arXiv subjects

Brandon Redding

Publications and source records attributed to Brandon Redding.

32 records · Page 2Linked to original sources

arXiv2014

High-resolution and broadband all-fiber spectrometers

The development of optical fibers has revolutionized telecommunications by enabling long-distance broad-band transmission with minimal loss. In turn, the ubiquity of high-quality low-cost fibers enabled a number of additional applications, including fiber sensors, fiber lasers, and imaging fiber bundles. Recently, we showed that a mutlimode optical fiber can also function as a spectrometer by measuring the wavelength-dependent speckle pattern formed by interference between the guided modes. Here, we reach a record resolution of 1 pm at wavelength 1500 nm using a 100 meter long multimode fiber, outperforming the state-of-the-art grating spectrometers. we also achieved broad-band operation with a 4 cm long fiber, covering 400 nm - 750 nm with 1 nm resolution. The fiber spectrometer, consisting of the fiber which can be coiled to a small volume and a monochrome camera that records the speckle pattern, is compact, lightweight, and low cost while providing ultrahigh resolution, broad bandwidth and low loss.

physics.optics↗

arXiv2014

Active control of emission directionality of semiconductor microdisk lasers

We demonstrate lasing mode selection in nearly circular semiconductor microdisks by shaping the spatial profile of optical pump. Despite of strong mode overlap, adaptive pumping suppresses all lasing modes except the targeted one. Due to slight deformation of the cavity shape and boundary roughness, each lasing mode has distinct emission pattern. By selecting different mode to be the dominant lasing mode, we can switch both the lasing frequency and the output direction. Such tunability by external pump after the laser is fabricated enhances the functionality of semiconductor microcavity lasers.

physics.optics↗

arXiv2013

Efficient method for controlling the spatial coherence of a laser

An efficient method to tune the spatial coherence of a degenerate laser over a broad range with minimum variation in the total output power is presented. It is based on varying the diameter of a spatial filter inside the laser cavity. The number of lasing modes supported by the degenerate laser can be controlled from 1 to 320,000, with less than a 50% change in the total output power. We show that a degenerate laser designed for low spatial coherence can be used as an illumination source for speckle-free microscopy that is 9 orders of magnitude brighter than conventional thermal light.

physics.optics↗

arXiv2013

Multimode Coupling by Boundary Wave Scattering

We show that coupling among multiple resonances can be conveniently introduced and controlled by boundary wave scattering. We demonstrate this principle in optical microcavities of quasi-circular shape, where the couplings of multiple modes are determined by the scattering from different harmonic boundary deformations. We analyze these couplings using a perturbation theory, which gives an intuitive understanding of the first-order and higher-order scattering processes. Different scattering paths between two boundary waves can either enhance or reduce their coupling strength. The effect of controlled multimode coupling is most pronounced in the direction of output from an open cavity, which can cause a dramatic change of the external cavity field distribution.

physics.optics↗

arXiv2013

On-Chip Random Spectrometer

Light scattering in disordered media has been studied extensively due to its prevalence in natural and artificial systems [1]. In the field of photonics most of the research has focused on understanding and mitigating the effects of scattering, which are often detrimental. For certain applications, however, intentionally introducing disorder can actually improve the device performance, e.g., in photovoltaics optical scattering improves the efficiency of light harvesting [2-5]. Here, we utilize multiple scattering in a random photonic structure to build a compact on-chip spectrometer. The probe signal diffuses through a scattering medium generating wavelength-dependent speckle patterns which can be used to recover the input spectrum after calibration. Multiple scattering increases the optical pathlength by folding the paths in a confined geometry, enhancing the spectral decorrelation of speckle patterns and thus increasing the spectral resolution. By designing and fabricating the spectrometer on a silicon wafer, we are able to efficiently channel the scattered light to the detectors, minimizing the reflection loss. We demonstrate spectral resolution of 0.75 nm at a wavelength of 1500 nm in a 25 μm by 50 μm random structure. Furthermore, the phenomenal control afforded by semiconductor nanofabrication technology enabled us to engineer the disorder to reduce the out-of-plane scattering loss. Such a compact, high-resolution spectrometer that is integrated on a silicon chip and robust against fabrication imperfections is well suited for lab-on-a-chip spectroscopy applications.

physics.optics↗

arXiv2013

Position-dependent diffusion of light in disordered waveguides

Diffusion has been widely used to describe a random walk of particles or waves, and it requires only one parameter -- the diffusion constant. For waves, however, diffusion is an approximation that disregards the possibility of interference. Anderson localization, which manifests itself through a vanishing diffusion coefficient in an infinite system, originates from constructive interference of waves traveling in loop trajectories -- pairs of time-reversed paths returning to the same point. In an open system of finite size, the return probability through such paths is reduced, particularly near the boundary where waves may escape. Based on this argument, the self-consistent theory of localization and the supersymmetric field theory predict that the diffusion coefficient varies spatially inside the system. A direct experimental observation of this effect is a challenge because it requires monitoring wave transport inside the system. Here, we fabricate two-dimensional photonic random media and probe position-dependent diffusion inside the sample from the third dimension. By varying the geometry of the system or the dissipation which also limits the size of loop trajectories, we are able to control the renormalization of the diffusion coefficient. This work shows the possibility of manipulating diffusion via the interplay of localization and dissipation.

physics.optics↗

arXiv2013

Multimode optical fiber based spectrometers

A standard multimode optical fiber can be used as a general purpose spectrometer after calibrating the wavelength dependent speckle patterns produced by interference between the guided modes of the fiber. A transmission matrix was used to store the calibration data and a robust algorithm was developed to reconstruct an arbitrary input spectrum in the presence of experimental noise. We demonstrate that a 20 meter long fiber can resolve two laser lines separated by only 8 pm. At the other extreme, we show that a 2 centimeter long fiber can measure a broadband continuous spectrum generated from a supercontinuum source. We investigate the effect of the fiber geometry on the spectral resolution and bandwidth, and also discuss the additional limitation on the bandwidth imposed by speckle contrast reduction when measuring dense spectra. Finally, we demonstrate a method to reduce the spectrum reconstruction error and increase the bandwidth by separately imaging the speckle patterns of orthogonal polarizations. The multimode fiber spectrometer is compact, lightweight, low cost, and provides high resolution with low loss.

physics.optics↗

arXiv2012

Low-loss high-speed speckle reduction using a colloidal dispersion

We present a simple and robust approach to reduce laser speckle, which has limited the adoption of lasers in imaging and display applications. We use colloidal solutions that can quickly reduce speckle contrast due to the Brownian motion of the scattering particles. The high insertion loss associated with propagation through a colloidal solution was overcome by using white paint to cover the sides of the cuvette and an optical fiber to deliver the laser light deep into the colloidal solution, enabling transmission greater than 90%. The diffused laser output followed a Lambertian distribution and produced speckle contrast below 4% at an integration time of 129 μs. The ability for colloidal solutions to achieve fast speckle reduction without power consumption while maintaining high transmission, low cost, a compact size, and a long lifetime, makes our approach useful for a wide range of laser imaging and projection applications.

physics.optics↗

arXiv2012

Extreme Sensitivity of Output Directionality to Boundary Perturbation in Wavelength-Scale Microcavities

We report a surprising observation that the output directionality from wavelength-scale optical microcavities displays extreme sensitivity to deformations of the cavity shape. A variation of the cavity boundary on the order of ten thousandth of a wavelength may flip the output directions by 180 degrees. Our analysis based on a perturbation theory reveals that a tiny shape variation can cause a strong mixing of nearly degenerate cavity resonances with different angular momenta, and their interference determines the farfield emission pattern. This work shows the possibility of utilizing carefully-designed wavelength-scale microcavities for high-resolution detection and sensing applications.

physics.optics↗

arXiv2012

Using a multimode fiber as a high resolution, low loss spectrometer

We propose and demonstrate that a conventional multimode fiber can function as a high resolution, low loss spectrometer. The proposed spectrometer consists only of the fiber and a camera that images the speckle pattern generated by interference among the fiber modes. While this speckle pattern is detrimental to many applications, it encodes information about the spectral content of the input signal which can be recovered using calibration data. We achieve a spectral resolution of 0.15 nm over 25 nm bandwidth using 1 meter long fiber, and 0.03 nm resolution over 5 nm bandwidth with a 5 meter fiber. The insertion loss is less than 10%, and the signal to noise ratio in the reconstructed spectra is over 1000.

physics.optics↗

arXiv2012

Local chirality of optical waves in ultrasmall resonators

The local chiral symmetry between clockwise (CW) and counter-clockwise (CCW) propagating light in a deformed microcavity can be broken by wave optics effects, which become significant as the cavity size approaches the wavelength. We show that the spatial separation of the CW and CCW ray orbits underlying the high quality factor resonant modes results in unidirectional emission in free space. In the presence of a waveguide, evanescent coupling also becomes directional, and the output direction can be varied by selecting the coupling position along the cavity boundary. Our results demonstrate that the local chirality can be utilized to control the output directionality and enhance the collection efficiency of emission from ultrasmall resonators.

physics.optics↗

arXiv2011

Speckle-free laser imaging

Many imaging applications require increasingly bright illumination sources, motivating the replacement of conventional thermal light sources with light emitting diodes (LEDs), superluminescent diodes (SLDs) and lasers. Despite their brightness, lasers and SLDs are poorly suited for full-field imaging applications because their high spatial coherence leads to coherent artifacts known as speckle that corrupt image formation. We recently demonstrated that random lasers can be engineered to provide low spatial coherence. Here, we exploit the low spatial coherence of specifically-designed random lasers to perform speckle-free full-field imaging in the setting of significant optical scattering. We quantitatively demonstrate that images generated with random laser illumination exhibit higher resolution than images generated with spatially coherent illumination. By providing intense laser illumination without the drawback of coherent artifacts, random lasers are well suited for a host of full-field imaging applications from full-field microscopy to digital light projector systems.

physics.optics↗

arXiv2011

Directional waveguide coupling from a wavelength-scale deformed microdisk laser

We demonstrate uni-directional evanescent coupling of lasing emission from a wavelength-scale deformed microdisk to a waveguide. This is attributed to the Goos-Hänchen shift and Fresnel filtering effect that result in a spatial separation of the clockwise (CW) and counter-clockwise (CCW) propagating ray orbits. By placing the waveguide tangentially at different locations to the cavity boundary, we may selectively couple the CW (CCW) wave out, leaving the CCW (CW) wave inside the cavity, which also reduces the spatial hole burning effect. The device geometry is optimized with a full-wave simulation tool, and the lasing behavior and directional coupling are confirmed experimentally.

physics.optics↗

arXiv2011

Spatial coherence of random laser emission

We experimentally studied the spatial coherence of random laser emission from dye solutions containing nanoparticles. The spatial coherence, measured in a double-slit experiment, varied significantly with the density of scatterers and the size and shape of the excitation volume. A qualitative explanation is provided, illustrating the dramatic difference from the spatial coherence of a conventional laser. This work demonstrates that random lasers can be controlled to provide intense, spatially incoherent emission for applications in which spatial cross talk or speckle limit performance.

physics.optics↗