arXiv subjects

Bo Ai

Publications and source records attributed to Bo Ai.

At least 91 records · Page 5Linked to original sources

arXiv2025

Two-Phase Channel Estimation for RIS-Assisted THz Systems with Beam Split

Reconfigurable intelligent surface (RIS)-assisted terahertz (THz) communication is emerging as a key technology to support ultra-high data rates in future sixth-generation networks. However, the acquisition of accurate channel state information (CSI) in such systems is challenging due to the passive nature of RIS and the hybrid beamforming architecture typically employed in THz systems. To address these challenges, we propose a novel low-complexity two-phase channel estimation scheme for RIS-assisted THz systems with beam split effect. In the proposed scheme, we first estimate the full CSI over a small subset of subcarriers, then extract angular information at both the base station and RIS. Subsequently, we recover the full CSI across remaining subcarriers by determining the corresponding spatial directions and angle-excluded coefficients. Theoretical analysis and simulation results demonstrate that the proposed method achieves superior performance in terms of normalized mean-square error while significantly reducing computational complexity compared to existing algorithms.

cs.IT↗

arXiv2025

Channel Estimation for Rydberg Atomic Receivers

The rapid development of the quantum technology presents huge opportunities for 6G communications. Leveraging the quantum properties of highly excited Rydberg atoms, Rydberg atom-based antennas present distinct advantages, such as high sensitivity, broad frequency range, and compact size, over traditional antennas. To realize efficient precoding, accurate channel state information is essential. However, due to the distinct characteristics of atomic receivers, traditional channel estimation algorithms developed for conventional receivers are no longer applicable. To this end, we propose a novel channel estimation algorithm based on projection gradient descent (PGD), which is applicable to both one-dimensional (1D) and twodimensional (2D) arrays. Simulation results are provided to show the effectiveness of our proposed channel estimation method.

cs.IT↗

arXiv2025

Multi-Waveguide Pinching Antennas for ISAC

Recently, a novel flexible-antenna technology, called pinching antennas, has attracted growing academic interest. By inserting discrete dielectric materials, pinching antennas can be activated at arbitrary points along waveguides, allowing for flexible customization of large-scale path loss. This paper investigates a multi-waveguide pinching-antenna integrated sensing and communications (ISAC) system, where transmit pinching antennas (TPAs) and receive pinching antennas (RPAs) coordinate to simultaneously detect one potential target and serve one downlink user. We formulate a communication rate maximization problem subject to radar signal-to-noise ratio (SNR) requirement, transmit power budget, and the allowable movement region of the TPAs, by jointly optimizing TPA locations and transmit beamforming design. To address the non-convexity of the problem, we propose a novel fine-tuning approximation method to reformulate it into a tractable form, followed by a successive convex approximation (SCA)-based algorithm to obtain the solution efficiently. Extensive simulations validate both the system design and the proposed algorithm. Results show that the proposed method achieves near-optimal performance compared with the computational-intensive exhaustive search-based benchmark, and pinching-antenna ISAC systems exhibit a distinct communication-sensing trade-off compared with conventional systems.

cs.IT↗

arXiv2025

6G-Enabled Smart Railways

Smart railways integrate advanced information technologies into railway operating systems to improve efficiency and reliability. Although the development of 5G has enhanced railway services, future smart railways require ultra-high speeds, ultra-low latency, ultra-high security, full coverage, and ultra-high positioning accuracy, which 5G cannot fully meet. Therefore, 6G is envisioned to provide green and efficient all-day operations, strong information security, fully automatic driving, and low-cost intelligent maintenance. To achieve these requirements, we propose an integrated network architecture leveraging communications, computing, edge intelligence, and caching in railway systems. We have conducted in-depth investigations on key enabling technologies for reliable transmissions and wireless coverage. For high-speed mobile scenarios, we propose an AI-enabled cross-domain channel modeling and orthogonal time-frequency space-time spread multiple access mechanism to alleviate the conflict between limited spectrum availability and massive user access. The roles of blockchain, edge intelligence, and privacy technologies in endogenously secure rail communications are also evaluated. We further explore the application of emerging paradigms such as integrated sensing and communications, AI-assisted Internet of Things, semantic communications, and digital twin networks for railway maintenance, monitoring, prediction, and accident warning. Finally, possible future research and development directions are discussed.

eess.SY↗

arXiv2025

ROMA: ROtary and Movable Antenna

The rotary and movable antenna (ROMA) architecture represents a next-generation multi-antenna technology that enables flexible adjustment of antenna position and array rotation angles of the transceiver. In this letter, we propose a ROMA-aided multi-user MIMO communication system to fully enhance the efficiency and reliability of system transmissions. By deploying ROMA panels at both the transmitter and receiver sides, and jointly optimizing the three-dimensional (3D) rotation angles of each ROMA panel and the relative positions of antenna elements based on the spatial distribution of users and channel state information (CSI), we can achieve the objective of maximizing the average spectral efficiency (SE). Subsequently, we conduct a detailed analysis of the average SE performance of the system under the consideration of maximum ratio (MR) precoding. Due to the non-convexity of the optimization problem in the ROMA multi-user MIMO system, we propose an efficient solution based on an alternating optimization (AO) algorithm. Finally, simulation results demonstrate that the AO-based ROMA architecture can significantly improve the average SE. Furthermore, the performance improvement becomes more pronounced as the size of the movable region and the transmission power increase.

eess.SP↗

arXiv2025

Energy-Efficient SIM-assisted Communications: How Many Layers Do We Need?

The stacked intelligent metasurface (SIM), comprising multiple layers of reconfigurable transmissive metasurfaces, is becoming an increasingly viable solution for future wireless communication systems. In this paper, we explore the integration of SIM in a multi-antenna base station for application to downlink multi-user communications, and a realistic power consumption model for SIM-assisted systems is presented. Specifically, we focus on maximizing the energy efficiency (EE) for hybrid precoding design, i.e., the base station digital precoding and SIM wave-based beamforming. Due to the non-convexity and high complexity of the formulated problem, we employ the quadratic transformation method to reformulate the optimization problem and propose an alternating optimization (AO)-based joint precoding framework. Specifically, a successive convex approximation (SCA) algorithm is adopted for the base station precoding design. For the SIM wave-based beamforming, two algorithms are employed: the high-performance semidefinite programming (SDP) method and the low-complexity projected gradient ascent (PGA) algorithm. In particular, the results indicate that while the optimal number of SIM layers for maximizing the EE and spectral efficiency differs, a design of 2 to 5 layers can achieve satisfactory performance for both. Finally, numerical results are illustrated to evaluate the effectiveness of the proposed hybrid precoding framework and to showcase the performance enhancement achieved by the algorithm in comparison to benchmark schemes.

cs.IT↗

arXiv2025

Uplink Assisted Joint Channel Estimation and CSI Feedback: An Approach Based on Deep Joint Source-Channel Coding

In frequency division duplex (FDD) multiple-input multiple-output (MIMO) wireless communication systems, the acquisition of downlink channel state information (CSI) is essential for maximizing spatial resource utilization and improving system spectral efficiency. The separate design of modules in AI-based CSI feedback architectures under traditional modular communication frameworks, including channel estimation (CE), CSI compression and feedback, leads to sub-optimal performance. In this paper, we propose an uplink assisted joint CE and and CSI feedback approach via deep learning for downlink CSI acquisition, which mitigates performance degradation caused by distribution bias across separately trained modules in traditional modular communication frameworks. The proposed network adopts a deep joint source-channel coding (DJSCC) architecture to mitigate the cliff effect encountered in the conventional separate source-channel coding. Furthermore, we exploit the uplink CSI as auxiliary information to enhance CSI reconstruction accuracy by leveraging the partial reciprocity between the uplink and downlink channels in FDD systems, without introducing additional overhead. The effectiveness of uplink CSI as assisted information and the necessity of an end-toend multi-module joint training architecture is validated through comprehensive ablation and scalability experiments.

eess.SP↗

arXiv2025

White-Box AI Model: Next Frontier of Wireless Communications

White-box AI (WAI), or explainable AI (XAI) model, a novel tool to achieve the reasoning behind decisions and predictions made by the AI algorithms, makes it more understandable and transparent. It offers a new approach to address key challenges of interpretability and mathematical validation in traditional black-box models. In this paper, WAI-aided wireless communication systems are proposed and investigated thoroughly to utilize the promising capabilities. First, we introduce the fundamental principles of WAI. Then, a detailed comparison between WAI and traditional black-box model is conducted in terms of optimization objectives and architecture design, with a focus on deep neural networks (DNNs) and transformer networks. Furthermore, in contrast to the traditional black-box methods, WAI leverages theory-driven causal modeling and verifiable optimization paths, thereby demonstrating potential advantages in areas such as signal processing and resource allocation. Finally, we outline future research directions for the integration of WAI in wireless communication systems.

cs.IT↗

arXiv2025

Hierarchy-Aware and Channel-Adaptive Semantic Communication for Bandwidth-Limited Data Fusion

Obtaining high-resolution hyperspectral images (HR-HSI) is costly and data-intensive, making it necessary to fuse low-resolution hyperspectral images (LR-HSI) with high-resolution RGB images (HR-RGB) for practical applications. However, traditional fusion techniques, which integrate detailed information into the reconstruction, significantly increase bandwidth consumption compared to directly transmitting raw data. To overcome these challenges, we propose a hierarchy-aware and channel-adaptive semantic communication approach for bandwidth-limited data fusion. A hierarchical correlation module is proposed to preserve both the overall structural information and the details of the image required for super-resolution. This module efficiently combines deep semantic and shallow features from LR-HSI and HR-RGB. To further reduce bandwidth usage while preserving reconstruction quality, a channel-adaptive attention mechanism based on Transformer is proposed to dynamically integrate and transmit the deep and shallow features, enabling efficient data transmission and high-quality HR-HSI reconstruction. Experimental results on the CAVE and Washington DC Mall datasets demonstrate that our method outperforms single-source transmission, achieving up to a 2 dB improvement in peak signal-to-noise ratio (PSNR). Additionally, it reduces bandwidth consumption by two-thirds, confirming its effectiveness in bandwidth-constrained environments for HR-HSI reconstruction tasks.

eess.IV↗

arXiv2025

Movable Cell-Free Massive MIMO For High-Speed Train Communications: A PPO-Based Antenna Position Optimization

In recent years, high-speed trains (HSTs) communications have developed rapidly to enhance the stability of train operations and improve passenger connectivity experiences. However, as the train continues to accelerate, urgent technological innovations are needed to overcome challenges such as frequency handover and significant Doppler effects. In this paper, we present a novel architecture featuring movable antennas (MAs) to fully exploit macro spatial diversity, enabling a cell-free (CF) massive multiple-input multiple-output (MIMO) system that supports high-speed train communications. Considering the high likelihood of line-of-sight (LoS) transmission in HST scenario, we derive the uplink spectral efficiency (SE) expression for the movable CF massive MIMO system. Moreover, an optimization problem is formulated to maximize the sum SE of the considered system by optimizing the positions of the antennas. Since the formulated problem is non-convex and highly non-linear, we improve a deep reinforcement learning algorithm to address it by using proximal policy optimization (PPO). Different from traditional optimization approaches, which optimize variables separately and alternately, our improved PPO-based approach optimizes all the variables in unison. Simulation results demonstrate that movable CF massive MIMO effectively suppresses the negative impact of the Doppler effect in HST communications.

eess.SP↗

arXiv2025

Channel Semantic Characterization for Integrated Sensing and Communication Scenarios: From Measurements to Modeling

With the advancement of sixth-generation (6G) wireless communication systems, integrated sensing and communication (ISAC) is crucial for perceiving and interacting with the environment via electromagnetic propagation, termed channel semantics, to support tasks like decision-making. However, channel models focusing on physical characteristics face challenges in representing semantics embedded in the channel, thereby limiting the evaluation of ISAC systems. To tackle this, we present a novel framework for channel modeling from the conceptual event perspective. By leveraging a multi-level semantic structure and characterized knowledge libraries, the framework decomposes complex channel characteristics into extensible semantic characterization, thereby better capturing the relationship between environment and channel, and enabling more flexible adjustments of channel models for different events without requiring a complete reset. Specifically, we define channel semantics on three levels: status semantics, behavior semantics, and event semantics, corresponding to channel multipaths, channel time-varying trajectories, and channel topology, respectively. Taking realistic vehicular ISAC scenarios as an example, we perform semantic clustering, characterizing status semantics via multipath statistical distributions, modeling behavior semantics using Markov chains for time variation, and representing event semantics through a co-occurrence matrix. Results show the model accurately generates channels while capturing rich semantic information. Moreover, its generalization supports customized semantics.

eess.SP↗

arXiv2025

A CGAN-LSTM-Based Framework for Time-Varying Non-Stationary Channel Modeling

Time-varying non-stationary channels, with complex dynamic variations and temporal evolution characteristics, have significant challenges in channel modeling and communication system performance evaluation. Most existing methods of time-varying channel modeling focus on predicting channel state at a given moment or simulating short-term channel fluctuations, which are unable to capture the long-term evolution of the channel. This paper emphasizes the generation of long-term dynamic channel to fully capture evolution of non-stationary channel properties. The generated channel not only reflects temporal dynamics but also ensures consistent stationarity. We propose a hybrid deep learning framework that combines conditional generative adversarial networks (CGAN) with long short-term memory (LSTM) networks. A stationarity-constrained approach is designed to ensure temporal correlation of the generated time-series channel. This method can generate channel with required temporal non-stationarity. The model is validated by comparing channel statistical features, and the results show that the generated channel is in good agreement with raw channel and provides good performance in terms of non-stationarity.

eess.SP↗

arXiv2025

Optimal Bilinear Equalizer for Cell-Free Massive MIMO Systems over Correlated Rician Channels

In this paper, we explore the low-complexity optimal bilinear equalizer (OBE) combining scheme design for cell-free massive multiple-input multiple-output networks with spatially correlated Rician fading channels. We provide a spectral efficiency (SE) performance analysis framework for both the centralized and distributed processing schemes with bilinear equalizer (BE)-structure combining schemes applied. The BE-structured combining is a set of schemes that are constructed by the multiplications of channel statistics-based BE matrices and instantaneous channel estimates. Notably, we derive closed-form achievable SE expressions for centralized and distributed BE-structured combining schemes. We propose one centralized and two distributed OBE schemes: Centralized OBE (C-OBE), Distributed OBE based on Global channel statistics (DG-OBE), and Distributed OBE based on Local channel statistics (DL-OBE), which maximize their respective SE expressions. OBE matrices in these schemes are tailored based on varying levels of channel statistics. Notably, we obtain new and insightful closed-form results for the C-OBE, DG-OBE, and DL-OBE combining schemes. Numerical results demonstrate that the proposed OBE schemes can achieve excellent SE, even in scenarios with severe pilot contamination.

eess.SP↗

arXiv2025

Optimal Bilinear Equalizer Beamforming Design for Cell-Free Massive MIMO Networks with Arbitrary Channel Estimators

This paper studies the distributed optimal bilinear equalizer (OBE) beamforming design for both the uplink and downlink cell-free massive multiple-input multiple-output networks. We consider arbitrary statistics-based channel estimators over spatially correlated Rician fading channels. In the uplink, we derive the achievable spectral efficiency (SE) performance and OBE combining schemes with arbitrary statistics-based channel estimators and compute their respective closed-form expressions. It is insightful to explore that the achievable SE performance is not dependent on the choice of channel estimator when OBE combining schemes are applied over Rayleigh channels. In the downlink, we derive the achievable SE performance expressions with BE precoding schemes and arbitrary statistics-based channel estimators utilized and compute them in closed form. Then, we obtain the OBE precoding scheme leveraging insights from uplink OBE combining schemes.

cs.IT↗

arXiv2025

Analytical Framework for Effective Degrees of Freedom in Near-Field XL-MIMO

Extremely large-scale multiple-input-multiple-output (XL-MIMO) is an emerging transceiver technology for enabling next-generation communication systems, due to its potential for substantial enhancement in both the spectral efficiency and spatial resolution. However, the achievable performance limits of various promising XL-MIMO configurations have yet to be fully evaluated, compared, and discussed. In this paper, we develop an effective degrees of freedom (EDoF) performance analysis framework specifically tailored for near-field XL-MIMO systems. We explore five representative distinct XL-MIMO hardware designs, including uniform planar array (UPA)-based with infinitely thin dipoles, two-dimensional (2D) continuous aperture (CAP) plane-based, UPA-based with patch antennas, uniform linear array (ULA)-based, and one-dimensional (1D) CAP line segment-based XL-MIMO systems. Our analysis encompasses two near-field channel models: the scalar and dyadic Green's function-based channel models. More importantly, when applying the scalar Green's function-based channel, we derive EDoF expressions in the closed-form, characterizing the impacts of the physical size of the transceiver, the transmitting distance, and the carrier frequency. In our numerical results, we evaluate and compare the EDoF performance across all examined XL-MIMO designs, confirming the accuracy of our proposed closed-form expressions. Furthermore, we observe that with an increasing number of antennas, the EDoF performance for both UPA-based and ULA-based systems approaches that of 2D CAP plane and 1D CAP line segment-based systems, respectively. Moreover, we unveil that the EDoF performance for near-field XL-MIMO systems is predominantly determined by the array aperture size rather than the sheer number of antennas.

cs.IT↗

arXiv2025

Joint Power Allocation and Phase Shift Design for Stacked Intelligent Metasurfaces-aided Cell-Free Massive MIMO Systems with MARL

Cell-free (CF) massive multiple-input multiple-output (mMIMO) systems offer high spectral efficiency (SE) through multiple distributed access points (APs). However, the large number of antennas increases power consumption. We propose incorporating stacked intelligent metasurfaces (SIM) into CF mMIMO systems as a cost-effective, energy-efficient solution. This paper focuses on optimizing the joint power allocation of APs and the phase shift of SIMs to maximize the sum SE. To address this complex problem, we introduce a fully distributed multi-agent reinforcement learning (MARL) algorithm. Our novel algorithm, the noisy value method with a recurrent policy in multi-agent policy optimization (NVR-MAPPO), enhances performance by encouraging diverse exploration under centralized training and decentralized execution. Simulations demonstrate that NVR-MAPPO significantly improves sum SE and robustness across various scenarios.

cs.IT↗

arXiv2025

Robust Multidimensional Graph Neural Networks for Signal Processing in Wireless Communications with Edge-Graph Information Bottleneck

Signal processing is crucial for satisfying the high data rate requirements of future sixth-generation (6G) wireless networks. However, the rapid growth of wireless networks has brought about massive data traffic, which hinders the application of traditional optimization theory-based algorithms. Meanwhile, traditional graph neural networks (GNNs) focus on compressing inputs onto vertices to update representations, which often leads to their inability to effectively distinguish input features and severely weakens performance. In this context, designing efficient signal processing frameworks becomes imperative. Moreover, actual scenarios are susceptible to multipath interference and noise, resulting in specific differences between the received and actual information. To address these challenges, this paper incorporates multidimensional graph neural networks (MDGNNs) with edge-graph information bottleneck (EGIB) to design a robust framework for signal processing. Specifically, MDGNNs utilize hyper-edges instead of vertices to update representations to avoid indistinguishable features and reduce information loss, while EGIB encourages providing minimal sufficient information about outputs to avoid aggregation of irrelevant information. We numerically demonstrate that compared with existing frameworks, the proposed frameworks achieve excellent performance in terms of spectrum efficiency (SE) and network overhead under multiple signal processing tasks. Remarkably, as the interference noise increases, the SE performance of the proposed frameworks gradually stabilizes. This reveals the proposed frameworks have excellent robustness in interference prone environments, especially in wireless policies related to channel matrices.

eess.SP↗

arXiv2025

VideoQA-SC: Adaptive Semantic Communication for Video Question Answering

Although semantic communication (SC) has shown its potential in efficiently transmitting multimodal data such as texts, speeches and images, SC for videos has focused primarily on pixel-level reconstruction. However, these SC systems may be suboptimal for downstream intelligent tasks. Moreover, SC systems without pixel-level video reconstruction present advantages by achieving higher bandwidth efficiency and real-time performance of various intelligent tasks. The difficulty in such system design lies in the extraction of task-related compact semantic representations and their accurate delivery over noisy channels. In this paper, we propose an end-to-end SC system, named VideoQA-SC for video question answering (VideoQA) tasks. Our goal is to accomplish VideoQA tasks directly based on video semantics over noisy or fading wireless channels, bypassing the need for video reconstruction at the receiver. To this end, we develop a spatiotemporal semantic encoder for effective video semantic extraction, and a learning-based bandwidth-adaptive deep joint source-channel coding (DJSCC) scheme for efficient and robust video semantic transmission. Experiments demonstrate that VideoQA-SC outperforms traditional and advanced DJSCC-based SC systems that rely on video reconstruction at the receiver under a wide range of channel conditions and bandwidth constraints. In particular, when the signal-to-noise ratio is low, VideoQA-SC can improve the answer accuracy by 5.17% while saving almost 99.5\% of the bandwidth at the same time, compared with the advanced DJSCC-based SC system. Our results show the great potential of SC system design for video applications.

cs.CV↗