arXiv subjects

Burkhard Stiller

Publications and source records attributed to Burkhard Stiller.

51 records · Page 3Linked to original sources

arXiv2024

Empirical and Theoretical Analysis of Liquid Staking Protocols

Liquid staking has become the largest category of decentralized finance protocols in terms of total value locked. However, few studies exist on its implementation designs or underlying risks. The liquid staking protocols allow for earning staking rewards without the disadvantage of locking the capital at the validators. Yet, they are seen by some as a threat to the Proof-of-Stake blockchain security. This paper is the first work that classifies liquid staking implementations. It analyzes the historical performance of major liquid staking tokens in comparison to the traditional staking for the largest Proof-of-Stake blockchains. Furthermore, the research investigates the impact of centralization, maximum extractable value and the migration of Ethereum from Proof-of-Work to Proof-of-Stake on the tokens' performance. Examining the tracking error of the liquid stacking providers to the staking rewards shows that they are persistent and cannot be explained by macro-variables of the currency, such as the variance or return.

cs.CR↗

arXiv2023

MTFS: a Moving Target Defense-Enabled File System for Malware Mitigation

Ransomware has remained one of the most notorious threats in the cybersecurity field. Moving Target Defense (MTD) has been proposed as a novel paradigm for proactive defense. Although various approaches leverage MTD, few of them rely on the operating system and, specifically, the file system, thereby making them dependent on other computing devices. Furthermore, existing ransomware defense techniques merely replicate or detect attacks, without preventing them. Thus, this paper introduces the MTFS overlay file system and the design and implementation of three novel MTD techniques implemented on top of it. One delaying attackers, one trapping recursive directory traversal, and another one hiding file types. The effectiveness of the techniques are shown in two experiments. First, it is shown that the techniques can delay and mitigate ransomware on real IoT devices. Secondly, in a broader scope, the solution was confronted with 14 ransomware samples, highlighting that it can save 97% of the files.

cs.CR↗

arXiv2023

RCVaR: an Economic Approach to Estimate Cyberattacks Costs using Data from Industry Reports

Digitization increases business opportunities and the risk of companies being victims of devastating cyberattacks. Therefore, managing risk exposure and cybersecurity strategies is essential for digitized companies that want to survive in competitive markets. However, understanding company-specific risks and quantifying their associated costs is not trivial. Current approaches fail to provide individualized and quantitative monetary estimations of cybersecurity impacts. Due to limited resources and technical expertise, SMEs and even large companies are affected and struggle to quantify their cyberattack exposure. Therefore, novel approaches must be placed to support the understanding of the financial loss due to cyberattacks. This article introduces the Real Cyber Value at Risk (RCVaR), an economical approach for estimating cybersecurity costs using real-world information from public cybersecurity reports. RCVaR identifies the most significant cyber risk factors from various sources and combines their quantitative results to estimate specific cyberattacks costs for companies. Furthermore, RCVaR extends current methods to achieve cost and risk estimations based on historical real-world data instead of only probability-based simulations. The evaluation of the approach on unseen data shows the accuracy and efficiency of the RCVaR in predicting and managing cyber risks. Thus, it shows that the RCVaR is a valuable addition to cybersecurity planning and risk management processes.

cs.CR↗

arXiv2023

FederatedTrust: A Solution for Trustworthy Federated Learning

The rapid expansion of the Internet of Things (IoT) and Edge Computing has presented challenges for centralized Machine and Deep Learning (ML/DL) methods due to the presence of distributed data silos that hold sensitive information. To address concerns regarding data privacy, collaborative and privacy-preserving ML/DL techniques like Federated Learning (FL) have emerged. However, ensuring data privacy and performance alone is insufficient since there is a growing need to establish trust in model predictions. Existing literature has proposed various approaches on trustworthy ML/DL (excluding data privacy), identifying robustness, fairness, explainability, and accountability as important pillars. Nevertheless, further research is required to identify trustworthiness pillars and evaluation metrics specifically relevant to FL models, as well as to develop solutions that can compute the trustworthiness level of FL models. This work examines the existing requirements for evaluating trustworthiness in FL and introduces a comprehensive taxonomy consisting of six pillars (privacy, robustness, fairness, explainability, accountability, and federation), along with over 30 metrics for computing the trustworthiness of FL models. Subsequently, an algorithm named FederatedTrust is designed based on the pillars and metrics identified in the taxonomy to compute the trustworthiness score of FL models. A prototype of FederatedTrust is implemented and integrated into the learning process of FederatedScope, a well-established FL framework. Finally, five experiments are conducted using different configurations of FederatedScope to demonstrate the utility of FederatedTrust in computing the trustworthiness of FL models. Three experiments employ the FEMNIST dataset, and two utilize the N-BaIoT dataset considering a real-world IoT security use case.

cs.CR↗

arXiv2023

RansomAI: AI-powered Ransomware for Stealthy Encryption

Cybersecurity solutions have shown promising performance when detecting ransomware samples that use fixed algorithms and encryption rates. However, due to the current explosion of Artificial Intelligence (AI), sooner than later, ransomware (and malware in general) will incorporate AI techniques to intelligently and dynamically adapt its encryption behavior to be undetected. It might result in ineffective and obsolete cybersecurity solutions, but the literature lacks AI-powered ransomware to verify it. Thus, this work proposes RansomAI, a Reinforcement Learning-based framework that can be integrated into existing ransomware samples to adapt their encryption behavior and stay stealthy while encrypting files. RansomAI presents an agent that learns the best encryption algorithm, rate, and duration that minimizes its detection (using a reward mechanism and a fingerprinting intelligent detection system) while maximizing its damage function. The proposed framework was validated in a ransomware, Ransomware-PoC, that infected a Raspberry Pi 4, acting as a crowdsensor. A pool of experiments with Deep Q-Learning and Isolation Forest (deployed on the agent and detection system, respectively) has demonstrated that RansomAI evades the detection of Ransomware-PoC affecting the Raspberry Pi 4 in a few minutes with >90% accuracy.

cs.CR↗

arXiv2023

SECAdvisor: a Tool for Cybersecurity Planning using Economic Models

Cybersecurity planning is challenging for digitized companies that want adequate protection without overspending money. Currently, the lack of investments and perverse economic incentives are the root cause of cyberattacks, which results in several economic impacts on companies worldwide. Therefore, cybersecurity planning has to consider technical and economic dimensions to help companies achieve a better cybersecurity strategy. This article introduces SECAdvisor, a tool to support cybersecurity planning using economic models. SECAdvisor allows to (a) understand the risks and valuation of different businesses' information, (b) calculate the optimal investment in cybersecurity for a company, (c) receive a recommendation of protections based on the budget available and demands, and (d) compare protection solutions in terms of cost-efficiency. Furthermore, evaluations on usability and real-world training activities performed using SECAdvisor are discussed.

cs.CR↗

arXiv2023

Real-time Tracking of Medical Devices: An Analysis of Multilateration and Fingerprinting Approaches

Hospital infrastructures are always in evidence in periods of crisis, such as natural disasters or pandemic events, under stress. The recent COVID-19 pandemic exposed several inefficiencies in hospital systems over a relatively long period. Among these inefficiencies are human factors, such as how to manage staff during periods of high demand, and technical factors, including the management of Portable Medical Devices (PMD), such as mechanical ventilators, capnography monitors, infusion pumps, or pulse oximeters. These devices, which are vital for monitoring patients or performing different procedures, were found to have a high turnover during high-demand, resulting in inefficiencies and more pressure on medical teams. Thus, the work PMD-Track evaluates in detail two popular indoor tracking approaches concerning their accuracy, placement of beacons, and economic impacts. The key novelty of PMD-Track relies on using smartphones provided to hospital employees, replacing typical stationary gateways spread across a hospital, functioning as mobile gateways with a front-end that assists staff in locating PMDs. As employees approach tagged PMDs, their smartphone automatically updates the location of spotted PMDs in real-time, providing room-level localization data with up to 83% accuracy for fingerprinting and 35% for multilateration. In addition, fingerprinting is 45% cheaper than multilateration over the course of five years. Practical experiments were evaluated based on two locations in Zürich, Switzerland.

cs.NI↗

arXiv2022

RL and Fingerprinting to Select Moving Target Defense Mechanisms for Zero-day Attacks in IoT

Cybercriminals are moving towards zero-day attacks affecting resource-constrained devices such as single-board computers (SBC). Assuming that perfect security is unrealistic, Moving Target Defense (MTD) is a promising approach to mitigate attacks by dynamically altering target attack surfaces. Still, selecting suitable MTD techniques for zero-day attacks is an open challenge. Reinforcement Learning (RL) could be an effective approach to optimize the MTD selection through trial and error, but the literature fails when i) evaluating the performance of RL and MTD solutions in real-world scenarios, ii) studying whether behavioral fingerprinting is suitable for representing SBC's states, and iii) calculating the consumption of resources in SBC. To improve these limitations, the work at hand proposes an online RL-based framework to learn the correct MTD mechanisms mitigating heterogeneous zero-day attacks in SBC. The framework considers behavioral fingerprinting to represent SBCs' states and RL to learn MTD techniques that mitigate each malicious state. It has been deployed on a real IoT crowdsensing scenario with a Raspberry Pi acting as a spectrum sensor. More in detail, the Raspberry Pi has been infected with different samples of command and control malware, rootkits, and ransomware to later select between four existing MTD techniques. A set of experiments demonstrated the suitability of the framework to learn proper MTD techniques mitigating all attacks (except a harmfulness rootkit) while consuming <1 MB of storage and utilizing <55% CPU and <80% RAM.

cs.CR↗

arXiv2022

Analyzing the Robustness of Decentralized Horizontal and Vertical Federated Learning Architectures in a Non-IID Scenario

Federated learning (FL) allows participants to collaboratively train machine and deep learning models while protecting data privacy. However, the FL paradigm still presents drawbacks affecting its trustworthiness since malicious participants could launch adversarial attacks against the training process. Related work has studied the robustness of horizontal FL scenarios under different attacks. However, there is a lack of work evaluating the robustness of decentralized vertical FL and comparing it with horizontal FL architectures affected by adversarial attacks. Thus, this work proposes three decentralized FL architectures, one for horizontal and two for vertical scenarios, namely HoriChain, VertiChain, and VertiComb. These architectures present different neural networks and training protocols suitable for horizontal and vertical scenarios. Then, a decentralized, privacy-preserving, and federated use case with non-IID data to classify handwritten digits is deployed to evaluate the performance of the three architectures. Finally, a set of experiments computes and compares the robustness of the proposed architectures when they are affected by different data poisoning based on image watermarks and gradient poisoning adversarial attacks. The experiments show that even though particular configurations of both attacks can destroy the classification performance of the architectures, HoriChain is the most robust one.

cs.LG↗

arXiv2022

A Lightweight Moving Target Defense Framework for Multi-purpose Malware Affecting IoT Devices

Malware affecting Internet of Things (IoT) devices is rapidly growing due to the relevance of this paradigm in real-world scenarios. Specialized literature has also detected a trend towards multi-purpose malware able to execute different malicious actions such as remote control, data leakage, encryption, or code hiding, among others. Protecting IoT devices against this kind of malware is challenging due to their well-known vulnerabilities and limitation in terms of CPU, memory, and storage. To improve it, the moving target defense (MTD) paradigm was proposed a decade ago and has shown promising results, but there is a lack of IoT MTD solutions dealing with multi-purpose malware. Thus, this work proposes four MTD mechanisms changing IoT devices' network, data, and runtime environment to mitigate multi-purpose malware. Furthermore, it presents a lightweight and IoT-oriented MTD framework to decide what, when, and how the MTD mechanisms are deployed. Finally, the efficiency and effectiveness of the framework and MTD mechanisms are evaluated in a real-world scenario with one IoT spectrum sensor affected by multi-purpose malware.

cs.CR↗

arXiv2022

Studying the Robustness of Anti-adversarial Federated Learning Models Detecting Cyberattacks in IoT Spectrum Sensors

Device fingerprinting combined with Machine and Deep Learning (ML/DL) report promising performance when detecting cyberattacks targeting data managed by resource-constrained spectrum sensors. However, the amount of data needed to train models and the privacy concerns of such scenarios limit the applicability of centralized ML/DL-based approaches. Federated learning (FL) addresses these limitations by creating federated and privacy-preserving models. However, FL is vulnerable to malicious participants, and the impact of adversarial attacks on federated models detecting spectrum sensing data falsification (SSDF) attacks on spectrum sensors has not been studied. To address this challenge, the first contribution of this work is the creation of a novel dataset suitable for FL and modeling the behavior (usage of CPU, memory, or file system, among others) of resource-constrained spectrum sensors affected by different SSDF attacks. The second contribution is a pool of experiments analyzing and comparing the robustness of federated models according to i) three families of spectrum sensors, ii) eight SSDF attacks, iii) four scenarios dealing with unsupervised (anomaly detection) and supervised (binary classification) federated models, iv) up to 33% of malicious participants implementing data and model poisoning attacks, and v) four aggregation functions acting as anti-adversarial mechanisms to increase the models robustness.

cs.CR↗

arXiv2022

CyberSpec: Intelligent Behavioral Fingerprinting to Detect Attacks on Crowdsensing Spectrum Sensors

Integrated sensing and communication (ISAC) is a novel paradigm using crowdsensing spectrum sensors to help with the management of spectrum scarcity. However, well-known vulnerabilities of resource-constrained spectrum sensors and the possibility of being manipulated by users with physical access complicate their protection against spectrum sensing data falsification (SSDF) attacks. Most recent literature suggests using behavioral fingerprinting and Machine/Deep Learning (ML/DL) for improving similar cybersecurity issues. Nevertheless, the applicability of these techniques in resource-constrained devices, the impact of attacks affecting spectrum data integrity, and the performance and scalability of models suitable for heterogeneous sensors types are still open challenges. To improve limitations, this work presents seven SSDF attacks affecting spectrum sensors and introduces CyberSpec, an ML/DL-oriented framework using device behavioral fingerprinting to detect anomalies produced by SSDF attacks affecting resource-constrained spectrum sensors. CyberSpec has been implemented and validated in ElectroSense, a real crowdsensing RF monitoring platform where several configurations of the proposed SSDF attacks have been executed in different sensors. A pool of experiments with different unsupervised ML/DL-based models has demonstrated the suitability of CyberSpec detecting the previous attacks within an acceptable timeframe.

cs.CR↗

arXiv2021

On-Chain IoT Data Modification in Blockchains

In recent years, the interest growth in the Blockchains (BC) and Internet-of-Things (IoT) integration -- termed as BIoT -- for more trust via decentralization has led to great potentials in various use cases such as health care, supply chain tracking, and smart cities. A key element of BIoT ecosystems is the data transactions (TX) that include the data collected by IoT devices. BIoT applications face many challenges to comply with the European General Data Protection Regulation (GDPR) i.e., enabling users to hold on to their rights for deleting or modifying their data stored on publicly accessible and immutable BCs. In this regard, this paper identifies the requirements of BCs for being GDPR compliant in BIoT use cases. Accordingly, an on-chain solution is proposed that allows fine-grained modification (update and erasure) operations on TXs' data fields within a BC. The proposed solution is based on a cryptographic primitive called Chameleon Hashing. The novelty of this approach is manifold. BC users have the authority to update their data, which are addressed at the TX level with no side-effects on the block or chain. By performing and storing the data updates, all on-chain, traceability and verifiability of the BC are preserved. Moreover, the compatibility with TX aggregation mechanisms that allow the compression of the BC size is maintained.

cs.CR↗

arXiv2020

Proverum: A Hybrid Public Verifiability and Decentralized Identity Management

Trust in electoral processes is fundamental for democracies. Further, the identity management of citizen data is crucial, because final tallies cannot be guaranteed without the assurance that every final vote was cast by an eligible voter. In order to establish a basis for a hybrid public verifiability of voting, this work (1) introduces Proverum, an approach combining a private environment based on private permissioned Distributed Ledgers with a public environment based on public Blockchains, (2) describes the application of the Proverum architecture to the Swiss Remote Postal Voting system, mitigating threats present in the current system, and (3) addresses successfully the decentralized identity management in a federalistic state.

cs.CR↗

arXiv2014

Bypassing Cloud Providers' Data Validation to Store Arbitrary Data

A fundamental Software-as-a-Service (SaaS) characteristic in Cloud Computing is to be application-specific; depending on the application, Cloud Providers (CPs) restrict data formats and attributes allowed into their servers via a data validation process. An ill-defined data validation process may directly impact both security (e.g. application failure, legal issues) and accounting and charging (e.g. trusting metadata in file headers). Therefore, this paper investigates, evaluates (by means of tests), and discusses data validation processes of popular CPs. A proof of concept system was thus built, implementing encoders carefully crafted to circumvent data validation processes, ultimately demonstrating how large amounts of unaccounted, arbitrary data can be stored into CPs.

cs.NI↗