arXiv subjects

C. A. Lindstrøm

Publications and source records attributed to C. A. Lindstrøm.

At least 19 recordsLinked to original sources

arXiv2026

Beam-driven plasma-wakefield acceleration

Beam-driven plasma-wakefield acceleration (PWFA) has emerged as a transformative technology with the potential to revolutionize the field of particle acceleration, especially toward compact accelerators for high-energy and high-power applications. Charged particle beams are used to excite density waves in plasma with accelerating fields reaching up to 100 GV/m, thousands of times stronger than the fields provided by radio-frequency cavities. Plasma-wakefield-accelerator research has matured over the span of four decades from basic concepts and proof-of-principle experiments to a rich and rapidly progressing sub-field with dedicated experimental facilities and state-of-the-art simulation codes. We review the physics, including theory of linear and nonlinear plasma wakefields as well as beam dynamics of both the wakefield driver and trailing bunches accelerating in the plasma wake, and address challenges associated with energy efficiency and preservation of beam quality. Advanced topics such as positron acceleration, self-modulation, internal injection, long-term plasma evolution and multistage acceleration are discussed. Simulation codes and major experiments are surveyed, spanning the use of electron, positron and proton bunches as wakefield drivers. Finally, we look ahead to future particle colliders and light sources based on plasma technology.

physics.acc-ph↗

arXiv2026

Achromatic optics using nonlinear plasma lenses for beam-quality preservation between plasma-accelerator stages

Plasma acceleration promises to deliver high-energy particle beams by combining, or staging, several low- or medium-energy accelerator stages. However, chromatic aberrations from the combination of high divergence and energy spread make it nontrivial to transport beams between plasma-accelerator stages. This paper describes a compact and achromatic lattice optimized for staging, based on a new beam-optics element; a nonlinear plasma lens. The lattice preserves emittance for energy spreads up to several percent and has a tunable $R_{56}$ that enables bunch-length preservation or a longitudinal self-correction mechanism. The performance and limitations of the plasma-lens-based solution are modeled analytically and numerically, and compared to a more conventional yet novel solution based on quadrupole and sextupole magnets. While functional, the latter is double the length, has about twice the number of elements and a narrower energy bandwidth. Lastly, a solution for scaling to TeV energies is described, in which all lengths scale with the square root of the energy and the deleterious effects of coherent and incoherent synchrotron radiation are mitigated.

physics.acc-ph↗

arXiv2026

First results from the E302 efficiency$\unicode{x2013}$instability experiment at the FACET-II facility

The beam-breakup (BBU) instability in plasma accelerators is seeded by a transverse offset between the driver and a trailing bunch. The BBU instability induces oscillations in the trailing bunch, which are detrimental to its beam quality. When the instability is large, assuming little mitigation from ion motion and energy spread, the beam suffers emittance growth, and charge can be kicked transversely out of the plasma channel. The detrimental effect on beam quality is substantially worse at high efficiencies, which places constraints on the achievable power efficiency in applications such as linear colliders, where maintaining the beam quality is required. In this paper, we present the first experimental signatures of the BBU instability in data taken in the E302 experiment at the FACET-II facility at SLAC National Accelerator Laboratory. We use a specific beam-optical setup and a novel method to probe for transverse instabilities on diagnostic screens downstream of a magnetic dipole spectrometer. We complement the analysis with full 3D particle-in-cell (PIC) simulations of the plasma interaction using similar driver and trailing bunch parameters on a simulated FACET-II spectrometer.

physics.acc-ph↗

arXiv2026

Driver-delay chicanes for a multistage plasma-based accelerator facility

The SPARTA project aims to design a medium-sized accelerator facility that facilitates new experiments in strong-field quantum electrodynamics using plasma-based accelerators. For this, we need several plasma stages and, therefore, several drivers. Drivers can be either an ultra-relativistic charged particle beam or a high-intensity laser beam. In case we use particle beams, we need a method of distributing these beams from a radio-frequency accelerator to the different plasma stages. A central part of this is a delay scheme that ensures temporal synchronization of the drivers. In this paper, we demonstrate how to achieve a 2 ns delay in $\sim$12 m, while keeping the first-order beam parameters periodic.

physics.acc-ph↗

arXiv2025

Plasma lens for the focusing of positron bunches

The development of effective focusing schemes for positron bunches in plasma accelerators remains a significant challenge, as nonlinear regimes fail to create stable focusing channels for positrons. This work presents a method for focusing and improving the quality of positron bunches using a plasma lens operating in the linear regime. Through numerical simulations, we investigate two distinct focused positron bunch profiles: a purely Gaussian bunch and an elongated, flat-top bunch with Gaussian rising and falling edges. For both configurations, the results demonstrate the capability to achieve high-quality transverse focusing. Furthermore, beyond focusing, the proposed system enables potential possibility to reduce energy spread of positron bunches of the sequence after precursor.

physics.plasm-ph↗

arXiv2025

ABEL: The Adaptable Beginning-to-End Linac simulation framework

We introduce ABEL, the Adaptable Beginning-to-End Linac simulation framework developed for agile design studies of plasma-based accelerators and colliders. ABEL's modular architecture allows users to simulate particle acceleration across various beamline components. The framework supports specialised codes such as HiPACE++, Wake-T, ELEGANT, GUINEA-PIG, CLICopti and ImpactX, which facilitate precise modelling of complex machine components. Key features include simplified models for addressing transverse instabilities, radiation reactions, and ion motion, alongside comprehensive diagnostics and optimisation capabilities. Our simulation studies focus on the HALHF plasma linac, examining tolerances for drive beam jitter, including effects of self-correction mechanisms. Simulation results demonstrate ABEL's ability to model emittance growth due to transverse instability and ion motion, highlighting the framework's adaptability in balancing simulation fidelity with computational efficiency. The findings point towards ABEL's potential for advancing compact accelerator designs and contribute to the broader goals of enhancing control and precision in plasma-based acceleration.

physics.acc-ph↗

arXiv2025

Ion-motion simulations of a plasma-wakefield experiment at FLASHForward

In plasma-based acceleration, an ultra-relativistic particle bunch$\unicode{x2014}$or an intense laser beam$\unicode{x2014}$is used to expel electrons from its propagation path, forming a wake that is devoid of electrons. The ions, being significantly more massive, are often assumed to be stationary. However, both theory and simulations suggest that any sufficiently dense electron bunch can trigger ion motion, and its effect must be taken into account. We simulate beam-driven plasma wakefields to identify key features$\unicode{x2014}$such as longitudinally dependent emittance growth$\unicode{x2014}$that could be observed in an experiment using plasma and beam parameters from the FLASHForward facility at DESY.

physics.acc-ph↗

arXiv2025

Updated baseline design for HALHF: the hybrid, asymmetric, linear Higgs factory

Particle physicists aim to construct a electron-positron Higgs factory as the next major particle collider. However, the high associated costs motivate the development of more affordable collider designs. Plasma-wakefield acceleration is a promising technology to this end. HALHF is a proposal for a Higgs factory that utilizes beam-driven plasma-wakefield acceleration to accelerate electrons to high energy with high gradient, while using radio-frequency acceleration to accelerate positrons to a lower energy. This asymmetry sidesteps a major difficulty in plasma acceleration: that of accelerating positrons with high efficiency and quality. Since publication, several challenges were identified in the original baseline design. We summarize the updated baseline design, which addresses these challenges, and describe the parameter- and cost-optimization process used to arrive at this design.

physics.acc-ph↗

arXiv2025

Preliminary results from the CLEAR nonlinear plasma lens experiment

Plasma lensing provides compact focusing of electron beams, since they offer strong focusing fields (kT/m) in both planes simultaneously. This becomes particularly important for highly diverging beams with a large energy spread such as those typically originating from plasma accelerators. The lens presented here is a nonlinear active plasma lens, with a controlled focusing-strength variation purposely introduced in one transverse direction. This lens is a key element of a larger transport lattice, core of the ERC project SPARTA, which aims to provide a solution for achromatic transport between plasma-accelerator stages. We report on preliminary experimental results from the CLEAR facility at CERN, which aims to probe the magnetic field structure of the lens using an electron beam, in search of the desired nonlinearity, together with 2D plasma simulation results.

physics.acc-ph↗

arXiv2025

Parametric mapping of the efficiency$\unicode{x2013}$instability relation in plasma-wakefield accelerators

High efficiency is essential for plasma-wakefield accelerators to be a cost-effective alternative in high-power applications, such as a linear collider. However, in a plasma-wakefield accelerator the beam-breakup instability can be seeded by a transverse offset between the driver and trailing bunch. This instability, which rapidly increases the oscillation amplitude of the trailing bunch, grows with higher power-transfer efficiency from the driver to the trailing bunch [V. Lebedev et al., Phys. Rev. Accel. Beams 21, 059901 (2018)]. In this paper, we use particle-in-cell simulations to investigate the efficiency$\unicode{x2013}$instability relation that constrains the driver-to-trailing-bunch power-transfer efficiency in beam-driven plasma accelerators. We test the relation using a grid of simulations across all parameters that affect the beam-breakup instability, assuming a uniform accelerating field (optimal beam loading) and no ion motion. We find that the previously proposed efficiency$\unicode{x2013}$instability relation represents a lower limit on the strength of the instability for a given efficiency. For each normalized wake radius, only a certain accelerating field reaches this lowest value of the transverse instability; deviating from this point can increase the growth rate by several orders of magnitude. Lastly, we highlight how the oscillation-amplitude growth of the trailing bunch can be reduced or damped with an initial uncorrelated energy spread and the presence of ion motion.

physics.acc-ph↗

arXiv2025

The SPARTA project: toward a demonstrator facility for multistage plasma acceleration

Plasma accelerators promise greatly reduced size and cost for future particle-accelerator facilities. However, several challenges remain to be solved; in particular that of coupling beams between plasma stages (i.e., staging) without beam-quality degradation, and that of ensuring a stable acceleration process. In order to mature the technology, it is also key to identify an application that requires staging and high stability but is not overly challenging in other parameters such as energy efficiency, beam quality and repetition rate. The goal of the ERC-funded project SPARTA is to solve the staging and stability problems of plasma acceleration, and to combine the solutions into a medium-scale multistage plasma-accelerator facility for such an application: experiments in strong-field quantum electrodynamics. Here, we discuss the three main objectives of the SPARTA project: developing a nonlinear plasma lens for staging, developing self-stabilization mechanisms, and providing a conceptual design for a multistage demonstrator facility.

physics.acc-ph↗

arXiv2025

Development of an achromatic spectrometer for a laser-wakefield-accelerator experiment

The large gradients of plasma-wakefield accelerators promise to shorten accelerators and reduce their financial and environmental costs. For such accelerators, a key challenge is the transport of beams with high divergence and energy spread. Achromatic optics is a potential solution that would allow staging of plasma accelerators without beam-quality degradation. For this, a nonlinear plasma lens is being developed within the SPARTA project. As a first application of this lens, we aim to implement an achromatic spectrometer for electron bunches produced by a laser-wakefield accelerator. This will greatly improve the resolution across the typically one to tens of percent energy spread bunches and therefore help diagnosis and optimization of the plasma interaction. We report on progress in designing such an experiment.

physics.acc-ph↗

arXiv2024

Development of a nonlinear plasma lens for achromatic beam transport

We introduce the new idea of a nonlinear active plasma lens, as part of a larger transport lattice for achromatic electron beam transport. The proposed implementation is based on using the Hall effect in a plasma and is motivated by 1D-hydrodynamic simulations. The manufactured design is presented, including its undergoing experimental characterisation on the CLEAR beam-line at CERN.

physics.acc-ph↗

arXiv2024

Energy Depletion and Re-Acceleration of Driver Electrons in a Plasma-Wakefield Accelerator

For plasma-wakefield accelerators to fulfil their potential for cost effectiveness, it is essential that their energy-transfer efficiency be maximized. A key aspect of this efficiency is the near-complete transfer of energy, or depletion, from the driver electrons to the plasma wake. Achieving full depletion is limited by the process of re-acceleration, which occurs when the driver electrons decelerate to non-relativistic energies, slipping backwards into the accelerating phase of the wakefield and being subsequently re-accelerated. Such re-acceleration is unambiguously observed here for the first time. At this re-acceleration limit, we measure a beam driver depositing (57 $\pm$ 3)\% of its energy into a 195-mm-long plasma. Combining this driver-to-plasma efficiency with previously measured plasma-to-beam and expected wall-plug-to-driver efficiencies, our result suggests that plasma-wakefield accelerators can in principle reach or even exceed the energy-transfer efficiency of conventional accelerators.

physics.acc-ph↗

arXiv2024

Emittance preservation in a plasma-wakefield accelerator

Radio-frequency particle accelerators are engines of discovery, powering high-energy physics and photon science, but are also large and expensive due to their limited accelerating fields. Plasma-wakefield accelerators (PWFAs) provide orders-of-magnitude stronger fields in the charge-density wave behind a particle bunch travelling in a plasma, promising particle accelerators of greatly reduced size and cost. However, PWFAs can easily degrade the beam quality of the bunches they accelerate. Emittance, which determines how tightly beams can be focused, is a critical beam quality in for instance colliders and free-electron lasers, but is particularly prone to degradation. We demonstrate, for the first time, emittance preservation in a high-gradient and high-efficiency PWFA while simultaneously preserving charge and energy spread. This establishes that PWFAs can accelerate without degradation$\unicode{x2014}$essential for energy boosters in photon science and multistage facilities for compact high-energy particle colliders.

physics.acc-ph↗

arXiv2024

Positron Acceleration in Plasma Wakefields

Plasma acceleration has emerged as a promising technology for future particle accelerators, particularly linear colliders. Significant progress has been made in recent decades toward high-efficiency and high-quality acceleration of electrons in plasmas. However, this progress does not generalize to acceleration of positrons, as plasmas are inherently charge asymmetric. Here, we present a comprehensive review of historical and current efforts to accelerate positrons using plasma wakefields. Proposed schemes that aim to increase the energy efficiency and beam quality are summarised and quantitatively compared. A dimensionless metric that scales with the luminosity-per-beam power is introduced, indicating that positron-acceleration schemes are currently below the ultimate requirement for colliders. The primary issue is electron motion; the high mobility of plasma electrons compared to plasma ions, which leads to non-uniform accelerating and focusing fields that degrade the beam quality of the positron bunch, particularly for high efficiency acceleration. Finally, we discuss possible mitigation strategies and directions for future research.

physics.acc-ph↗

arXiv2024

The E302 instability-versus-efficiency experiment at FACET-II

We discuss plans for the E302 instability-efficiency experiment, starting in 2024 at the recently upgraded FACET-II facility at SLAC National Accelerator Laboratory. The beam-breakup instability will be the main area of study for the E302 experiment. With the imaging spectrometer at FACET-II, we introduce a novel technique for observing and quantifying the amplitude growth of the trailing bunch due to the transverse instability. Using the transverse position on the spectrometer screen and the transfer matrix of the magnetic lattice used for the spectrometer, we aim to extract a $x'$-$E$ charge distribution that can be used to quantify the amplitude of the beam. By varying the trailing bunch's charge and, hence, the beam loading of the accelerating field, we aim to adjust the wake-to-beam power transfer efficiency in the E302 experiment. We plan to quantify the amplitude for different configurations of the beam charge and, hence, investigate the relationship between the beam-breakup instability and efficiency. We use a combination of particle-in-cell (PIC) codes to simulate a beam-driven plasma wakefield accelerator from start-to-end with a FACET-II-like spectrometer and demonstrate the methodology that will be used for the instability studies at the E302 experiment.

physics.acc-ph↗

arXiv2023

Status of and upgrade concepts for HALHF: the hybrid, asymmetric, linear Higgs factory

This contribution outlines the HALHF concept, which combines the high gradients achievable in plasma-wakefield acceleration with conventional radio-frequency acceleration. In HALHF, beam-driven plasma-wakefield cells are used to accelerate electrons to high energy. Because plasma-based acceleration of positrons is problematic, conventional RF acceleration is used but to much lower energy. The HALHF concept utilises not only asymmetric energies but also asymmetric bunch charges and asymmetric transverse emittances, leading to comparable luminosity to conventional facilities but much lower capital cost. Possible upgrades to the HALHF facility are discussed, in particular to the $\rm{t\bar{t}}$ threshold and to 550 GeV, where the Higgs self-coupling and $\rm{t\bar{t}}H$ coupling can be measured. Other upgrades include the provision of two interaction points, to implement a $γ$$\unicode{x2013}$$γ$ collider of two possible types and finally a symmetric high-energy collider if the problem of plasma-based positron acceleration can be solved.

physics.acc-ph↗