Searcharxiv⌕ Search

arXiv subjects

Brahmani Challa

Publications and source records attributed to Brahmani Challa.

3 recordsLinked to original sources

Demonstration of High fmax (> 80 GHz) in Recessed-Gate and Passivated $\mathrm{Al_{0.60}Ga_{0.40}N}$ Channel RF HEMTs

In this work, ultra-wide bandgap (UWBG) $\mathrm{Al_{0.60}Ga_{0.40}N}$ channel high-electron-mobility transistors (HEMTs) with an $\mathrm{Al_{0.81}Ga_{0.19}N}$ barrier and an $\mathrm{Al_{0.86}Ga_{0.14}N}$ back barrier were fabricated. The devices featured a recessed T-gate structure and $\mathrm{SiO_2}$ passivation. Scaled devices achieved a cutoff frequency ($f_{\mathrm{T}}$) of 35 GHz, a maximum oscillation frequency ($f_{\mathrm{max}}$) of 82 GHz, and an average breakdown field $> 3 \mathrm{MV/cm}$, while maintaining a reasonable current collapse of $\sim 20\%$ under a 40 V drain bias in pinch-off condition. Devices with larger dimensions demonstrated a high off-state breakdown voltage of 883 V and an $f_{\mathrm{T}}$ of 24 GHz, yielding a high Johnson's figure of merit ($\mathrm{JFOM}$) of 21.19 $\mathrm{THz \cdot V}$. Across all device geometries, a high $I_{\mathrm{ON}}/I_{\mathrm{OFF}}$ ratio exceeding $10^6$ was observed with drain and gate leakage currents strictly below $10^{-6} \mathrm{A/mm}$. This work demonstrates an optimized design for $\mathrm{AlGaN}$ channel RF HEMTs and their excellent potential for X- to Ka-band applications.

physics.app-ph↗

$>3\text{ W/mm}$ Output Power $\mathrm{Al}_{0.61}\mathrm{Ga}_{0.39}\mathrm{N}$ Channel HEMT with $24.4\%$ Associated PAE at $10\text{ GHz}$

In this work, an ultra-wide bandgap (UWBG) high-electron-mobility transistor (HEMT) was fabricated using an $\mathrm{Al}_{0.76}\mathrm{Ga}_{0.24}\mathrm{N}$ barrier and an $\mathrm{Al}_{0.61}\mathrm{Ga}_{0.39}\mathrm{N}$ channel with thick $\mathrm{SiO}_2$ passivation. The device demonstrated low current collapse at $40\text{ V}$ drain bias. At $10\text{ GHz}$, the device exhibited an output power of $3.07\text{ W/mm}$ with an associated power-added efficiency (PAE) of $24.4\%$. A peak PAE of $33.9\%$ was achieved at an associated output power of $2.14\text{ W/mm}$. This excellent large-signal performance highlights the strong potential of UWBG $\mathrm{AlGaN}$ channel devices for X-band applications.

physics.app-ph↗

Single-crystalline high-quality beta-Ga2O3 pseudo-substrate on sapphire through sputtering for epitaxial deposition

Solid-phase epitaxy (SPE) of beta-Ga2O3 thin films by radio-frequency (RF) sputtering and then crystallized through high-temperature post-deposition annealing is employed on sapphire substrates, yielding a high-quality pseudo-substrate for subsequent buffer growth via MOCVD and LPCVD. Low roughness (<0.5 nm) and sharp single-crystalline diffraction peaks corresponding to the (-201), (-402), and (-603) reflections of beta-Ga2O3 were observed in the SPE beta-Ga2O3 film and the subsequent epitaxial buffer layer. N-doped Ga2O3 film on SPE Ga2O3 film grown by LPCVD showed step-assisted growth mode with reasonable electronic behavior with 45 cm^2/V-s mobility at a bulk carrier concentration of 1.3e17 cm^-3. These results suggest that SPE Ga2O3 is a promising pathway to advance the development of beta-Ga2O3 on foreign substrates.

cond-mat.mtrl-sci↗