Searcharxiv⌕ Search

arXiv subjects

Brian White

Publications and source records attributed to Brian White.

At least 37 records · Page 2Linked to original sources

Ancient asymptotically cylindrical flows and applications

In this paper, we prove the mean-convex neighborhood conjecture for neck singularities of the mean curvature flow in $\mathbb{R}^{n+1}$ for all $n\geq 3$: we show that if a mean curvature flow $\{M_t\}$ in $\mathbb{R}^{n+1}$ has an $S^{n-1}\times \mathbb{R}$ singularity at $(x_0,t_0)$, then there exists an $\varepsilon=\varepsilon(x_0,t_0)>0$ such that $M_t\cap B(x_0,\varepsilon)$ is mean-convex for all $t\in(t_0-\varepsilon^2,t_0+\varepsilon^2)$. As in the case $n=2$, which was resolved by the first three authors in arXiv:1810.08467, the existence of such a mean-convex neighborhood follows from classifying a certain class of ancient Brakke flows that arise as potential blowup limits near a neck singularity. Specifically, we prove that any ancient unit-regular integral Brakke flow with a cylindrical blowdown must be either a round shrinking cylinder, a translating bowl soliton, or an ancient oval. In particular, combined with a prior result of the last two authors, we obtain uniqueness of mean curvature flow through neck singularities. The main difficulty in addressing the higher dimensional case is in promoting the spectral analysis on the cylinder to global geometric properties of the solution. Most crucially, due to the potential wide variety of self-shrinking flows with entropy lower than the cylinder when $n\geq 3$, smoothness does not follow from the spectral analysis by soft arguments. This precludes the use of the classical moving plane method to derive symmetry. To overcome this, we introduce a novel variant of the moving plane method, which we call "moving plane method without assuming smoothness" - where smoothness and symmetry are established in tandem.

math.DG↗

Notes on translating solitons for Mean Curvature Flow

The purpose of these notes is to provide an introduction to those who want to learn more about translating solitons for the mean curvature flow in $\mathbb{R}^3$, particularly those which are complete graphs over domains in $\mathbb{R}^2$. In this paper we describe a full classification of complete translating graphs in $\mathbb{R}^3$.

math.DG↗

Mean Curvature Flow with Boundary

We develop a theory of surfaces with boundary moving by mean curvature flow. In particular, we prove a general existence theorem by elliptic regularization, and we prove boundary regularity at all positive times under very mild hypotheses.

math.DG↗

Scherk-like Translators for Mean Curvature Flow

We prove existence and uniqueness for a two-parameter family of translators for mean curvature flow. We get additional examples by taking limits at the boundary of the parameter space. Some of the translators resemble well-known minimal surfaces (Scherk's doubly periodic minimal surfaces, helicoids), but others have no minimal surface analogs. A one-parameter subfamily of the examples (the pitchforks) have finite topology and quadratic area growth, and thus might arise as blowups at singularities of initially smooth, closed surfaces flowing by mean curvature flow.

math.DG↗

Stationary polyhedral varifolds minimize area

We prove that every stationary polyhedral varifold minimizes area in the following senses: (1) its area cannot be decreased by a one-to-one Lipschitz ambient deformation that coincides with the identity outside of a compact set, and (2) it is the varifold associated to a mass-minimizing flat chain with coefficients in a certain metric abelian group. NOTE: After this paper was posted, I learned that (1) and (2) were already proved by Choe and Morgan, respectively. Thus this paper is an exposition of their results.

math.DG↗

Generic Transversality of Minimal Submanifolds and Generic Regularity of Two-Dimensional Area-Minimizing Integral Currents

Suppose that $N$ is a smooth manifold with a smooth Riemannian metric $g_0$, and that $Γ$ is a smooth submanifold of $N$. This paper proves that for a generic (in the sense of Baire category) smooth metric $g$ conformal to $g_0$, if $F$ is any simple $g$-minimal immersion of a closed manifold into N, then $F$ is transverse to $Γ$ and $F$ is self-transverse. The theorem remains true with "transverse" and "self-transverse" replaced by "strongly transverse" and "strongly self-transverse". The theorem also holds for hypersurfaces of constant mean curvature or, more generally, of prescribed mean curvature. The paper also proves that for a generic ambient metric, every $2$-dimensional surface (integral current or flat chain mod $2$) without boundary that minimizes area in its homology class has support equal to a smoothly embedded minimal surface.

math.DG↗

Sharp Entropy Bounds for Self-Shrinkers in Mean Curvature Flow

Let $M\subset {\mathbf R}^{m+1}$ be a smooth, closed, codimension-one self-shrinker (for mean curvature flow) with nontrivial $k^{\rm th}$ homology. We show that the entropy of $M$ is greater than or equal to the entropy of a round $k$-sphere, and that if equality holds, then $M$ is a round $k$-sphere in ${\mathbf R}^{k+1}$.

math.DG↗

Non-fattening of mean curvature flow at singularities of mean convex type

We show that a mean curvature flow starting from a compact, smoothly embedded hypersurface M remains unique past singularities, provided the singularities are of mean convex type, i.e., if around each singular point, the surface moves in one direction. Specifically, the level set flow of M does not fatten if all singularities are of mean convex type. This generalizes the well known fact that the level set flow of a mean convex initial hypersurface M does not fatten. This also provides the first instance where non-fattening is concluded from local information around the singular set.

math.DG↗

Limiting behavior of sequences of properly embedded minimal disks

We develop a theory of "minimal $θ$-graphs" and characterize the behavior of limit laminations of such surfaces, including an understanding of their limit leaves and their curvature blow-up sets. We use this to prove that it is possible to realize families of catenoids in euclidean space as limit leaves of sequences of embedded minimal disks, even when there is no curvature blow-up. Our methods work in a more general Riemannian setting, including hyperbolic space. This allows us to establish the existence of a complete, simply connected, minimal surface in hyperbolic space that is not properly embedded.

math.DG↗

A local regularity theorem for mean curvature flow with triple edges

Mean curvature flow of clusters of n-dimensional surfaces in R^{n+k} that meet in triples at equal angles along smooth edges and higher order junctions on lower dimensional faces is a natural extension of classical mean curvature flow. We call such a flow a mean curvature flow with triple edges. We show that if a smooth mean curvature flow with triple edges is weakly close to a static union of three n-dimensional unit density half-planes, then it is smoothly close. Extending the regularity result to a class of integral Brakke flows, we show that this implies smooth short-time existence of the flow starting from an initial surface cluster that has triple edges, but no higher order junctions.

math.DG↗

Helicoidal minimal surfaces of prescribed genus

For every genus $g$, we prove that $S^2 \times R$ contains complete, properly embedded, genus-$g$ minimal surfaces whose two ends are asymptotic to helicoids of any prescribed pitch. We also show that as the radius of the $S^2$ tends to infinity, these examples converge smoothly to complete, properly embedded minimal surfaces in $R^3$ that are helicoidal at infinity. We prove that helicoidal surfaces in $R^3$ of every prescribed genus occur as such limits of examples in $S^2\times R$.

math.DG↗

Lectures on Minimal Surface Theory

An article based on a four-lecture introductory minicourse on minimal surface theory given at the 2013 summer program of the Institute for Advanced Study and the Park City Mathematics Institute.

math.DG↗

Controlling Area Blow-up in Minimal or Bounded Mean Curvature Varieties

Consider a sequence of minimal varieties M_i in a Riemannian manifold N such that the boundary measures are uniformly bounded on compact sets. Let Z be the set of points at which the areas of the M_i blow up. We prove that Z behaves in some ways like a minimal variety without boundary: in particular, it satisfies the same maximum and barrier principles that a smooth minimal submanifold satisfies. For suitable open subsets W of N, this allows one to show that if the areas of the M_i are uniformly bounded on compact subsets of W, then the areas are in fact uniformly bounded on all compact subsets of N. Similar results are proved for varieties with bounded mean curvature. Applications include a version of Allard's boundary regularity theorem in which no mass bounds are assumed.

math.DG↗

On the Bumpy Metrics Theorem for Minimal Submanifolds

This paper proves several natural generalizations of the theorem that for a generic, $C^k$ Riemannian metric on a smooth manifold, there are no closed, embedded, minimal submanifolds with nontrivial jacobi fields.

math.DG↗

Curvatures of embedded minimal disks blow up on subsets of C^1 curves

Any sequence of properly embedded minimal disks in an open subset U of Euclidean 3-space has a subsequence such that the curvatures blow up on a relatively closed subset K of U and such that the disks converge in the complement of K to a minimal lamination of U\K. Assuming results of Colding-Minicozzi and an extension due to Meeks, we prove that such a blow-up set K must be contained in a C^1 embedded curve.

math.DG↗

Properly embedded, area-minimizing surfaces in hyperbolic $3$-space

We prove prove a bridge principle at infinity for area-minimizing surfaces in the hyperbolic space $\mathbb{H}^3$, and we use it to prove that any open, connected, orientable surface can be properly embedded in $\mathbb{H}^3$ as an area-minimizing surface. Moreover, the embedding can be constructed in such a way that the limit sets of different ends are disjoint.

math.DG↗

Topological Change in Mean Convex Mean Curvature Flow

Consider the mean curvature flow of an (n+1)-dimensional, compact, mean convex region in Euclidean space (or, if n<7, in a Riemannian manifold). We prove that elements of the m-th homotopy group of the complementary region can die only if there is a shrinking S^k x R^(n-k) singularity for some k less than or equal to m. We also prove that for each m from 1 to n, there is a nonempty open set of compact, mean convex regions K in R^(n+1) with smooth boundary for which the resulting mean curvature flow has a shrinking S^m x R^(n-m) singularity.

math.DG↗