arXiv subjects

Bruno Spataro

Publications and source records attributed to Bruno Spataro.

14 recordsLinked to original sources

arXiv2025

Numerical and Analytical Study of the Magnetic Field Distribution in a Three-Solenoid System

This paper investigates the magnetic fields produced by a three-coil system, focusing on how different mesh resolutions affect the accuracy of the results. Using both the Poisson solver, as well as a numerical approach based on the solution of fractional integrals, the study examines coils with dimensions of 80 mm by 160 mm and a radius of 15.5 mm, each carrying a current of 200 A. The research explores how varying mesh step sizes within the coil regions influences the simulations accuracy and convergence. The results are analyzed along a line parallel to the central axis at a distance equal to half of the solenoid's radius.. The findings emphasize the consistency of the numerical results, the compatibility of the solvers, and offer insights into further optimization strategies for more efficient simulations.

physics.acc-ph↗

arXiv2022

A novel harmonic klystron configuration for high power microwave frequency conversion

A new frequency converter, operating at significantly higher power and efficiency than previous devices, is described in this paper. The proposed device is implemented as a klystron structure where a new design principle is used. New analytical formulas and a specific design procedure are proposed. The klystron frequency multiplier can be suitable for telecommunications and non-lethal weapon, scientific and medical particle accelerators while the most interested exploitations are in the field of high gradient particle acceleration and FEL devices for which no performant sources exist. The advanced klystron multiplier can replace all the low level circuitry for frequency multiplication as a less expensive alternative. Efficiencies in the range of 60% in the K-band range with power levels of 30 MW are possible without phase noise, sideband generation, jitter or chirp effects. The presented design principle is applicable to other bands or power levels.

physics.acc-ph↗

arXiv2022

Theory of Diffraction by Holes of Arbitrary Sizes

New high-gradient accelerating RF cavities are nowadays developed in several national laboratories for high-energy physics applications. Ultra high gradients, up to the order of GV/m, can be achieved by using ultra compact accelerating structures in the sub-THz regime. Nevertheless, the experimental setup for measuring the main RF parameters for such compact structures is not trivial and can easily produce errors due to lack of accuracy. Moreover, Radio-Frequency (RF) simulations for these types of cavities can require a large amount of computational time. In particular, one of the main RF parameters that needs to be evaluated and measured for the accelerating structures is the reflection coefficient. In order to obtain a fast and accurate analytical estimation, we have developed the electromagnetic theory for the calculation of the coupling of a resonant cavity with an RF waveguide. This theory is based on the Bethe's small aperture polarization approach, also developed by Collin's. In this paper, we give an exact analytical expression of the reflection coefficient as function of the physics parameters of the cavity-waveguide system, which can be applied to any geometry, material and frequency.

physics.acc-ph↗

arXiv2022

C$^3$ Demonstration Research and Development Plan

C$^3$ is an opportunity to realize an e$^+$e$^-$ collider for the study of the Higgs boson at $\sqrt{s} = 250$ GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C$^3$ is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced state of linear collider designs, the key system that requires technical maturation for C$^3$ is the main linac. This white paper presents the staged approach towards a facility to demonstrate C$^3$ technology with both Direct (source and main linac) and Parallel (beam delivery, damping ring, ancillary component) R&D. The white paper also includes discussion on the approach for technology industrialization, related HEP R&D activities that are enabled by C$^3$ R&D, infrastructure requirements and siting options.

physics.acc-ph↗

arXiv2021

C$^3$: A "Cool" Route to the Higgs Boson and Beyond

We present a proposal for a cold copper distributed coupling accelerator that can provide a rapid route to precision Higgs physics with a compact 8 km footprint. This proposal is based on recent advances that increase the efficiency and operating gradient of a normal conducting accelerator. This technology also provides an $e^{+}e^{-}$ collider path to physics at multi-TeV energies. In this article, we describe our vision for this technology and the near-term R&D program needed to pursue it.

hep-ex↗

arXiv2021

A hard open X-band RF accelerating structure made by two halves

High-gradient linacs of next generation require novel accelerating structures which are compact, robust and cost-effective. Dedicated research and development have been launched in the linear-collider community. This paper focuses on the technological developments directed to show the viability of novel welding techniques and related applications, in order to benefit from the superior high-gradient performance of accelerating structures made of hard-copper alloys. The structure geometry that we propose allows getting a high longitudinal shunt impedance of the accelerating mode and increasing the mode separation frequencies.

physics.acc-ph↗

arXiv2021

Ultra-Compact Ka-band linearizer for the Ultra-Compact X-Ray Free-Electron Laser at UCLA

Notably innovative technologies will permit compact and affordable advanced accelerators as the linear collider and X-ray free-electron lasers (XFELs) with accelerating gradients over twice the value achieved with current technologies. In particular XFEL is able to produce coherent X-ray pulses with peak brightness 10 orders of magnitude greater than preceding approaches, which has revolutionized numerous fields through imaging of the nanoscopic world at the time and length scale of atom-based systems, that is of femtosecond and Angstrom. There is a strong interest for combining these two fields, to form a proper tool with the goal of producing a very compact XFEL in order to investigate multi-disciplinary researches in chemistry, biology, materials science, medicine and physics. In the framework of the Ultra -Compact XFEL project (UC-XFEL) under study at the UCLA, an ultra high gradient higher harmonic RF accelerating structure for the longitudinal space phase linearization is foreseen. To this aim, a Ka-Band linearizer (34.2 GHz) with an integrated voltage of at least 15 MV working on 6th harmonic with respect to the main Linac frequency (5.712 GHz) is required. We here present the electromagnetic design of a cold ultra compact Ka-band SW linearizer, 8 cm long, working on pi mode with an ultra high accelerating gradient (beyond 100 MV/m) and minimum surface electric field for minimizing the probability of RF breakdown. Moreover, we discuss a TW option and compare it with the initial SW structure, by means of main RF parameters as well as beam-dynamics considerations. The numerical electromagnetic studies have been performed by using the well known SuperFish, HFSS and CST.

physics.acc-ph↗

arXiv2020

Simulations for a low-perveance high-quality beam matching of a high efficiency Ka-band klystron

Self consistent analytic and numeric design for a set of electron guns with a high beams quality to be used in high power Ka-band klystrons are presented in this paper. The set of electron guns can be used in the high power Ka-band klystrons in order to feed linear accelerating structures at 36 GHz with an estimated 20 MW input power by achieving an effective accelerating electric field in the (100-150) MV/m range. In the framework of the Compact Light XLS project, a short Ka-band linearizer by working at 36 GHz able for providing an integrated voltage of at least 15 MV is proposed for bunch-phase linearization. In order to optimize the Ka-band klystrons efficiency for achieving 20 MW RF output power, different electron guns and beam focusing channel designs are examined and discussed in this paper.

physics.acc-ph↗

arXiv2020

The Ka-Band High Power Klystron Amplifier Design Program of INFN

In the framework of the Compact Light XLS project, a short ultra-high gradient linearizer working on the third harmonic of the main LINAC frequency is requested. Increasing gradients and reducing dimensions are requirements for XLS and all next generation linear accelerators. Actually, ultra-compact normal conducting accelerating structures, operating in the Ka-band regime ranging from 100 to 150 MV/m are required to achieve ultra-high gradients for research, industrial and medical applications. To fulfill these strong requirements, the R$\&$D of a proper Ka-band klystron with RF power output and a high efficiency is mandatory. This contribution reports the design of a possible klystron amplifier tube that provides and output signal at 36 GHz to feed the phase space linearizer, while receiving at the input, a low level signal oscillating at 12 GHz; which is the LINAC frequency. The proposed structure reaches an efficiency of 42$\%$ and a 20 MW RF power output. This contribution discusses also the high-power DC gun, the beam focusing channel and the RF beam dynamics.

physics.acc-ph↗

arXiv2020

Fractional Powers of the Differentiation and Integration Operators and its Application in Accelerator Physics and Technology

In this paper we present a solution to a fractional integral of the order 3/2 with the use of a novel method. The integral arises during solving the Biot-Savart equation to find the exact analytical solution for the magnetic field components of a solenoid. We solved the integral by cutting the branch line in order to have an analytic function inside the integral instead of multi-valued operation.

math.CA↗

arXiv2020

A SW Ka-Band Linearizer Structure with Minimum Surface Electric Field for the Compact Light XLS Project

There is a strong demand for accelerating structures able to achieve higher gradients and more compact dimensions for the next generation of linear accelerators for research, industrial and medical applications. In the framework of the Compact Light XLS project, an ultra high gradient higher harmonic RF accelerating structure is needed for the linearization of the longitudinal space phase. In order to determine the maximum sustainable gradients in normal conducting RF powered particle beam accelerators with extremely low probability of RF breakdown, investigations are in progress for using shorts accelerating structures in the Ka-band regime. We here report an electromagnetic design of a compact linearizer standing wave (SW) accelerating structure 8 cm long operating on $π$ mode, third harmonic with respect to the Linac frequency (11.994 GHz) with a 100 MV/m accelerating gradient and minimum surface electric field. Numerical electromagnetic studies have been performed by using the well known SuperFish, HFSS and CST computing software.

physics.acc-ph↗

arXiv2020

A Novel Exact Analytical Expression for the Magnetic Field of a Solenoid

In this paper we present the analytical calculations to derive the magnetic field of a solenoid by solving exactly a fractional integral with the use of a novel method. Starting from the Biot-Savart law, we consider a coil of negligible thickness with a stationary electric current. We derive the expressions of the on and off-axes magnetic field components. The results have been compared to some simplified and known analytical formulae as well as to a commercial numerical code showing a good agreement.

physics.acc-ph↗

arXiv2020

Initial Design of a High-Power Ka-Band Klystron

Accelerating structures operating in Ka-Band are foreseen to achieve gradients around 150 MV/m. Among possible applications of a Ka-Band accelerating structure we refer to the beam phase-space manipulation for the Compact Light XLS project as well as medical and industrial applications. In this paper, a Ka-Band Klystron amplifier is being investigated in order to feed Ka-Band accelerating structures. The initial design is presented including the high-power DC gun and the beam focusing channel.

physics.acc-ph↗

arXiv2018

Study of Collective Effects in the FCC-ee Collider

The Future Circular Collider (FCC) study aims at designing different options of a post-LHC collider. The high luminosity electron-positron collider FCC-ee based on the crab waist concept is considered as an intermediate step on the way towards FCC-hh, a 100 TeV hadron collider using the same tunnel of about 100 km. Due to a high intensity of circulating beams the impact of collective effects on FCC-ee performance has to be carefully analyzed. In this paper we evaluate beam coupling impedance of the FCC-ee vacuum chamber, estimate thresholds and rise times of eventual single- and multibunch beam instabilities and discuss possible measures to mitigate them.

physics.acc-ph↗