arXiv subjects

Bo Hu

Publications and source records attributed to Bo Hu.

At least 145 records · Page 8Linked to original sources

arXiv2016

Modeling QoE of Video Streaming in Wireless Networks with Large-Scale Measurement of User Behavior

Unraveling quality of experience (QoE) of video streaming is very challenging in bandwidth shared wireless networks. It is unclear how QoE metrics such as starvation probability and buffering time interact with dynamics of streaming traffic load. In this paper, we collect view records from one of the largest streaming providers in China over two weeks and perform an in-depth measurement study on flow arrival and viewing time that shed light on the real traffic pattern. Our most important observation is that the viewing time of streaming users fits a hyper-exponential distribution quite well. This implies that all the views can be categorized into two classes, short and long views with separated time scales. We then map the measured traffic pattern to bandwidth shared cellular networks and propose an analytical framework to compute the closed-form starvation probability on the basis of ordinary differential equations (ODEs). Our framework can be naturally extended to investigate practical issues including the progressive downloading and the finite video duration. Extensive trace-driven simulations validate the accuracy of our models. Our study reveals that the starvation metrics of the short and long views possess different sensitivities to the scheduling priority at base station. Hence, a better QoE tradeoff between the short and long views has a potential to be leveraged by offering them different scheduling weights. The flow differentiation involves tremendous technical and non-technical challenges because video content is owned by content providers but not the network operators and the viewing time of each session is unknown beforehand. To overcome these difficulties, we propose an online Bayesian approach to infer the viewing time of each incoming flow with the "least" information from content providers.

cs.NI↗

arXiv2014

Lepton Mixing, Residual Symmetries, and Trigonometric Diophantine Equations

In this paper, we study residual symmetries in the lepton sector. Our first concern is the symmetry of the charged lepton mass matrix in the basis where the Majorana neutrino mass matrix is diagonal, which is strongly constrained by the requirement that the symmetry group generated by residual symmetries is finite. In a recent work R. M. Fonseca and W. Grimus found that there exists a set of constraint equations that can be completely solved, which is essential in their approach to the classification of lepton mixing matrices that are fully determined by residual symmetries. In this paper, a method to handle trigonometric Diophantine equations is introduced. We will show that the constraint equations found by Fonseca and Grimus can also be solved by this method. Detailed derivation and discussion will be presented in a self-contained way. In addition, we will also show that, in the case where residual symmetries satisfy a reality condition, this method can be used to solve the equation constraining parameters in the symmetry assignment that controls the group structure generated by residual symmetries and is directly related to mixing matrix elements.

hep-ph↗

arXiv2014

Determination of subject-specific muscle fatigue rates under static fatiguing operations

Cumulative local muscle fatigue may lead to potential musculoskeletal disorder (MSD) risks {\color{red}, and subject-specific muscle fatigability needs to be considered to reduce potential MSD risks.} This study was conducted to determine local muscle fatigue rate at shoulder joint level based on an exponential function derived from a muscle fatigue model. Forty male subjects participated in a fatiguing operation under a static posture with a range of relative force levels (14% - 33%). Remaining maximum muscle strengths were measured after different fatiguing sessions. The time course of strength decline was fitted to the exponential function. Subject-specific fatigue rates of shoulder joint moment strength were determined. Good correspondence ($R^2>0.8$) was found in the regression of the majority (35 out of 40 subjects). Substantial inter-individual variability in fatigue rate was found and discussed.

cs.RO↗

arXiv2013

Neutrino Mixing and Discrete Symmetries

In this paper we discuss a new way to derive neutrino mixing patterns, which originates from the idea proposed in a recent article by Hernandez and Smirnov. Its applications to various cases are discussed. We first present the complete set of possible mixing patterns for the minimal case where unbroken residual symmetries of the Majorana neutrino and left-handed charged-lepton mass matrices obey some general assumptions that are also satisfied by many models based on discrete symmetries. We find that they are either well-known mixing patterns or phenomenologically disfavored ones. It shows clearly that, for full-mixing matrices to fit the mixing data with small or negligible corrections, it is necessary to go beyond the minimal scenario. We present an explicit formalism for a rather general nonminimal case. Some applications and phenomenological implications are discussed. Several new mixing patterns are derived.

hep-ph↗

arXiv2013

Trimaximal-Cabibbo neutrino mixing: A parametrization in terms of deviations from tri-bimaximal mixing

In this paper we study a parametrized description of neutrino mixing from a phenomenological point of view. We concentrate on the parametrization in terms of higher order corrections to the leading order mixing matrix. A method to describe subleading contributions and its applications to tri-bimaximal mixing are discussed. We show that mixing matrices similar to tri-bimaximal-Cabibbo mixing can be obtained by straightforward choices of parameters. To achieve better agreement with the experimental data without increasing the number of free parameters, we impose a simple phenomenological relation from which a trimaximal-like mixing matrix, parametrized by U_{e3} = sinθ_{13} e^{-i φ}, can be derived straightforwardly without imposing additional requirements. It can describe the current global fit to three-neutrino mixing with good accuracy. Its theoretical explanation and phenomenological applications are discussed briefly.

hep-ph↗

arXiv2012

How input fluctuations reshape the dynamics of a biological switching system

An important task in quantitative biology is to understand the role of stochasticity in biochemical regulation. Here, as an extension of our recent work [Phys. Rev. Lett. 107, 148101 (2011)], we study how input fluctuations affect the stochastic dynamics of a simple biological switch. In our model, the on transition rate of the switch is directly regulated by a noisy input signal, which is described as a nonnegative mean-reverting diffusion process. This continuous process can be a good approximation of the discrete birth-death process and is much more analytically tractable. Within this new setup, we apply the Feynman-Kac theorem to investigate the statistical features of the output switching dynamics. Consistent with our previous findings, the input noise is found to effectively suppress the input-dependent transitions. We show analytically that this effect becomes significant when the input signal fluctuates greatly in amplitude and reverts slowly to its mean.

q-bio.MN↗

arXiv2011

Constructing a Galactic coordinate system based on near-infrared and radio catalogs

The definition of the Galactic coordinate system was announced by the IAU Sub-Commission 33b on behalf of the IAU in 1958. For more than 50 years the definition of the Galactic coordinate system has remained unchanged from this IAU1958 version. On the basis of deep and all-sky catalogs, the position of the Galactic plane can be revised and updated definitions of the Galactic coordinate systems can be proposed. We re-determine the position of the Galactic plane based on modern large catalogs, such as the Two Micron All-Sky Survey (2MASS) and the SPECFIND v2.0. This paper also aims to propose a possible definition of the optimal Galactic coordinate system by adopting the ICRS position of the Sgr A* at the Galactic center. The near-infrared 2MASS point source catalog and the SPECFIND v2.0 catalog of radio continuum spectra are used to determine the mean position of the Galactic plane on the celestial sphere. By fitting the data to an ideal Galactic equator, the parameters defining the Galactic coordinate system are obtained. We find that the obliquity of the Galactic equator on the ICRS principal plane is about $0.4^\circ$ (2MASS) and $0.6^\circ$ (SPECFIND v2.0) larger than the J2000.0 value, which is widely used in coordinate transformations between the equatorial $(α, δ)$ and the Galactic $(\ell, b)$. Depending on the adopted parameters, data, and methods, the largest difference between the resulting Galactic coordinate systems is several arcminutes. We derive revised transformation matrices and parameters describing the orientation of the Galactic coordinate systems in the ICRS at the 1 milli-arcsecond level to match the precision of modern observations. For practical applications, we propose that a revised definition of the Galactic coordinate system should be required in the near future.

astro-ph.GA↗

arXiv2011

Can virtual reality predict body part discomfort and performance of people in realistic world for assembling tasks?

This paper presents our work on relationship of evaluation results between virtual environment (VE) and realistic environment (RE) for assembling tasks. Evaluation results consist of subjective results (BPD and RPE) and objective results (posture and physical performance). Same tasks were performed with same experimental configurations and evaluation results were measured in RE and VE respectively. Then these evaluation results were compared. Slight difference of posture between VE and RE was found but not great difference of effect on people according to conventional ergonomics posture assessment method. Correlation of BPD and performance results between VE and RE are found by linear regression method. Moreover, results of BPD, physical performance, and RPE in VE are higher than that in RE with significant difference. Furthermore, these results indicates that subjects feel more discomfort and fatigue in VE than RE because of additional effort required in VE.

cs.RO↗

arXiv2011

A novel approach for determining fatigue resistances of different muscle groups in static cases

In ergonomics and biomechanics, muscle fatigue models based on maximum endurance time (MET) models are often used to integrate fatigue effect into ergonomic and biomechanical application. However, due to the empirical principle of those MET models, the disadvantages of this method are: 1) the MET models cannot reveal the muscle physiology background very well; 2) there is no general formation for those MET models to predict MET. In this paper, a theoretical MET model is extended from a simple muscle fatigue model with consideration of the external load and maximum voluntary contraction in passive static exertion cases. The universal availability of the extended MET model is analyzed in comparison to 24 existing empirical MET models. Using mathematical regression method, 21 of the 24 MET models have intraclass correlations over 0.9, which means the extended MET model could replace the existing MET models in a general and computationally efficient way. In addition, an important parameter, fatigability (or fatigue resistance) of different muscle groups, could be calculated via the mathematical regression approach. Its mean value and its standard deviation are useful for predicting MET values of a given population during static operations. The possible reasons influencing the fatigue resistance were classified and discussed, and it is still a very challenging work to find out the quantitative relationship between the fatigue resistance and the influencing factors.

cs.RO↗

arXiv2010

Integrating digital human modeling into virtual environment for ergonomic oriented design

Virtual human simulation integrated into virtual reality applications is mainly used for virtual representation of the user in virtual environment or for interactions between the user and the virtual avatar for cognitive tasks. In this paper, in order to prevent musculoskeletal disorders, the integration of virtual human simulation and VR application is presented to facilitate physical ergonomic evaluation, especially for physical fatigue evaluation of a given population. Immersive working environments are created to avoid expensive physical mock-up in conventional evaluation methods. Peripheral motion capture systems are used to capture natural movements and then to simulate the physical operations in virtual human simulation. Physical aspects of human's movement are then analyzed to determine the effort level of each key joint using inverse kinematics. The physical fatigue level of each joint is further analyzed by integrating a fatigue and recovery model on the basis of physical task parameters. All the process has been realized based on VRHIT platform and a case study is presented to demonstrate the function of the physical fatigue for a given population and its usefulness for worker selection.

cs.RO↗

arXiv2010

Fatigue evaluation in maintenance and assembly operations by digital human simulation

Virtual human techniques have been used a lot in industrial design in order to consider human factors and ergonomics as early as possible. The physical status (the physical capacity of virtual human) has been mostly treated as invariable in the current available human simulation tools, while indeed the physical capacity varies along time in an operation and the change of the physical capacity depends on the history of the work as well. Virtual Human Status is proposed in this paper in order to assess the difficulty of manual handling operations, especially from the physical perspective. The decrease of the physical capacity before and after an operation is used as an index to indicate the work difficulty. The reduction of physical strength is simulated in a theoretical approach on the basis of a fatigue model in which fatigue resistances of different muscle groups were regressed from 24 existing maximum endurance time (MET) models. A framework based on digital human modeling technique is established to realize the comparison of physical status. An assembly case in airplane assembly is simulated and analyzed under the framework. The endurance time and the decrease of the joint moment strengths are simulated. The experimental result in simulated operations under laboratory conditions confirms the feasibility of the theoretical approach.

cs.RO↗

arXiv2010

Determining the accuracy of spatial gradient sensing using statistical mechanics

Many eukaryotic cells are able to sense chemical gradients by directly measuring spatial concentration differences. The precision of such gradient sensing is limited by fluctuations in the binding of diffusing particles to specific receptors on the cell surface. Here, we explore the physical limits of the spatial sensing mechanism by modeling the chemotactic cell as an Ising spin chain subject to a spatially varying field. This allows us to derive the maximum likelihood estimators of the gradient parameters as well as explicit expressions for their asymptotic uncertainties. The accuracy increases with the cell's size and our results demonstrate that this accuracy be further increased by introducing a non-zero cooperativity between neighboring receptors. Thus, consistent with recent experimental data, it is possible for small bacteria to perform spatial measurements of gradients.

q-bio.CB↗

arXiv2009

Coupling of higher-mode-light into a single sliver nanowire

Coupling of higher-order-mode light into a single sliver nanowire and the degree of the coupling can be controlled by adjusting the light polarization, showing that nanowire waveguide has no request on the spatial mode of the input light. Photons with different orbital angular momentums (OAM) are used to excite surface plasmons of silver nanowires. The experiment indicates the propagating modes of surface plasmons in nanowires were not the OAM eignenstates.

physics.optics↗

arXiv2006

Z_3 Symmetry and Neutrino Mixing in Type II Seesaw

Neutrino mixing matrix satisfying the current experimental data can be well described by the HPS tri-bimaximal mixing matrix. We propose that its origin can be understood within the seesaw framework by a hidden condition on the mass matrix of heavy right-handed neutrinos under the transformation of the Abelian finite group Z_3 on the flavor basis. Ignoring CP phases, we show that it can lead to the generic form of the effective light neutrino mass matrix from which the HPS mixing matrix appears naturally, as well as an expeimentally allowed non-zero \sinθ_{13}. We show that the model based on our proposal is in good agreement with the current experimental data.

hep-ph↗

arXiv2006

$B_s - \bar B_s$ Mixing and Its Implication for $b \to s$ Transitions in Supersymmetry

We investigate the effect of the current measurement of the neutral $B_s$ meson mass difference, $ΔM_{B_s}$, on SUGRA models which have non-zero values of the soft breaking terms $(m^2_{LL,RR})_{23}$ and $A^{u,d}_{23}$ at the GUT scale. We use non-zero values of these parameter to explain the $B\to Kπ$ puzzle and find that even after satisfying the experimental result on $ΔM_{B_s}$ and the branching ratio (BR) of $b\to sγ$ we still can explain the puzzle. Further we show that in this parameter space it is possible to accommodate the large BR of $B\to η' K$ and the current experimental data for CP asymmetries of $B\to η' K^0$ and $B\to ϕK^0$. The predicted value of $\sin (2β^{\rm eff})_{η' K^0}$ is about $0.52-0.67$.

hep-ph↗

arXiv2006

Modified dispersion relations and black hole physics

A modified formulation of energy-momentum relation is proposed in the context of doubly special relativity. We investigate its impact on black hole physics. It turns out that such modification will give corrections to both the temperature and the entropy of black holes. In particular this modified dispersion relation also changes the picture of Hawking radiation greatly when the size of black holes approaching the Planck scale. It can prevent black holes from total evaporation, as a result providing a plausible mechanism to treat the remnant of black holes as a candidate for dark matter.

gr-qc↗

arXiv2006

Quantum inequalities for massless spin-3/2 field in Minkowski spacetime

Quantum inequalities have been established for various quantum fields in both flat and curved spacetimes. In particular, for spin-3/2 fields, Yu and Wu have explicitly derived quantum inequalities for massive case. Employing the similar method developed by Fewster and colleagues, this paper provides an explicit formula of quantum inequalities for massless spin-3/2 field in four-dimensional Minkowski spacetime.

gr-qc↗

arXiv2006

Interacting dark energy, holographic principle and coincidence problem

The interacting and holographic dark energy models involve two important quantities. One is the characteristic size of the holographic bound and the other is the coupling term of the interaction between dark energy and dark matter. Rather than fixing either of them, we present a detailed study of theoretical relationships among these quantities and cosmological parameters as well as observational constraints in a very general formalism. In particular, we argue that the ratio of dark matter to dark energy density depends on the choice of these two quantities, thus providing a mechanism to change the evolution history of the ratio from that in standard cosmology such that the coincidence problem may be solved. We investigate this problem in detail and construct explicit models to demonstrate that it may be alleviated provided that the interacting term and the characteristic size of holographic bound are appropriately specified. Furthermore, these models are well fitted with the current observation at least in the low red-shift region.

hep-th↗