arXiv subjects

Branden Allen

Publications and source records attributed to Branden Allen.

15 recordsLinked to original sources

arXiv2026

He'e-Lab: A modular testbed for astrophotonics and wavefront sensing development

Advanced astronomical instrumentation requires accessible, reconfigurable platforms to validate novel technologies and algorithms before on-sky deployment. We present the design, architecture, and alignment validation of the Hawaii Experimental Engineering Lab (He'e-Lab), a state-of-the-art modular testbed dedicated to two complementary research tracks: (A) the integration and characterization of astrophotonics components within a real-time computing loop, and (B) the development of advanced wavefront sensing and control (WFS&C) algorithms. The testbed features a broadband supercontinuum source (500 nm to 2 microns), a high-order 1k-actuator Boston Micromachines deformable mirror, and a 37-segment hexagonal mirror assembly providing piston-tip-tilt control to emulate segmented apertures like Keck and JWST. Downstream capabilities include a HASO 126 Shack-Hartmann sensor, a real-time computing environment driven by the CACAO package, and a modular injection platform coupled to a visible-wavelength spectrograph (R3, 000). We report on the successful system alignment and outline the roadmap for upcoming adaptive optics and photonic device validation frameworks.

astro-ph.IM↗

arXiv2023

Tuning of Nuclear Spectroscopic Telescope Array (NuSTAR) Application Specific Integrated Circuits (ASICs) to improve low energy threshold of future Hard X-ray Imaging Detectors

Detector commanding, processing and readout of spaceborne instrumentation is often accomplished with Application Specific Integrated Circuits (ASICs). The ASIC designed for the Nuclear Spectroscopic Telescope Array (NuSTAR) mission (NuASIC) enables future tiled CdZnTe (CZT) detector array readout for x-ray detectors such as the High Resolution Energetic X-ray Imager (HREXI). Modified NuASIC gain settings have been implemented for HREXI's broader targeted imaging energy range (3-300 keV) compared to NuSTAR (2-79 keV), which may require updated NuASIC internal parameters for optimal energy resolution. To reach HREXI's targeted low energy threshold, we have also enabled the NuASIC's "Charge Pump Mode" (CPM), which introduces an additional tuning parameter. In this paper, we describe the mechanics of the NuASIC's adjustable parameters and use our recently developed ASIC Test Stand (ATS) to probe a "bare" NuASIC using its internal test pulser. We record the effects of parameter tuning on the device's electronics noise and low energy threshold and report the optimal set of parameters for HREXI's updated gain setting. We detail a semi-automated procedure to derive the optimal parameters for each of HREXI's large area, closely tiled NuASIC/CZT detectors to expedite instrument integration.

astro-ph.IM↗

arXiv2023

Imaging effects due to pixel distortions in CdZnTe (CZT) detectors -- results from the HREXI Calibration Facility (HCF)

ProtoEXIST2 (P2) was a prototype imaging X-ray detector plane developed for wide-field Time Domain Astrophysics (TDA) in the 5 - 200 keV energy band. It was composed of an 8 $\times$ 8 array of 5 mm thick, 2cm $\times$ 2cm pixelated (32 $\times$ 32) CdZnTe (CZT) detectors with a 0.6 mm pitch that utilize the NuSTAR ASIC(NuASIC) for readout. During the initial detector development process leading up to post-flight examination of the entire detector plane, distortions in expected pixel positions and shapes were observed in a significant fraction of the detectors. The HREXI (High Resolution Energetic X-ray Imager) Calibration Facility (HCF) was designed and commissioned to improve upon these early experiments and to rapidly map out and characterize pixel non-uniformities and defects within CZT detector planes at resolutions down to 50 $\rm \mu$m. Using this facility, the sub-pixel level detector response of P2 was measured at 100 $\rm \mu$m resolution and analyzed to extract and evaluate the area and profile of individual pixels, their morphology across the entire P2 detector plane for comparison with previous measurements and to provide additional characterization. In this article, we evaluate the imaging performance of a coded-aperture telescope using the observed pixel morphology for P2 detectors. This investigation will serve as an initial guide for detector selection in the development of HREXI detector planes, for the future implementation of the 4pi X-Ray Imaging Observatory (4piXIO) mission which aims to provide simultaneous and continuous imaging of the full sky ($\rm 4\pi$ sr) in the 3-200 keV energy band with $\rm \simeq$ 2 arcmin angular resolution and $\simeq$ 10 arcsec source localization, as well as other, future coded-aperture instruments.

astro-ph.IM↗

arXiv2022

Testing Station for Fast Screening of Through Silicon Via (TSV)-enabled Application Specific Integrated Circuits (ASICs) for Hard X-ray Imaging Detectors

Application Specific Integrated Circuits (ASICs) are used in space-borne instruments for signal processing and detector readout. The electrical interface of these ASICs to frontend printed circuit boards (PCBs) is commonly accomplished with wire bonds. Through Silicon Via (TSV) technology has been proposed as an alternative interconnect technique that will reduce assembly complexity of ASIC packaging by replacing wire bonding with flip-chip bonding. TSV technology is advantageous in large detector arrays where TSVs enable close detector tiling on all sides. Wafer-level probe card testing of TSV ASICs is frustrated by solder balls introduced onto the ASIC surface for flip-chip bonding that hamper alignment. Therefore, we developed the ASIC Test Stand (ATS) to enable rapid screening and characterization of individual ASIC die. We successfully demonstrated ATS operation on ASICs originally developed for CdZnTe detectors on the Nuclear Spectroscopic and Telescope Array (NuSTAR) mission that were later modified with TSVs in a via-last process. We tested both back-side blind-TSVs and front-side through-TSVs, with results from internal test pulser measurements that demonstrate performance equal to or exceeding the probe card wafer-level testing data. The ATS can easily be expanded or duplicated in order to parallelize ASIC screening for large area imaging detectors of future space programs.

astro-ph.IM↗

arXiv2021

Calibration and Performance of the REgolith X-Ray Imaging Spectrometer (REXIS) Aboard NASA's OSIRIS-REx Mission to Bennu

The REgolith X-ray Imaging Spectrometer (REXIS) instrument on board NASA's OSIRIS-REx mission to the asteroid Bennu is a Class-D student collaboration experiment designed to detect fluoresced X-rays from the asteroid's surface to measure elemental abundances. In July and November 2019 REXIS collected ~615 hours of integrated exposure time of Bennu's sun-illuminated surface from terminator orbits. As reported in Hoak et al. (2021), the REXIS data do not contain a clear signal of X-ray fluorescence from the asteroid, in part due to the low incident solar X-ray flux during periods of observation. To support the evaluation of the upper limits on the detectable X-ray signal that may provide insights for the properties of Bennu's regolith, we present an overview of the REXIS instrument, its operation, and details of its in-flight calibration on astrophysical X-ray sources. This calibration includes the serendipitous detection of the transient X-ray binary MAXI J0637-430 during Bennu observations, demonstrating the operational success of REXIS at the asteroid. We convey some lessons learned for future X-ray spectroscopy imaging investigations of asteroid surfaces.

astro-ph.EP↗

arXiv2021

Proof of Concept for Through Silicon Vias (TSVs) in Application Specific Integrated Circuits (ASICs) for Hard X-ray Imaging Detectors

Application Specific Integrated Circuits (ASICs) are commonly used to efficiently process the signals from sensors and detectors in space. Wire bonding is a space qualified technique of making interconnections between ASICs and their substrate packaging board for power, control and readout of the ASICs. Wire bonding is nearly ubiquitous in modern space programs, but their exposed wires can be prone to damage during assembly and subject to electric interference during operations. Additional space around the ASICs needed for wire bonding also impedes efficient packaging of large arrays of detectors. Here we introduce the Through Silicon Vias (TSV) technology that replaces wire bonds and eliminates their shortcomings. We have successfully demonstrated the feasibility of implementing TSVs to existing ASIC wafers (a.k.a. a via-last process) developed for processing the X-ray signals from the X-ray imaging CdZnTe detectors on the Nuclear Spectroscopic Telescope Array (NuSTAR) Small Explorer mission that was launched in 2012. While TSVs are common in the semiconductor industry, this is the first (to our knowledge) successful application for Astrophysics imaging instrumentation. We expect that the TSV technology will simplify the detector assembly, and thus will enable significant cost and schedule savings in assembly of large area CdZnTe detectors.

astro-ph.IM↗

arXiv2020

HCF (HREXI Calibration Facility): Mapping out sub-pixel level responses from high resolution Cadmium Zinc Telluride (CZT) imaging X-ray detectors

The High Resolution Energetic X-Ray Imager (HREXI) CZT detector development program at Harvard is aimed at developing tiled arrays of finely pixelated CZT detectors for use in wide-field coded aperture 3-200 keV X-ray telescopes. A pixel size of $\simeq$ 600 $μm$ has already been achieved in the ProtoEXIST2 (P2) detector plane with CZT read out by the NuSTAR ASIC. This paves the way for even smaller 300 $μm$ pixels in the next generation HREXI detectors. This article describes a new HREXI calibration facility (HCF) which enables a high resolution sub-pixel level (100 $μm$) 2D scan of a 256 $cm^2$ tiled array of 2 $\times$ 2 cm CZT detectors illuminated by a bright X-ray AmpTek Mini-X tube source at timescales of around a day. HCF is a significant improvement from the previous apparatus used for scanning these detectors which took $\simeq$ 3 weeks to complete a 1D scan of a similar detector plane. Moreover, HCF has the capability to scan a large tiled array of CZT detectors ($32cm \times 32cm$) at 100 $μm$ resolution in the 10 - 50 keV energy range which was not possible previously. This paper describes the design, construction, and implementation of HCF for the calibration of the P2 detector plane.

astro-ph.IM↗

arXiv2016

Imaging Analysis of the Hard X-ray Telescope ProtoEXIST2 and New Techniques for High Resolution Coded Aperture Telescopes

Wide-field (> 100 deg$^2$) hard X-ray coded-aperture telescopes with high angular resolution (< 2') will enable a wide range of time domain astrophysics. For instance, transient sources such as gamma-ray bursts can be precisely localized without assistance of secondary focusing X-ray telescopes to enable rapid followup studies. On the other hand, high angular resolution in coded-aperture imaging introduces a new challenge in handling the systematic uncertainty: average photon count per pixel is often too small to establish a proper background pattern or model the systematic uncertainty in a time scale where the model remains invariant. We introduce two new techniques to improve detection sensitivity, which are designed for, but not limited to high resolution coded-aperture system: a self-background modeling scheme which utilizes continuous scan or dithering operations, and a Poisson-statistics based probabilistic approach to evaluate the significance of source detection without subtraction in handling the background. We illustrate these new imaging analysis techniques in high resolution coded-aperture telescope using the data acquired by the wide-field hard X-ray telescope ProtoEXIST2 during the high-altitude balloon flight in Fall, 2012. We review the imaging sensitivity of ProtoEXIST2 during the flight, and demonstrate the performance of the new techniques using our balloon flight data in comparison with simulated ideal Poisson background.

astro-ph.IM↗

arXiv2014

Modeling the Expected Performance of the REgolith X-ray Imaging Spectrometer (REXIS)

OSIRIS-REx is the third spacecraft in the NASA New Frontiers Program and is planned for launch in 2016. OSIRIS-REx will orbit the near-Earth asteroid (101955) Bennu, characterize it, and return a sample of the asteroid's regolith back to Earth. The Regolith X-ray Imaging Spectrometer (REXIS) is an instrument on OSIRIS-REx designed and built by students at MIT and Harvard. The purpose of REXIS is to collect and image sun-induced fluorescent X-rays emitted by Bennu, thereby providing spectroscopic information related to the elemental makeup of the asteroid regolith and the distribution of features over its surface. Telescopic reflectance spectra suggest a CI or CM chondrite analog meteorite class for Bennu, where this primitive nature strongly motivates its study. A number of factors, however, will influence the generation, measurement, and interpretation of the X-ray spectra measured by REXIS. These include: the compositional nature and heterogeneity of Bennu, the time-variable Solar state, X-ray detector characteristics, and geometric parameters for the observations. In this paper, we will explore how these variables influence the precision to which REXIS can measure Bennu's surface composition. By modeling the aforementioned factors, we place bounds on the expected performance of REXIS and its ability to ultimately place Bennu in an analog meteorite class.

astro-ph.IM↗

arXiv2013

Tiled Array of Pixelated CZT Imaging Detectors for ProtoEXIST2 and MIRAX-HXI

We have assembled a tiled array (220 cm2) of fine pixel (0.6 mm) imaging CZT detectors for a balloon borne wide-field hard X-ray telescope, ProtoEXIST2. ProtoEXIST2 is a prototype experiment for a next generation hard X-ray imager MIRAX-HXI on board Lattes, a spacecraft from the Agencia Espacial Brasilieira. MIRAX will survey the 5 to 200 keV sky of Galactic bulge, adjoining southern Galactic plane and the extragalactic sky with 6' angular resolution. This survey will open a vast discovery space in timing studies of accretion neutron stars and black holes. The ProtoEXIST2 CZT detector plane consists of 64 of 5 mm thick 2 cm x 2 cm CZT crystals tiled with a minimal gap. MIRAX will consist of 4 such detector planes, each of which will be imaged with its own coded-aperture mask. We present the packaging architecture and assembly procedure of the ProtoEXIST2 detector. On 2012, Oct 10, we conducted a successful high altitude balloon experiment of the ProtoEXIST1 and 2 telescopes, which demonstrates their technology readiness for space application. During the flight both telescopes performed as well as on the ground. We report the results of ground calibration and the initial results for the detector performance in the balloon flight.

astro-ph.IM↗

arXiv2013

The REgolith X-Ray Imaging Spectrometer (REXIS) for OSIRIS-REx: Identifying Regional Elemental Enrichment on Asteroids

The OSIRIS-REx Mission was selected under the NASA New Frontiers program and is scheduled for launch in September of 2016 for a rendezvous with, and collection of a sample from the surface of asteroid Bennu in 2019. 101955 Bennu (previously 1999 RQ36) is an Apollo (near-Earth) asteroid originally discovered by the LINEAR project in 1999 which has since been classified as a potentially hazardous near-Earth object. The REgolith X-Ray Imaging Spectrometer (REXIS) was proposed jointly by MIT and Harvard and was subsequently accepted as a student led instrument for the determination of the elemental composition of the asteroid's surface as well as the surface distribution of select elements through solar induced X-ray fluorescence. REXIS consists of a detector plane that contains 4 X-ray CCDs integrated into a wide field coded aperture telescope with a focal length of 20 cm for the detection of regions with enhanced abundance in key elements at 50 m scales. Elemental surface distributions of approximately 50-200 m scales can be detected using the instrument as a simple collimator. An overview of the observation strategy of the REXIS instrument and expected performance are presented here.

astro-ph.IM↗

arXiv2013

The High Resolution X-Ray Imaging Detector Planes for the MIRAX Mission

The MIRAX X-ray observatory, the first Brazilian-led astrophysics space mission, is designed to perform an unprecedented wide-field, wide-band hard X-ray (5-200 keV) survey of Galactic X-ray transient sources. In the current configuration, MIRAX will carry a set of four coded-mask telescopes with high spatial resolution Cadmium Zinc Telluride (CZT) detector planes, each one consisting of an array of 64 closely tiled CZT pixelated detectors. Taken together, the four telescopes will have a total detection area of 959 cm^2, a large field of view (60x60 degrees FWHM), high angular resolution for this energy range (6 arcmin) and very good spectral resolution (~2 keV @ 60 keV). A stratospheric balloon-borne prototype of one of the MIRAX telescopes has been developed, tested and flown by the Harvard-Smithsonian Center for Astrophysics (CfA) as part of the ProtoEXIST program. In this paper we show results of validation and calibration tests with individual CZT detectors of the ProtoEXIST second generation experiment (P2). Each one of 64 detector units of the P2 detector plane consists of an ASIC, developed by Caltech for the NuSTAR telescope, hybridized to a CZT crystal with 0.6 mm pixel size. The performance of each detector was evaluated using radioactive sources in the laboratory. The calibration results show that the P2 detectors have average energy resolution of ~2.1 keV @ 60 keV and ~2.3 keV @ 122 keV. P2 was also successfully tested on near-space environment on a balloon flight, demonstrating the detector unit readiness for integration on a space mission telescope, as well as satisfying all MIRAX mission requirements.

astro-ph.IM↗

arXiv2010

ProtoEXIST: Advanced Prototype CZT Coded Aperture Telescopes for EXIST

{\it ProtoEXIST1} is a pathfinder for the {\it EXIST-HET}, a coded aperture hard X-ray telescope with a 4.5 m$^2$ CZT detector plane a 90$\times$70 degree field of view to be flown as the primary instrument on the {\it EXIST} mission and is intended to monitor the full sky every 3 h in an effort to locate GRBs and other high energy transients. {\it ProtoEXIST1} consists of a 256 cm$^2$ tiled CZT detector plane containing 4096 pixels composed of an 8$\times$8 array of individual 1.95 cm $\times$ 1.95 cm $\times$ 0.5 cm CZT detector modules each with a 8 $\times$ 8 pixilated anode configured as a coded aperture telescope with a fully coded $10^\circ\times10^\circ$ field of view employing passive side shielding and an active CsI anti-coincidence rear shield, recently completed its maiden flight out of Ft. Sumner, NM on the 9th of October 2009. During the duration of its 6 hour flight on-board calibration of the detector plane was carried out utilizing a single tagged 198.8 nCi Am-241 source along with the simultaneous measurement of the background spectrum and an observation of Cygnus X-1. Here we recount the events of the flight and report on the detector performance in a near space environment. We also briefly discuss {\it ProtoEXIST2}: the next stage of detector development which employs the {\it NuSTAR} ASIC enabling finer (32$\times$32) anode pixilation. When completed {\it ProtoEXIST2} will consist of a 256 cm$^2$ tiled array and be flown simultaneously with the ProtoEXIST1 telescope.

astro-ph.IM↗

arXiv2009

Measuring the Accreting Stellar and Intermediate Mass Black Hole Populations in the Galaxy and Local Group

The population of stellar black holes (SBHs) in the Galaxy and galaxies generally is poorly known in both number and distribution. SBHs are the fossil record of the massive stars in galaxy evolution and may have produced some (if not all) of the intermediate mass (\gsim100\Msun) black holes (IMBHs) and, in turn, the central supermassive black holes (SMBHs) in galactic nuclei. For the first time, a Galaxy-wide census of accreting black holes, and their more readily recognizable tracer population, accreting neutron stars (NSs), could be measured with a wide-field hard X-ray imaging survey and soft X-ray and optical/IR prompt followup -- as proposed for the EXIST mission.

astro-ph.HE↗

arXiv2009

The Dynamic X-ray Sky of the Local Universe

Over the next decade, we can expect time domain astronomy to flourish at optical and radio wavelengths. In parallel with these efforts, a dedicated transient "machine" operating at higher energies (X-ray band through soft gamma-rays) is required to reveal the unique subset of events with variable emission predominantly visible above 100 eV. Here we focus on the transient phase space never yet sampled due to the lack of a sensitive, wide-field and triggering facility dedicated exclusively to catching high energy transients and enabling rapid coordinated multi-wavelength follow-up. We first describe the advancements in our understanding of known X-ray transients that can only be enabled through such a facility and then focus on the classes of transients theoretically predicted to be out of reach of current detection capabilities. Finally there is the exciting opportunity of revealing new classes of X-ray transients and unveiling their nature through coordinated follow-up observations at longer wavelengths.

astro-ph.HE↗