Searcharxiv⌕ Search

arXiv subjects

Bruno Clerckx

Publications and source records attributed to Bruno Clerckx.

At least 271 records · Page 15Linked to original sources
arXiv2017

Mitigation of Phase Noise in Massive MIMO Systems: A Rate-Splitting Approach

This work encompasses Rate-Splitting (RS), providing significant benefits in multi-user settings in the context of huge degrees of freedom promised by massive Multiple-Input Multiple-Output (MIMO). However, the requirement of massive MIMO for cost-efficient implementation makes them more prone to hardware imperfections such as phase noise (PN). As a result, we focus on a realistic broadcast channel with a large number of antennas and hampered by the unavoidable PN. Moreover, we employ the RS transmission strategy, and we show its robustness against PN, since the sum-rate does not saturate at high signal-to-noise ratio (SNR). Although, the analytical results are obtained by means of the deterministic equivalent analysis, they coincide with simulation results even for finite system dimensions.

cs.IT↗
arXiv2016

Overloaded Multiuser MISO Transmission with Imperfect CSIT

A required feature for the next generation of wireless communication networks will be the capability to serve simultaneously a large number of devices with heterogeneous CSIT qualities and demands. In this paper, we consider the overloaded MISO BC with two groups of CSIT qualities. We propose a transmission scheme where degraded symbols are superimposed on top of spatially-multiplexed symbols. The developed strategy allows to serve all users in a non-orthogonal manner and the analysis shows an enhanced perfomance compared to existing schemes. Moreover, optimality in a DoF sense is shown.

cs.IT↗
arXiv2016

Communications and Signals Design for Wireless Power Transmission

Radiative wireless power transfer (WPT) is a promising technology to provide cost-effective and real-time power supplies to wireless devices. Although radiative WPT shares many similar characteristics with the extensively studied wireless information transfer or communication, they also differ significantly in terms of design objectives, transmitter/receiver architectures and hardware constraints, etc. In this article, we first give an overview on the various WPT technologies, the historical development of the radiative WPT technology and the main challenges in designing contemporary radiative WPT systems. Then, we focus on discussing the new communication and signal processing techniques that can be applied to tackle these challenges. Topics discussed include energy harvester modeling, energy beamforming for WPT, channel acquisition, power region characterization in multi-user WPT, waveform design with linear and non-linear energy receiver model, safety and health issues of WPT, massive MIMO (multiple-input multiple-output) and millimeter wave (mmWave) enabled WPT, wireless charging control, and wireless power and communication systems co-design. We also point out directions that are promising for future research.

cs.IT↗
arXiv2016

On the Spatial Degrees of Freedom of Multicell and Multiuser MIMO Channels

We study the converse and achievability for the degrees of freedom of the multicellular multiple-input multiple-output (MIMO) multiple access channel (MAC) with constant channel coefficients. We assume L>1 homogeneous cells with K>0 users per cell where the users have M antennas and the base stations are equipped with N antennas. The degrees of freedom outer bound for this L-cell and K-user MIMO MAC is formulated. The characterized outer bound uses insight from a limit on the total degrees of freedom for the L-cell heterogeneous MIMO network. We also show through an example that a scheme selecting a transmitter and performing partial message sharing outperforms a multiple distributed transmission strategy in terms of the total degrees of freedom. Simple linear schemes attaining the outer bound (i.e., those achieving the optimal degrees of freedom) are explores for a few cases. The conditions for the required spatial dimensions attaining the optimal degrees of freedom are characterized in terms of K, L, and the number of transmit streams. The optimal degrees of freedom for the two-cell MIMO MAC are examined by using transmit zero forcing and null space interference alignment and subsequently, simple receive zero forcing is shown to provide the optimal degrees of freedom for L>1. By the uplink and downlink duality, the degrees of freedom results in this paper are also applicable to the downlink. In the downlink scenario, we study the degrees of freedom of L-cell MIMO interference channel exploring multiuser diversity. Strong convergence modes of the instantaneous degrees of freedom as the number of users increases are characterized.

cs.IT↗
arXiv2016

On the Capacity of Vector Gaussian Channels With Bounded Inputs

The capacity of a deterministic multiple-input multiple-output (MIMO) channel under the peak and average power constraints is investigated. For the identity channel matrix, the approach of Shamai et al. is generalized to the higher dimension settings to derive the necessary and sufficient conditions for the optimal input probability density function. This approach prevents the usage of the identity theorem of the holomorphic functions of several complex variables which seems to fail in the multi-dimensional scenarios. It is proved that the support of the capacity-achieving distribution is a finite set of hyper-spheres with mutual independent phases and amplitude in the spherical domain. Subsequently, it is shown that when the average power constraint is relaxed, if the number of antennas is large enough, the capacity has a closed form solution and constant amplitude signaling at the peak power achieves it. Moreover, it will be observed that in a discrete-time memoryless Gaussian channel, the average power constrained capacity, which results from a Gaussian input distribution, can be closely obtained by an input where the support of its magnitude is a discrete finite set. Finally, we investigate some upper and lower bounds for the capacity of the non-identity channel matrix and evaluate their performance as a function of the condition number of the channel.

cs.IT↗
arXiv2016

Sum-Rate Maximization for Linearly Precoded Downlink Multiuser MISO Systems with Partial CSIT: A Rate-Splitting Approach

This paper considers the Sum-Rate (SR) maximization problem in downlink MU-MISO systems under imperfect Channel State Information at the Transmitter (CSIT). Contrary to existing works, we consider a rather unorthodox transmission scheme. In particular, the message intended to one of the users is split into two parts: a common part which can be recovered by all users, and a private part recovered by the corresponding user. On the other hand, the rest of users receive their information through private messages. This Rate-Splitting (RS) approach was shown to boost the achievable Degrees of Freedom (DoF) when CSIT errors decay with increased SNR. In this work, the RS strategy is married with linear precoder design and optimization techniques to achieve a maximized Ergodic SR (ESR) performance over the entire range of SNRs. Precoders are designed based on partial CSIT knowledge by solving a stochastic rate optimization problem using means of Sample Average Approximation (SAA) coupled with the Weighted Minimum Mean Square Error (WMMSE) approach. Numerical results show that in addition to the ESR gains, the benefits of RS also include relaxed CSIT quality requirements and enhanced achievable rate regions compared to conventional transmission with NoRS.

cs.IT↗
arXiv2016

Waveform Design for Wireless Power Transfer

Far-field Wireless Power Transfer (WPT) has attracted significant attention in recent years. Despite the rapid progress, the emphasis of the research community in the last decade has remained largely concentrated on improving the design of energy harvester (so-called rectenna) and has left aside the effect of transmitter design. In this paper, we study the design of transmit waveform so as to enhance the DC power at the output of the rectenna. We derive a tractable model of the non-linearity of the rectenna and compare with a linear model conventionally used in the literature. We then use those models to design novel multisine waveforms that are adaptive to the channel state information (CSI). Interestingly, while the linear model favours narrowband transmission with all the power allocated to a single frequency, the non-linear model favours a power allocation over multiple frequencies. Through realistic simulations, waveforms designed based on the non-linear model are shown to provide significant gains (in terms of harvested DC power) over those designed based on the linear model and over non-adaptive waveforms. We also compute analytically the theoretical scaling laws of the harvested energy for various waveforms as a function of the number of sinewaves and transmit antennas. Those scaling laws highlight the benefits of CSI knowledge at the transmitter in WPT and of a WPT design based on a non-linear rectenna model over a linear model. Results also motivate the study of a promising architecture relying on large-scale multisine multi-antenna waveforms for WPT. As a final note, results stress the importance of modeling and accounting for the non-linearity of the rectenna in any system design involving wireless power.

cs.IT↗
arXiv2016

User-Centric Interference Nulling in Downlink Multi-Antenna Heterogeneous Networks

In heterogeneous networks (HetNets), strong interference due to spectrum reuse affects each user's signal-to-interference ratio (SIR), and hence is one limiting factor of network performance. In this paper, we propose a user-centric interference nulling (IN) scheme in a downlink large-scale HetNet to improve coverage/outage probability by improving each user's SIR. This IN scheme utilizes at most maximum IN degree of freedom (DoF) at each macro-BS to avoid interference to uniformly selected macro (pico) users with signal-to-individual-interference ratio (SIIR) below a macro (pico) IN threshold, where the maximum IN DoF and the two IN thresholds are three design parameters. Using tools from stochastic geometry, we first obtain a tractable expression of the coverage (equivalently outage) probability. Then, we analyze the asymptotic coverage/outage probability in the low and high SIR threshold regimes. The analytical results indicate that the maximum IN DoF can affect the order gain of the outage probability in the low SIR threshold regime, but cannot affect the order gain of the coverage probability in the high SIR threshold regime. Moreover, we characterize the optimal maximum IN DoF which optimizes the asymptotic coverage/outage probability. The optimization results reveal that the IN scheme can linearly improve the outage probability in the low SIR threshold regime, but cannot improve the coverage probability in the high SIR threshold regime. Finally, numerical results show that the proposed scheme can achieve good gains in coverage/outage probability over a maximum ratio beamforming scheme and a user-centric almost blank subframes (ABS) scheme.

cs.IT↗
arXiv2016

Robust Transmission in Downlink Multiuser MISO Systems: A Rate-Splitting Approach

We consider a downlink multiuser MISO system with bounded errors in the Channel State Information at the Transmitter (CSIT). We first look at the robust design problem of achieving max-min fairness amongst users (in the worst-case sense). Contrary to the conventional approach adopted in literature, we propose a rather unorthodox design based on a Rate-Splitting (RS) strategy. Each user's message is split into two parts, a common part and a private part. All common parts are packed into one super common message encoded using a public codebook, while private parts are independently encoded. The resulting symbol streams are linearly precoded and simultaneously transmitted, and each receiver retrieves its intended message by decoding both the common stream and its corresponding private stream. For CSIT uncertainty regions that scale with SNR (e.g. by scaling the number of feedback bits), we prove that a RS-based design achieves higher max-min (symmetric) Degrees of Freedom (DoF) compared to conventional designs (NoRS). For the special case of non-scaling CSIT (e.g. fixed number of feedback bits), and contrary to NoRS, RS can achieve a non-saturating max-min rate. We propose a robust algorithm based on the cutting-set method coupled with the Weighted Minimum Mean Square Error (WMMSE) approach, and we demonstrate its performance gains over state-of-the art designs. Finally, we extend the RS strategy to address the Quality of Service (QoS) constrained power minimization problem, and we demonstrate significant gains over NoRS-based designs.

cs.IT↗
arXiv2016

A Rate-Splitting Strategy for Max-Min Fair Multigroup Multicasting

We consider the problem of transmit beamforming to multiple cochannel multicast groups. The conventional approach is to beamform a designated data stream to each group, while treating potential inter-group interference as noise at the receivers. In overloaded systems where the number of transmit antennas is insufficient to perform interference nulling, we show that inter-group interference dominates at high SNRs, leading to a saturating max-min fair performance. We propose a rather unconventional approach to cope with this issue based on the concept of Rate-Splitting (RS). In particular, part of the interference is broadcasted to all groups such that it is decoded and canceled before the designated beams are decoded. We show that the RS strategy achieves significant performance gains over the conventional multigroup multicast beamforming strategy.

cs.IT↗
arXiv2016

Constant Envelope Signaling in MIMO Channels

The capacity of the point-to-point vector Gaussian channel under the peak power constraint is not known in general. This paper considers a simpler scenario in which the input signal vector is forced to have a constant envelope (or norm). The capacity-achieving distribution for the non-identity $2\times 2$ MIMO channel when the input vector lies on a circle in $\mathbb{R}^2$ is obtained and is shown to have a finite number of mass points on the circle. Subsequently, it is shown that the degrees of freedom (DoF) of a full-rank $n$ by $n$ channel with constant envelope signaling is $n-1$ and it can be achieved by a uniform distribution over the surface of the hypersphere whose radius is defined by the constant envelope. Finally, for the 2 by 2 channel, the power allocation scheme of the constant envelope signaling is compared with that of the conventional case, in which the constraint is on the average transmitted power. It is observed that when the condition number of the channel is close to one, both schemes have a similar trend while this is not the case as the condition number grows.

cs.IT↗
arXiv2016

Relaying Strategies for Wireless-Powered MIMO Relay Networks

This paper investigates relaying schemes in an amplify-and-forward multiple-input multiple-output relay network, where an energy-constrained relay harvests wireless power from the source information flow and can be further aided by an energy flow (EF) in the form of a wireless power transfer at the destination. However, the joint optimization of the relay matrix and the source precoder for the energy-flow-assisted (EFA) and the non-EFA (NEFA) schemes is intractable. The original rate maximization problem is transformed into an equivalent weighted mean square error minimization problem and optimized iteratively, where the global optimum of the nonconvex source precoder subproblem is achieved by semidefinite relaxation and rank reduction. The iterative algorithm finally converges. Then, the simplified EFA and NEFA schemes are proposed based on channel diagonalization, such that the matrices optimizations can be simplified to power optimizations. Closed-form solutions can be achieved. Simulation results reveal that the EFA schemes can outperform the NEFA schemes. Additionally, deploying more antennas at the relay increases the dimension of the signal space at the relay. Exploiting the additional dimension, the EF leakage in the information detecting block can be nearly separated from the information signal, such that the EF leakage can be amplified with a small coefficient.

cs.IT↗
arXiv2016

Achievable Sum DoF of the K-User MIMO Interference Channel with Delayed CSIT

This paper considers a $K$-user multiple-input-multiple-output (MIMO) interference channel (IC) where 1) the channel state information obtained by the transmitters (CSIT) is completely outdated, and 2) the number of transmit antennas at each transmitter, i.e., $M$, is greater than the number of receive antennas at each user, i.e., $N$. The usefulness of the delayed CSIT was firstly identified in a $K$-phase Retrospective Interference Alignment (RIA) scheme proposed by Maddah-Ali et al for the Multiple-Input-Single-Output Broadcast Channel, but the extension to the MIMO IC is a non-trivial step as each transmitter only has the message intended for the corresponding user. Recently, Abdoli et al focused on a Single-Input-Single-Output IC and solved such bottleneck by inventing a $K$-phase RIA with distributed overheard interference retransmission. In this paper, we propose two $K$-phase RIA schemes suitable for the MIMO IC by generalizing and integrating some key features of both Abdoli's and Maddah-Ali's works. The two schemes jointly yield the best known sum Degrees-of-Freedom (DoF) performance so far. For the case $\frac{M}{N}{\geq}K$, the achieved sum DoF is asymptotically given by $\frac{64}{15}N$ when $K{\to}\infty$.

cs.IT↗
arXiv2016

Waveform Optimization for Large-Scale Multi-Antenna Multi-Sine Wireless Power Transfer

Wireless power transfer (WPT) is expected to be a technology reshaping the landscape of low-power applications such as the Internet of Things, machine-to-machine communications and radio frequency identification networks. Although there has been some progress towards multi-antenna multi-sine WPT design, the large-scale design of WPT, reminiscent of massive multiple-input multiple-output (MIMO) in communications, remains an open problem. Considering the nonlinear rectifier model, a multiuser waveform optimization algorithm is derived based on successive convex approximation (SCA). A lower-complexity algorithm is derived based on asymptotic analysis and sequential approximation (SA). It is shown that the difference between the average output voltage achieved by the two algorithms can be negligible provided the number of antennas is large enough. The performance gain of the nonlinear model based design over the linear model based design can be large, in the presence of a large number of tones.

cs.IT↗
arXiv2016

MISO Networks with Imperfect CSIT: A Topological Rate-Splitting Approach

Recently, the Degrees-of-Freedom (DoF) region of multiple-input-single-output (MISO) networks with imperfect channel state information at the transmitter (CSIT) has attracted significant attentions. An achievable scheme is known as rate-splitting (RS) that integrates common-message-multicasting and private-message-unicasting. In this paper, focusing on the general $K$-cell MISO IC where the CSIT of each interference link has an arbitrary quality of imperfectness, we firstly identify the DoF region achieved by RS. Secondly, we introduce a novel scheme, so called Topological RS (TRS), whose novelties compared to RS lie in a multi-layer structure and transmitting multiple common messages to be decoded by groups of users rather than all users. The design of TRS is motivated by a novel interpretation of the $K$-cell IC with imperfect CSIT as a weighted-sum of a series of partially connected networks. We show that the DoF region achieved by TRS covers that achieved by RS. Also, we find the maximal sum DoF achieved by TRS via hypergraph fractional packing, which yields the best sum DoF so far. Lastly, for a realistic scenario where each user is connected to three dominant transmitters, we identify the sufficient condition where TRS strictly outperforms conventional schemes.

cs.IT↗
arXiv2016

Rate Splitting for MIMO Wireless Networks: A Promising PHY-Layer Strategy for LTE Evolution

MIMO processing plays a central part towards the recent increase in spectral and energy efficiencies of wireless networks. MIMO has grown beyond the original point-to-point channel and nowadays refers to a diverse range of centralized and distributed deployments. The fundamental bottleneck towards enormous spectral and energy efficiency benefits in multiuser MIMO networks lies in a huge demand for accurate channel state information at the transmitter (CSIT). This has become increasingly difficult to satisfy due to the increasing number of antennas and access points in next generation wireless networks relying on dense heterogeneous networks and transmitters equipped with a large number of antennas. CSIT inaccuracy results in a multi-user interference problem that is the primary bottleneck of MIMO wireless networks. Looking backward, the problem has been to strive to apply techniques designed for perfect CSIT to scenarios with imperfect CSIT. In this paper, we depart from this conventional approach and introduce the readers to a promising strategy based on rate-splitting. Rate-splitting relies on the transmission of common and private messages and is shown to provide significant benefits in terms of spectral and energy efficiencies, reliability and CSI feedback overhead reduction over conventional strategies used in LTE-A and exclusively relying on private message transmissions. Open problems, impact on standard specifications and operational challenges are also discussed.

cs.IT↗
arXiv2016

Waveform Optimization for SWIPT with Nonlinear Energy Harvester Modeling

Simultaneous Wireless Information and Power Transfer (SWIPT) has attracted significant attention in the communication community. The problem of waveform design for SWIPT has however never been addressed so far. In this paper, a novel SWIPT transceiver architecture is introduced relying on the superposition of multisine and OFDM waveforms at the transmitter and a power-splitter receiver equipped with an energy harvester and an information decoder capable of cancelling the multisine waveforms. The SWIPT multisine/OFDM waveforms are optimized so as to maximize the rate-energy region of the whole system. They are adaptive to the channel state information and result from a posynomial maximization problem that originates from the non-linearity of the energy harvester. Numerical results illustrate the performance of the derived waveforms and SWIPT architecture.

cs.IT↗