arXiv subjects

Brian P. Tighe

Publications and source records attributed to Brian P. Tighe.

At least 19 recordsLinked to original sources

arXiv2026

Proximity to Jamming Governs Acoustic Attenuation in Damped Packings

We use particle-based numerical simulations to address a longstanding question regarding the origins of the linear frequency dependence of attenuation in fluid-saturated granular media. We study both the acoustic modes and wave propagation in damped, disordered particle packings. We calculate the damped vibrational modes of packings as a function of frequency, pressure, and grain-contact dissipation. The spatial structure and dissipation of these modes show a clear transition at a pressure-dependent critical frequency from viscous-like continuum behavior to more localized, scattering modes. We also measure how wavespeed and spatial attenuation rate depend on these same parameters. At the same critical frequency, wave propagation also shifts from coherent motion, where attenuation scales quadratically with frequency and linearly with contact damping, to much more incoherent particle-scale motion, where attenuation scales linearly with frequency and sublinearly with contact damping. All of these features, including the transition frequency, are consistent with a large collection of experimental data, which has not been explained by any framework based on grain-scale physics. We refer to this approach as ``Jammed-Network Scattering'' (JNS), and propose it as a grain-scale framework for understanding the acoustics of fluid-saturated granular media.

cond-mat.soft↗

arXiv2025

Jamming transition and normal modes of polydispersed soft particle packing

The jamming transition of soft particles characterized by narrow size distributions has been well studied by physicists. However, polydispersed systems are more relevant to engineering, and the influence of polydispersity on jamming phenomena is still unexplored. Here, we numerically investigate jamming transitions of polydispersed soft particles in two dimensions. We find that polydispersity strongly influences contact forces, local coordination, and the jamming transition density. In contrast, the critical scaling of pressure and elastic moduli is not affected by the particle size distribution. Consistent with this observation, we find that the vibrational density of states is also insensitive to the polydispersity. Our results suggest that, regardless of particle size distributions, both mechanical and vibrational properties of soft particle packings near jamming are governed by the distance to jamming.

cond-mat.soft↗

arXiv2020

Elasticity of Jammed Packings of Sticky Disks

Numerous soft materials jam into an amorphous solid at high packing fraction. This non-equilibrium phase transition is best understood in the context of a model system in which particles repel elastically when they overlap. Recently, however, it was shown that introducing any finite amount of attraction between particles changes the universality class of the transition. The properties of this new ``sticky jamming'' class remain almost entirely unexplored. We use molecular dynamics simulations and scaling analysis to determine the shear modulus, bulk modulus, and coordination of marginal solids close to the sticky jamming point. In each case, the behavior of the system departs sharply and qualitatively from the purely repulsive case.

cond-mat.soft↗

arXiv2019

Stress relaxation above and below the jamming transition

We numerically investigate stress relaxation in soft athermal disks to reveal critical slowing down when the system approaches the jamming point. The exponents describing the divergence of the relaxation time differ dramatically depending on whether the transition is approached from the jammed or unjammed phase. This contrasts sharply with conventional dynamic critical scaling scenarios, where a single exponent characterizes both sides. We explain this surprising difference in terms of the vibrational density of states (vDOS), which is a key ingredient of linear viscoelastic theory. The vDOS exhibits an extra slow mode that emerges below jamming, which we utilize to demonstrate the anomalous exponent below jamming.

cond-mat.soft↗

arXiv2019

A minimal-length approach unifies rigidity in under-constrained materials

We present a novel approach to understand geometric-incompatibility-induced rigidity in under-constrained materials, including sub-isostatic 2D spring networks and 2D and 3D vertex models for dense biological tissues. We show that in all these models a geometric criterion, represented by a minimal length $\bar\ell_\mathrm{min}$, determines the onset of prestresses and rigidity. This allows us to predict not only the correct scalings for the elastic material properties, but also the precise {\em magnitudes} for bulk modulus and shear modulus discontinuities at the rigidity transition as well as the magnitude of the Poynting effect. We also predict from first principles that the ratio of the excess shear modulus to the shear stress should be inversely proportional to the critical strain with a prefactor of three, and propose that this factor of three is a general hallmark of geometrically induced rigidity in under-constrained materials and could be used to distinguish this effect from nonlinear mechanics of single components in experiments. Lastly, our results may lay important foundations for ways to estimate $\bar\ell_\mathrm{min}$ from measurements of local geometric structure, and thus help develop methods to characterize large-scale mechanical properties from imaging data.

cond-mat.soft↗

arXiv2018

Non-local effects in inhomogeneous flows of soft athermal disks

We numerically investigate non-local effects on inhomogeneous flows of soft athermal disks close to but below their jamming transition. We employ molecular dynamics to simulate Kolmogorov flows, in which a sinusoidal flow profile with fixed wave number is externally imposed, resulting in a spatially inhomogeneous shear rate. We find that the resulting rheology is strongly wave number-dependent, and that particle migration, while present, is not sufficient to describe the resulting stress profiles within a conventional local model. We show that, instead, stress profiles can be captured with non-local constitutive relations that account for gradients to fourth order. Unlike nonlocal flow in yield stress fluids, we find no evidence of a diverging length scale.

cond-mat.soft↗

arXiv2018

Sticky Matter: Jamming and rigid cluster statistics with attractive particle interactions

While the large majority of theoretical and numerical studies of the jamming transition consider athermal packings of purely repulsive spheres, real complex fluids and soft solids generically display attraction between particles. By studying the statistics of rigid clusters in simulations of soft particles with an attractive shell, we present evidence for two distinct jamming scenarios. Strongly attractive systems undergo a continuous transition in which rigid clusters grow and ultimately diverge in size at a critical packing fraction. Purely repulsive and weakly attractive systems jam via a first order transition, with no growing cluster size. We further show that the weakly attractive scenario is a finite size effect, so that for any nonzero attraction strength, a sufficiently large system will fall in the strongly attractive universality class. We therefore expect attractive jamming to be generic in the laboratory and in nature.

cond-mat.soft↗

arXiv2018

Universal scaling of flow curves: comparison between experiments and simulations

Yield stress materials form an interesting class of materials that behave like solids at small stresses, but start to flow once a critical stress is exceeded. It has already been reported both in experimental and simulation work that flow curves of different yield stress materials can be scaled with the distance to jamming or with the confining pressure. However, different scaling exponents are found between experiments and simulations. In this paper we identify sources of this discrepancy. We numerically relate the volume fraction with the confining pressure and discuss the similarities and differences between rotational and oscillatory measurements. Whereas simulations are performed in the elastic response regime close to the jamming transition and with very small amplitudes to calculate the scaling exponents, these conditions are hardly possible to achieve experimentally. Measurements are often performed far away from the critical volume fraction and at large amplitudes. We show that these differences are the underlying reason for the different exponents for rescaling flow curves.

cond-mat.soft↗

arXiv2018

Viscous forces and bulk viscoelasticity near jamming

When weakly jammed packings of soft, viscous, non-Brownian spheres are probed mechanically, they respond with a complex admixture of elastic and viscous effects. While many of these effects are understood for specific, approximate models of the particles' interactions, there are a number of proposed force laws in the literature, especially for viscous interactions. We numerically measure the complex shear modulus $G^*$ of jammed packings for various viscous force laws that damp relative velocities between pairs of contacting particles or between a particle and the continuous fluid phase. We find a surprising sensitive dependence of $G^*$ on the viscous force law: the system may or may not display dynamic critical scaling, and the exponents describing how $G^*$ scales with frequency can change. We show that this sensitivity is closely linked to manner in which viscous damping couples to floppy-like, non-affine motion, which is prominent near jamming.

cond-mat.soft↗

arXiv2018

Normal stresses, contraction, and stiffening in sheared elastic networks

When elastic solids are sheared, a nonlinear effect named after Poynting gives rise to normal stresses or changes in volume. We provide a novel relation between the Poynting effect and the microscopic Grüneisen parameter, which quantifies how stretching shifts vibrational modes. By applying this relation to random spring networks, a minimal model for, e.g., biopolymer gels and solid foams, we find that networks contract or develop tension because they vibrate faster when stretched. The amplitude of the Poynting effect is sensitive to the network's linear elastic moduli, which can be tuned via its preparation protocol and connectivity. Finally, we show that the Poynting effect can be used to predict the finite strain scale where the material stiffens under shear.

cond-mat.soft↗

arXiv2017

Softening and Yielding of Soft Glassy Materials

Solids deform and fluids flow, but soft glassy materials, such as emulsions, foams, suspensions, and pastes, exhibit an intricate mix of solid and liquid-like behavior. While much progress has been made to understand their elastic (small strain) and flow (infinite strain) properties, such understanding is lacking for the softening and yielding phenomena that connect these asymptotic regimes. Here we present a comprehensive framework for softening and yielding of soft glassy materials, based on extensive numerical simulations of oscillatory rheological tests, and show that two distinct scenarios unfold depending on the material's packing density. For dense systems, there is a single, pressure-independent strain where the elastic modulus drops and the particle motion becomes diffusive. In contrast, for weakly jammed systems, a two-step process arises: at an intermediate softening strain, the elastic and loss moduli both drop down and then reach a new plateau value, whereas the particle motion becomes diffusive at the distinctly larger yield strain. We show that softening is associated with an extensive number of microscopic contact changes leading to a non-analytic rheological signature. Moreover, the scaling of the softening strain with pressure suggest the existence of a novel pressure scale above which softening and yielding coincide, and we verify the existence of this crossover scale numerically. Our findings thus evidence the existence of two distinct classes of soft glassy materials -- jamming dominated and dense -- and show how these can be distinguished by their rheological fingerprint.

cond-mat.soft↗

arXiv2017

On the Apparent Yield Stress in Non-Brownian Magnetorheological Fluids

We use simulations to probe the flow properties of dense two-dimensional magnetorheological fluids. Prior results from both experiments and simulations report that the shear stress $σ$ scales with strain rate $\dot γ$ as $σ\sim \dot γ^{1-Δ}$, with values of the exponent ranging between $2/3 <Δ\le 1$. However it remains unclear what properties of the system select the value of $Δ$, and in particular under what conditions the system displays a yield stress ($Δ= 1$). To address these questions, we perform simulations of a minimalistic model system in which particles interact via long ranged magnetic dipole forces, finite ranged elastic repulsion, and viscous damping. We find a surprising dependence of the apparent exponent $Δ$ on the form of the viscous force law. For experimentally relevant values of the volume fraction $ϕ$ and the dimensionless Mason number (which quantifies the competition between viscous and magnetic stresses), models using a Stokes-like drag force show $Δ\approx 0.75$ and no apparent yield stress. When dissipation occurs at the contact, however, a clear yield stress plateau is evident in the steady state flow curves. In either case, increasing $ϕ$ towards the jamming transition suffices to induce a yield stress. We relate these qualitatively distinct flow curves to clustering mechanisms at the particle scale. For Stokes-like drag, the system builds up anisotropic, chain-like clusters as the Mason number tends to zero (vanishing strain rate and/or high field strength). For contact damping, by contrast, there is a second clustering mechanism due to inelastic collisions.

cond-mat.soft↗

arXiv2017

Coarsening and mechanics in the bubble model for wet foams

Aqueous foams are an important model system that displays coarsening dynamics. Coarsening in dispersions and foams is well understood in the dilute and dry limits, where the gas fraction tends to zero and one, respectively. However, foams are known to undergo a jamming transition from a fluid-like to a solid-like state at an intermediate gas fraction,$ϕ_c$. Much less is known about coarsening dynamics in wet foams near jamming, and the link to mechanical response, if any, remains poorly understood. Here, we probe coarsening and mechanical response using numerical simulations of a variant of the Durian bubble model for wet foams. As in other coarsening systems we find a steady state scaling regime with an associated particle size distribution. We relate the time-rate of evolution of the coarsening process to the wetness of the foam and identify a characteristic coarsening time that diverges approaching jamming. We further probe mechanical response of the system to strain while undergoing coarsening. There are two competing time scales, namely the coarsening time and the mechanical relaxation time. We relate these to the evolution of the elastic response and the mechanical structure.

cond-mat.soft↗

arXiv2016

Contact Changes of Sheared Systems: Scaling, Correlations, and Mechanisms

We probe the onset and effect of contact changes in 2D soft harmonic particle packings which are sheared quasistatically under controlled strain. First, we show that in the majority of cases, the first contact changes correspond to the creation or breaking of contacts on a single particle, with contact breaking overwhelmingly likely for low pressures and/or small systems, and contact making and breaking equally likely for large pressures and in the thermodynamic limit. The statistics of the corresponding strains are near-Poissonian. The mean characteristic strains exhibit scaling with the number of particles N and pressure P, and reveal the existence of finite size effects akin to those seen for linear response quantities. Second, we show that linear response accurately predicts the strains of the first contact changes, which allows us to study the scaling of the characteristic strains of making and breaking contacts separately. Both of these show finite size scaling, and we formulate scaling arguments that are consistent with the observed behavior. Third, we probe the effect of the first contact change on the shear modulus G, and show in detail how the variation of G remains smooth and bounded in the large system size limit: even though contact changes occur then at vanishingly small strains, their cumulative effect, even at a fixed value of the strain, are limited, so that effectively, linear response remains well-defined. Fourth, we explore multiple contact changes under shear, and find strong and surprising correlations between alternating making and breaking events. Fifth, we show that by making a link with extremal statistics, our data is consistent with a very slow crossover to self averaging with system size, so that the thermodynamic limit is reached much more slowly than expected based on finite size scaling of elastic quantities or contact breaking strains.

cond-mat.soft↗

arXiv2016

Nonlocal elasticity near jamming

We demonstrate that the elasticity of jammed solids is nonlocal. By forcing frictionless soft sphere packings at varying wavelength, we directly access their transverse and longitudinal compliances without resorting to curve fitting. The observed wavelength dependence of the compliances is incompatible with classical (local) elasticity, and hence quantifies the amplitude of nonlocal effects. Three distinct length scales, two of which diverge, control the amplitude of both nonlocal effects and fluctuations about the mean response. Our results identify new, more accurate constitutive relations for weakly jammed solids, including emulsions, foams, and granulates.

cond-mat.stat-mech↗

arXiv2016

Beyond linear elasticity: Jammed solids at finite shear strain and rate

The shear response of soft solids can be modeled with linear elasticity, provided the forcing is slow and weak. Both of these approximations must break down when the material loses rigidity, such as in foams and emulsions at their (un)jamming point -- suggesting that the window of linear elastic response near jamming is exceedingly narrow. Yet precisely when and how this breakdown occurs remains unclear. To answer these questions, we perform computer simulations of stress relaxation and shear startup experiments in athermal soft sphere packings, the canonical model for jamming. By systematically varying the strain amplitude, strain rate, distance to jamming, and system size, we identify characteristic strain and time scales that quantify how and when the window of linear elasticity closes, and relate these scales to changes in the microscopic contact network. Our findings indicate that the mechanical response of jammed solids are generically nonlinear and rate-dependent on experimentally accessible strain and time scales.

cond-mat.soft↗

arXiv2014

Jamming in finite systems: stability, anisotropy, fluctuations and scaling

Athermal packings of soft repulsive spheres exhibit a sharp jamming transition in the thermodynamic limit. Upon further compression, various structural and mechanical properties display clean power-law behavior over many decades in pressure. As with any phase transition, the rounding of such behavior in finite systems close to the transition plays an important role in understanding the nature of the transition itself. The situation for jamming is surprisingly rich: the assumption that jammed packings are isotropic is only strictly true in the large-size limit, and finite-size has a profound effect on the very meaning of jamming. Here, we provide a comprehensive numerical study of finite-size effects in sphere packings above the jamming transition, focusing on stability as well as the scaling of the contact number and the elastic response.

cond-mat.soft↗

arXiv2014

Contact Changes near Jamming

We probe the onset and effect of contact changes in soft harmonic particle packings which are sheared quasistatically. We find that the first contact changes are the creation or breaking of contacts on a single particle. We characterize the critical strain, statistics of breaking versus making a contact, and ratio of shear modulus before and after such events, and explain their finite size scaling relations. For large systems at finite pressure, the critical strain vanishes but the ratio of shear modulus before and after a contact change approaches one: linear response remains relevant in large systems. For finite systems close to jamming the critical strain also vanishes, but here linear response already breaks down after a single contact change.

cond-mat.soft↗