arXiv subjects

Brent E. Little

Publications and source records attributed to Brent E. Little.

At least 37 records · Page 2Linked to original sources

arXiv2020

Quantum key distribution with dissipative Kerr soliton generated by on-chip microresonators

Quantum key distribution (QKD) can distribute symmetric key bits between remote legitimate users with the guarantee of quantum mechanics principles. For practical applications, the compact and robust photonic components for QKD are essential, and there are increasing attention to integrate the source, detector and modulators on a photonic chip. However, the massive and parallel QKD based on wavelength multiplexing are still challenge, due to the limited coherent light sources on the chip. Here, we introduce the Kerr dissipative soliton in a microresonator, which provides the locked coherent frequency comb with 49GHz frequency spacing, for QKD. We demonstrate the parallel QKD by demulplexing the coherent comb lines form the soliton, and showing the potential of Gbps secret key rate if the hundreds of channels covering C and L bands are fully exploited. The demonstrated soliton based QKD architecture are compatible with the efforts of quantum photonic integrated circuits, which are compact, robust and low-cost, and provides a competitive platform of practical QKD chip.

quant-ph↗

arXiv2020

Photonic radio frequency and microwave integration based on a multi-wavelength 49GHz Kerr microcomb source

We demonstrate a photonic RF integrator based on an integrated soliton crystal microcomb source. By multicasting and progressively delaying the input RF signal using a transversal structure, the input RF signal is integrated discretely. Up to 81 wavelengths are provided by the microcomb source, which enable a large integration time window of 6.8 ns, together with a time resolution as fast as 84 ps. We perform signal integration of a diverse range of input RF signals including Gaussian pulses with varying time widths, dual pulses with varying time intervals and a square waveform. The experimental results show good agreement with theory. These results verify our microcomb-based integrator as a competitive approach for RF signal integration with high performance and potentially lower cost and footprint.

physics.app-ph↗

arXiv2020

Long distance measurement using single soliton microcomb

Dispersive interferometry (DPI) takes a major interest in optical frequency comb (OFC) based long distance laser-based light detection and ranging (LIDAR) for the merits of strong anti-interference ability and long coherent length. However, the mismatch between the repetition rate of OFC and the resolution of optical spectrum acquisition system induces a large dead-zone which is a major obstacle for practical applications. Here, a new DPI LIDAR on the strength of high-repetition-rate soliton microcomb is demonstrated, which reaches a minimum Allan deviation of 27 nm for an outdoor 1179 m ranging experiment. The proposed scheme approaches a compact, high-accuracy, and none-dead-zone long distance ranging system, opening up new opportunities for emerging applications of frontier scientific researches and advanced manufacturing.

physics.ins-det↗

arXiv2020

Single photonic perceptron based on a soliton crystal Kerr microcomb for high-speed, scalable, optical neural networks

Optical artificial neural networks (ONNs), analog computing hardware tailored for machine learning, have significant potential for ultra-high computing speed and energy efficiency. We propose a new approach to architectures for ONNs based on integrated Kerr micro-comb sources that is programmable, highly scalable and capable of reaching ultra-high speeds. We experimentally demonstrate the building block of the ONN, a single neuron perceptron, by mapping synapses onto 49 wavelengths of a micro-comb to achieve a high single-unit throughput of 11.9 Giga-FLOPS at 8 bits per FLOP, corresponding to 95.2 Gbps. We test the perceptron on simple standard benchmark datasets, handwritten-digit recognition and cancer-cell detection, achieving over 90% and 85% accuracy, respectively. This performance is a direct result of the record small wavelength spacing (49GHz) for a coherent integrated microcomb source, which results in an unprecedented number of wavelengths for neuromorphic optics. Finally, we propose an approach to scaling the perceptron to a deep learning network using the same single micro-comb device and standard off-the-shelf telecommunications technology, for high-throughput operation involving full matrix multiplication for applications such as real-time massive data processing for unmanned vehicle and aircraft tracking.

physics.optics↗

arXiv2020

Optical data transmission at 44Tb/s and 10 bits/s/Hz over the C-band with standard fibre and a single micro-comb source

Micro-combs [1 - 4], optical frequency combs generated by integrated micro-cavity resonators, offer the full potential of their bulk counterparts [5,6], but in an integrated footprint. The discovery of temporal soliton states (DKS dissipative Kerr solitons) [4,7-11] as a means of modelocking microcombs has enabled breakthroughs in many fields including spectroscopy [12,13], microwave photonics [14], frequency synthesis [15], optical ranging [16,17], quantum sources [18,19], metrology [20,21] and more. One of their most promising applications has been optical fibre communications where they have enabled massively parallel ultrahigh capacity multiplexed data transmission [22,23]. Here, by using a new and powerful class of microcomb called soliton crystals [11], we achieve unprecedented data transmission over standard optical fibre using a single integrated chip source. We demonstrate a line rate of 44.2 Terabits per second using the telecommunications C band at 1550nm with a spectral efficiency, a critically important performance metric, of 10.4 bits/s/Hz. Soliton crystals exhibit robust and stable generation and operation as well as a high intrinsic efficiency that, together with a low soliton microcomb spacing of 48.9 GHz enable the use of a very high coherent data modulation format of 64 QAM (quadrature amplitude modulated). We demonstrate error free transmission over 75 km of standard optical fibre in the laboratory as well as in a field trial over an installed metropolitan optical fibre network. These experiments were greatly aided by the ability of the soliton crystals to operate without stabilization or feedback control. This work demonstrates the capability of optical soliton crystal microcombs to perform in demanding and practical optical communications networks.

physics.app-ph↗

arXiv2020

Enhanced four-wave-mixing with 2D layered graphene oxide films integrated with CMOS compatible micro-ring resonators

Layered 2D graphene oxide (GO) films are integrated with microring resonators (MRRs) to experimentally demonstrate enhanced nonlinear optics in the form of four wave mixing (FWM). Both uniformly coated and patterned GO films are integrated on CMOS compatible doped silica MRRs using a large area, transfer free, layer by layer GO coating method together with photolithography and lift off processes, yielding precise control of the film thickness, placement, and coating length. The high Kerr nonlinearity and low loss of the GO films combined with the strong light matter interaction within the MRRs results in a significant improvement in the FWM efficiency in the hybrid MRRs. Detailed FWM measurements are performed at different pump powers and resonant wavelengths for the uniformly coated MRRs with 1 to 5 layers of GO as well as the patterned devices with 10 to 50 layers of GO. The experimental results show good agreement with theory, achieving up to 7.6 dB enhancement in the FWM conversion efficiency (CE) for an MRR uniformly coated with 1 layer of GO and 10.3 dB for a patterned device with 50 layers of GO. By fitting the measured CE as a function of pump power for devices with different numbers of GO layers, we also extract the dependence of the third-order nonlinearity on layer number and pump power, revealing interesting physical insights about the evolution of the layered GO films from 2D monolayers to quasi bulk like behavior. These results confirm the high nonlinear optical performance of integrated photonic resonators incorporated with 2D layered GO films.

physics.optics↗

arXiv2020

Optical Kerr soliton crystal microcomb source for RF photonic fractional differentiation

We report a photonic radio frequency (RF) fractional differentiator based on an integrated Kerr micro-comb source. The micro-comb source has a free spectral range (FSR) of 49 GHz, generating a large number of comb lines that serve as a high-performance multi-wavelength source for the differentiator. By programming and shaping the comb lines according to calculated tap weights, arbitrary fractional orders ranging from 0.15 to 0.90 are achieved over a broad RF operation bandwidth of 15.49 GHz. We experimentally characterize the frequency-domain RF amplitude and phase responses as well as the temporal responses with a Gaussian pulse input. The experimental results show good agreement with theory, confirming the effectiveness of our approach towards high-performance fractional differentiators featuring broad processing bandwidth, high reconfigurability, and potentially greatly reduced size and cost.

physics.app-ph↗

arXiv2019

Microwave photonic fractional Hilbert transformer with an integrated optical soliton crystal micro-comb

We report a photonic microwave and RF fractional Hilbert transformer based on an integrated Kerr micro-comb source. The micro-comb source has a free spectral range (FSR) of 50GHz, generating a large number of comb lines that serve as a high-performance multi-wavelength source for the transformer. By programming and shaping the comb lines according to calculated tap weights, we achieve both arbitrary fractional orders and a broad operation bandwidth. We experimentally characterize the RF amplitude and phase response for different fractional orders and perform system demonstrations of real-time fractional Hilbert transforms. We achieve a phase ripple of < 0.15 rad within the 3-dB pass-band, with bandwidths ranging from 5 to 9 octaves, depending on the order. The experimental results show good agreement with theory, confirming the effectiveness of our approach as a new way to implement high-performance fractional Hilbert transformers with broad processing bandwidth, high reconfigurability, and greatly reduced size and complexity.

physics.app-ph↗

arXiv2019

Microwave Q-band oscillator at 49GHz for broadband frequency conversion based on a Kerr optical soliton crystal micro-comb

We report a broadband microwave frequency converter based on a coherent Kerr optical micro-comb generated by an integrated micro-ring resonator. The coherent micro-comb displays features that are consistent with soliton crystal dynamics with an FSR of 48.9GHz. We use this to demonstrate a high-performance millimeter-wave local oscillator at 48.9GHz in the Q-band for microwave frequency conversion. We experimentally verify the microwave performance up to 40 GHz, achieving a ratio of 6.8 dB between output RF power and IF power and a spurious suppression ratio of > 43.5 dB. The experimental results show good agreement with theory and verify the effectiveness of microwave frequency converters based on coherent optical micro-combs, with the ability to achieve reduced size, complexity, and potential cost.

physics.app-ph↗

arXiv2019

Integrated polarizers based on graphene oxide in waveguides and ring resonators

Integrated waveguide polarizers and polarization-selective micro-ring resonators (MRRs) incorporated with graphene oxide (GO) films are experimentally demonstrated. CMOS-compatible doped silica waveguides and MRRs with both uniformly coated and patterned GO films are fabricated based on a large-area, transfer-free, layer-by-layer GO coating method that yields precise control of the film thickness. Photolithography and lift-off processes are used to achieve photolithographic patterning of GO films with precise control of the placement and coating length. Detailed measurements are performed to characterize the performance of the devices versus GO film thickness and coating length as a function of polarization, wavelength and power. A high polarization dependent loss of ~53.8 dB is achieved for the waveguide coated with 2-mm-long patterned GO films. It is found that intrinsic film material loss anisotropy dominates the performance for less than 20 layers whereas polarization dependent mode overlap dominates for thicker layers. For the MRRs, the GO coating length is reduced to 50 microns, yielding a ~ 8.3-dB polarization extinction ratio between TE and TM resonances. These results offer interesting physical insights and trends of the layered GO films and demonstrate the effectiveness of introducing GO films into photonic integrated devices to realize high-performance polarization selective components.

physics.optics↗

arXiv2019

Laser Cavity-Soliton Micro-Combs

The field of micro-cavity based frequency combs, or 'micro-combs'[1,2], has recently witnessed many fundamental breakthroughs[3-19] enabled by the discovery of temporal cavity-solitons, self-localised waves sustained by a background of radiation usually containing 95% of the total power[20]. Simple methods for their efficient generation and control are currently researched to finally establish micro-combs as out-of-the-lab widespread tools[21]. Here we demonstrate micro-comb laser cavity-solitons, an intrinsically highly-efficient, background free class of solitary waves. Laser cavity-solitons have underpinned key breakthroughs in semiconductor lasers[22,23] and photonic memories[24-26]. By merging their properties with the physics of both micro-resonators[1,2] and multi-mode systems[27], we provide a new paradigm for the generation and control of self-localised pulses in micro-cavities. We demonstrate 50 nm wide soliton combs induced with average powers one order of magnitude lower than those typically required by state-of-the-art approaches[26]. Furthermore, we can tune the repetition-rate to well over a megahertz with no-active feedback.

physics.optics↗

arXiv2018

Graphene oxide for enhanced nonlinear optics in low and high index contrast waveguides and nanowires

We demonstrate enhanced four-wave mixing (FWM) in doped silica waveguides integrated with graphene oxide (GO) layers. Owing to strong mode overlap between the integrated waveguides and GO films that have a high Kerr nonlinearity and low loss, the FWM efficiency of the hybrid integrated waveguides is significantly improved. We perform FWM measurements for different pump powers, wavelength detuning, GO coating lengths, and number of GO layers. Our experimental results show good agreement with theory, achieving up to ~9.5-dB enhancement in the FWM conversion efficiency for a 1.5-cm-long waveguide integrated with 2 layers of GO. We show theoretically that for different waveguide geometries an enhancement in FWM efficiency of ~ 20 dB can be obtained in the doped silica waveguides, and more than 30 dB in silicon nanowires and slot waveguides. This demonstrates the effectiveness of introducing GO films into integrated photonic devices in order to enhance the performance of nonlinear optical processes.

physics.optics↗

arXiv2018

Deterministic generation and switching of dissipative Kerr soliton in a thermally controlled micro-resonator

Dissipative Kerr solitons (DKSs) in the high-Q micro-resonator corresponds to self-organized short pulse in time domain via double balance between dispersion and Kerr nonlinearity, as well as cavity loss and parametric gain. In this paper, we first experimentally demonstrate deterministic generation and switching of DKSs in a thermally controlled micro-ring resonator based on high-index doped silica glass platform. In our scheme, an auxiliary laser is introduced to timely balance the intra-cavity heat fluctuation. By decreasing the operating temperature through a thermo-electric cooler, soliton crystal is firstly generated, then increasing the temperature, DKSs switching and single soliton are robustly accessed, which is independent of the tuning speed. During the switching process, varieties of DKSs are identified by tens of featured discrete soliton-steps, which is favorable for study of on-chip soliton interactions and nonlinear applications.

physics.optics↗

arXiv2018

Tunable RF and microwave photonic sideband generator based on cascaded 49GHz and 200GHz integrated ring resonators

We demonstrate a continuously RF tunable orthogonally polarized optical single sideband (OP-OSSB) generator based on dual cascaded micro-ring resonators. By splitting the input double sideband signal into an orthogonally polarized carrier and lower sideband via TE- and TM-polarized MRRs, an OP-OSSB signal is generated. A large tuning range of the optical carrier to sideband ratio of up to 57.3 dB is achieved by adjusting the polarization angle of the input light. The operation RF frequency of the OP-OSSB generator can be continuously tuned with a 21.4 GHz range via independent thermal control of the two MRRs. Our device represents a competitive approach towards OP-OSSB generation with wideband tunable RF operation, and is promising for photonic RF signal transmission and processing in radar and communication systems.

physics.app-ph↗

arXiv2018

Emerging applications of integrated optical microcombs for analogue RF and microwave photonic signal processing

We review new applications of integrated microcombs in RF and microwave photonic systems. We demonstrate a wide range of powerful functions including a photonic intensity high order and fractional differentiators, optical true time delays, advanced filters, RF channelizer and other functions, based on a Kerr optical comb generated by a compact integrated microring resonator, or microcomb. The microcomb is CMOS compatible and contains a large number of comb lines, which can serve as a high performance multiwavelength source for the transversal filter, thus greatly reduce the cost, size, and complexity of the system. The operation principle of these functions is theoretically analyzed, and experimental demonstrations are presented.

physics.app-ph↗

arXiv2018

Optical wavelength conversion of high bandwidth phase-encoded signals in a high FOM 50cm CMOS compatible waveguide

We demonstrate wavelength conversion of QAM signals including 32GBd QPSK and 10GBd 16QAM in a 50cm long high index doped glass spiral waveguide. The quality of the generated idlers over a 10nm bandwidth is sufficient to achieve a BER performance below the HD FEC threshold (less than 3.8 x 10-3), with an OSNR penalty of less than 0.3 dB compared to the original signal. Our results confirm that this is a promising platform for nonlinear optical signal processing, a result of both very low linear propagation loss (less than 0.07 dB/cm) and the large material bandgap that ensures negligible nonlinear loss at telecom wavelengths.

physics.app-ph↗

arXiv2018

Photonic single sideband RF generator based on an integrated optical micro-ring resonator

We demonstrate narrowband orthogonally polarized optical RF single sideband generation as well as dual-channel equalization based on an integrated dual-polarization-mode high-Q microring resonator. The device operates in the optical communications band and enables narrowband RF operation at either 16.6 GHz or 32.2 GHz, determined by the free spectral range and TE/TM mode interval in the resonator. We achieve a very large dynamic tuning range of over 55 dB for both the optical carrier-to-sideband ratio and the dual-channel RF equalization.

eess.SP↗

arXiv2018

A Radio Frequency Channelizer based on Cascaded Integrated Micro-ring Resonator Optical Comb Sources and Filters

We report a broadband RF channelizer based on an integrated optical frequency Kerr micro-comb source, with an RF channelizing bandwidth of 90 GHz, a high RF spectral slice resolution of 1.04 GHz, and experimentally verify the RF performance up to 19 GHz. This approach to realizing RF channelizers offers reduced complexity, size, and potential cost for a wide range of applications to microwave signal detection.

physics.app-ph↗