzero Chern numbers, viz., acoustic Chern insulator (ACI), by introducing an angular-momentum-biased resonator array with broken Lorentz reciprocity. High Q-factor resonance is leveraged to reduce the required speed of rotation. Experimental results show that the ACI featured with a stable and uniform metafluid flow bias supports one-way nonreciprocal transport of sound at the boundaries, which is topologically immune to the defect-induced scatterings. Our work opens up opportunities for exploring unique observable topological phases and developing practical nonreciprocal devices in acoustics.

cond-mat.mes-hall↗

arXiv2017

Omnidirectional Ventilated Acoustic Barrier

As an important problem in acoustics, sound insulation finds applications in a great variety of situations. In the existing schemes, however, there has always been a tradeoff between the thinness of sound-insulating devices and their ventilating capabilities, limiting their potentials in the control of low-frequency sound in high ventilation environments. Here we design and experimentally implement an omnidirectional acoustic barrier with planar profile, subwavelength thickness (0.18lambda) yet high ventilation. The proposed mechanism is based on the interference between the resonant scattering of discrete states and the background scattering of continuous states that induces Fano-like asymmetric transmission profile. Benefitting from the binarystructured design of coiled unit and hollow pipe, it maximally simplifies the design and fabrication while ensuring the ventilation for all the non resonant units with open tubes. The simulated and measured results agree well, showing the effectiveness of our proposed mechanism to block low frequency sound coming from various directions while allowing 63% of the air flow to pass. We anticipate our design to open routes to design sound insulators and to enable applications in traditionally unattainable cases such as those calling for noise reduction and cooling simultaneously.

physics.app-ph↗

arXiv2017

Twisted Acoustics

We use metasurfaces to enable acoustic orbital angular momentum (a-OAM) based multiplexing in real-time, postprocess-free and sensor-scanning-free fashions to improve the bandwidth of acoustic communication, with intrinsic compatibility and expandability to cooperate with other multiplexing technologies. The mechanism relied on encoding information onto twisted beams is numerically and experimentally demonstrated by realizing the real-time picture transfer, which differs from existing static data transfer by encoding data onto OAM states. Our study can boost the capacity of acoustic communication links and offer potential to revolutionize relevant fields.

physics.app-ph↗

arXiv2017

Critical phenomena and chemical potential of charged AdS black hole

We study the thermodynamics and the chemical potential for a five-dimensional charged AdS black hole by treating the cosmological constant as the number of colors $N$ in the boundary gauge theory and its conjugate quantity as the associated chemical potential $μ$. It is found that there exists a small-large black hole phase transition. The critical phenomena are investigated in the $N^{2}$-$μ$ chart. In particular, in the reduced parameter space, all the thermodynamic quantities can be rescaled with the black hole charge such that these reduced quantities are charge-independent. Then we obtain the coexistence curve and the phase diagram. The latent heat is also numerically calculated. Moreover, the heat capacity and the thermodynamic scalar are studied. The result indicates that the information of the first-order black hole phase transition is encoded in the heat capacity and scalar. However, the phase transition point cannot be directly calculated with them. Nevertheless, the critical point linked to a second-order phase transition can be determined by either the heat capacity or the scalar. In addition, we calculate the critical exponents of the heat capacity and the scalar for the saturated small and large black holes near the critical point.

gr-qc↗

arXiv2017

Directional radiation of sound waves by a subwavelength source

We propose and experimentally achieve a directional dipole field radiated by an omnidirectional monopole source enclosed in a subwavelength structure of acoustically hybrid resonances. The whole structure has its every dimension at an order smaller than the sound wavelength. The significance is that the radiation efficiency is up to 2.3 of the radiation by traditional dipole consisting of two out-of-phase monopoles in the same space. This study eventually takes an essential step towards solving the long-existing barrier of inefficient radiation of directional sound waves in low frequencies, and inspires the ultimate radiation of arbitrary multipoles or even a highly directional beam by a monopole in limited spaces.

physics.class-ph↗

arXiv2017

Ultra-thin Acoustic Metasurface-Based Schroeder Diffuser

Schroeder diffuser is a classical design, proposed over 40 years ago, for artificially creating optimal and predictable sound diffuse reflection. It has been widely adopted in architectural acoustics and it has also shown substantial potential in noise control, ultrasound imaging, microparticle manipulation, among others. The conventional Schroeder diffuser, however, has a considerable thickness on the order of one wavelength, severely impeding its applications for low frequency sound. In this paper, a new class of ultra-thin and planar Schroeder diffusers are proposed based on the concept of acoustic metasurface. Both numerical and experimental results demonstrate satisfactory sound diffuse reflection produced from the metasurface-based Schroeder diffuser despite it being one order of magnitude thinner than the conventional one. The proposed design not only offer promising building blocks with great potential to profoundly impact architectural acoustics and related fields, but also constitutes a major step towards real-world applications of acoustic metasurfaces.

physics.class-ph↗

arXiv2016

Non-Hermitian acoustic metamaterial for the complete control of sound by accessing the exceptional points

Non-Hermitian systems always play a negative role in wave manipulations due to inherent non-conservation of energy as well as loss of information. Recently, however, there has been a paradigm shift on utilizing non-Hermitian systems to implement varied miraculous wave controlling. For example, parity-time symmetric media with well-designed loss and gain are presented to create a nontrivial effect of unidirectional diffraction, which is observed near the exceptional points (EPs) in the non-Hermitian systems. Here, we report the design and realization of non-Hermitian acoustic metamaterial (NHAM) and show that by judiciously tailoring the inherent loss, the phase and amplitude of reflection can possibly be tuned in a decoupled manner. Such decoupled tuning of phase and amplitude is closely related to the EPs. As a demonstration of functionality, we experimentally generate a high-quality acoustic hologram via NHAM. Our work may open a new degree of freedom for realizing the complete control of sound.

physics.class-ph↗

arXiv2015

An acoustic invisible gateway

The recently-emerged concept of "invisible gateway" with the extraordinary capability to block the waves but allow the passage of other entities has attracted great attentions due to the general interests in illusion devices. However, the possibility to realize such a fascinating phenomenon for acoustic waves has not yet been explored, which should be of paramount significance for acoustical applications but would necessarily involve experimental difficulty. Here we design and experimentally demonstrate an acoustic invisible gateway (AIG) capable of concealing a channel under the detection of sound. Instead of "restoring" a whole block of background medium by using transformation acoustics that inevitably requires complementary or restoring media with extreme parameters, we propose an inherently distinct methodology that only aims at engineering the surface impedance at the "gate" to mimic a rigid "wall" and can be conveniently implemented by decorating meta-structures behind the channel. Such a simple yet effective design of AIG also enables analyzing the physics behind this extraordinary phenomenon in an analytical manner, which agrees quite well with the numerical and experimental results. Furthermore, our scheme offers possibility to manipulate the symmetry of AIGs freely, which is proven both theoretically and experimentally by demonstrating two distinctive examples of one-way and two-way AIGs. We anticipate the realization of AIGs will open new avenues to illusion acoustics with potential applications in acoustic measurement and acoustic device, and provide inspirations for similar researches in other fields.

physics.class-ph↗

arXiv2015

Broadband non-reciprocal transmission of sound with invariant frequency

The emergence of "acoustic diode" (AD) capable of rectifying acoustic wave like electrical diodes do to electricity has been believed to be able to offer unconventional manipulation on sound, e.g., to isolate the wrong-way reflection, and therefore have great potential in various important scenarios such as medical ultrasound applications. However, the existing ADs have always been suffering from the problem that the transmitted wave must have either doubled frequency or deviated direction, lacking the most crucial features for achieving such expectations in practice. Here we design and experimentally demonstrate a broadband yet compact non-reciprocal device with hitherto inaccessible functionality of maintaining the original frequency and high forward transmission while virtually blocking the backscattered wave, which is close to what a perfect AD is expected to provide and is promising to play the essential role in realistic acoustic systems like electric diodes do in electrical circuits. Such an extreme ability comes from inherently distinct mechanism based on the exploration of the acoustic characteristics in complex domain, in comparison to the previous designs that only utilize the real part of acoustical parameters. Furthermore, our design enables improving the sensitivity and the robustness of device simultaneously by tailoring an individual structural parameter, which can be regarded as the unique advantage over its electrical or thermal counterparts. We envision our design will take a significant step towards the realization of applicable acoustic one-way devices with potential applications in many scenarios, and inspire the research of non-reciprocal wave manipulation in other fields like electromagnetics.

physics.class-ph↗

arXiv2014

Experimental realizations of full control of reflected waves with subwavelength acoustic metasurfaces

Metasurfaces with subwavelength thickness have exhibited unconventional phenomena in ways that could not be mimicked by traditional materials. Here we report the analytical design and experimental realizations of acoustic metasurface with hitherto inaccessible functionality of manipulating the reflected waves arbitrarily. By suitably designing the phase shift profile covering 2 range induced by labyrinthine units, the metasurface can reflect acoustic waves in an unusual yet controllable manner. Anomalous reflection and ultrathin planar lens with adjustable focal point were both demonstrated with carefully designed metasurfaces. Remarkably, the free manipulation of phase shifts offers great flexibility in the design of non-paraxial or paraxial acoustic self-accelerating beams with arbitrary trajectories. With the extraordinary wave-steering ability, the metasurface should open exciting possibilities for designing compact acoustic components with versatile potential and may find a variety of applications ranging from ultrasound imaging to field caustic engineering.

cond-mat.mtrl-sci↗

arXiv2014

Ultra-Broadband Acoustic Metasurface for Manipulating the Reflected Waves

We have designed and experimentally realized an ultra-broadband acoustic metasurface (UBAM) capable of going beyond the intrinsic limitation of bandwidth in existing designs of optical/acoustical metasurfaces. Both the numerical and experimental results demonstrate that the UBAM made of subwavelength gratings can manipulate the reflected phase-front within a bandwidth larger than 2 octaves. A simple physical model based on the phased array theory is developed for interpreting this extraordinary phenomenon as well as obtaining deeper insight to the underlying physics of our design. We anticipate the UBAM to open new avenue to the design and application of broadband acoustical devices.

cond-mat.mtrl-sci↗

arXiv2014

Broadband omnidirectional invisibility for sound in three dimensions

Acoustic cloaks that make object undetectable to sound waves have potential applications in a variety of scenarios and have received increasing interests recently. However, the experimental realization of a three-dimensional (3D) acoustic cloak that works within broad ranges of operating frequency and incident angle still remains a challenge despite the paramount importance for the practical application of cloaking devices. Here we report the design and experimental demonstration of the first 3D broadband cloak capable of cancelling the scattering field near curved surfaces. Unlike the ground cloaks that only work in the presence of a flat boundary, the proposed scheme can render the invisibility effect for an arbitrarily curved boundary. The designed cloak simply comprises homogeneous positive-index anisotropic materials, with parameters completely independent of either the cloaked object or the boundary. With the flexibility of applying to arbitrary boundaries and the potential of being extended to yield 3D acoustic illusion effects, our method may take major a step toward the application of acoustic cloaks in reality and open the avenue to build other acoustic devices with versatile functionalities.

physics.class-ph↗

arXiv2006

Dynamic Balance Control of Multi-arm Free-Floating Space Robots

This paper investigates the problem of the dynamic balance control of multi-arm free-floating space robot during capturing an active object in close proximity. The position and orientation of space base will be affected during the operation of space manipulator because of the dynamics coupling between the manipulator and space base. This dynamics coupling is unique characteristics of space robot system. Such a disturbance will produce a serious impact between the manipulator hand and the object. To ensure reliable and precise operation, we propose to develop a space robot system consisting of two arms, with one arm (mission arm) for accomplishing the capture mission, and the other one (balance arm) compensating for the disturbance of the base. We present the coordinated control concept for balance of the attitude of the base using the balance arm. The mission arm can move along the given trajectory to approach and capture the target with no considering the disturbance from the coupling of the base. We establish a relationship between the motion of two arm that can realize the zeros reaction to the base. The simulation studies verified the validity and efficiency of the proposed control method.

cs.RO↗