Searcharxiv⌕ Search

arXiv subjects

Bo Gao

Publications and source records attributed to Bo Gao.

At least 91 records · Page 5Linked to original sources

Model-based Learning Network for 3-D Localization in mmWave Communications

This study considers the joint location and velocity estimation of UE and scatterers in a three-dimensional mmWave CRAN architecture. Several existing works have achieved satisfactory results with neural networks (NNs) for localization. However, the black box NN localization method has limited performance and relies on a prohibitive amount of training data. Thus, we propose a model-based learning network for localization by combining NNs with geometric models. Specifically, we first develop an unbiased WLS estimator by utilizing hybrid delay/angular measurements, which determine the location and velocity of the UE in only one estimator, and can obtain the location and velocity of scatterers further. The proposed estimator can achieve the CRLB and outperforms state-of-the-art methods. Second, we establish a NN-assisted localization method (NN-WLS) by replacing the linear approximations in the proposed WLS localization model with NNs to learn higher-order error components, thereby enhancing the performance of the estimator. The solution possesses the powerful learning ability of the NN and the robustness of the proposed geometric model. Moreover, the ensemble learning is applied to improve the localization accuracy further. Comprehensive simulations show that the proposed NN-WLS is superior to the benchmark methods in terms of localization accuracy, robustness, and required time resources.

cs.IT↗

Optoelectronic characteristics and application of black phosphorus and its analogs

The tunable bandgap from 0.3 eV to 2 eV of black phosphorus (BP) makes it to fill the gap in graphene. When studying the properties of BP more comprehensive, scientists have discovered that many two-dimensional materials, such as tellurene, antimonene, bismuthene, indium selenide and tin sulfide, have similar structures and properties to black phosphorus thus called black phosphorus analogs. In this review, we briefly introduce preparation methods of black phosphorus and its analogs, with emphasis on the method of mechanical exfoliation (ME), liquid phase exfoliation (LPE) and chemical vapor deposition (CVD). And their characterization and properties according to their classification of single-element materials and multi-element materials are described. We focus on the performance of passively mode-locked fiber lasers using BP and its analogs as saturable absorbers (SA) and demonstrated this part through classification of working wavelength. Finally, we introduce the application of BP and its analogs, and discuss their future research prospects.

physics.optics↗

Tunable Doping of Rhenium and Vanadium into Transition Metal Dichalcogenides for Two-Dimensional Electronics

Two-dimensional (2D) transition metal dichalcogenides (TMDCs) with unique electrical properties are fascinating materials used for future electronics. However, the strong Fermi level pinning effect at the interface of TMDCs and metal electrodes always leads to high contact resistance, which seriously hinders their application in 2D electronics. One effective way to overcome this is to use metallic TMDCs or transferred metal electrodes as van der Waals (vdW) contacts. Alternatively, using highly conductive doped TMDCs will have a profound impact on the contact engineering of 2D electronics. Here, a novel chemical vapor deposition using mixed molten salts is established for vapor-liquid-solid growth of high-quality rhenium (Re) and vanadium (V)-doped TMDC monolayers with high controllability and reproducibility. A tunable semiconductor to metal transition is observed in the Re and V-doped TMDCs. Electrical conductivity increases up to a factor of 108 in the degenerate V-doped WS2 and WSe2. Using V-doped WSe2 as vdW contact, the on-state current and on/off ratio of WSe2-based field-effect transistors have been substantially improved (from ~10-8 to 10-5 A; ~104 to 108), compared to metal contacts. Future studies on lateral contacts and interconnects using doped TMDCs will pave the way for 2D integrated circuits and flexible electronics.

cond-mat.mtrl-sci↗

Integrated Communication and Localization in mmWave Systems

As the fifth-generation (5G) mobile communication system is being commercialized, extensive studies on the evolution of 5G and sixth-generation mobile communication systems have been conducted. Future mobile communication systems are evidently evolving towards a more intelligent and software-reconfigurable functionality paradigm that can provide ubiquitous communication and also sense, control, and optimize wireless environments. Thus, integrating communication and localization by utilizing the highly directional transmission characteristics of millimeter-wave (mmWave) is a promising route. This approach not only expands the localization capabilities of a communication system but also provides new concepts and opportunities to enhance communication. In this paper, we explain the integrated communication and localization in mmWave systems, in which these processes share the same set of hardware architecture and algorithm. We also perform an overview of the key enabling technologies and the basic knowledge on localization. Then, we provide two promising directions for studies on localization with extremely large antenna array and model-based neural networks. We also discuss a comprehensive guidance for location-assisted mmWave communications in terms of channel estimation, channel state information feedback, beam tracking, synchronization, interference control, resource allocation, and user selection. Finally, this paper outlines the future trends on the mutual assistance and enhancement of communication and localization in integrated systems.

eess.SP↗

Multichannel quantum-defect theory for anisotropic interactions

We present a general formulation of multichannel quantum-defect theory (MQDT) for anisotropic long-range potentials. The theory unifies the treatment of atomic and molecular interactions of all types, and greatly expands the set of interactions that can be treated and understood systematically, including complex interactions involving molecules. In one exemplary manifestation, the theory provides a methodology to make the classification of atomic interactions based on the Periodic Table quantitative, instead of qualitative, and to generalize the Table to include molecular classes. Through the concept of effective potential, the theory further establishes a foundation for new classes of quantum theories for chemistry and for a broad range of quantum systems made of either a few or many atoms and/or molecules.

physics.atom-ph↗

Pressure-induced Topological and Structural Phase Transitions in an Antiferromagnetic Topological Insulator

Recently, natural van der Waals heterostructures of (MnBi2Te4)m(Bi2Te3)n have been theoretically predicted and experimentally shown to host tunable magnetic properties and topologically nontrivial surface states. In this work, we systematically investigate both the structural and electronic responses of MnBi2Te4 and MnBi4Te7 to external pressure. In addition to the suppression of antiferromagnetic order, MnBi2Te4 is found to undergo a metal-semiconductor-metal transition upon compression. The resistivity of MnBi4Te7 changes dramatically under high pressure and a non-monotonic evolution of \r{ho}(T) is observed. The nontrivial topology is proved to persists before the structural phase transition observed in the high-pressure regime. We find that the bulk and surface states respond differently to pressure, which is consistent with the non-monotonic change of the resistivity. Interestingly, a pressure-induced amorphous state is observed in MnBi2Te4, while two high pressure phase transitions are revealed in MnBi4Te7. Our combined theoretical and experimental research establishes MnBi2Te4 and MnBi4Te7 as highly tunable magnetic topological insulators, in which phase transitions and new ground states emerge upon compression.

cond-mat.supr-con↗

Multichannel interactions of two atoms in an optical tweezer

The multichannel Na-Cs interactions are characterized by a series of measurements using two atoms in an optical tweezer, along with a multichannel quantum defect theory (MQDT). The triplet and singlet scattering lengths are measured by performing Raman spectroscopy of the Na-Cs motional states and least-bound molecular state in the tweezer. Magnetic Feshbach resonances are observed for only two atoms at fields which agree well with the MQDT. Our methodology, which promotes the idea of an effective theory of interaction, can be a key step towards the understanding and the description of more complex interactions. The tweezer-based measurements in particular will be an important tool for atom-molecule and molecule-molecule interactions, where high densities are experimentally challenging and where the interactions can be dominated by intra-species processes.

physics.atom-ph↗

Prediction and realization of a temperature control limit at low temperatures in SPRIGT

On May 20th 2019, the World Metrology Day, the Bureau International des Poids et Mesures announced a major revision to the four more SI units. The base unit, the kelvin, is defined by fixing the value of Boltzmann constant as indicated in Mise en pratique for the definition of the kelvin in the SI. To realize the new kelvin, a novel practical realization technique of single-pressure refractive-index gas thermometry (SPRIGT) has been jointly developed by the TIPC-CAS in China and the LNE-Cnam in France. To carry out accurate SPRIGT, experimental methods have been implemented and micro-kelvin level temperature control limits have been predicted and achieved at 5 K to 26 K. The resonator temperature stability can be maintained to within better than 8 μK of its set point with an integration time 33.6 s over 180 h. Besides, solutions for further improving the stability were also demonstrated, which can be a reference for temperature metrology field worldwide and other fields where high-stability temperature is required. The present work should also provide a solid foundation for international data comparison of thermodynamic temperature at low temperatures, and will promote realizations of the new kelvin and the spread of high-accuracy, low-temperature metrology.

physics.ins-det↗

Realization of ppm level pressure stability for primary thermometry using a primary piston gauge

To achieve an uncertainty of 0.25 mK in single-pressure refractive-index gas thermometry (SPRIGT), the relative pressure variation of He-4 gas in the range 30 kPa to 90 kPa, should not exceed 4 ppm (k=1). To this end, a novel pressure control system has been developed. It consists of two main parts: a piston gauge to control the pressure, and a home-made gas compensation system to supplement the micro-leak of the piston gauge. In addition, to maintain the piston at constant height, a servo loop is used that automatically determines in real time the amount of extra gas required. At room temperature, the standard deviations of the stabilized pressure are 3.0 mPa at 30 kPa, 4.5 mPa at 60 kPa and 2 mPa at 90 kPa. For the temperature region 5 K-25 K used for SPRIGT in the present work, the relative pressure stability is better than 0.16 ppm i.e. 25 times better than required. Moreover, the same pressure stabilization system is readily transposable to other primary gas thermometers.

physics.ins-det↗

Active suppression of temperature oscillation from a pulse-tube cryocooler in a cryogen-free cryostat: Part 2. Experimental realization

A cryogen-free cryostat cooled by a closed cycle cryocooler is compact, can provide uninterrupted long-term operation (up to ten thousand hours) and is suited to temperatures from 3 K to 300 K. Its intrinsic temperature oscillation, however, limits its application in experiments requiring high thermal stability at low temperature (below 77 K). Passive suppression methods are effective but all suffer from drawbacks. We describe a novel, active suppression scheme more efficient than traditional proportional-integral (PI) control. The experimental results show that it can reduce the standard deviation of the temperature oscillation by a further 30% compared with PI feedback. To the best of our knowledge, this is the first time such active suppression of temperature oscillations has been implemented with the cryogen-free cryostat. The results also show, however, that an unwanted lower frequency thermal noise will be generated, which appears to be the limit of the method. Nevertheless, the approach could be used to improve the temperature stability in all cryogen-free cryostats.

physics.ins-det↗

Active suppression of temperature oscillation from a pulse-tube cryocooler in a cryogen-free cryostat: Part 1. Simulation modeling from thermal response characteristics

A cryogen-free cryostat cooled using a 4 K commercial GM or pulse tube cryocooler (PTC) displays temperature oscillations caused by the intrinsic working principle of the regenerative cryocooler. To dampen such oscillations usually requires either a large heat capacity or a large thermal resistance. To understand this phenomenon better and suppress it more effectively, both the step response characteristic and the intrinsic oscillation characteristic of cryostat have been used to obtain the complete transfer functions of a simulation model. The latter is used to test and optimize traditional PID feedback control. The results showed this approach has almost no effect on the temperature oscillation amplitude. Based on this simulation model, a novel active method was proposed and tested numerically. Simulation results predict the method should suppress the amplitude of the original temperature oscillation by a factor of two.

physics.ins-det↗

Resonance frequency measurement with accuracy and stability at the 10-12 level in a copper microwave cavity below 26 K by experimental optimization

Single pressure refractive index gas thermometry (SPRIGT) is a novel primary thermometry, jointly developed by TIPC of CAS in China and LNE-Cnam in France. To realize a competitive uncertainty of 0.25 mK for thermodynamic temperature measurements, high-stability and low-uncertainty of microwave resonance frequency measurements better than 2 ppb should be achieved. This article describes how to realize high-stability and low-uncertainty of resonance frequency measurements in a copper microwave cavity by experimental optimization methods based on Allan analysis of variance. In this manner, 10-12 level accuracy and stability of microwave resonance frequency measurements were realized with an integration time of 3 hours, which is nearly 20 times better than those without optimization in our previous work (Sci. Bull 2019; 64: 286-288). It has potential applications in gas metrology and other research fields, where high-stability and low-uncertainty microwave measurements are necessary. Besides, microwave measurements were carried out isobarically at pressures of (30, 60, 90, and 120) kPa over the temperature range of (5 to 26) K, with good microwave mode consistency for the determined thermodynamic temperatures. These will provide strong support for the success of the implementation of SPRIGT in China.

physics.ins-det↗

Precise tuning of the superconducting properties of Mn-doped Al films for transition edge sensors by ion-implantation

Magnetic impurities in metallic superconductors are important for both fundamental and applied sciences. In this study, we focused on dilute Mn-doped aluminum (AlMn) films, which are common superconducting materials used to make transition edge sensors (TES). We developed a multi-energy ion-implantation technique to make AlMn films. Compared with frequently used sputtering techniques, ion-implantation provides more precise and reliable control of the Mn doping concentration in the AlMn films.The ion implantation also enables us to quantitatively analyze the superconducting transition temperature curve as a function of the Mn doping concentration. We found that Mn dopants act as magnetic impurities and suppression of superconductivity is counteracted by the antiferromagnetic Ruderman Kittel Kasuya Yosida interaction among Mn dopants. The RKKY interaction can be tuned through defect engineering in the ion-implantation process and through post-implantation annealing.

cond-mat.mtrl-sci↗

sCompile: Critical Path Identification and Analysis for Smart Contracts

Ethereum smart contracts are an innovation built on top of the blockchain technology, which provides a platform for automatically executing contracts in an anonymous, distributed, and trusted way. The problem is magnified by the fact that smart contracts, unlike ordinary programs, cannot be patched easily once deployed. It is important for smart contracts to be checked against potential vulnerabilities. In this work, we propose an alternative approach to automatically identify critical program paths (with multiple function calls including inter-contract function calls) in a smart contract, rank the paths according to their criticalness, discard them if they are infeasible or otherwise present them with user friendly warnings for user inspection. We identify paths which involve monetary transaction as critical paths, and prioritize those which potentially violate important properties. For scalability, symbolic execution techniques are only applied to top ranked critical paths. Our approach has been implemented in a tool called sCompile, which has been applied to 36,099 smart contracts. The experiment results show that sCompile is efficient, i.e., 5 seconds on average for one smart contract. Furthermore, we show that many known vulnerabilities can be captured if user inspects as few as 10 program paths generated by sCompile. Lastly, sCompile discovered 224 unknown vulnerabilities with a false positive rate of 15.4% before user inspection.

cs.CR↗

Anisotropic Charge Carrier and Coherent Acoustic Phonon Dynamics of Black Phosphorus Studied by Transient Absorption Microscopy

Due to its corrugated hexagonal lattice structure, Black phosphorus (BP) has unique anisotropic physical properties, which provides an additional freedom for designing devices. Many body interactions, including interactions with phonon, is crucial for heat dissipation and charge carrier mobility in device. However, the rich properties of the coherent acoustic phonon, including anisotropy, propagation and generation were not fully interrogated. In this paper, the polarization-resolved transient absorption microscopy was conducted on BP flakes to study the dynamics of photoexcited charge carriers and coherent acoustic phonon. Polarization-resolved transient absorption images and traces were recorded and showed anisotropic and thickness-dependent charge carriers decay dynamics. The damping of the coherent acoustic phonon oscillation was found to be anisotropic, which was attributed to the polarization-dependent absorption length of the probe pulse. From the analysis of initial oscillation amplitude and phase of coherent acoustic phonon oscillation, we proposed that the direct deformation potential mechanism dominated the generation of coherent acoustic phonons in our experiment. Besides, we obtained the sound velocity of the coherent acoustic phonon from the oscillation frequency and the acoustic echo, respectively, which agreed well with each other. These findings provide significant insights into the rich acoustic phonon properties of BP, and promise important application for BP in polarization-sensitive optical and optoelectronic devices.

physics.chem-ph↗

A Facile Method for Precise Layer Number Identification of Two-Dimensional Materials through Optical Images

Optical microscopy is believed to be an efficient method for identifying layer number of two-dimensional 2D materials. However, since illuminants, cameras and their parameters are different from lab to lab, it is impossible to identify layer numbers just by comparing a given optical image with standard or calculated images under standard conditions. Here we reported an image reconstruction method, converting raw optical images acquired by arbitrary illuminants and cameras into reconstructed images at specified illuminant and specified camera. After image reconstruction, the color differences of each layer number roughly equaled those calculated under specified condition. By comparing the color differences in reconstructed image with those calculated under specified condition, the layer numbers of 2D materials in our lab and published papers, including MoS2, WS2 and WSe2, were ambiguously identified. This study makes optical microscopy a precise method for identifying layer numbers of 2D materials on known substrate.

cond-mat.mtrl-sci↗

Quenched asymptotics for a 1-d stochastic heat equation driven by a rough spatial noise

In this note we consider the parabolic Anderson model in one dimension with time-independent fractional noise $\dot{W}$ in space. We consider the case $H<\frac{1}{2}$ and get existence and uniqueness of solution. In order to find the quenched asymptotics for the solution we consider its Feynman-Kac representation and explore the asymptotics of the principal eigenvalue for a random operator of the form $\frac{1}{2} Δ+ \dot{W}$.

math.PR↗

Diffusion-controlled Alloying of Single-phase Multi-principal Covalent Transition Metal Carbides with Enhanced Damage tolerance and Exceptional Thermal Properties

Multicomponent alloying has displayed extraordinary potential for producing exceptional structural and functional materials. However, the synthesis of single-phase, multi-principal covalent compounds remains a challenge. Here we present a diffusion-controlled alloying strategy for the successful realization of covalent multi-principal transition metal carbides (MPTMCs) with a single face-centered cubic (FCC) phase. The increased interfacial diffusion promoted by the addition of a nonstoichiometric compound leads to rapid formation of the new single phase at much lower sintering temperature. Direct atomic-level observations via scanning transmission electron microscopy demonstrate that MPTMCs are composed of a single phase with a random distribution of all cations, which holds the key to the unique combinations of improved fracture toughness, superior Vickers hardness, and extremely lower thermal diffusivity achieved in MPTMCs. The present discovery provides a promising approach toward the design and synthesis of next-generation high-performance materials.

cond-mat.mtrl-sci↗