arXiv subjects

Birgit Kanngießer

Publications and source records attributed to Birgit Kanngießer.

5 recordsLinked to original sources

arXiv2026

In situ and operando laboratory X-ray absorption spectroscopy at high temperature and controlled gas atmosphere with a plug-flow fixed-bed cell

The capabilities of a plug-flow fixed-bed cell for operando studies of heterogeneous catalysts are demonstrated using laboratory-based X-ray absorption spectroscopy (XAS) with a von Hamos spectrometer. The cell operates at temperatures up to 1000 deg C and pressures up to 10 bar, equipped with three mass flow controllers and two infrared lamps for rapid heating under inert/reactive gas atmospheres. Proof-of-principle studies include in situ MnO oxidation in 5% Ni/MnO and operando Ni nanoparticle evolution in 20-NiO/COK-12 (20.2% NiO on SiO2) during CO2 methanation before/after activation. Within 5-15 min per spectrum, oxidation state changes are resolved while catalytic activity is simultaneously quantified by online GC. Extended datasets and methods are available in the ancillary file SI.pdf (Supplementary Information file). A shortened version of this work has been published as a Technical Note in Journal of Analytical Atomic Spectrometry (2026, 41, 1208-1211, DOI: 10.1039/D6JA00027D). This manuscript provides an extended version including additional datasets, analysis, and methodological details beyond the published article.

physics.app-ph↗

arXiv2026

Fine and Hyperfine Interactions with Multi-level Spin Relaxation of the purified Giese-Salt in Veterinary Medicine: Prussian Blue Compound Ammonium-Ferric-Hexacyano-Ferrate

Ammonium ferric hexacyanoferrate is a veterinary-medical milestone and antidote against radiocesium, well-known as Giese-salt after the Chernobyl disaster fed to domestic and wild animals, which shows even a rich interplay of properties in nanostructural chemistry and ferromagnetism. Among the broad analytical techniques, the ambivalence of macroscopic micrometer-sized agglomerates and nanoparticle sizes, a suggested enlarged Fe(II)$-$C$\equiv$N$-$Fe(III) bond length by Fe K-edge XAFS results and multi-level spin relaxation in $^{57}$Fe Mössbauer spectroscopy are highlighted. This sets this underestimated compound in a new light, e.g., for modern biomedicine and biofunctionality, extending its essential importance in addition to hypothetical future nuclear incidents

cond-mat.mtrl-sci↗

arXiv2022

In situ gas cell for the analysis of adsorption behavior on surfaces using x-ray spectroscopy

A gas cell for in-situ measurements of Volatile Organic Compounds (VOCs) and their adsorption behavior on different surfaces by means of X-Ray Fluorescence (XRF) and X-ray Absorption Fine-Structure (XAFS) spectroscopy has been developed. The cell is especially designed to allow for the efficient excitation and detection of low-Z elements such as carbon, oxygen or nitrogen as main components of VOCs. Two measurement modes are available. In the surface mode, adsorption on a surface can be studied using XAFS by fluorescence detection under shallow angles of incidence. The transmission mode enables the simultaneous investigation of gaseous samples via XAFS in transmittance and fluorescence detection modes. Proof-of-principle experiments were performed at the PTB plane grating monochromator beamline for soft x-ray radiation at the synchrotron radiation facility BESSY II. The flexible design and high versatility of the cell are demonstrated with the investigation of ethanol (EtOH) as one of the most abundant VOCs. The comparison of Near-Edge X-ray Absorption Fine-Structure (NEXAFS) spectra under transmission and fluorescence detection in the gas phase with measurements of adsorbed molecules on a Si-wafer surface both at the C and O-K absorption edges proves the applicability of the cell for the monitoring of adsorption processes.

physics.app-ph↗

arXiv2021

Laboratory grazing-incidence X-ray fluorescence spectroscopy as an analytical tool for the investigation of sub-nanometer CrSc multilayer water window optics

Efficient multilayer optics for radiation in the water window range are difficult to manufacture due to extremely small layer thicknesses and severe intermixing of elements between the layers. Therefore, adequate analytics and short feedback loops are of utmost importance for manufacturers to improve performance and efficiency. We show the possibility for non-destructive elemental depth profiling with commercial laboratory equipment using four real-life CrSc multilayer samples. Comparative measurements at the laboratory of PTB at the synchrotron radiation facility BESSY II confirm the results and prove the potential of laboratory equipment for the reliable analysis of stratified materials with sub-nanometer layer thicknesses.

physics.app-ph↗

arXiv2018

Characterization of sub-monolayer coatings as novel calibration samples for X-ray spectroscopy

With the advent of both modern X-ray fluorescence (XRF) methods and improved analytical reliability requirements the demand for suitable reference samples has increased. Especially in nanotechnology with the very low areal mass depositions, quantification becomes considerably more difficult. However, the availability of suited reference samples is drastically lower than the demand. Physical vapor deposition (PVD) techniques have been enhanced significantly in the last decade driven by the need for extremely precise film parameters in multilayer production. We have applied those techniques for the development of layer-like reference samples with mass depositions in the ng-range and well below. Several types of reference samples were fabricated: multi-elemental layer and extremely low (sub-monolayer) samples for various applications in XRF and total-reflection XRF (TXRF) analysis. Those samples were characterized and compared at three different synchrotron radiation beamlines at the BESSY II electron storage ring employing the reference-free XRF approach based on physically calibrated instrumentation. In addition, the homogeneity of the multi-elemental coatings was checked at the P04 beamline at DESY. The measurements demonstrate the high precision achieved in the manufacturing process as well as the versatility of application fields for the presented reference samples.

physics.app-ph↗