arXiv subjects

Bryce Bixler

Publications and source records attributed to Bryce Bixler.

8 recordsLinked to original sources

arXiv2026

The Simons Observatory: Overview of the Cryogenic Half-wave Plate Polarization Modulators

The Simons Observatory (SO) is a ground-based Cosmic Microwave Background (CMB) experiment that is located in the Atacama plateau. The Small Aperture Telescopes (SATs) of SO are optimized for polarimetry on the degree scale. Atmospheric $1/f$ contamination of the CMB signal poses a significant challenge for observations at this angular scale. In order to control the $1/f$ noise, the SATs utilize a Cryogenic Half-Wave Plate (CHWP) in their optics. The CHWP modulates the polarization signal to a higher frequency to separate it from the unpolarized atmospheric noise. Precision measurements of the CHWP rotation angle are required to successfully recover the target polarized signals. We present a method to reconstruct the CHWP rotation angle that achieves a noise level of 0.16 $\mu\mathrm{rad\sqrt{s}}$, meeting our requirement.

astro-ph.IM↗

arXiv2026

The Simons Observatory: Rotation Performance of Cryogenic Half-Wave Plate Polarization Modulators

We present the on-site rotation performance of the first three cryogenic continuously rotating half-wave plate (HWP) polarization modulators for the Simons Observatory small aperture telescopes (SATs). The SATs operate at an altitude of 5200 m in the Atacama Desert in northern Chile, and measure the degree-scale cosmic microwave background polarization to search for primordial $B$-mode polarization. To this end, the SATs employ a 505 mm diameter 50 K cryogenic HWP polarization modulator to suppress atmospheric $1/f$ noise and to mitigate systematic uncertainties. We present methods for reconstructing the rotation of our polarization modulators, enabling detailed evaluations of their rotation angle accuracy, stability, displacements, and vibrations. We achieve the required rotation angle accuracy in more than 99.9% of observations, with a median noise level of 0.16 $\mu$rad$\sqrt{\text{s}}$. We also achieve one-dimensional measurement of the rotor displacement with an accuracy of 0.06 $\mu\text{m}\sqrt{\text{s}}$. Our results demonstrate the on-site rotation performance, rotation angle reconstruction method, and robustness of the polarization angle modulators. This is a crucial step towards achieving the SAT science goals.

astro-ph.IM↗

arXiv2025

The Simons Observatory: Detector Polarization Angle Calibration using Sparse Wire Grid with Initial Data Sets of the Small Aperture Telescope

Improved measurements of $B$-modes in the cosmic microwave background can be obtained through accurate calibration of the orientation of detector antennas as projected onto the sky. Miscalibration of the detector polarization angle leads to a leakage of $E$-modes into $B$-modes, which can bias the detection of the latter. To achieve a $\sigma(r)$ of 0.003, the Simons Observatory Small Aperture Telescopes are required to calibrate the global polarization angle on the sky with an accuracy ${\lesssim}0.1^\circ$. We demonstrate a fully remote-controllable calibration system using a ``sparse wire grid," which injects a rotatable linear polarized signal across the telescope's focal plane. This calibration system is installed and operational on a Small Aperture Telescope at its observing site at the Parque Astron\'omico in the Atacama desert in Chile. We developed a pipeline for the detector polarization angle calibration, and demonstrate it using initial data for 93~GHz and 145~GHz frequency bands. The observed distribution of detector polarization angles is in agreement with the instrument design. Statistical uncertainties for the relatively calibrated polarization angles are $0.02^\circ$ and $0.03^\circ$ at 93~GHz and 145~GHz, respectively. Systematic uncertainty was evaluated to be $0.08^\circ$ at the hardware development and fabrication stage. Their sum in quadrature is less than $0.1^\circ$.

astro-ph.IM↗

arXiv2025

Constraints on the polarization angle oscillations of the Crab Nebula with the Simons Array and its applications to the search for axion-like particles

We present a search for polarization oscillation of the Crab Nebula, also known as Tau A, at millimeter wavelengths using observations with the Simons Array, the successor experiment to POLARBEAR. We follow up on previous work by POLARBEAR using 90 GHz band data of the 2023 observing season of the Simons Array to evaluate the variability of Tau A's polarization angle. Tau A is widely used as a polarization angle calibration source in millimeter-wave astronomy, and thus it is necessary to validate the stability. Additionally, an interesting application of the time-resolved polarimetry of Tau A is to search for axion-like particles (ALPs). We do not detect a global signal across the frequencies considered in this analysis and place a median 95% upper bound of polarization oscillation amplitude $A<0.12^{\circ}$ over oscillation frequencies from 3.39 year$^{-1}$ to 1.50 day$^{-1}$. This constrains the ALP-photon coupling at a median 95% upper bound of $g_{a\gamma\gamma}< 3.84\times 10^{-12}\times\left(m_a/10^{-21}\,\mathrm{eV}\right)$ in the mass range from $4.4\times10^{-22}$ to $7.2\times10^{-20}$ eV, assuming the ALP constitutes all of dark matter, its field is a stochastic Gaussian field, and it is the sole source of Tau A's polarization angle oscillation. Additionally, we do not detect signal at the frequencies where 2.5$\sigma$ hints were previously reported by POLARBEAR, but we do not exclude these signals at the 95% confidence level.

astro-ph.CO↗

arXiv2025

The Simons Observatory: Large Diameter and Large Load-Capacity Superconducting Magnetic Bearing for a Millimeter-Wave Polarization Modulator

We present the design methodology and characterization of a superconducting magnetic bearing (SMB) system for the polarization modulator in the SAT-LF, one of the small aperture telescopes (SATs) in the Simons Observatory (SO) that is sensitive at 30/40 GHz frequency bands. SO is a ground-based cosmic microwave background (CMB) polarization experiment, with the SATs specifically aiming to search for primordial parity-odd polarization anisotropies at degree scales. Each SAT is equipped with a cryogenic, continuously rotating half-wave plate (HWP) as a polarization modulator to mitigate atmospheric $1/f$ noise and instrumental systematics. The HWP system employs an SMB, consisting of a ring-shaped magnet and superconductor, to achieve a 550 mm clear aperture and stable 2 Hz rotation at a temperature of around 50 K. One challenge for the HWP system in the SAT-LF is the large 35 kg load on the SMB due to the thicker HWP than in previous telescopes. Since the SMB stiffness is critical for maintaining the alignment of the HWP in the telescope, we developed a method to quantitatively predict the stiffness using finite element simulations with the so-called H-formulation. We evaluated the stiffness for various geometries of the magnet and superconductor, thereby optimizing their dimensions. The prediction is in excellent agreement with experimental measurements of the fabricated SMB, demonstrating a $\sim$5\% accuracy. We also demonstrated that the SMB achieves sufficiently low friction-induced heat dissipation, measured at 0.26 W when rotating at 2 Hz. The design methodology and the implementation of the SMB demonstrated here not only provides an enabling technology for the SO SAT-LF, but also is a crucial stepping stone for future CMB experiments that make use of HWP polarization modulators.

astro-ph.IM↗

arXiv2024

The Simons Observatory: Design, integration, and testing of the small aperture telescopes

The Simons Observatory (SO) is a cosmic microwave background (CMB) survey experiment that includes small-aperture telescopes (SATs) observing from an altitude of 5,200 m in the Atacama Desert in Chile. The SO SATs will cover six spectral bands between 27 and 280 GHz to search for primordial B-modes to a sensitivity of $\sigma(r)=0.002$, with quantified systematic errors well below this value. Each SAT is a self-contained cryogenic telescope with a 35$^\circ$ field of view, 42 cm diameter optical aperture, 40 K half-wave plate, 1 K refractive optics, and $<0.1$ K focal plane that holds $>12,000$ TES detectors. We describe the nominal design of the SATs and present details about the integration and testing for one operating at 93 and 145 GHz.

astro-ph.IM↗

arXiv2024

The Simons Observatory: Development and Optical Evaluation of Achromatic Half-Wave Plates

The Simons Observatory (SO) experiment is a cosmic microwave background (CMB) experiment located in the Atacama Desert, Chile. The SO' s small aperture telescopes (SATs) consist of three telescopes designed for precise CMB polarimetry at large angular scales. Each SAT uses a cryogenic rotating half-wave plate (HWP) as a polarization modulator to mitigate atmospheric 1/f noise and other systematics. To realize efficient polarization modulation over the observation bands, we fabricated an achromatic HWP (AHWP) consisting of three sapphire plates with anti-reflection coatings. The AHWP is designed to have broadband modulation efficiency and transmittance. This paper reports on the design and the preliminary characterization of the AHWPs for SATs.

astro-ph.IM↗

arXiv2018

A large-diameter cryogenic rotation stage for half-wave plate polarization modulation on the POLARBEAR-2 experiment

We describe the design of a cryogenic rotation stage (CRS) for use with the cryogenic half-wave plate (CHWP) polarization modulator on the POLARBEAR-2b and POLARBEAR-2c (PB2b/c) cosmic microwave background (CMB) experiments, the second and third installments of the Simons Array. Rapid modulation of the CMB polarization signal using a CHWP suppresses 1/f contamination due to atmospheric turbulence and allows a single polarimeter to measure both polarization states, mitigating systematic effects that arise when differencing orthogonal detectors. To modulate the full detector array while avoiding excess photon loading due to thermal emission, the CHWP must have a clear-aperture diameter of > 450 mm and be cooled to < 100 K. We have designed a 454-mm-clear-aperture, < 65 K CRS using a superconducting magnetic bearing driven by a synchronous magnetic motor. We present the specifications for the CRS, its interfacing to the PB2b/c receiver cryostat, its performance in a stand-alone test, and plans for future work.

astro-ph.IM↗