arXiv subjects

Blake R. Johnson

Publications and source records attributed to Blake R. Johnson.

At least 19 recordsLinked to original sources

arXiv2025

Real-time decoding of the gross code memory with FPGAs

We introduce a prototype FPGA decoder implementing the recently discovered Relay-BP algorithm and targeting memory experiments on the $[[144,12,12]]$ bivariate bicycle quantum low-density parity check code. The decoder is both fast and accurate, achieving a belief propagation iteration time of 24ns. It matches the logical error performance of a floating-point implementation despite using reduced precision arithmetic. This speed is sufficient for an average per cycle decoding time under $1\,\mathrm{\mu s}$ assuming circuit model error probabilities are less than $3 \times 10^{-3}$. This prototype decoder offers useful insights on the path toward decoding solutions for scalable fault-tolerant quantum computers.

quant-ph↗

arXiv2025

Improved belief propagation is sufficient for real-time decoding of quantum memory

We introduce a new heuristic decoder, Relay-BP, targeting real-time quantum circuit decoding for large-scale quantum computers. Relay-BP achieves high accuracy across circuit-noise decoding problems: significantly outperforming BP+OSD+CS-10 for bivariate-bicycle codes and comparable to min-weight-matching for surface codes. As a lightweight message-passing decoder, Relay-BP is inherently parallel, enabling rapid low-footprint decoding with FPGA or ASIC real-time implementations, similar to standard BP. A core aspect of our decoder is its enhancement of the standard BP algorithm by incorporating disordered memory strengths. This dampens oscillations and breaks symmetries that trap traditional BP algorithms. By dynamically adjusting memory strengths in a relay approach, Relay-BP can consecutively encounter multiple valid corrections to improve decoding accuracy. We observe that a problem-dependent distribution of memory strengths that includes negative values is indispensable for good performance.

quant-ph↗

arXiv2024

Quantum computing with Qiskit

We describe Qiskit, a software development kit for quantum information science. We discuss the key design decisions that have shaped its development, and examine the software architecture and its core components. We demonstrate an end-to-end workflow for solving a problem in condensed matter physics on a quantum computer that serves to highlight some of Qiskit's capabilities, for example the representation and optimization of circuits at various abstraction levels, its scalability and retargetability to new gates, and the use of quantum-classical computations via dynamic circuits. Lastly, we discuss some of the ecosystem of tools and plugins that extend Qiskit for various tasks, and the future ahead.

quant-ph↗

arXiv2022

OpenQASM 3: A broader and deeper quantum assembly language

Quantum assembly languages are machine-independent languages that traditionally describe quantum computation in the circuit model. Open quantum assembly language (OpenQASM 2) was proposed as an imperative programming language for quantum circuits based on earlier QASM dialects. In principle, any quantum computation could be described using OpenQASM 2, but there is a need to describe a broader set of circuits beyond the language of qubits and gates. By examining interactive use cases, we recognize two different timescales of quantum-classical interactions: real-time classical computations that must be performed within the coherence times of the qubits, and near-time computations with less stringent timing. Since the near-time domain is adequately described by existing programming frameworks, we choose in OpenQASM 3 to focus on the real-time domain, which must be more tightly coupled to the execution of quantum operations. We add support for arbitrary control flow as well as calling external classical functions. In addition, we recognize the need to describe circuits at multiple levels of specificity, and therefore we extend the language to include timing, pulse control, and gate modifiers. These new language features create a multi-level intermediate representation for circuit development and optimization, as well as control sequence implementation for calibration, characterization, and error mitigation.

quant-ph↗

arXiv2021

Quality, Speed, and Scale: three key attributes to measure the performance of near-term quantum computers

Defining the right metrics to properly represent the performance of a quantum computer is critical to both users and developers of a computing system. In this white paper, we identify three key attributes for quantum computing performance: quality, speed, and scale. Quality and scale are measured by quantum volume and number of qubits, respectively. We propose a speed benchmark, using an update to the quantum volume experiments that allows the measurement of Circuit Layer Operations Per Second (CLOPS) and identify how both classical and quantum components play a role in improving performance. We prescribe a procedure for measuring CLOPS and use it to characterize the performance of some IBM Quantum systems.

quant-ph↗

arXiv2021

Building a Quantum Engineering Undergraduate Program

The rapidly growing quantum information science and engineering (QISE) industry will require both quantum-aware and quantum-proficient engineers at the bachelor's level. We provide a roadmap for building a quantum engineering education program to satisfy this need. For quantum-aware engineers, we describe how to design a first quantum engineering course accessible to all STEM students. For the education and training of quantum-proficient engineers, we detail both a quantum engineering minor accessible to all STEM majors, and a quantum track directly integrated into individual engineering majors. We propose that such programs typically require only three or four newly developed courses that complement existing engineering and science classes available on most larger campuses. We describe a conceptual quantum information science course for implementation at any post-secondary institution, including community colleges and military schools. QISE presents extraordinary opportunities to work towards rectifying issues of inclusivity and equity that continue to be pervasive within engineering. We present a plan to do so and describe how quantum engineering education presents an excellent set of education research opportunities. Finally, we outline a hands-on training plan on quantum hardware, a key component of any quantum engineering program, with a variety of technologies including optics, atoms and ions, cryogenic and solid-state technologies, nanofabrication, and control and readout electronics. Our recommendations provide a flexible framework that can be tailored for academic institutions ranging from teaching and undergraduate-focused two- and four-year colleges to research-intensive universities.

physics.ed-ph↗

arXiv2019

Demonstration of a Parametrically-Activated Entangling Gate Protected from Flux Noise

In state-of-the-art quantum computing platforms, including superconducting qubits and trapped ions, imperfections in the 2-qubit entangling gates are the dominant contributions of error to system-wide performance. Recently, a novel 2-qubit parametric gate was proposed and demonstrated with superconducting transmon qubits. This gate is activated through RF modulation of the transmon frequency and can be operated at an amplitude where the performance is first-order insensitive to flux-noise. In this work we experimentally validate the existence of this AC sweet spot and demonstrate its dependence on white noise power from room temperature electronics. With these factors in place, we measure coherence-limited entangling-gate fidelities as high as 99.2 $\pm$ 0.15%.

quant-ph↗

arXiv2019

Methods for Measuring Magnetic Flux Crosstalk Between Tunable Transmons

In the gate model of quantum computing, a program is typically decomposed into a sequence of 1- and 2-qubit gates that are realized as control pulses acting on the system. A key requirement for a scalable control system is that the qubits are addressable - that control pulses act only on the targeted qubits. The presence of control crosstalk makes this addressability requirement difficult to meet. In order to provide metrics that can drive requirements for decreasing crosstalk, we present three measurements that directly quantify the DC and AC flux crosstalk present between tunable transmons, with sensitivities as fine as 0.001%. We develop the theory to connect AC flux crosstalk measures to the infidelity of a parametrically activated two-qubit gate. We employ quantum process tomography in the presence of crosstalk to provide an empirical study of the effects of crosstalk on two-qubit gate fidelity.

quant-ph↗

arXiv2019

Implementation of the XY interaction family with calibration of a single pulse

Near-term applications of quantum information processors will rely on optimized circuit implementations to minimize gate depth and therefore mitigate the impact of gate errors in noisy intermediate-scale quantum (NISQ) computers. More expressive gate sets can significantly reduce the gate depth of generic circuits. Similarly, structured algorithms can benefit from a gate set that more directly matches the symmetries of the problem. The XY interaction generates a family of gates that provides expressiveness well tailored to quantum chemistry as well as to combinatorial optimization problems, while also offering reductions in circuit depth for more generic circuits. Here we implement the full family of XY entangling gates in a transmon-based superconducting qubit architecture. We use a composite pulse scheme that requires calibration of only a single gate pulse and maintains constant gate time for all members of the family. This allows us to maintain a high fidelity implementation of the gate across all entangling angles. The average fidelity of gates sampled from this family ranges from $95.67 \pm 0.60\%$ to $99.01 \pm 0.15\%$, with a median fidelity of $97.35 \pm 0.17\%$, which approaches the coherence-limited gate fidelity of the qubit pair. We furthermore demonstrate the utility of XY in a quantum approximation optimization algorithm in enabling circuit depth reductions as compared to the CZ only case.

quant-ph↗

arXiv2019

Assessing the Influence of Broadband Instrumentation Noise on Parametrically Modulated Superconducting Qubits

With superconducting transmon qubits --- a promising platform for quantum information processing --- two-qubit gates can be performed using AC signals to modulate a tunable transmon's frequency via magnetic flux through its SQUID loop. However, frequency tunablity introduces an additional dephasing mechanism from magnetic fluctuations. In this work, we experimentally study the contribution of instrumentation noise to flux instability and the resulting error rate of parametrically activated two-qubit gates. Specifically, we measure the qubit coherence time under flux modulation while injecting broadband noise through the flux control channel. We model the noise's effect using a dephasing rate model that matches well to the measured rates, and use it to prescribe a noise floor required to achieve a desired two-qubit gate infidelity. Finally, we demonstrate that low-pass filtering the AC signal used to drive two-qubit gates between the first and second harmonic frequencies can reduce qubit sensitivity to flux noise at the AC sweet spot (ACSS), confirming an earlier theoretical prediction. The framework we present to determine instrumentation noise floors required for high entangling two-qubit gate fidelity should be extensible to other quantum information processing systems.

quant-ph↗

arXiv2019

Cross-resonance interactions between superconducting qubits with variable detuning

Cross-resonance interactions are a promising way to implement all-microwave two-qubit gates with fixed-frequency qubits. In this work, we study the dependence of the cross-resonance interaction rate on qubit-qubit detuning and compare with a model that includes the higher levels of a transmon system. To carry out this study we employ two transmon qubits--one fixed frequency and the other flux tunable--to allow us to vary the detuning between qubits. We find that the interaction closely follows a three-level model of the transmon, thus confirming the presence of an optimal regime for cross-resonance gates.

quant-ph↗

arXiv2017

Unsupervised Machine Learning on a Hybrid Quantum Computer

Machine learning techniques have led to broad adoption of a statistical model of computing. The statistical distributions natively available on quantum processors are a superset of those available classically. Harnessing this attribute has the potential to accelerate or otherwise improve machine learning relative to purely classical performance. A key challenge toward that goal is learning to hybridize classical computing resources and traditional learning techniques with the emerging capabilities of general purpose quantum processors. Here, we demonstrate such hybridization by training a 19-qubit gate model processor to solve a clustering problem, a foundational challenge in unsupervised learning. We use the quantum approximate optimization algorithm in conjunction with a gradient-free Bayesian optimization to train the quantum machine. This quantum/classical hybrid algorithm shows robustness to realistic noise, and we find evidence that classical optimization can be used to train around both coherent and incoherent imperfections.

quant-ph↗

arXiv2017

Hardware for Dynamic Quantum Computing

We describe the hardware, gateware, and software developed at Raytheon BBN Technologies for dynamic quantum information processing experiments on superconducting qubits. In dynamic experiments, real-time qubit state information is fedback or fedforward within a fraction of the qubits' coherence time to dynamically change the implemented sequence. The hardware presented here covers both control and readout of superconducting qubits. For readout we created a custom signal processing gateware and software stack on commercial hardware to convert pulses in a heterodyne receiver into qubit state assignments with minimal latency, alongside data taking capability. For control, we developed custom hardware with gateware and software for pulse sequencing and steering information distribution that is capable of arbitrary control flow on a fraction superconducting qubit coherence times. Both readout and control platforms make extensive use of FPGAs to enable tailored qubit control systems in a reconfigurable fabric suitable for iterative development.

quant-ph↗

arXiv2016

Robust Extraction of Tomographic Information via Randomized Benchmarking

We describe how randomized benchmarking can be used to reconstruct the unital part of any trace-preserving quantum map, which in turn is sufficient for the full characterization of any unitary evolution, or more generally, any unital trace-preserving evolution. This approach inherits randomized benchmarking's robustness to preparation, measurement, and gate imperfections, therefore avoiding systematic errors caused by these imperfections. We also extend these techniques to efficiently estimate the average fidelity of a quantum map to unitary maps outside of the Clifford group. The unitaries we consider correspond to large circuits commonly used as building blocks to achieve scalable, universal, and fault-tolerant quantum computation. Hence, we can efficiently verify all such subcomponents of a circuit-based universal quantum computer. In addition, we rigorously bound the time and sampling complexities of randomized benchmarking procedures, proving that the required non-linear estimation problem can be solved efficiently.

quant-ph↗

arXiv2015

Demonstration of quantum advantage in machine learning

The main promise of quantum computing is to efficiently solve certain problems that are prohibitively expensive for a classical computer. Most problems with a proven quantum advantage involve the repeated use of a black box, or oracle, whose structure encodes the solution. One measure of the algorithmic performance is the query complexity, i.e., the scaling of the number of oracle calls needed to find the solution with a given probability. Few-qubit demonstrations of quantum algorithms, such as Deutsch-Jozsa and Grover, have been implemented across diverse physical systems such as nuclear magnetic resonance, trapped ions, optical systems, and superconducting circuits. However, at the small scale, these problems can already be solved classically with a few oracle queries, and the attainable quantum advantage is modest. Here we solve an oracle-based problem, known as learning parity with noise, using a five-qubit superconducting processor. Running classical and quantum algorithms on the same oracle, we observe a large gap in query count in favor of quantum processing. We find that this gap grows by orders of magnitude as a function of the error rates and the problem size. This result demonstrates that, while complex fault-tolerant architectures will be required for universal quantum computing, a quantum advantage already emerges in existing noisy systems

quant-ph↗

arXiv2015

Demonstration of Robust Quantum Gate Tomography via Randomized Benchmarking

Typical quantum gate tomography protocols struggle with a self-consistency problem: the gate operation cannot be reconstructed without knowledge of the initial state and final measurement, but such knowledge cannot be obtained without well-characterized gates. A recently proposed technique, known as randomized benchmarking tomography (RBT), sidesteps this self-consistency problem by designing experiments to be insensitive to preparation and measurement imperfections. We implement this proposal in a superconducting qubit system, using a number of experimental improvements including implementing each of the elements of the Clifford group in single `atomic' pulses and custom control hardware to enable large overhead protocols. We show a robust reconstruction of several single-qubit quantum gates, including a unitary outside the Clifford group. We demonstrate that RBT yields physical gate reconstructions that are consistent with fidelities obtained by randomized benchmarking.

quant-ph↗

arXiv2013

Tomography via Correlation of Noisy Measurement Records

We present methods and results of shot-by-shot correlation of noisy measurements to extract entangled state and process tomography in a superconducting qubit architecture. We show that averaging continuous values, rather than counting discrete thresholded values, is a valid tomographic strategy and is in fact the better choice in the low signal-to-noise regime. We show that the effort to measure $N$-body correlations from individual measurements scales exponentially with $N$, but with sufficient signal-to-noise the approach remains viable for few-body correlations. We provide a new protocol to optimally account for the transient behavior of pulsed measurements. Despite single-shot measurement fidelity that is less than perfect, we demonstrate appropriate processing to extract and verify entangled states and processes.

quant-ph↗

arXiv2011

Coherence in a transmon qubit with epitaxial tunnel junctions

We developed transmon qubits based on epitaxial tunnel junctions and interdigitated capacitors. This multileveled qubit, patterned by use of all-optical lithography, is a step towards scalable qubits with a high integration density. The relaxation time T1 is .72-.86mu sec and the ensemble dephasing time T2 is slightly larger than T1. The dephasing time T2 (1.36mu sec) is nearly energy-relaxation-limited. Qubit spectroscopy yields weaker level splitting than observed in qubits with amorphous barriers in equivalent-size junctions. The qubit's inferred microwave loss closely matches the weighted losses of the individual elements (junction, wiring dielectric, and interdigitated capacitor), determined by independent resonator measurements.

cond-mat.supr-con↗