arXiv subjects

Bingcheng Qing

Publications and source records attributed to Bingcheng Qing.

6 recordsLinked to original sources

arXiv2026

Flux Pumped Kerr-Free Parametric Amplifier

We propose a flux-pumped superconducting parametric amplifier based on symmetrically threaded superconducting quantum interference devices (SQUIDs) that achieves a Kerr-free operating point under suitable drive conditions. Eliminating the Kerr nonlinearity is advantageous for quantum-limited amplification, as it mitigates unwanted distortions in squeezing and prevents degradation of both gain and quantum efficiency in the high-gain strong drive regime. By replacing the central junction in the symmetrically threaded SQUIDs (STS) configuration with a linear inductor, we find that the Kerr-nonlinearity can be eliminated and the effective Hamiltonian reduces to that of a degenerate parametric amplifier (DPA), up to higher-order corrections in the zero-point fluctuations of the superconducting phase operator. We show that the deviations from ideal DPA behavior introduced by these higher-order terms are significantly weaker than those associated with a Kerr nonlinearity. Consequently, the STS design can be driven strongly while maintaining near-quantum-limited performance at the Kerr-free point. Our analysis predicts phase-preserving gain and efficiency approaching the quantum limit, with robust operation demonstrated up to 25 dB of gain.

quant-ph↗

arXiv2024

Quantum Benchmarking of High-Fidelity Noise-Biased Operations on a Detuned-Kerr-Cat Qubit

Ubiquitous noises in quantum systems remain a key obstacle to building quantum computers, necessitating the use of quantum error correction codes. Recently, error-correcting codes tailored for noise-biased systems have been shown to offer high fault-tolerance thresholds and reduced hardware overhead, positioning noise-biased qubits as promising candidates for building universal quantum computers. However, quantum operations on these platforms remain challenging, and their noise structures have not yet been rigorously benchmarked to the same extent as those of conventional quantum hardware. In this work, we develop a comprehensive quantum control toolbox for a scalable noise-biased qubit, detuned Kerr-cat qubit, including initialization, universal single-qubit gates and quantum non-demolition readout. We systematically characterize the noise structure of these operations using gate set tomography and dihedral randomized benchmarking, achieving high local gate fidelities, with $\mathcal{F}[Z(\pi/2)]=99.2\%$ and $\mathcal{F}[X(\pi/2)]=92.5\%$. Notably, the noise bias of the detuned Kerr-cat qubit approaches 250, which outperforms its resonant-Kerr-cat qubit counterparts as reported previously, representing a new state-of-the-art performance benchmark for noise-biased qubits. Moreover, our results reveal a critical overestimation of operational noise bias inferred from bit-flip and phase-flip times alone, highlighting the necessity of a precise and direct benchmarking for noise-biased qubit operations. Our work thus establishes a framework for systematically characterizing and validating the performance of quantum operations in structured-noise architectures, which lays the groundwork for implementing efficient quantum error correction in next-generation architectures.

quant-ph↗

arXiv2024

Symmetrically Threaded Superconducting Quantum Interference Devices As Next Generation Kerr-cat Qubits

We theoretically explore an alternative circuit for Kerr-cat qubits based on symmetrically threaded Superconducting Quantum Interference Devices (SQUID). The Symmetrically Threaded SQUIDs (STS) architecture employs a simplified flux-pumped design that suppresses two-photon dissipation, a dominant loss mechanism in high-Kerr regimes, by engineering the drive Hamiltonian's flux operator to generate only even-order harmonics. By fulfilling two critical criteria for practical Kerr-cat qubit operation, the STS emerges as an ideal platform: (1) a static Hamiltonian with diluted Kerr nonlinearity (achieved via the STS's middle branch) and (2) a drive Hamiltonian restricted to even harmonics, which ensures robust two-photon driving with reduced dissipation. For weak Kerr nonlinearity, we find that the coherent state lifetime ($T_\alpha$) is similar between STS and SNAIL circuits. However, STS Kerr-cat qubits exhibit enhanced resistance to higher-order photon dissipation, enabling significantly extended $T_\alpha$ even with stronger Kerr nonlinearities ($\sim$10 MHz). In contrast to SNAIL, STS Kerr-cat qubits display a $T_\alpha$ dip under weak two-photon driving for high Kerr coefficient. We demonstrate that this dip can be suppressed by applying drive-dependent detuning, enabling Kerr-cat qubit operation with only eight Josephson junctions (of energies 80 GHz); fewer junctions suffice for higher junction energies. We further validate the robustness of the STS design by studying the impact of strong flux driving and asymmetric Josephson junctions on $T_\alpha$. With the proposed design and considering a cat size of 10 photons, we predict $T_\alpha$ of the order of tens of milliseconds, even in the presence of multi-photon heating and dephasing effects.

quant-ph↗

arXiv2024

High-Coherence Kerr-cat qubit in 2D architecture

The Kerr-cat qubit is a bosonic qubit in which multi-photon Schrodinger cat states are stabilized by applying a two-photon drive to an oscillator with a Kerr nonlinearity. The suppressed bit-flip rate with increasing cat size makes this qubit a promising candidate to implement quantum error correction codes tailored for noise-biased qubits. However, achieving strong light-matter interactions necessary for stabilizing and controlling this qubit has traditionally required strong microwave drives that heat the qubit and degrade its performance. In contrast, increasing the coupling to the drive port removes the need for strong drives at the expense of large Purcell decay. By integrating an effective band-block filter on-chip, we overcome this trade-off and realize a Kerr-cat qubit in a scalable 2D superconducting circuit with high coherence. This filter provides 30 dB of isolation at the qubit frequency with negligible attenuation at the frequencies required for stabilization and readout. We experimentally demonstrate quantum non-demolition readout fidelity of 99.6% for a cat with 8 photons. Also, to have high-fidelity universal control over this qubit, we combine fast Rabi oscillations with a new demonstration of the X(90) gate through phase modulation of the stabilization drive. Finally, the lifetime in this architecture is examined as a function of the cat size of up to 10 photons in the oscillator achieving a bit-flip time higher than 1 ms and only a linear decrease in the phase-flip time, in good agreement with the theoretical analysis of the circuit. Our qubit shows promise as a building block for fault-tolerant quantum processors with a small footprint.

quant-ph↗

arXiv2023

Empowering high-dimensional quantum computing by traversing the dual bosonic ladder

High-dimensional quantum information processing has emerged as a promising avenue to transcend hardware limitations and advance the frontiers of quantum technologies. Harnessing the untapped potential of the so-called qudits necessitates the development of quantum protocols beyond the established qubit methodologies. Here, we present a robust, hardware-efficient, and extensible approach for operating multidimensional solid-state systems using Raman-assisted two-photon interactions. To demonstrate its efficacy, we construct a set of multi-qubit operations, realize highly entangled multidimensional states including atomic squeezed states and Schrödinger cat states, and implement programmable entanglement distribution along a qudit array. Our work illuminates the quantum electrodynamics of strongly driven multi-qudit systems and provides the experimental foundation for the future development of high-dimensional quantum applications.

quant-ph↗

arXiv2023

Broadband CPW-based impedance-transformed Josephson parametric amplifier

Quantum-limited Josephson parametric amplifiers play a pivotal role in advancing the field of circuit quantum electrodynamics by enabling the fast and high-fidelity measurement of weak microwave signals. Therefore, it is necessary to develop robust parametric amplifiers with low noise, broad bandwidth, and reduced design complexity for microwave detection. However, current broadband parametric amplifiers either have degraded noise performance or rely on complex designs. Here, we present a device based on the broadband impedance-transformed Josephson parametric amplifier (IMPA) that integrates a horn-like coplanar waveguide (CPW) transmission line, which significantly decreases the design and fabrication complexity, while keeping comparable performance. The device shows an instantaneous bandwidth of 700(200) MHz for 15(20) dB gain with an average saturation power of -110 dBm and near quantum-limited added noise. The operating frequency can be tuned over 1.4 GHz using an external flux bias. We further demonstrate the negligible back-action from our device on a transmon qubit. The amplification performance and simplicity of our device promise its wide adaptation in quantum metrology, quantum communication, and quantum information processing.

quant-ph↗