arXiv subjects

Bin Xiang

Publications and source records attributed to Bin Xiang.

15 recordsLinked to original sources

arXiv2026

Pronounced in-plane anomalous Hall effect with vanishing out-of-plane response in Cr1.2Te2

We report an unconventional anomalous Hall regime in the van der Waals ferromagnet Cr1.2Te2, in which the anomalous Hall effect (AHE) is present for in-plane magnetization but absent for out-of-plane magnetization. In this purely in-plane regime, the anomalous Hall signal exhibits a threefold angular dependence during both in-plane and out-of-plane rotations of the magnetization, which cannot be accounted for by the conventional dipolar contribution but instead requires an octupolar contribution. Although the octupolar term qualitatively captures the observed behavior, the experimentally extracted octupole differs quantitatively from first-principles calculations based solely on the intrinsic Berry-curvature mechanism, indicating an essential role for extrinsic scattering processes.

cond-mat.mtrl-sci↗

arXiv2025

Atomic-scale spin sensing of a 2D $d$-wave altermagnet via helical tunneling

Altermagnetism simultaneously possesses nonrelativistic spin responses and zero net magnetization, thus combining advantages of ferromagnetism and antiferromagnetism. This superiority originates from its unique dual feature, i.e., opposite-magnetic sublattices in real space and alternating spin polarization in momentum space enforced by the same crystal symmetry. Therefore, the determination of an altermagnetic order and its unique spin response inherently necessitates atomic-scale spin-resolved measurements in real and momentum spaces, an experimental milestone yet to be achieved. Here, via utilizing the helical edge (hinge) modes of a higher order topological insulator as the spin sensor, we realize spin-resolved scanning tunneling microscopy which enables us to pin down the dual-space feature of a layered $d$-wave altermagnet, KV$_2$Se$_2$O. In real space, atomic-registered mapping demonstrates the checkerboard antiferromagnetic order together with density-wave lattice modulation, and in momentum space, spin-resolved spectroscopic imaging provides a direct visualization of d-wave spin splitting of the band structure. Critically, using this new topology-guaranteed spin filter we directly reveal the unidirectional, spin-polarized quasiparticle excitations originating from the crystal symmetry-paired X and Y valleys around opposite magnetic sublattices simultaneously --the unique spin response for $d$-wave altermagnetism. Our experiments establish a solid basis for the exploration and utilization of altermagnetism in layered materials and further facilitate access to atomic-scale spin sensing and manipulating of 2D quantum materials.

cond-mat.mes-hall↗

arXiv2025

Generative AI Enabled Robust Sensor Placement in Cyber-Physical Power Systems: A Graph Diffusion Approach

With advancements in physical power systems and network technologies, integrated Cyber-Physical Power Systems (CPPS) have significantly enhanced system monitoring and control efficiency and reliability. This integration, however, introduces complex challenges in designing coherent CPPS, particularly as few studies concurrently address the deployment of physical layers and communication connections in the cyber layer. This paper addresses these challenges by proposing a framework for robust sensor placement to optimize anomaly detection in the physical layer and enhance communication resilience in the cyber layer. We model the CPPS as an interdependent network via a graph, allowing for simultaneous consideration of both layers. Then, we adopt the Log-normal Shadowing Path Loss (LNSPL) model to ensure reliable data transmission. Additionally, we leverage the Fiedler value to measure graph resilience against line failures and three anomaly detectors to fortify system safety. However, the optimization problem is NP-hard. Therefore, we introduce the Experience Feedback Graph Diffusion (EFGD) algorithm, which utilizes a diffusion process to generate optimal sensor placement strategies. This algorithm incorporates cross-entropy gradient and experience feedback mechanisms to expedite convergence and generate higher reward strategies. Extensive simulations demonstrate that the EFGD algorithm enhances model convergence by 18.9% over existing graph diffusion methods and improves average reward by 22.90% compared to Denoising Diffusion Policy Optimization (DDPO) and 19.57% compared to Graph Diffusion Policy Optimization (GDPO), thereby significantly bolstering the robustness and reliability of CPPS operations.

eess.SY↗

arXiv2024

Predicting Cascading Failures with a Hyperparametric Diffusion Model

In this paper, we study cascading failures in power grids through the lens of information diffusion models. Similar to the spread of rumors or influence in an online social network, it has been observed that failures (outages) in a power grid can spread contagiously, driven by viral spread mechanisms. We employ a stochastic diffusion model that is Markovian (memoryless) and local (the activation of one node, i.e., transmission line, can only be caused by its neighbors). Our model integrates viral diffusion principles with physics-based concepts, by correlating the diffusion weights (contagion probabilities between transmission lines) with the hyperparametric Information Cascades (IC) model. We show that this diffusion model can be learned from traces of cascading failures, enabling accurate modeling and prediction of failure propagation. This approach facilitates actionable information through well-understood and efficient graph analysis methods and graph diffusion simulations. Furthermore, by leveraging the hyperparametric model, we can predict diffusion and mitigate the risks of cascading failures even in unseen grid configurations, whereas existing methods falter due to a lack of training data. Extensive experiments based on a benchmark power grid and simulations therein show that our approach effectively captures the failure diffusion phenomena and guides decisions to strengthen the grid, reducing the risk of large-scale cascading failures. Additionally, we characterize our model's sample complexity, improving upon the existing bound.

cs.SI↗

arXiv2024

Room temperature magnetic phase transition in an electrically-tuned van der Waals ferromagnet

Finding tunable van der Waals (vdW) ferromagnets that operate at above room temperature is an important research focus in physics and materials science. Most vdW magnets are only intrinsically magnetic far below room temperature and magnetism with square-shaped hysteresis at room-temperature has yet to be observed. Here, we report magnetism in a quasi-2D magnet Cr1.2Te2 observed at room temperature (290 K). This magnetism was tuned via a protonic gate with an electron doping concentration up to 3.8 * 10^21 cm^-3. We observed non-monotonic evolutions in both coercivity and anomalous Hall resistivity. Under increased electron doping, the coercivities and anomalous Hall effects (AHEs) vanished, indicating a doping-induced magnetic phase transition. This occurred up to room temperature. DFT calculations showed the formation of an antiferromagnetic (AFM) phase caused by the intercalation of protons which induced significant electron doping in the Cr1.2Te2. The tunability of the magnetic properties and phase in room temperature magnetic vdW Cr1.2Te2 is a significant step towards practical spintronic devices.

cond-mat.mtrl-sci↗

arXiv2024

Description on IEEE ICME 2024 Grand Challenge: Semi-supervised Acoustic Scene Classification under Domain Shift

Acoustic scene classification (ASC) is a crucial research problem in computational auditory scene analysis, and it aims to recognize the unique acoustic characteristics of an environment. One of the challenges of the ASC task is the domain shift between training and testing data. Since 2018, ASC challenges have focused on the generalization of ASC models across different recording devices. Although this task, in recent years, has achieved substantial progress in device generalization, the challenge of domain shift between different geographical regions, involving discrepancies such as time, space, culture, and language, remains insufficiently explored at present. In addition, considering the abundance of unlabeled acoustic scene data in the real world, it is important to study the possible ways to utilize these unlabelled data. Therefore, we introduce the task Semi-supervised Acoustic Scene Classification under Domain Shift in the ICME 2024 Grand Challenge. We encourage participants to innovate with semi-supervised learning techniques, aiming to develop more robust ASC models under domain shift.

eess.AS↗

arXiv2021

Joint Planning of Network Slicing and Mobile Edge Computing: Models and Algorithms

Multi-access Edge Computing (MEC) facilitates the deployment of critical applications with stringent QoS requirements, latency in particular. This paper considers the problem of jointly planning the availability of computational resources at the edge, the slicing of mobile network and edge computation resources, and the routing of heterogeneous traffic types to the various slices. These aspects are intertwined and must be addressed together to provide the desired QoS to all mobile users and traffic types still keeping costs under control. We formulate our problem as a mixed-integer nonlinear program (MINLP) and we define a heuristic, named Neighbor Exploration and Sequential Fixing (NESF), to facilitate the solution of the problem. The approach allows network operators to fine tune the network operation cost and the total latency experienced by users. We evaluate the performance of the proposed model and heuristic against two natural greedy approaches. We show the impact of the variation of all the considered parameters (viz., different types of traffic, tolerable latency, network topology and bandwidth, computation and link capacity) on the defined model. Numerical results demonstrate that NESF is very effective, achieving near-optimal planning and resource allocation solutions in a very short computing time even for large-scale network scenarios.

cs.NI↗

arXiv2021

Intelligent Decision Method for Main Control Parameters of Tunnel Boring Machine based on Multi-Objective Optimization of Excavation Efficiency and Cost

Timely and reasonable matching of the control parameters and geological conditions of the rock mass in tunnel excavation is crucial for hard rock tunnel boring machines (TBMs). Therefore, this paper proposes an intelligent decision method for the main control parameters of the TBM based on the multi-objective optimization of excavation efficiency and cost. The main objectives of this method are to obtain the most important parameters of the rock mass and machine, determine the optimization objective, and establish the objective function. In this study, muck information was included as an important parameter in the traditional rock mass and machine parameter database. The rock-machine interaction model was established through an improved neural network algorithm. Using 250 sets of data collected in the field, the validity of the rock-machine interaction relationship model was verified. Then, taking the cost as the optimization objective, the cost calculation model related to tunneling and the cutter was obtained. Subsequently, combined with rock-machine interaction model, the objective function of control parameter optimization based on cost was established. Finally, a tunneling test was carried out at the engineering site, and the main TBM control parameters (thrust and torque) after the optimization decision were used to excavate the test section. Compared with the values in the section where the TBM operators relied on experience, the average penetration rate of the TBM increased by 11.10%, and the average cutter life increased by 15.62%. The results indicate that this method can play an effective role in TBM tunneling in the test section.

eess.SY↗

arXiv2021

Tunable anomalous Hall transport in bulk and two-dimensional 1$T$-CrTe$_{2}$: A first-principles study

Layered materials with robust magnetic ordering have been attracting significant research interest. In recent experiments, a new layered material 1$T$-CrTe$_{2}$ has been synthesized and exhibits ferromagnetism above the room temperature. Here, based on first-principles calculations, we investigate the electronic, magnetic, and transport properties of 1$T$-CrTe$_{2}$, both in the bulk and in the two-dimensional (2D) limit. We show that 1$T$-CrTe$_{2}$ can be stable in the monolayer form, and has a low exfoliation energy. The monolayer structure is an intrinsic ferromagnetic metal, which maintains a high Curie temperature above the room temperature. Particularly, we reveal interesting features in the anomalous Hall transport. We show that in the ground state, both bulk and monolayer 1$T$-CrTe$_{2}$ possess vanishing anomalous Hall effect, because the magnetization preserves one vertical mirror symmetry. The anomalous Hall conductivity can be made sizable by tuning the magnetization direction or by uniaxial strains that break the mirror symmetry. The room-temperature 2D ferromagnetism and the tunable anomalous Hall effect make the material a promising platform for nanoscale device applications.

cond-mat.mtrl-sci↗

arXiv2020

Highly anisotropic two-dimensional metal in monolayer MoOCl$_2$

Anisotropy is a general feature in materials. Strong anisotropy could lead to interesting physical properties and useful applications. Here, based on first-principles calculations and theoretical analysis, we predict a stable two-dimensional (2D) material---the monolayer MoOCl$_2$, and show that it possesses intriguing properties related to its high anisotropy. Monolayer MoOCl$_2$ can be readily exfoliated from the van der Waals layered bulk, which has already been synthesized. We show that a high in-plane anisotropy manifests in the structural, phononic, mechanical, electronic, and optical properties of monolayer MoOCl$_2$. The material is a metal with highly anisotropic Fermi surfaces, giving rise to open orbits at the Fermi level, which can be probed in magneto-transport. Remarkably, the combination of high anisotropy and metallic character makes monolayer MoOCl$_2$ an almost ideal hyperbolic material. It has two very wide hyperbolic frequency windows from 0.41 eV (99 THz) to 2.90 eV (701 THz), and from 3.63 eV (878 THz) to 5.54 eV (1340 THz). The former window has a large overlap with the visible spectrum, and the dissipation for most part of this window is very small. The window can be further tuned by the applied strain, such that at a chosen frequency, a transition between elliptic and hyperbolic character can be induced by strain. Our work discovers a highly anisotropic 2D metal with extraordinary properties, which holds great potential for electronic and optical applications.

cond-mat.mtrl-sci↗

arXiv2020

Comparison Lift: Bandit-based Experimentation System for Online Advertising

Comparison Lift is an experimentation-as-a-service (EaaS) application for testing online advertising audiences and creatives at JD.com. Unlike many other EaaS tools that focus primarily on fixed sample A/B testing, Comparison Lift deploys a custom bandit-based experimentation algorithm. The advantages of the bandit-based approach are two-fold. First, it aligns the randomization induced in the test with the advertiser's goals from testing. Second, by adapting experimental design to information acquired during the test, it reduces substantially the cost of experimentation to the advertiser. Since launch in May 2019, Comparison Lift has been utilized in over 1,500 experiments. We estimate that utilization of the product has helped increase click-through rates of participating advertising campaigns by 46% on average. We estimate that the adaptive design in the product has generated 27% more clicks on average during testing compared to a fixed sample A/B design. Both suggest significant value generation and cost savings to advertisers from the product.

cs.LG↗

arXiv2020

Fermi liquid behavior and colossal magnetoresistance in layered MoOCl2

A characteristic of a Fermi liquid is the T^2 dependence of its resistivity, sometimes referred to as the Baber law. However, for most metals, this behavior is only restricted to very low temperatures, usually below 20 K. Here, we experimentally demonstrate that for the single-crystal van der Waals layered material MoOCl2, the Baber law holds in a wide temperature range up to ~120 K, indicating that the electron-electron scattering plays a dominant role in this material. Combining with the specific heat measurement, we find that the modified Kadowaki-Woods ratio of the material agrees well with many other strongly correlated metals. Furthermore, in the magneto-transport measurement, a colossal magneto-resistance is observed, which reaches ~350% at 9 T and displays no sign of saturation. With the help of first-principles calculations, we attribute this behavior to the presence of open orbits on the Fermi surface. We also suggest that the dominance of electron-electron scattering is related to an incipient charge density wave state of the material. Our results establish MoOCl2 as a strongly correlated metal and shed light on the underlying physical mechanism, which may open a new path for exploring the effects of electron-electron interaction in van der Waals layered structures.

cond-mat.mtrl-sci↗

arXiv2020

Edge-assisted Viewport Adaptive Scheme for real-time Omnidirectional Video transmission

Omnidirectional applications are immersive and highly interactive, which can improve the efficiency of remote collaborative work among factory workers. The transmission of omnidirectional video (OV) is the most important step in implementing virtual remote collaboration. Compared with the ordinary video transmission, OV transmission requires more bandwidth, which is still a huge burden even under 5G networks. The tile-based scheme can reduce bandwidth consumption. However, it neither accurately obtain the field of view(FOV) area, nor difficult to support real-time OV streaming. In this paper, we propose an edge-assisted viewport adaptive scheme (EVAS-OV) to reduce bandwidth consumption during real-time OV transmission. First, EVAS-OV uses a Gated Recurrent Unit(GRU) model to predict users' viewport. Then, users were divided into multicast clusters thereby further reducing the consumption of computing resources. EVAS-OV reprojects OV frames to accurately obtain users' FOV area from pixel level and adopt a redundant strategy to reduce the impact of viewport prediction errors. All computing tasks were offloaded to edge servers to reduce the transmission delay and improve bandwidth utilization. Experimental results show that EVAS-OV can save more than 60\% of bandwidth compared with the non-viewport adaptive scheme. Compared to a two-layer scheme with viewport adaptive, EVAS-OV still saves 30\% of bandwidth.

cs.MM↗

arXiv2020

Reinforcement Learning Driven Adaptive VR Streaming with Optical Flow Based QoE

With the merit of containing full panoramic content in one camera, Virtual Reality (VR) and 360-degree videos have attracted more and more attention in the field of industrial cloud manufacturing and training. Industrial Internet of Things (IoT), where many VR terminals needed to be online at the same time, can hardly guarantee VR's bandwidth requirement. However, by making use of users' quality of experience (QoE) awareness factors, including the relative moving speed and depth difference between the viewpoint and other content, bandwidth consumption can be reduced. In this paper, we propose OFB-VR (Optical Flow Based VR), an interactive method of VR streaming that can make use of VR users' QoE awareness to ease the bandwidth pressure. The Just-Noticeable Difference through Optical Flow Estimation (JND-OFE) is explored to quantify users' awareness of quality distortion in 360-degree videos. Accordingly, a novel 360-degree videos QoE metric based on PSNR and JND-OFE (PSNR-OF) is proposed. With the help of PSNR-OF, OFB-VR proposes a versatile-size tiling scheme to lessen the tiling overhead. A Reinforcement Learning(RL) method is implemented to make use of historical data to perform Adaptive BitRate(ABR). For evaluation, we take two prior VR streaming schemes, Pano and Plato, as baselines. Vast evaluations show that our system can increase the mean PSNR-OF score by 9.5-15.8% while maintaining the same rebuffer ratio compared with Pano and Plato in a fluctuate LTE bandwidth dataset. Evaluation results show that OFB-VR is a promising prototype for actual interactive industrial VR. A prototype of OFB-VR can be found in https://github.com/buptexplorers/OFB-VR.

cs.MM↗

arXiv2013

A Nanoscale Shape Memory Oxide

Stimulus-responsive shape memory materials have attracted tremendous research interests recently, with much effort focused on improving their mechanical actuation. Driven by the needs of nanoelectromechnical devices, materials with large mechanical strain particularly at nanoscale are therefore desired. Here we report on the discovery of a large shape memory effect in BiFeO3 at the nanoscale. A maximum strain of up to ~14% and a large volumetric work density can be achieved in association with a martensitic-like phase transformation. With a single step, control of the phase transformation by thermal activation or electric field has been reversibly achieved without the assistance of external recovery stress. Although aspects such as hysteresis, micro-cracking etc. have to be taken into consideration for real devices, the large shape memory effect in this oxide surpasses most alloys and therefore demonstrates itself as an extraordinary material for potential use in state-of-art nano-systems.

cond-mat.mtrl-sci↗