arXiv subjects

Bojan Šekoranja

Publications and source records attributed to Bojan Šekoranja.

6 recordsLinked to original sources

arXiv2026

Observability Analysis and Online Calibration of Visual-Inertial-Wheel Odometry for 4WIS4WID Mobile Robots

In this paper, we present a visual-inertial-wheel odometry (VIWO) framework with online calibration for four-wheel independently steered and driven (4WIS4WID) mobile robots. We derive a 2D odometry model directly from the four driving velocities and steering angles, using both the longitudinal rolling constraints and the lateral no-slip constraints of all wheels. A preintegration model and analytical Jacobians are developed for efficient filtering and calibration. An observability analysis of the linearized VIWO system shows that a drive-only model makes all steering offsets unobservable, whereas the proposed redundant model restores their observability. The analysis also identifies four standard VINS unobservable directions and three additional directions associated with the arbitrary placement of the odometry reference frame. Furthermore, we characterize several degenerate motions, including zero yaw rate, constant steering, and a non-rolling wheel, and derive the corresponding excitation conditions for the thirteen wheel intrinsics that remain after fixing the odometry frame reference. The performance of the proposed system has been demonstrated in both simulation and real-world experiments on a 4WIS4WID mobile robot.

cs.RO↗

arXiv2026

EKF-Based Depth Camera and Deep Learning Fusion for UAV-Person Distance Estimation and Following in SAR Operations

Vision-based Unmanned Aerial Vehicles (UAVs) frameworks aid human search tasks by detecting and recognizing specific individuals, then tracking and following them while maintaining a safe distance. A key safety requirement for UAV following is the accurate estimation of the distance between camera and target object under real-world conditions, achieved by fusing multiple image modalities. As part of the system for automatic people detection and face recognition using deep learning, in this paper we present the fusion of depth camera measurements and monocular camera-to-body distance estimation for robust tracking and following. Deep learning based filtering of depth camera data and estimation of camera-to-body distance from a monocular camera are achieved with YOLO-pose, enabling real-time fusion of depth information using the Extended Kalman Filter (EKF) algorithm. The proposed subsystem, designed for use in drones, estimates and measures the distance between the depth camera and the human body keypoints, to maintain the safe distance between the drone and the human target. Our system provides an accurate estimated distance, which has been validated against motion capture ground truth data. The system has been tested in real time indoors, where it reduces the average errors, RMSE and standard deviations of distance estimation up to 15,3% in three tested scenarios. Based on the test results, the EKF fusion-based approach increases the depth detection range by reducing the errors outside the optimal depth camera working range. It also shows improved robustness and precision in challenging conditions, such as reflections and poor visibility, making it suitable for SAR.

cs.RO↗

arXiv2026

Motion Compensation for Real Time Ultrasound Scanning in Robotically Assisted Prostate Biopsy Procedures

Prostate cancer is one of the most common types of cancer in men. Its diagnosis by biopsy requires a high level of expertise and precision from the surgeon, so the results are highly operator-dependent. The aim of this work is to develop a robotic system for assisted ultrasound (US) examination of the prostate, a prebiopsy step that could reduce the dexterity requirements and enable faster, more accurate and more available prostate biopsy. We developed and validated a laboratory setup with a collaborative robotic arm that can autonomously scan a prostate phantom and attached the phantom to a medical robotic arm that mimics the patient's movements. The scanning robot keeps the relative position of the US probe and the prostate constant, ensuring a consistent and robust approach to reconstructing the prostate. To reconstruct the prostate, each slice is segmented to generate a series of prostate contours converted into a 3D point cloud used for biopsy planning. The average scan time of the prostate was 30 s, and the average 3D reconstruction of the prostate took 3 s. We performed four motion scenarios: the phantom was scanned in a stationary state (S), with horizontal motion (H), with vertical motion (V), and with a combination of the two (C). System validation is performed by registering the prostate point cloud reconstructions acquired during different motions (H, V, C) with those obtained in the stationary state. ICP registration with a threshold of 0.8 mm yields mean 83.2\% fitness and 0.35 mm RMSE for S-H registration, 84.1\% fitness and 0.37 mm RMSE for S-V registration and 79.4\% fitness and 0.37 mm RMSE for S-C registration. Due to the elastic and soft material properties of the prostate phantom, the maximum robot tracking error was 3 mm, which can be sufficient for prostate biopsy according to medical literature. The maximum delay in motion compensation was 0.5 s.

cs.RO↗

arXiv2025

Autonomous UAV Navigation for Search and Rescue Missions Using Computer Vision and Convolutional Neural Networks

In this paper, we present a subsystem, using Unmanned Aerial Vehicles (UAV), for search and rescue missions, focusing on people detection, face recognition and tracking of identified individuals. The proposed solution integrates a UAV with ROS2 framework, that utilizes multiple convolutional neural networks (CNN) for search missions. System identification and PD controller deployment are performed for autonomous UAV navigation. The ROS2 environment utilizes the YOLOv11 and YOLOv11-pose CNNs for tracking purposes, and the dlib library CNN for face recognition. The system detects a specific individual, performs face recognition and starts tracking. If the individual is not yet known, the UAV operator can manually locate the person, save their facial image and immediately initiate the tracking process. The tracking process relies on specific keypoints identified on the human body using the YOLOv11-pose CNN model. These keypoints are used to track a specific individual and maintain a safe distance. To enhance accurate tracking, system identification is performed, based on measurement data from the UAVs IMU. The identified system parameters are used to design PD controllers that utilize YOLOv11-pose to estimate the distance between the UAVs camera and the identified individual. The initial experiments, conducted on 14 known individuals, demonstrated that the proposed subsystem can be successfully used in real time. The next step involves implementing the system on a large experimental UAV for field use and integrating autonomous navigation with GPS-guided control for rescue operations planning.

cs.RO↗

arXiv2023

Solving Pallet loading Problem with Real-World Constraints

Efficient cargo packing and transport unit stacking play a vital role in enhancing logistics efficiency and reducing costs in the field of logistics. This article focuses on the challenging problem of loading transport units onto pallets, which belongs to the class of NP-hard problems. We propose a novel method for solving the pallet loading problem using a branch and bound algorithm, where there is a loading order of transport units. The derived algorithm considers only a heuristically favourable subset of possible positions of the transport units, which has a positive effect on computability. Furthermore, it is ensured that the pallet configuration meets real-world constraints, such as the stability of the position of transport units under the influence of transport inertial forces and gravity.

cs.RO↗

arXiv2022

Interspecies Collaboration in the Design of Visual Identity: A Case Study

Design usually relies on human ingenuity, but the past decade has seen the field's toolbox expanding to Artificial Intelligence (AI) and its adjacent methods, making room for hybrid, algorithmic creations. This article aims to substantiate the concept of interspecies collaboration - that of natural and artificial intelligence - in the active co-creation of a visual identity, describing a case study of the Regional Center of Excellence for Robotic Technology (CRTA) which opened on 750 m2 in June 2021 within the University of Zagreb. The visual identity of the Center comprises three separately devised elements, each representative of the human-AI relationship and embedded in the institution's logo. Firstly, the letter "C" (from the CRTA acronym) was created using a Gaussian Mixture Model (GMM) applied to (x, y) coordinates that the neurosurgical robot RONNA, CRTA's flagship innovation, generated when hand-guided by a human operator. The second shape of the letter "C" was created by using the same (x, y) coordinates as inputs fed to a neural network whose goal was to output letters in a novel, AI-generated typography. A basic feedforward back-propagating neural network with two hidden layers was chosen for the task. The final and third design element was a trajectory the robot RONNA makes when performing a brain biopsy. As CRTA embodies a state-of-the-art venue for robotics research, the 'interspecies' approach was used to accentuate the importance of human-robot collaboration which is at the core of the newly opened Center, illustrating the potential of reciprocal and amicable relationship that humans could have with technology.

cs.LG↗