Searcharxiv⌕ Search

arXiv subjects

Boubacar Kanté

Publications and source records attributed to Boubacar Kanté.

17 recordsLinked to original sources

Arbitrary fractional quantization in Dirac systems

Oscillations are ubiquitous wave phenomena in physical systems ranging from electromagnetic and acoustic to gravitational waves. The behavior of finite-size systems is traditionally understood to be governed by fundamental oscillatory modes arising from bulk physics and boundary conditions. A paradigmatic example is the particle-in-a-box model introduced with the advent of quantum mechanics, in which confinement leads to discrete resonances and quantized energy levels. Such quantization underpins phenomena including semiconductor quantum dots, where electronic waves are confined in all three spatial dimensions, producing standing-wave modes analogous to the vibrational states of a guitar string. These modes are characterized by integer quantum numbers corresponding to the number of envelope oscillations fitting within the cavity. Recently, counter-intuitive modes have been observed in finite systems with Dirac dispersion, including states that do not oscillate spatially, yet a general theoretical framework for modes in such cavities has been lacking. Here, we discover the phenomenon of arbitrary fractional quantization in wave physics and show that, in finite-size boxes with linear dispersion, the quantum number need not be an integer but can take any real value, including zero. Using Bloch theory in a Dirac-cone photonic crystal with a controllable fractional number of unit cells at its boundaries, we demonstrate continuous control of the cavity-mode envelope wavenumber. We introduce a unified nomenclature for these unconventional modes and derive their corresponding wavefunctions. These counter-intuitive states in open Dirac potentials challenge conventional notions of quantization and open new avenues across wave physics.

physics.optics↗

Efficient inverse design of large-area metasurfaces for incoherent light

Incoherent light is ubiquitous, yet designing optical devices that can handle its random nature is very challenging, since directly averaging over many incoherent incident beams can require a huge number of scattering calculations. We show how to instead solve this problem with a reciprocity technique which leads to three orders of magnitude speedup: one Maxwell solve (using any numerical technique) instead of thousands. This improvement enables us to perform efficient inverse design, large scale optimization of the metasurface for applications such as light collimators and concentrators. We show the impact of the angular distribution of incident light on the resulting performance, and show especially promising designs for the case of "annular" beams distributed only over nonzero angles.

physics.optics↗

Multi-dimensional optical neural network

The development of deep neural networks is witnessing fast growth in network size, which requires novel hardware computing platforms with large bandwidth and low energy consumption. Optical computing has been a potential candidate for next-generation computing systems. Specifically, wavelength-division multiplexing (WDM) has been widely adopted in optical neural network architecture to increase the computation bandwidth. Although existing WDM neural networks architectures have shown promise, they face challenges in the integration of light sources and further increase of the computing bandwidth. To overcome these issues, we introduce a mode-division multiplexing (MDM) strategy, offering a new degree of freedom in optical computing within the micro-ring resonator platform. We propose a MDM approach for small-scale networks and a multi-dimensional architecture for large-scale applications, supplementing WDM with MDM to enhance channel capacity for computations. In this work, we design and experimentally demonstrate key components for the MDM computing system, i.e., a multimode beam splitter, a thermo-optical tuner for the high-order mode, and a multimode waveguide bend. We further show a 2-by-2 matrix multiplexing system fabricated in a foundry that works for both MDM and MDM-WDM computing, which confirms that our approach successfully increases the input vector size for computing and ensures compatibility with existing WDM networks.

physics.optics↗

Interpretable inverse-designed cavity for on-chip nonlinear and quantum optics

Inverse design is a powerful tool in wave-physics and in particular in photonics for compact, high-performance devices. To date, applications have mostly been limited to linear systems and it has rarely been investigated or demonstrated in the nonlinear regime. In addition, the "black box" nature of inverse design techniques has hindered the understanding of optimized inverse-designed structures. We propose an inverse design method with interpretable results to enhance the efficiency of on-chip photon generation rate through nonlinear processes by controlling the effective phase-matching conditions. We fabricate and characterize a compact, inverse-designed device using a silicon-on-insulator platform that allows a spontaneous four-wave mixing process to generate photon pairs at 1.1MHz with a coincidence to accidental ratio of 162. Our design method accounts for fabrication constraints and can be used for scalable quantum light sources in large-scale communication and computing applications.

physics.optics↗

Disordered topological graphs enhancing nonlinear phenomena

Complex networks play a fundamental role in understanding phenomena from the collective behavior of spins, neural networks, and power grids to the spread of diseases. Topological phenomena in such networks have recently been exploited to preserve the response of systems in the presence of disorder. We propose and demonstrate topological structurally disordered systems with a modal structure that enhances nonlinear phenomena in the topological channels by inhibiting the ultrafast leakage of energy from edge modes to bulk modes. We present the construction of the graph and show that its dynamics enhances the topologically protected photon pair generation rate by an order of magnitude. Disordered nonlinear topological graphs will enable advanced quantum interconnects, efficient nonlinear sources, and light-based information processing for artificial intelligence.

physics.optics↗

Database of semiconductor point-defect properties for applications in quantum technologies

Solid-state point defects are attracting increasing attention in the field of quantum information science, because their localized states can act as a spin-photon interface in devices that store and transfer quantum information, which have been used for applications in quantum computing, sensing, and networking. In this work we have performed high-throughput calculations of over 50,000 point defects in various semiconductors including diamond, silicon carbide, and silicon. Focusing on quantum applications, we characterize the relevant optical and electronic properties of these defects, including formation energies, spin characteristics, transition dipole moments, zero-phonon lines. We find 2331 composite defects which are stable in intrinsic silicon, which are then filtered to identify many new optically bright telecom spin qubit candidates and single-photon sources. All computed results and relaxed defect structures are made publicly available online at quantumdefects.com, a living database of defect characteristics which will be continually expanded with new defects and properties, and will enable researchers to select defects tailored to their applications.

quant-ph↗

All-silicon quantum light source by embedding an atomic emissive center in a nanophotonic cavity

Silicon is the most scalable optoelectronic material, and it has revolutionized our lives in many ways. The prospect of quantum optics in silicon is an exciting avenue because it has the potential to address the scaling and integration challenges, the most pressing questions facing quantum science and technology. We report the first all-silicon quantum light source based on a single atomic emissive center embedded in a silicon-based nanophotonic cavity. We observe a more than 30-fold enhancement of luminescence, a near unity atom-cavity coupling efficiency, and an 8-fold acceleration of the emission from the quantum center. Our work opens avenues for large-scale integrated all-silicon cavity quantum electrodynamics and quantum photon interfaces with applications in quantum communication, sensing, imaging, and computing.

quant-ph↗

Suspended single mode microdisk lasers

Miniature semiconductor lasers have attracted a large amount of interest owing to their potential as highly integrated components in photonic circuits or in sensors. Particularly, microdisk lasers exploiting whispering gallery modes have been regarded as an important candidate because of their relatively small footprint and low threshold. However, it has been challenging for microdisk to operate under single mode operation and to lase in a preselected mode. We report subwavelength microdisk resonators suspended in air with connecting bridges and propose a simple method using the number and symmetry of bridges to enhance or reduce wave confinement in the whispering gallery cavity. Moreover, a suitable choice of bridges increases the quality factor of microdisks compared to microdisks resonator without bridges. Using this method, we demonstrate single mode lasing of preselected modes at telecommunication wavelength.

physics.app-ph↗

Towards efficient random metasurfaces

Random media introduce large degrees of freedom in device design and can thus address challenges in manipulating optical waves. Wave shaping with metasurfaces has mainly utilized periodic or quasi-periodic grids, and, the potential of random arrangement of particles for devices has only come under investigation recently. The main difficulty in pursuing random metasurfaces is the identification of the degrees of freedom that optimize their efficiencies and functions. They can also encode information using the statistics of particles distribution. We propose a phase-map that accounts for the statistical nature of random media. The method takes into account effects of random near-field couplings that introduce phase errors by affecting the phase shift of elements. The proposed approach increases the efficiency of our random metasurface devices by up to ~20%. This work paves the way towards the efficient design of random metasurfaces with potential applications in highly secure optical cryptography and information encoding.

physics.optics↗

On the design of random metasurface devices

Metasurfaces are generally designed by placing scatterers in periodic or pseudo-periodic grids. We propose and discuss design rules for functional metasurfaces with randomly placed anisotropic elements. By analyzing the focusing performance of random metasurface lenses as a function of their density and the density of the phase-maps used to design them, we find that the performance of 1D metasurfaces is mostly governed by their density while 2D metasurfaces strongly depend on both the density and the near-field coupling configuration of the surface. The proposed approach is used to design all-polarization random metalenses at near infrared frequencies. Challenges, as well as opportunities of random metasurfaces compared to periodic ones are discussed. Our results pave the way to new approaches in the design of nanophotonic structures and devices from lenses to solar energy concentrators.

physics.optics↗

Towards Random Metasurface based Devices

Metasurfaces are generally designed by placing scatterers in a periodic grid. We propose and discuss design rules for efficient random and functional metasurfaces with anisotropic elements. We investigate the impact of the elements density on the performance of metasurfaces in both periodic and random cases. Using numerical simulations, we apply our approach to the design of all-polarization random metalenses at near infrared frequencies. The results will open a new paradigm in the design of metamaterial and metasurface devices from lenses to solar energy concentrators.

physics.optics↗

From parabolic-trough to metasurface-concentrator

Metasurfaces are promising tools towards novel designs for flat optics applications. As such their quality and tolerance to fabrication imperfections need to be evaluated with specific tools. However, most such tools rely on the geometrical optics approximation and are not straightforwardly applicable to metasurfaces. In this Letter, we introduce and evaluate, for metasurfaces, parameters such as the intercept factor and the slope error usually defined for solar concentrators in the realm of ray-optics. After proposing definitions valid in physical optics, we put forward an approach to calculate them. As examples, we design three different concentrators based on three specific unit cells and assess them numerically. The concept allows for the comparison of the efficiency of the metasurfaces, their sensitivities to fabrication imperfections and will be critical for practical systems.

physics.optics↗

Robust Topological Terahertz Circuits using Semiconductors

Topological Insulator-based devices can transport electrons/photons at the surfaces of materials without any back reflections, even in the presence of obstacles. Topological properties have recently been studied using non-reciprocal materials such as gyromagnetics or using bianisotropy. However, these effects usually saturate at optical frequencies and limit our ability to scale down devices. In order to implement topological devices that we introduce in this paper for the terahertz range, we show that semiconductors can be utilized via their cyclotron resonance in combination with small magnetic fields. We propose novel terahertz operating devices such as the topological tunable power splitter and the topological circulator. This work opens new perspectives in the design of terahertz integrated devices and circuits with high functionality.

physics.optics↗

Exceptional Points in three-dimensional Nanostructures

Exceptional points (EPs) are degeneracies in open wave systems where at least two energy levels and their corresponding eigenstates coalesce. We report evidence of the existence of EPs in 3D plasmonic nanostructures. The systems are composed of coupled plasmonic nanoresonators and can be judiciously and systematically driven to EPs by controlling symmetry-compatible modes via their near-field and far-field interactions. The proposed platform opens the way to the investigation of EPs for enhanced light-matter interactions and applications in communication, sensing and imaging.

physics.optics↗

Resonantly Trapped Bound State in the Continuum Laser

Cavities play a fundamental role in wave phenomena from quantum mechanics to electromagnetism and dictate the spatiotemporal physics of lasers. In general, they are constructed by closing all "doors" through which waves can escape. We report, at room temperature, a bound state in the continuum laser that harnesses optical modes residing in the radiation continuum but nonetheless may possess arbitrarily high quality factors. These counterintuitive cavities are based on resonantly trapped symmetry-compatible modes that destructively interfere. Our experimental demonstration opens exciting avenues towards coherent sources with intriguing topological properties for optical trapping, biological imaging, and quantum communication.

physics.optics↗

Transmission Enhancement of High-$k$ Waves through Metal-InGaAsP Multilayers Calculated via Scattering Matrix Method with Semi-Classical Optical Gain

We analyze the steady-state transmission of high-momentum (high-$k$) electromagnetic waves through metal-semiconductor multilayer systems with loss and gain in the near-infrared (NIR). Using a semi-classical optical gain model in conjunction with the scattering matrix method (SMM), we study indium gallium arsenide phosphide (InGaAsP) quantum wells as the active semiconductor, in combination with the metals, aluminum-doped zinc oxide (AZO) and silver (Ag). Under moderate external pumping levels, we find that NIR transmission through Ag/InGaAsP systems may be enhanced by several orders of magnitude relative to the unpumped case, over a large angular and frequency bandwidth. Conversely, transmission enhancement through AZO/InGaAsP systems is orders of magnitude smaller, and has a strong frequency dependence. We discuss the relative importance of Purcell enhancement on our results and validate analytical calculations based on the SMM with numerical finite-difference time domain simulations.

physics.optics↗

Extremely Thin Dielectric Metasurface for Carpet Cloaking

We demonstrate a novel and simple approach to cloaking a scatterer on a ground plane. We use an extremely thin dielectric metasurface (λ/12) to reshape the wavefronts distorted by a scatterer in order to mimic the reflection pattern of a flat ground plane. To achieve such carpet cloaking, the reflection angle has to be equal to the incident angle everywhere on the scatterer. We use a graded metasurface and calculate the required phase gradient to achieve cloaking. Our metasurface locally provides additional phase to the wavefronts to compensate for the phase difference amongst light paths induced by the geometrical distortion. We design our metasurface in the microwave range using highly sub-wavelength dielectric resonators. We verify our design by full-wave time-domain simulations using micro-structured resonators and show that results match theory very well. This approach can be applied to hide any scatterer on a ground plane not only at microwave frequencies, but also at higher frequencies up to the near infrared.

physics.optics↗