arXiv subjects

Bohayra Mortazavi

Publications and source records attributed to Bohayra Mortazavi.

64 records · Page 4Linked to original sources

arXiv2017

Flat borophene films as anode materials for Mg, Na or Li-ion batteries with ultra high capacities: A first-principles study

Most recent exciting experimental advances introduced buckled and flat borophene nanomembranes as new members to the advancing family of two-dimensional (2D) materials. Borophene, is the boron atom analogue of graphene with interesting properties suitable for a wide variety of applications. In this investigation, we conducted extensive first-principles density functional theory simulations to explore the application of four different flat borophene films as anode materials for Al, Mg, Na or Li-ion batteries. In our modelling, first the strongest binding sites were predicted and next we gradually increased the adatoms coverage until the maximum capacity was reached. Bader charge analysis was employed to evaluate the charge transfer between the adatoms and the borophene films. Nudged elastic band method was also utilized to probe the ions diffusions. We calculated the average atom adsorption energies and open-circuit voltage profiles as a function of adatoms coverage. Our findings propose the flat borophene films as electrically conductive and thermally stable anode materials with ultra high capacities of 2480 mAh/g, 1640 mAh/g and 2040 mAh/g for Mg, Na or Li-ion batteries, respectively, which distinctly outperform not only the buckled borophene but also all other 2D materials. Our study may provide useful viewpoint with respect to the possible application of flat borophene films for the design of high capacity and light weight advanced rechargeable ion batteries.

physics.comp-ph↗

arXiv2017

Ultra high stiffness and thermal conductivity of graphene like C3N

Recently, single crystalline carbon nitride 2D material with a C3N stoichiometry has been synthesized. In this investigation, we explored the mechanical response and thermal transport along pristine, free-standing and single-layer C3N. To this aim, we conducted extensive first-principles density functional theory (DFT) calculations as well as molecular dynamics (MD) simulations. DFT results reveal that C3N nanofilms can yield remarkably high elastic modulus of 341 GPa.nm and tensile strength of 35 GPa.nm, very close to those of defect-free graphene. Classical MD simulations performed at a low temperature, predict accurately the elastic modulus of 2D C3N with less than 3% difference with the first-principles estimation. The deformation process of C3N nanosheets was studied both by the DFT and MD simulations. Ab initio molecular dynamics simulations show that single-layer C3N can withstand high temperatures like 4000 K. Notably, the phononic thermal conductivity of free-standing C3N was predicted to be as high as 815 W/mK. Our atomistic modelling results reveal ultra high stiffness and thermal conductivity of C3N nanomembranes and therefore propose them as promising candidates for new application such as the thermal management in nanoelectronics or simultaneously reinforcing the thermal and mechanical properties of polymeric materials.

physics.comp-ph↗

arXiv2017

Thermal and electronic transport characteristics of highly stretchable graphene kirigami

For centuries, cutting and folding the papers with special patterns have been used to build beautiful, flexible and complex three-dimensional structures. Inspired by the old idea of kirigami (paper cutting), and the outstanding properties of graphene, recently graphene kirigami structures were fabricated to enhance the stretchability of graphene. However, the possibility of further tuning the electronic and thermal transport along the 2D kirigami structures have remained original to investigate. We therefore performed extensive atomistic simulations to explore the electronic, heat and load transfer along various graphene kirigami structures. The mechanical response and thermal transport were explored using classical molecular dynamics simulations. We then used a real-space Kubo-Greenwood formalism to investigate the charge transport characteristics in graphene kirigami. Our results reveal that graphene kirigami structures present highly anisotropic thermal and electrical transport. Interestingly, we show the possibility of tuning the thermal conductivity of graphene by four orders of magnitude. Moreover, we discuss the engineering of kirigami patterns to further enhance their stretchability by more than 10 times as compared with pristine graphene. Our study not only provides a general understanding concerning the engineering of electronic, thermal and mechanical response of graphene but more importantly can be useful to guide future studies with respect to the synthesis of other 2D material kirigami structures, to reach highly flexible and stretchable nanostructures with finely tunable electronic and thermal properties.

cond-mat.mes-hall↗

arXiv2017

Thermal Conductivity and Mechanical Properties of Nitrogenated Holey Graphene

Nitrogenated holey graphene (NHG), a two-dimensional graphene-derived material with a C2N stoichiometry and evenly distributed holes and nitrogen atoms in its basal plane, has recently been synthesized. We performed first principles calculations and molecular dynamics simulations to investigate mechanical and heat transport properties of this novel two-dimensional material at various temperatures. First principles calculations based on density functional theory yield an elastic modulus of 400 +/- 5 GPa at 0 K, 10% larger than predicted by molecular dynamics simulations at low temperatures. We observed an overall decreasing trend in elastic modulus and tensile strength as temperature increases. At room temperature, we found that NHG can present a remarkable elastic modulus of 335 +/- 5 GPa and tensile strength of 60 GPa. We also investigated the thermal conductivity of NHG via non-equilibrium molecular dynamics simulations. At 300 K an intrinsic thermal conductivity of 64.8 W/m-K was found, with an effective phonon mean free path of 34.0 nm, both of which are smaller than respective values for graphene, and decrease with temperature. Our modeling-based predictions should serve as guide to experiments concerning physical properties of this novel material.

cond-mat.mtrl-sci↗

arXiv2017

Anisotropic thermal conductivity and mechanical properties of phagraphene: A molecular dynamics study

Phagraphene is a novel 2D carbon allotrope with interesting electronic properties which has been recently theoretically proposed. Phagraphene is similar to a defective graphene structure with an arrangement of pentagonal, heptagonal and hexagonal rings. In this study we investigate thermal conductivity and mechanical properties of phagraphene using molecular dynamics simulations. Using the non-equilibrium molecular dynamics method, we found the thermal conductivity of phagraphene to be anisotropic, with room temperature values of $218 \pm 20$ W/m-K along the armchair direction and $285 \pm 29$ W/m-K along the zigzag direction. Both values are one order of magnitude smaller than pristine graphene. Analysis of phonon group velocities also shows a significant reduction in this quantity for phagraphene in comparison to graphene. By performing uniaxial tensile simulations, we studied the deformation process and mechanical response of phagraphene. We found that phagraphene exhibits a remarkable high tensile strength around $85 \pm 2$ GPa, whereas its elastic modulus is also anisotropic along in-plane directions, with values of $870 \pm 15$ GPa and $800 \pm 14$ GPa for armchair and zigzag directions respectively. The lower thermal conductivity of phagraphene along with its predicted electronic properties suggests that it could be a better candidate than graphene in future carbon-based thermoelectric devices.

cond-mat.mtrl-sci↗

arXiv2017

A first-principles study on the effect of oxygen content on the structural and electronic properties of silicon suboxide as anode material for Lithium Ion Batteries

Silicon suboxide is currently considered as a unique candidate for lithium ion batteries anode materials due to its considerable capacity. However, no adequate information exist about the role of oxygen content on its performance. To this aim, we used density functional theory to create silicon suboxide matrices of various Si:O ratios and investigated the role of oxygen content on the structural, dynamic, electronic properties and lithiation behavior of the matrices. Our study demonstrates that the O atoms interact strongly with the inserted Li atoms resulting in a disintegration of the host matrix. We found that higher concentration of oxygen atoms in the mixture reduces its relative expansion upon lithiation, which is a desirable quality for anode materials. It helps in preventing crack formation and pulverization due to large fluctuations in volume. Our study also demonstrate that a higher oxygen content increases the lithium storage capacity of the anode. However, it can also cause the formation of stable complexes like lithium silicates that might result into reversible capacity loss as indicated by the voltage-composition curves. The study provides valuable insights into the role of oxygen in moderating the interaction of lithium in silicon suboxide mixture in microscopic details.

cond-mat.mtrl-sci↗

arXiv2017

Metamorphosis in Carbon Network: From Penta-Graphene to Biphenylene under Uniaxial Tension

The power of polymorphism in carbon is vividly manifested by the numerous applications of carbon-based nano-materials. Ranging from environmental issues to biomedical applications, it has the potential to address many of today's dire problems. However, an understanding of the mechanism of transformation between carbon allotropes at a microscopic level is crucial for its development into highly desirable materials. In this work we report such a phase transformation between two carbon allotropes, from penta-graphene (a semiconductor) into biphenylene (a metal) under uniaxial loading. Using density functional theory we demonstrated that the phase transformation occurs through a synchronized reorganization of the carbon atoms with a simultaneous drop in energy. The results of this work confirms that penta-graphene is a meta-stable structure. On the other hand, a rigorous analysis of biphenylene suggests that it is an energetically, mechanically, dynamically and thermally stable structure, both in the form of a sheet and a tube. Its electronic structure suggests that it is metallic in both these forms. Therefore, this work unravels the possibility of phase transition in 2-D carbon systems and thereby designing nano-materials capable of altering their properties in an instant. Furthermore, heating biphenylene sheet at a high temperature (5000K) revealed another phase transformation into a more stable hexa-graphene like structure. This proposes thermal annealing as a possible method of synthesizing one 2-D carbon allotrope from another.

cond-mat.mtrl-sci↗

arXiv2017

A Structural Insight into Mechanical Strength of Graphene-like Carbon and Carbon Nitride Networks

Graphene, one of the strongest materials ever discovered, triggered the exploration of many 2D materials in the last decade. However, the successful synthesis of a stable nanomaterial requires a rudimentary understanding of the relationship between its structure and strength. In the present study, we investigate the mechanical properties of 8 different carbon-based 2D nanomaterials by performing extensive density functional theory calculations. The considered structures were just recently either experimentally synthesized or theoretically predicted. The corresponding stress-strain curves and elastic moduli are reported. They can be useful in training force field parameters for large scale simulations. A comparative analysis of these results revealed a direct relationship between atomic density per area and elastic modulus. Furthermore, for the networks that have an armchair and a zigzag orientation, we observed that they were more stretchable in the zigzag direction than the armchair direction. A critical analysis of the angular distributions and radial distribution functions suggested that it could be due to the higher ability of the networks to suppress the elongations of the bonds in the zigzag direction by deforming the bond angles. The structural interpretations provided in this work not only improve the general understanding of a 2D material's strength but also enables us to rationally design them for higher qualities.

cond-mat.mtrl-sci↗

arXiv2017

Strong thermal transport along polycrystalline transition metal dichalcogenides revealed by multiscale modelling for MoS2

Transition metal dichalcogenides (TMDs) represent a large family of high-quality 2D materials with attractive electronic, thermal, chemical, and mechanical properties. Chemical vapour deposition (CVD) technique is currently the most reliable route to synthesis few-atomic layer thick and large-scale TMDs films. However, the effects of grain boundaries formed during the CVD method on the properties of TMDs nanomembranes have remained less explored. In this study, we therefore aim to investigate the thermal conduction along polycrystalline molybdenum disulfide (MoS2) as the representative member of TMDs nanomembranes family. This goal was achieved by developing a combined atomistic-continuum multiscale method. In the proposed approach, reactive molecular dynamics simulations were carried out to assess thermal contact conductance of diverse grain boundaries with various defects configurations. The effective thermal conductivity along the CVD grown polycrystalline and single-layer MoS2 was finally acquired by conducting finite element modelling. Insight provided by this investigation can be useful to evaluate the effective thermal transport along a wide variety of 2D materials and structures.

cond-mat.mtrl-sci↗

arXiv2017

Mechanical properties of borophene films: A reactive molecular dynamics investigation

The most recent experimental advances could provide ways for the fabrication of several atomic thick and planar forms of boron atoms. For the first time, we explore the mechanical properties of five types of boron films with various vacancy ratios ranging from 0.1 to 0.15, using molecular dynamics simulations with ReaxFF force field. It is found that the Young's modulus and tensile strength decrease with increasing the temperature. We found that boron sheets exhibit an anisotropic mechanical response due to the different arrangement of atoms along the armchair and zigzag directions. At room temperature, 2D Young's modulus and fracture stress of these five sheets appear in the range 63 N/m and 12 N/m, respectively. In addition, the strains at tensile strength are in the ranges of 9, 11, and 10 percent at 1, 300, and 600 K, respectively. This investigation not only reveals the remarkable stiffness of 2D boron, but establishes relations between the mechanical properties of the boron sheets to the loading direction, temperature and atomic structures.

cond-mat.mtrl-sci↗