arXiv subjects

Branka Vucetic

Publications and source records attributed to Branka Vucetic.

At least 91 records · Page 5Linked to original sources

arXiv2021

Anytime Control under Practical Communication Model

We investigate a novel anytime control algorithm for wireless networked control with random dropouts. The controller computes sequences of tentative future control commands using time-varying (Markovian) computational resources. The sensor-controller and controller-actuator channel states are spatial- and time-correlated, and are modeled as a multi-state Markov process. To compensate for the effect of packet dropouts, a dual-buffer mechanism is proposed. We develop a novel cycle-cost-based approach to obtain the stability conditions on the nonlinear plant, controller, network and computational resources.

cs.IT↗

arXiv2021

Non-orthogonal HARQ for URLLC Design and Analysis

The fifth-generation (5G) of mobile standards is expected to provide ultra-reliability and low-latency communications (URLLC) for various applications and services, such as online gaming, wireless industrial control, augmented reality, and self driving cars. Meeting the contradictory requirements of URLLC, i.e., ultra-reliability and low-latency, is considered to be very challenging, especially in bandwidth-limited scenarios. Most communication strategies rely on hybrid automatic repeat request (HARQ) to improve reliability at the expense of increased packet latency due to the retransmission of failing packets. To guarantee high-reliability and very low latency simultaneously, we enhance HARQ retransmission mechanism to achieve reliability with guaranteed packet level latency and in-time delivery. The proposed non-orthogonal HARQ (N-HARQ) utilizes non-orthogonal sharing of time slots for conducting retransmission. The reliability and delay analysis of the proposed N-HARQ in the finite block length (FBL) regime shows very high performance gain in packet delivery delay over conventional HARQ in both additive white Gaussian noise (AWGN) and Rayleigh fading channels. We also propose an optimization framework to further enhance the performance of N-HARQ for single and multiple retransmission cases.

cs.NI↗

arXiv2021

A Revisit to Ordered Statistics Decoding: Distance Distribution and Decoding Rules

This paper revisits the ordered statistics decoding (OSD). It provides a comprehensive analysis of the OSD algorithm by characterizing the statistical properties, evolution and the distribution of the Hamming distance and weighted Hamming distance from codeword estimates to the received sequence in the reprocessing stages of the OSD algorithm. We prove that the Hamming distance and weighted Hamming distance distributions can be characterized as mixture models capturing the decoding error probability and code weight enumerator. Simulation and numerical results show that our proposed statistical approaches can accurately describe the distance distributions. Based on these distributions and with the aim to reduce the decoding complexity, several techniques, including stopping rules and discarding rules, are proposed, and their decoding error performance and complexity are accordingly analyzed. Simulation results for decoding various eBCH codes demonstrate that the proposed techniques can significantly reduce the decoding complexity with a negligible loss in the decoding error performance.

cs.IT↗

arXiv2021

Optimizing Information Freshness in Two-Hop Status Update Systems under a Resource Constraint

In this paper, we investigate the age minimization problem for a two-hop relay system, under a resource constraint on the average number of forwarding operations at the relay. We first design an optimal policy by modelling the considered scheduling problem as a constrained Markov decision process (CMDP) problem. Based on the observed multi-threshold structure of the optimal policy, we then devise a low-complexity double threshold relaying (DTR) policy with only two thresholds, one for relay's AoI and the other one for the age gain between destination and relay. We derive approximate closed-form expressions of the average AoI at the destination, and the average number of forwarding operations at the relay for the DTR policy, by modelling the tangled evolution of age at relay and destination as a Markov chain (MC). Numerical results validate all the theoretical analysis, and show that the low-complexity DTR policy can achieve near optimal performance compared with the optimal CMDP-based policy. Moreover, the relay should always consider the threshold for its local age to maintain a low age at the destination. When the resource constraint is relatively tight, it further needs to consider the threshold on the age gain to ensure that only those packets that can decrease destination's age dramatically will be forwarded.

cs.IT↗

arXiv2021

Knowledge-Assisted Deep Reinforcement Learning in 5G Scheduler Design: From Theoretical Framework to Implementation

In this paper, we develop a knowledge-assisted deep reinforcement learning (DRL) algorithm to design wireless schedulers in the fifth-generation (5G) cellular networks with time-sensitive traffic. Since the scheduling policy is a deterministic mapping from channel and queue states to scheduling actions, it can be optimized by using deep deterministic policy gradient (DDPG). We show that a straightforward implementation of DDPG converges slowly, has a poor quality-of-service (QoS) performance, and cannot be implemented in real-world 5G systems, which are non-stationary in general. To address these issues, we propose a theoretical DRL framework, where theoretical models from wireless communications are used to formulate a Markov decision process in DRL. To reduce the convergence time and improve the QoS of each user, we design a knowledge-assisted DDPG (K-DDPG) that exploits expert knowledge of the scheduler design problem, such as the knowledge of the QoS, the target scheduling policy, and the importance of each training sample, determined by the approximation error of the value function and the number of packet losses. Furthermore, we develop an architecture for online training and inference, where K-DDPG initializes the scheduler off-line and then fine-tunes the scheduler online to handle the mismatch between off-line simulations and non-stationary real-world systems. Simulation results show that our approach reduces the convergence time of DDPG significantly and achieves better QoS than existing schedulers (reducing 30% ~ 50% packet losses). Experimental results show that with off-line initialization, our approach achieves better initial QoS than random initialization and the online fine-tuning converges in few minutes.

eess.SP↗

arXiv2021

Over-the-Air Computation with Spatial-and-Temporal Correlated Signals

Over-the-air computation (AirComp) leveraging the superposition property of wireless multiple-access channel (MAC), is a promising technique for effective data collection and computation of large-scale wireless sensor measurements in Internet of Things applications. Most existing work on AirComp only considered computation of spatial-and-temporal independent sensor signals, though in practice different sensor measurement signals are usually correlated. In this letter, we propose an AirComp system with spatial-and-temporal correlated sensor signals, and formulate the optimal AirComp policy design problem for achieving the minimum computation mean-squared error (MSE). We develop the optimal AirComp policy with the minimum computation MSE in each time step by utilizing the current and the previously received signals. We also propose and optimize a low-complexity AirComp policy in closed form with the performance approaching to the optimal policy.

cs.IT↗

arXiv2021

A Tutorial on Ultra-Reliable and Low-Latency Communications in 6G: Integrating Domain Knowledge into Deep Learning

As one of the key communication scenarios in the 5th and also the 6th generation (6G) of mobile communication networks, ultra-reliable and low-latency communications (URLLC) will be central for the development of various emerging mission-critical applications. State-of-the-art mobile communication systems do not fulfill the end-to-end delay and overall reliability requirements of URLLC. In particular, a holistic framework that takes into account latency, reliability, availability, scalability, and decision making under uncertainty is lacking. Driven by recent breakthroughs in deep neural networks, deep learning algorithms have been considered as promising ways of developing enabling technologies for URLLC in future 6G networks. This tutorial illustrates how domain knowledge (models, analytical tools, and optimization frameworks) of communications and networking can be integrated into different kinds of deep learning algorithms for URLLC. We first provide some background of URLLC and review promising network architectures and deep learning frameworks for 6G. To better illustrate how to improve learning algorithms with domain knowledge, we revisit model-based analytical tools and cross-layer optimization frameworks for URLLC. Following that, we examine the potential of applying supervised/unsupervised deep learning and deep reinforcement learning in URLLC and summarize related open problems. Finally, we provide simulation and experimental results to validate the effectiveness of different learning algorithms and discuss future directions.

eess.SP↗

arXiv2020

Task Offloading for Large-Scale Asynchronous Mobile Edge Computing: An Index Policy Approach

Mobile-edge computing (MEC) offloads computational tasks from wireless devices to network edge, and enables real-time information transmission and computing. Most existing work concerns a small-scale synchronous MEC system. In this paper, we focus on a large-scale asynchronous MEC system with random task arrivals, distinct workloads, and diverse deadlines. We formulate the offloading policy design as a restless multi-armed bandit (RMAB) to maximize the total discounted reward over the time horizon. However, the formulated RMAB is related to a PSPACE-hard sequential decision-making problem, which is intractable. To address this issue, by exploiting the Whittle index (WI) theory, we rigorously establish the WI indexability and derive a scalable closed-form solution. Consequently, in our WI policy, each user only needs to calculate its WI and report it to the BS, and the users with the highest indices are selected for task offloading. Furthermore, when the task completion ratio becomes the focus, the shorter slack time less remaining workload (STLW) priority rule is introduced into the WI policy for performance improvement. When the knowledge of user offloading energy consumption is not available prior to the offloading, we develop Bayesian learning-enabled WI policies, including maximum likelihood estimation, Bayesian learning with conjugate prior, and prior-swapping techniques. Simulation results show that the proposed policies significantly outperform the other existing policies.

cs.IT↗

arXiv2020

Performance Analysis and Optimization of NOMA with HARQ for Short Packet Communications in Massive IoT

In this paper, we consider the massive non-orthogonal multiple access (NOMA) with hybrid automatic repeat request (HARQ) for short packet communications. To reduce the latency, each user can perform one re-transmission provided that the previous packet was not decoded successfully. The system performance is evaluated for both coordinated and uncoordinated transmissions. We first develop a Markov model (MM) to analyze the system dynamics and characterize the packet error rate (PER) and throughput of each user in the coordinated scenario. The power levels are then optimized for two scenarios, including the power constrained and reliability constrained scenarios. A simple yet efficient dynamic cell planning is also designed for the uncoordinated scenario. Numerical results show that both coordinated and uncoordinated NOMA-HARQ with a limited number of retransmissions can achieve the desired level of reliability with the guaranteed latency using a proper power control strategy. Results also show that NOMA-HARQ achieves a higher throughput compared to the orthogonal multiple access scheme with HARQ under the same average received power constraint at the base station.

eess.SP↗

arXiv2020

Deep Residual Learning-Assisted Channel Estimation in Ambient Backscatter Communications

Channel estimation is a challenging problem for realizing efficient ambient backscatter communication (AmBC) systems. In this letter, channel estimation in AmBC is modeled as a denoising problem and a convolutional neural network-based deep residual learning denoiser (CRLD) is developed to directly recover the channel coefficients from the received noisy pilot signals. To simultaneously exploit the spatial and temporal features of the pilot signals, a novel three-dimension (3D) denoising block is specifically designed to facilitate denoising in CRLD. In addition, we provide theoretical analysis to characterize the properties of the proposed CRLD. Simulation results demonstrate that the performance of the proposed method approaches the performance of the optimal minimum mean square error (MMSE) estimator with perfect statistical channel correlation matrix.

cs.IT↗

arXiv2020

Deep Multi-Task Learning for Cooperative NOMA: System Design and Principles

Envisioned as a promising component of the future wireless Internet-of-Things (IoT) networks, the non-orthogonal multiple access (NOMA) technique can support massive connectivity with a significantly increased spectral efficiency. Cooperative NOMA is able to further improve the communication reliability of users under poor channel conditions. However, the conventional system design suffers from several inherent limitations and is not optimized from the bit error rate (BER) perspective. In this paper, we develop a novel deep cooperative NOMA scheme, drawing upon the recent advances in deep learning (DL). We develop a novel hybrid-cascaded deep neural network (DNN) architecture such that the entire system can be optimized in a holistic manner. On this basis, we construct multiple loss functions to quantify the BER performance and propose a novel multi-task oriented two-stage training method to solve the end-to-end training problem in a self-supervised manner. The learning mechanism of each DNN module is then analyzed based on information theory, offering insights into the proposed DNN architecture and its corresponding training method. We also adapt the proposed scheme to handle the power allocation (PA) mismatch between training and inference and incorporate it with channel coding to combat signal deterioration. Simulation results verify its advantages over orthogonal multiple access (OMA) and the conventional cooperative NOMA scheme in various scenarios.

cs.IT↗

arXiv2020

Optimizing Information Freshness via Multiuser Scheduling with Adaptive NOMA/OMA

This paper considers a wireless network with a base station (BS) conducting timely status updates to multiple clients via adaptive non-orthogonal multiple access (NOMA)/orthogonal multiple access (OMA). Specifically, the BS is able to adaptively switch between NOMA and OMA for the downlink transmission to optimize the information freshness of the network, characterized by the Age of Information (AoI) metric. If the BS chooses OMA, it can only serve one client within each time slot and should decide which client to serve; if the BS chooses NOMA, it can serve more than one client at the same time and needs to decide the power allocated to the served clients. For the simple two-client case, we formulate a Markov Decision Process (MDP) problem and develop the optimal policy for the BS to decide whether to use NOMA or OMA for each downlink transmission based on the instantaneous AoI of both clients. The optimal policy is shown to have a switching-type property with obvious decision switching boundaries. A near-optimal policy with lower computation complexity is also devised. For the more general multi-client scenario, inspired by the proposed near-optimal policy, we formulate a nonlinear optimization problem to determine the optimal power allocated to each client by maximizing the expected AoI drop of the network in each time slot. We resolve the formulated problem by approximating it as a convex optimization problem. We also derive the upper bound of the gap between the approximate convex problem and the original nonlinear, nonconvex problem. Simulation results validate the effectiveness of the adopted approximation. The performance of the adaptive NOMA/OMA scheme by solving the convex optimization is shown to be close to that of max-weight policy solved by exhaustive search...

cs.IT↗

arXiv2020

On the Latency, Rate and Reliability Tradeoff in Wireless Networked Control Systems for IIoT

Wireless networked control systems (WNCSs) provide a key enabling technique for Industry Internet of Things (IIoT). However, in the literature of WNCSs, most of the research focuses on the control perspective, and has considered oversimplified models of wireless communications which do not capture the key parameters of a practical wireless communication system, such as latency, data rate and reliability. In this paper, we focus on a WNCS, where a controller transmits quantized and encoded control codewords to a remote actuator through a wireless channel, and adopt a detailed model of the wireless communication system, which jointly considers the inter-related communication parameters. We derive the stability region of the WNCS. If and only if the tuple of the communication parameters lies in the region, the average cost function, i.e., a performance metric of the WNCS, is bounded. We further obtain a necessary and sufficient condition under which the stability region is $n$-bounded, where $n$ is the control codeword blocklength. We also analyze the average cost function of the WNCS. Such analysis is non-trivial because the finite-bit control-signal quantizer introduces a non-linear and discontinuous quantization function which makes the performance analysis very difficult. We derive tight upper and lower bounds on the average cost function in terms of latency, data rate and reliability. Our analytical results provide important insights into the design of the optimal parameters to minimize the average cost within the stability region.

cs.IT↗

arXiv2020

Wireless Feedback Control with Variable Packet Length for Industrial IoT

The paper considers a wireless networked control system (WNCS), where a controller sends packets carrying control information to an actuator through a wireless channel to control a physical process for industrial-control applications. In most of the existing work on WNCSs, the packet length for transmission is fixed. However, from the channel-encoding theory, if a message is encoded into a longer codeword, its reliability is improved at the expense of longer delay. Both delay and reliability have great impact on the control performance. Such a fundamental delay-reliability tradeoff has rarely been considered in WNCSs. In this paper, we propose a novel WNCS, where the controller adaptively changes the packet length for control based on the current status of the physical process. We formulate a decision-making problem and find the optimal variable-length packet-transmission policy for minimizing the long-term average cost of the WNCSs. We derive a necessary and sufficient condition on the existence of the optimal policy in terms of the transmission reliabilities with different packet lengths and the control system parameter.

cs.IT↗

arXiv2020

Physical Layer Authentication for Non-Coherent Massive SIMO-Enabled Industrial IoT Communications

Achieving ultra-reliable, low-latency and secure communications is essential for realizing the industrial Internet of Things (IIoT). Non-coherent massive multiple-input multiple-output (MIMO) is one of promising techniques to fulfill ultra-reliable and low-latency requirements. In addition, physical layer authentication (PLA) technology is particularly suitable for secure IIoT communications thanks to its low-latency attribute. A PLA method for non-coherent massive single-input multiple-output (SIMO) IIoT communication systems is proposed in this paper. This method realizes PLA by embedding an authentication signal (tag) into a message signal, referred to as "message-based tag embedding". It is different from traditional PLA methods utilizing uniform power tags. We design the optimal tag embedding and optimize the power allocation between the message and tag signals to characterize the trade-off between the message and tag error performance. Numerical results show that the proposed message-based tag embedding PLA method is more accurate than the traditional uniform tag embedding method which has an unavoidable tag error floor close to 10%.

eess.SP↗

arXiv2020

Over-the-Air Computation Systems: Optimal Design with Sum-Power Constraint

Over-the-air computation (AirComp), which leverages the superposition property of wireless multiple-access channel (MAC) and the mathematical tool of function representation, has been considered as a promising technique for effective collection and computation of massive sensor data in wireless Big Data applications. In most of the existing work on AirComp, optimal system-parameter design is commonly considered under the peak-power constraint of each sensor. In this paper, we propose an optimal transmitter-receiver (Tx-Rx) parameter design problem to minimize the computation mean-squared error (MSE) of an AirComp system under the sum-power constraint of the sensors. We solve the non-convex problem and obtain a closed-form solution. Also, we investigate another problem that minimizes the sum power of the sensors under the constraint of computation MSE. Our results show that in both of the problems, the sensors with poor and good channel conditions should use less power than the ones with moderate channel conditions.

cs.IT↗

arXiv2020

Over-the-Air Computation Systems: Optimization, Analysis and Scaling Laws

For future Internet of Things (IoT)-based Big Data applications (e.g., smart cities/transportation), wireless data collection from ubiquitous massive smart sensors with limited spectrum bandwidth is very challenging. On the other hand, to interpret the meaning behind the collected data, it is also challenging for edge fusion centers running computing tasks over large data sets with limited computation capacity. To tackle these challenges, by exploiting the superposition property of a multiple-access channel and the functional decomposition properties, the recently proposed technique, over-the-air computation (AirComp), enables an effective joint data collection and computation from concurrent sensor transmissions. In this paper, we focus on a single-antenna AirComp system consisting of $K$ sensors and one receiver (i.e., the fusion center). We consider an optimization problem to minimize the computation mean-squared error (MSE) of the $K$ sensors' signals at the receiver by optimizing the transmitting-receiving (Tx-Rx) policy, under the peak power constraint of each sensor. Although the problem is not convex, we derive the computation-optimal policy in closed form. Also, we comprehensively investigate the ergodic performance of AirComp systems in terms of the average computation MSE and the average power consumption under Rayleigh fading channels with different Tx-Rx policies. For the computation-optimal policy, we prove that its average computation MSE has a decay rate of $O(1/\sqrt{K})$, and our numerical results illustrate that the policy also has a vanishing average power consumption with the increasing $K$, which jointly show the computation effectiveness and the energy efficiency of the policy with a large number of sensors.

cs.IT↗

arXiv2020

Reconfigurable Intelligent Surface (RIS)-Enhanced Two-Way OFDM Communications

In this paper, we focus on the reconfigurable intelligent surface (RIS)-enhanced two-way device-to-device (D2D) multi-pair orthogonal-frequency-division-multiplexing (OFDM) communication systems. Specifically, we maximize the minimum bidirectional weighted sum-rate by jointly optimizing the sub-band allocation, the power allocation and the discrete phase shift (PS) design at the RIS. To tackle the main difficulty of the non-convex PS design at the RIS, we firstly formulate a semi-definite relaxation problem and further devise a low-complexity solution for the PS design by leveraging the projected sub-gradient method. We demonstrate the desirable performance gain for the proposed designs through numerical results.

eess.SP↗