arXiv subjects

Byunghyun Lee

Publications and source records attributed to Byunghyun Lee.

11 recordsLinked to original sources

arXiv2026

Parasitic MIMO Beamforming for Multi-Active Multi-Parasitic Antenna Arrays with Binary Control

In 6G, MIMO dimensions continue to scale, yet the increased cost, power consumption, and hardware complexity associated with growing RF chains limit practical deployment. Parasitic antennas offer a promising alternative that can add spatial degrees of freedom and array gain without a proportional increase in RF chains. From a communication perspective, prior work on parasitic antennas has primarily focused on adjusting continuous reactance values using varactors, but such varactor-based tuning has increased cost and complexity in the analog control and practical RF circuit design. This paper proposes a multi-active multi-parasitic antenna (MAMP) architecture with binary controllers, where each parasitic element operates in one of two discrete reactance states. To validate the practicality of the system, we experimentally identify array geometries that best match the actual radiation patterns with those of the mathematical model through HFSS simulations. We express the induced current vector as a quadratic function of the binary state vector, and propose a pair of discrete reactance values that minimize the relative error of the proposed model while being implementable with off-the-shelf RF components. With these results, we develop two transmit beamforming codebook designs based on the generalized Lloyd algorithm. The first design exhaustively searches for all possible binary combinations to find the optimal solution, representing the theoretical upper limits of our framework. The second design leverages eigenvalue perturbation to significantly reduce computational complexity, making it suitable for online adaptation. Extensive simulations under various channel scenarios demonstrate that the proposed codebook designs enable MAMP with only few active antennas to achieve beamforming performance comparable to fully active antenna arrays with significantly more active antennas.

eess.SP↗

arXiv2026

Simulation-Driven Ensemble Machine Learning for Robust and Generalizable Path Loss Prediction

Machine learning has emerged as a promising approach to path loss prediction, yet its effectiveness often degrades when measurement data are scarce. To address this limitation, we propose an ensemble-based machine learning framework that integrates real measurements with synthetic data generated using a lidar-based simulator. The simulator provides broad spatial coverage through static path loss values that capture terrain variations and physical obstacles in the propagation environment. A dynamically weighted ensemble then combines simulation results with measured data, balancing the contribution of both data sources and improving generalization across diverse environments. To further mitigate the effects of limited measurements, we incorporate the Synthetic Minority Over-sampling Technique (SMOTE), a data augmentation technique that synthesizes additional samples through interpolation between measurements while preserving their statistical properties. By leveraging simulation data, SMOTE, and engineered propagation features, the proposed framework captures geographical and physical variability, enabling adaptability across urban, suburban, residential, industrial, and rural environments. Experimental results demonstrate that the proposed method achieves up to a 50% reduction in mean absolute error (MAE), compared with models trained solely on real data, and up to a 25% improvement relative to models trained exclusively on synthetic data, particularly for cross-environment generalization. These findings highlight the effectiveness of combining simulation-based synthetic data with SMOTE to overcome data scarcity and enhance the model's generalization ability. Overall, the proposed framework provides a robust and practical solution for path loss prediction across diverse environments with limited measurement data, supporting cost-effective planning and optimization of wireless networks.

eess.SP↗

arXiv2026

Integrated Polarimetric Sensing and Communication with Polarization-Reconfigurable Arrays

Polarization diversity offers a cost- and space-efficient solution to enhance the performance of integrated sensing and communication systems. Polarimetric sensing exploits the signal's polarity to extract details about the target such as shape, pose, and material composition. From a communication perspective, polarization diversity can enhance the reliability and throughput of communication channels. This paper proposes an integrated polarimetric sensing and communication (IPSAC) system that jointly conducts polarimetric sensing and communications. We study the use of single-port polarization-reconfigurable antennas to adapt to channel depolarization effects, without the need for separate RF chains for each polarization. We address two core sensing tasks in IPSAC systems, target parameter estimation and target detection. For parameter estimation, we consider the problem of minimizing the mean-squared error (MSE) of the target depolarization parameter estimate, which is a critical task for various polarimetric radar applications such as rainfall forecasting, vegetation identification, and target classification. To address this nonconvex problem, we apply semi-definite relaxation (SDR) and majorization-minimization (MM) optimization techniques. Next, we consider a design that maximizes the target SINR leveraging prior knowledge of the target and clutter depolarization statistics to enhance the target detection performance. To tackle this problem, we modify the solution developed for MSE minimization subject to the same quality-of-service (QoS) constraints. Extensive simulations show that the proposed polarization reconfiguration method substantially improves the depolarization parameter MSE. Furthermore, the proposed method considerably boosts the target SINR due to polarization diversity, particularly in cluttered environments.

eess.SP↗

arXiv2025

Constant Modulus Waveform Design with Space-Time Sidelobe Reduction for DFRC Systems

Dual-function radar-communication (DFRC) is a key enabler of location-based services for next-generation communication systems. In this paper, we investigate the problem of designing constant modulus multiple-input multiple-output (MIMO) waveforms for DFRC systems. We jointly shape the spatial beam pattern and ambiguity function of the transmit space-time matrix to improve target localization accuracy and enhance target resolution in cluttered environments. For communications, we employ constructive interference (CI)-based precoding, which exploits multi-user and radar-induced interference to enhance MIMO symbol detection. We develop two novel solution algorithms based on majorization-minimization (MM) and the linearized alternating direction method of multipliers (LADMM) principles. For the MM approach, we introduce a novel diagonal majorizer for complex quadratic functions, yielding a tighter surrogate and faster convergence than standard largest eigenvalue-based surrogates. After majorization, we decompose the approximated problem into independent subproblems that can be efficiently solved via parallelizable coordinate descent. To accommodate large MIMO dimensions, we further develop a low-complexity LADMM solution. We combine a biconvex reformulation and first-order proximal approximations to handle the nonconvex quartic objective without requiring costly matrix inversions. We evaluate the performance of the proposed algorithms in comparison to the existing DFRC algorithm. Simulation results demonstrate that the proposed algorithms can substantially enhance target detection and imaging performance due to the reduction of space-time sidelobes.

eess.SP↗

arXiv2025

Distributed Machine Learning Approach for Low-Latency Localization in Cell-Free Massive MIMO Systems

Low-latency localization is critical in cellular networks to support real-time applications requiring precise positioning. In this paper, we propose a distributed machine learning (ML) framework for fingerprint-based localization tailored to cell-free massive multiple-input multiple-output (MIMO) systems, an emerging architecture for 6G networks. The proposed framework enables each access point (AP) to independently train a Gaussian process regression model using local angle-of-arrival and received signal strength fingerprints. These models provide probabilistic position estimates for the user equipment (UE), which are then fused by the UE with minimal computational overhead to derive a final location estimate. This decentralized approach eliminates the need for fronthaul communication between the APs and the central processing unit (CPU), thereby reducing latency. Additionally, distributing computational tasks across the APs alleviates the processing burden on the CPU compared to traditional centralized localization schemes. Simulation results demonstrate that the proposed distributed framework achieves localization accuracy comparable to centralized methods, despite lacking the benefits of centralized data aggregation. Moreover, it effectively reduces uncertainty of the location estimates, as evidenced by the 95\% covariance ellipse. The results highlight the potential of distributed ML for enabling low-latency, high-accuracy localization in future 6G networks.

eess.SP↗

arXiv2025

Hybrid Fingerprint-based Positioning in Cell-Free Massive MIMO Systems

Recently, there has been an increasing interest in 6G technology for integrated sensing and communications, where positioning stands out as a key application. In the realm of 6G, cell-free massive multiple-input multiple-output (MIMO) systems, featuring distributed base stations equipped with a large number of antennas, present an abundant source of angle-of-arrival (AOA) information that could be exploited for positioning applications. In this paper we leverage this AOA information at the base stations using the multiple signal classification (MUSIC) algorithm, in conjunction with received signal strength (RSS) for positioning through Gaussian process regression (GPR). An AOA fingerprint database is constructed by capturing the angle data from multiple locations across the network area and is combined with RSS data from the same locations to form a hybrid fingerprint which is then used to train a GPR model employing a squared exponential kernel. The trained regression model is subsequently utilized to estimate the location of a user equipment. Simulations demonstrate that the GPR model with hybrid input achieves better positioning accuracy than traditional GPR models utilizing RSS-only and AOA-only inputs.

eess.SP↗

arXiv2025

Spatial-Division ISAC: A Practical Waveform Design Strategy via Null-Space Superimposition

Integrated sensing and communications (ISAC) is a key enabler of new applications, such as precision agriculture, extended reality (XR), and digital twins, for 6G wireless systems. However, the implementation of ISAC technology is very challenging due to practical constraints such as high complexity. In this paper, we introduce a novel ISAC waveform design strategy, called the spatial-division ISAC (SD-ISAC) waveform, which simplifies the ISAC waveform design problem by decoupling it into separate communication and radar waveform design tasks. Specifically, the proposed strategy leverages the null-space of the communication channel to superimpose sensing signals onto communication signals without interference. This approach offers multiple benefits, including reduced complexity and the reuse of existing communication and radar waveforms. We then address the problem of optimizing the spatial and temporal properties of the proposed waveform. We develop a low-complexity beampattern matching algorithm, leveraging a majorization-minimization (MM) technique. Furthermore, we develop a range sidelobe suppression algorithm based on manifold optimization. We provide comprehensive discussions on the practical advantages and potential challenges of the proposed method, including null-space feedback. We evaluate the performance of the proposed waveform design algorithm through extensive simulations. Simulation results show that the proposed method can provide similar or even superior performance to existing ISAC algorithms while reducing computation time significantly.

eess.SP↗

arXiv2024

Ambient IoT: Communications Enabling Precision Agriculture

One of the most intriguing 6G vertical markets is precision agriculture, where communications, sensing, control, and robotics technologies are used to improve agricultural outputs and decrease environmental impact. Ambient IoT (A-IoT), which uses a network of devices that harvest ambient energy to enable communications, is expected to play an important role in agricultural use cases due to its low costs, simplicity, and battery-free (or battery-assisted) operation. In this paper, we review the use cases of precision agriculture and discuss the challenges. We discuss how A-IoT can be used for precision agriculture and compare it with other ambient energy source technologies. We also discuss research directions related to both A-IoT and precision agriculture.

eess.SP↗

arXiv2024

Constant Modulus Waveform Design with Block-Level Interference Exploitation for DFRC Systems

Dual-functional radar-communication (DFRC) is a promising technology where radar and communication functions operate on the same spectrum and hardware. In this paper, we propose an algorithm for designing constant modulus waveforms for DFRC systems. Particularly, we jointly optimize the correlation properties and the spatial beam pattern. For communication, we employ constructive interference-based block-level precoding (CI-BLP) to exploit distortion due to multi-user and radar transmission. We propose a majorization-minimization (MM)-based solution to the formulated problem. To accelerate convergence, we propose an improved majorizing function that leverages a novel diagonal matrix structure. We then evaluate the performance of the proposed algorithm through rigorous simulations. Simulation results demonstrate the effectiveness of the proposed approach and the proposed majorizer.

eess.SP↗

arXiv2024

Simulation-Enhanced Data Augmentation for Machine Learning Pathloss Prediction

Machine learning (ML) offers a promising solution to pathloss prediction. However, its effectiveness can be degraded by the limited availability of data. To alleviate these challenges, this paper introduces a novel simulation-enhanced data augmentation method for ML pathloss prediction. Our method integrates synthetic data generated from a cellular coverage simulator and independently collected real-world datasets. These datasets were collected through an extensive measurement campaign in different environments, including farms, hilly terrains, and residential areas. This comprehensive data collection provides vital ground truth for model training. A set of channel features was engineered, including geographical attributes derived from LiDAR datasets. These features were then used to train our prediction model, incorporating the highly efficient and robust gradient boosting ML algorithm, CatBoost. The integration of synthetic data, as demonstrated in our study, significantly improves the generalizability of the model in different environments, achieving a remarkable improvement of approximately 12dB in terms of mean absolute error for the best-case scenario. Moreover, our analysis reveals that even a small fraction of measurements added to the simulation training set, with proper data balance, can significantly enhance the model's performance.

cs.LG↗

arXiv2023

Fusing Channel and Sensor Measurements for Enhancing Predictive Beamforming in UAV-Assisted Massive MIMO Communications

Cellular-connected unmanned aerial vehicles (UAVs) represent a promising technology for extending the coverage of 5G and 6G networks in a cost-effective manner. Additionally, Massive multiple-input multiple-output (MIMO) serves as an effective solution to interference mitigation in cellular-connected UAV communications. In this letter, we propose a fusion of wireless and sensor data to enhance beam alignment for cellular-connected UAV massive MIMO communications. We develop a predictive beamforming framework, including the frame structure and predictive beamformer. Moreover, we employ an extended Kalman filter (EKF) to integrate channel and sensor data and provide the corresponding state-space and observation models. Simulation results demonstrate that the proposed scheme can improve position/orientation estimation accuracy significantly, leading to higher spectral efficiency.

eess.SP↗