arXiv subjects

Binghai Yan

Publications and source records attributed to Binghai Yan.

At least 271 records · Page 15Linked to original sources

arXiv2014

Opening Band Gap without Breaking Lattice Symmetry: A New Route toward Robust Graphene-Based Nanoelectronics

Developing graphene-based nanoelectronics hinges on opening a band gap in the electronic structure of graphene, which is commonly achieved by breaking the inversion symmetry of the graphene lattice via an electric field (gate bias) or asymmetric doping of graphene layers. Here we introduce a new design strategy that places a bilayer graphene sheet sandwiched between two cladding layers of materials that possess strong spin-orbit coupling (e.g., Bi2Te3). Our ab initio and tight-binding calculations show that proximity enhanced spin-orbit coupling effect opens a large (44 meV) band gap in bilayer graphene without breaking its lattice symmetry, and the band gap can be effectively tuned by interlayer stacking pattern and significantly enhanced by interlayer compression. The feasibility of this quantum-well structure is demonstrated by recent experimental realization of high-quality heterojunctions between graphene and Bi2Te3, and this design also conforms to existing fabrication techniques in the semiconductor industry. The proposed quantum-well structure is expected to be especially robust since it does not require an external power supply to open and maintain a band gap, and the cladding layers provide protection against environmental degradation of the graphene layer in its device applications.

cond-mat.mtrl-sci↗

arXiv2013

Graphene-based topological insulator with an intrinsic bulk band gap above room temperature

Topological insulators (TIs) represent a new quantum state of matter characterized by robust gapless states inside the insulating bulk gap. The metallic edge states of a two-dimensional (2D) TI, known as quantum spin Hall (QSH) effect, are immune to backscattering and carry fully spin-polarized dissipationless currents. However, existing 2D TIs realized in HgTe and InAs/GaSb suffer from small bulk gaps (<10 meV) well below room temperature, thus limiting their application in electronic and spintronic devices. Here, we report a new 2D TI comprising a graphene layer sandwiched between two Bi2Se3 slabs that exhibits a large intrinsic bulk band gap of 30 to 50 meV, making it viable for room-temperature applications. Distinct from previous strategies for enhancing the intrinsic spin-orbit coupling effect of the graphene lattice, the present graphene-based TI operates on a new mechanism of strong inversion between graphene Dirac bands and Bi2Se3 conduction bands. Strain engineering leads to effective control and substantial enhancement of the bulk gap. Recently reported synthesis of smooth graphene/Bi2Se3 interfaces demonstrates feasibility of experimental realization of this new 2D TI structure, which holds great promise for nanoscale device applications.

cond-mat.mes-hall↗

arXiv2013

Topological superconductivity at the edge of transition metal dichalcogenides

Time-reversal breaking topological superconductors are new states of matter which can support Majorana zero modes at the edge. In this paper, we propose a new realization of one-dimensional topological superconductivity and Majorana zero modes. The proposed system consists of a monolayer of transition metal dichalcogenides MX2 (M=Mo, W; X=S, Se) on top of a superconducting substrate. Based on first-principles calculations, we show that a zigzag edge of the monolayer MX2 terminated by metal atom M has edge states with strong spin-orbit coupling and spontaneous magnetization. By proximity coupling with a superconducting substrate, topological superconductivity can be induced at such an edge. We propose NbS2 as a natural choice of substrate, and estimate the proximity induced superconducting gap based on first-principles calculation and low energy effective model. As an experimental consequence of our theory, we predict that Majorana zero modes can be detected at the 120 degree corner of a MX2 flake in proximity with a superconducting substrate.

cond-mat.mes-hall↗

arXiv2013

Lattice Instability and Competing Spin Structures in the Double Perovskite Insulator Sr2FeOsO6

The semiconductor Sr2FeOsO6, depending on temperature, adopts two types of spin structures that differ in the spin sequence of ferrimagnetic iron - osmium layers along the tetragonal c-axis. Neutron powder diffraction experiments, 57Fe Mössbauer spectra, and density-functional theory calculations suggest that this behavior arises because a lattice instability resulting in alternating iron-osmium distances fine-tunes the balance of competing exchange interactions. Thus, Sr2FeOsO6 is an example for a double perovskite, in which the electronic phases are controlled by the interplay of spin, orbital, and lattice degrees of freedom.

cond-mat.mtrl-sci↗

arXiv2013

Large-gap quantum spin Hall insulators in tin films

The search of large-gap quantum spin Hall (QSH) insulators and effective approaches to tune QSH states is important for both fundamental and practical interests. Based on first-principles calculations we find two-dimensional tin films are QSH insulators with sizable bulk gaps of 0.3 eV, sufficiently large for practical applications at room temperature. These QSH states can be effectively tuned by chemical functionalization and by external strain. The mechanism for the QSH effect in this system is band inversion at the Γpoint, similar to the case of HgTe quantum well. With surface doping of magnetic elements, the quantum anomalous Hall effect could also be realized.

cond-mat.mtrl-sci↗

arXiv2013

A large energy-gap oxide topological insulator based on the superconductor BaBiO3

Mixed-valent perovskite oxides based on BaBiO3 (BBO) are, like cuperates, well-known high-Tc superconductors. Recent ab inito calculations have assigned the high-Tc superconductivity to a correlation-enhanced electron--phonon coupling mechanism, stimulating the prediction and synthesis of new superconductor candidates among mixed-valent thallium perovskites. Existing superconductivity has meant that research has mainly focused on hole-doped compounds, leaving electron-doped compounds relatively unexplored. Here we demonstrate through ab inito calculations that BBO emerges as a topological insulator (TI) in the electron-doped region, where the spin-orbit coupling (SOC) effect is significant. BBO exhibits the largest topological energy gap of 0.7 eV among currently known TI materials, inside which Dirac-type topological surface states (TSSs) exit. As the first oxide TI, BBO is naturally stable against surface oxidization and degrading, different from chalcoginide TIs. An extra advantage of BBO lies in its ability to serve an interface between the TSSs and the superconductor for the realization of Majorana Fermions.

cond-mat.mtrl-sci↗

arXiv2013

Direct observation of band bending in topological insulator Bi2Se3

The surface band bending tunes considerably the surface band structures and transport properties in topological insulators. We present a direct measurement of the band bending on the Bi2Se3 by using the bulk sensitive angular-resolved hard x-ray photospectroscopy (HAXPES). We tracked the depth dependence of the energy shift of Bi and Se core states. We estimate that the band bending extends up to about 20 nm into the bulk with an amplitude of 0.23--0.26 eV, consistent with profiles previously deduced from the binding energies of surface states in this material.

cond-mat.mtrl-sci↗

arXiv2013

Weak topological insulators induced by the inter-layer coupling: A first-principles study of stacked Bi2TeI

Based on first-principles calculations, we predict Bi2TeI, a stoichiometric compound synthesized, to be a weak topological insulator (TI) in layered subvalent bismuth telluroiodides. Within a bulk energy gap of 80 meV, two Dirac-cone-like topological surface states exist on the side surface perpendicular to BiTeI layer plane. These Dirac cones are relatively isotropic due to the strong inter-layer coupling, distinguished from those of previously reported weak TI candidates. Moreover, with chemically stable cladding layers, the BiTeI-Bi2-BiTeI sandwiched structure is a robust quantum spin Hall system, which can be obtained by simply cleaving the bulk Bi2TeI.

cond-mat.mtrl-sci↗

arXiv2013

Synthesis, Crystal Structure and Physical Properties of Sr2FeOsO6

In the exploration of new osmium based double perovskites, Sr2FeOsO6 is a new insertion in the existing family. The polycrystalline compound has been prepared by solid state synthesis from the respective binary oxides. PXRD analysis shows the structure is pseudo-cubic at room temperature, whereas low-temperature synchrotron data refinements reveal the structure to be tetragonal, space group I4/m. Heat capacity and magnetic measurements of Sr2FeOsO6 indicated the presence of two magnetic phase transitions at T1 = 140 K and T2 = 67 K. Band structure calculations showed the compound as a narrow energy gap semiconductor, which supports the experimental results obtained from the resistivity measurements. The present study documents significant structural and electronic effects of substituting Fe3+ for Cr3+ ion in Sr2CrOsO6.

cond-mat.mtrl-sci↗

arXiv2013

Topological Hamiltonian as an Exact Tool for Topological Invariants

We propose the concept of `topological Hamiltonian' for topological insulators and superconductors in interacting systems. The eigenvalues of topological Hamiltonian are significantly different from the physical energy spectra, but we show that topological Hamiltonian contains the information of gapless surface states, therefore it is an exact tool for topological invariants.

cond-mat.str-el↗

arXiv2012

First-principles study of the structural stability of Mn3Z (Z=Ga, Sn and Ge) Heusler compounds

We investigate the structural stability and magnetic properties of cubic, tetragonal and hexagonal phases of Mn3Z (Z=Ga, Sn and Ge) Heusler compounds using first-principles density-functional theory. We propose that the cubic phase plays an important role as an intermediate state in the phase transition from the hexagonal to the tetragonal phases. Consequently, Mn3Ga and Mn3Ge behave differently from Mn3Sn, because the relative energies of the cubic and hexagonal phases are different. This result agrees with experimental observations from these three compounds. The weak ferromagnetism of the hexagonal phase and the perpendicular magnetocrystalline anisotropy of the tetragonal phase obtained in our calculations are also consistent with experiment.

cond-mat.mtrl-sci↗

arXiv2012

Topological insulators and thermoelectric materials

Topological insulators (TIs) are a new quantum state of matter which have gapless surface states inside the bulk energy gap. Starting with the discovery of two dimensional TIs, the HgTe-based quantum wells, many new topological materials have been theoretically predicted and experimentally observed. Currently known TI materials can possibly be classified into two families, the HgTe family and the Bi2Se family. The signatures found in the electronic structure of a TI also cause these materials to be excellent thermoelectric materials. On the other hand, excellent thermoelectric materials can be also topologically trivial. Here we present a short introduction to topological insulators and thermoelectrics, and give examples of compound classes were both good thermoelectric properties and topological insulators can be found.

cond-mat.mtrl-sci↗

arXiv2012

Topological surface states of Bi2Se3 with the coexistence of Se vacancies

Although topological surface states are known to be robust against non-magnetic surface perturbations, their band dispersions and spatial distributions are still sensitive to the surface defects. Take Bi2Se3 as an example, we demonstrated that Se vacancies modifies the surface band structures considerably. When large numbers of Se vacancies exist on the surface, topological surface states may sink down from the first to second quintuple layer and get separated from the vacancies. We simulated STM images to distinguish the surfaces with Se- and Bi-terminations.

cond-mat.mtrl-sci↗

arXiv2012

Prediction of weak topological insulators in layered semiconductors

We report the discovery of weak topological insulators by ab initio calculations in a honeycomb lattice. We propose a structure with an odd number of layers in the primitive unit-cell as a prerequisite for forming weak topological insulators. Here, the single-layered KHgSb is the most suitable candidate for its large bulk energy gap of 0.24 eV. Its side surface hosts metallic surface states, forming two anisotropic Dirac cones. Though the stacking of even-layered structures leads to trivial insulators, the structures can host a quantum spin Hall layer with a large bulk gap, if an additional single layer exists as a stacking fault in the crystal. The reported honeycomb compounds can serve as prototypes to aid in the finding of new weak topological insulators in layered small-gap semiconductors.

cond-mat.mtrl-sci↗

arXiv2011

Gas Doping on the Topological Insulator Bi2Se3 Surface

Gas molecule doping on the topological insulator Bi2 Se3 surface with existing Se vacancies is investigated using first-principles calculations. Consistent with experiments, NO2 and O2 are found to occupy the Se vacancy sites, remove vacancy-doped electrons and restore the band structure of a perfect surface. In contrast, NO and H2 do not favour passivation of such vacancies. Interestingly we have revealed a NO2 dissociation process that can well explain the speculative introduced "photon-doping" effect reported by recent experiments. Experimental strategies to validate this mechanism are presented. The choice and the effect of different passivators are discussed. This step paves the way for the usage of such materials in device applications utilizing robust topological surface states.

cond-mat.mes-hall↗

arXiv2011

Topological insulators in filled skutterudites

We propose new topological insulators in cerium filled skutterudite (FS) compounds based on ab initio calculations. We find that two compounds CeOs4As12 and CeOs4Sb12 are zero gap materials with band inversion between Os-d and Ce-f orbitals, which are thus parent compounds of two and three-dimensional topological insulators just like bulk HgTe. At low temperature, both compounds become topological Kondo insulators, which are Kondo insulators in the bulk, but have robust Dirac surface states on the boundary. This new family of topological insulators has two advantages compared to previous ones. First, they can have good proximity effect with other superconducting FS compounds to realize Majarona fermions. Second, the antiferromagnetism of CeOs4Sb12 at low temperature provides a way to realize the massive Dirac fermion with novel topological phenomena.

cond-mat.mtrl-sci↗

arXiv2010

Topological Insulators in Ternary Compounds with a Honeycomb Lattice

One of the most exciting subjects in solid state physics is a single layer of graphite which exhibits a variety of unconventional novel properties. The key feature of its electronic structure are linear dispersive bands which cross in a single point at the Fermi energy. This so-called Dirac cone is closely related to the surface states of the recently discovered topological insulators. The ternary compounds, such as LiAuSe and KHgSb with a honeycomb structure of their Au-Se and Hg-Sb layers feature band inversion very similar to HgTe which is a strong precondition for existence of the topological surface states. In contrast to graphene with two Dirac cones at K and K' points, these materials exhibit the surface states formed by only a single Dirac cone at the Γ-point together with the small direct band gap opened by a strong spin-orbit coupling (SOC) in the bulk. These materials are centro-symmetric, therefore, it is possible to determine the parity of their wave functions, and hence, their topological character. Surprisingly, the compound KHgSb with the strong SOC is topologically trivial, whereas LiAuSe is found to be a topological non-trivial insulator.

cond-mat.mtrl-sci↗

arXiv2010

Theoretical prediction of topological insulator in ternary rare earth chalcogenides

A new class of three-dimensional topological insulator, ternary rare earth chalcogenides, is theoretically investigated with ab initio calculations. Based on both bulk band structure analysis and the direct calculation of topological surface states, we demonstrate that LaBiTe3 is a topological insulator. La can be substituted by other rare earth elements, which provide candidates for novel topological states such as quantum anomalous Hall insulator, axionic insulator and topological Kondo insulator. Moreover, YBiTe3 and YSbTe3 are found to be normal insulators. They can be used as protecting barrier materials for both LaBiTe3 and Bi2Te3 families of topological insulators for their well matched lattice constants and chemical composition.

cond-mat.mtrl-sci↗