arXiv subjects

C. A. Potts

Publications and source records attributed to C. A. Potts.

16 recordsLinked to original sources

arXiv2026

Suppressing Cavity Frequency Noise Using a Kerr Nonlinearity

Resonance-frequency fluctuations can limit the sensitivity and stability of superconducting microwave cavities used for qubit readout, optomechanical displacement sensing, and magnetic flux detection. Here, we demonstrate the suppression of resonance-frequency fluctuations by locking a noisy nonlinear superconducting microwave cavity to a strong pump tone. The Kerr nonlinearity of this system, whereby the resonance frequency depends on the intracavity field amplitude, gives rise to an intrinsic feedback mechanism that enables passive stabilization without active external feedback. Using two-tone spectroscopy, we experimentally characterize the intrinsic nonlinear feedback mechanism and investigate its temporal stability through Allan deviation analysis. The frequency fluctuations of the locked cavity mode are reduced by nearly two orders of magnitude, reaching the $1/f$ noise floor, without continuous frequency tracking or active control. Kerr locking provides a general approach for self-stabilizing nonlinear microwave resonators by suppressing low-frequency cavity noise while preserving sensitivity to signals outside the locking bandwidth. This approach may benefit a broad range of systems, including SQUID-based resonators, optomechanical devices, and parametric amplifiers.

quant-ph↗

arXiv2025

Flux-modulated tunable interaction regimes in two strongly nonlinear oscillators

The ability to efficiently simulate a variety of interacting quantum systems on a single device is an overarching goal for digital and analog quantum simulators. In circuit quantum electrodynamical systems, strongly nonlinear superconducting oscillators are typically realized using transmon qubits, featuring a wide range of tunable couplings that are mainly achieved via flux-dependent inductive elements. Such controllability is highly desirable both for digital quantum information processing and for analog quantum simulations of various physical phenomena, such as arbitrary spin-spin interactions. Furthermore, broad tunability facilitates the study of driven-dissipative oscillator dynamics in previously unexplored parameter regimes. In this work, we demonstrate the ability to selectively activate different dynamical regimes between two strongly nonlinear oscillators using parametric modulation. In particular, our scheme enables access to regimes that are dominated by photon-hopping, two-mode squeezing, or cross-Kerr interactions. Finally, we observe level repulsion and attraction between Kerr-nonlinear oscillators in regimes where the nonlinearities exceed the coupling strengths and decay rates of the system. Our results could be used for realizing purely analog quantum simulators to study arbitrary spin systems as well as for exploring strongly nonlinear oscillator dynamics in previously unexplored interaction regimes.

quant-ph↗

arXiv2025

Generation of Large Amplitude Phonon States in Quantum Acoustics

The development of quantum acoustics has enabled the cooling of mechanical objects to their quantum ground state, generation of mechanical Fock-states, and Schrodinger cat states. Such demonstrations have made mechanical resonators attractive candidates for quantum information processing, metrology, and macroscopic tests of quantum mechanics. However, generating large-amplitude phonon states in quantum acoustic systems has been elusive. In this work, a single superconducting qubit coupled to a high-overtone bulk acoustic resonator is used to generate a large phonon population in an acoustic mode of a high-overtone resonator. We observe extended ringdowns of the qubit, confirming the generation of a large amplitude phonon state, and also observe an upper threshold behavior, a consequence of phonon quenching predicted by our model. This work provides a key tool for generating arbitrary phonon states in circuit quantum acoustodynamics, which is important for fundamental and quantum information applications.

quant-ph↗

arXiv2025

Strong Intrinsic Longitudinal Coupling in Circuit Quantum Electrodynamics

Radiation-pressure interactions between harmonic oscillators have enabled exquisite measurement precision and control, made possible by using strong sideband drives, enhancing the coupling rate while also linearizing the interaction. In this letter, we demonstrate a strong intrinsic longitudinal coupling, a circuit quantum electrodynamics analogue of the radiation-pressure interaction, between a transmon qubit and a linear microwave resonator. A red-detuned sideband drive results in an on-demand Jaynes-Cummings interaction with a high on-off ratio. We measure a longitudinal coupling rate an order of magnitude larger than all decay rates, placing the device in the strong coupling regime. The intrinsic longitudinal interaction demonstrated here will enable the development of high-connectivity quantum information processing hardware and the exploration of the gravitational decoherence of quantum objects.

quant-ph↗

arXiv2024

High-Coherence Quantum Acoustics with Planar Superconducting Qubits

Quantum acoustics is an emerging platform for hybrid quantum technologies enabling quantum coherent control of mechanical vibrations. High-overtone bulk acoustic resonators (HBARs) represent an attractive mechanical implementation of quantum acoustics due to their potential for exceptionally high mechanical coherence. Here, we demonstrate an implementation of high-coherence HBAR quantum acoustics integrated with a planar superconducting qubit architecture, demonstrating an acoustically-induced-transparency regime of high cooperativity and weak coupling, analogous to the electrically-induced transparency in atomic physics. Demonstrating high-coherence quantum acoustics with planar superconducting devices enables new applications for acoustic resonators in quantum technologies.

quant-ph↗

arXiv2024

Magnon-microwave backaction noise evasion in cavity magnomechanics

In cavity magnomechanical systems, magnetic excitations couple simultaneously with mechanical vibrations and microwaves, incorporating the tunability of magnetism and the long lifetimes of mechanical modes. Applications of such systems, such as thermometry and sensing, require precise measurement of the mechanical degree-of-freedom. In this paper, we propose a scheme for realizing backaction evading measurements of the mechanical vibrations in cavity magnomechanics. Our proposal involves driving the microwave cavity with two tones separated by twice the phonon frequency and with amplitudes satisfying a balance relation. We show that the minimum added imprecision noise is obtained for drives centered around the lower frequency magnon-microwave polaritons, which can beat the standard quantum limit at modest drive amplitudes. Our scheme is a simple and flexible way of engineering backaction evasion measurements that can be further generalized to other multimode systems.

cond-mat.mes-hall↗

arXiv2023

Multi-Tone Microwave Locking via Real-Time Feedback

Environmental noise coupling to mechanical experiments often introduces low-frequency fluctuations to the resonators, adding noise to measurements and reducing signal to noise. To counter these fluctuations, we demonstrate a dynamic feedback system implemented by the locking of a microwave drive to the noisy cavity. A homodyne interferometer scheme monitors the cavity resonance fluctuations due to low-frequency noise, which is mitigated by frequency-modulating (FM) the microwave generator. The feedback has a bandwidth of $400$ Hz, with a reduction of cavity fluctuations by $84\%$ integrating up to a bandwidth of $2$ kHz. Moreover, the cavity resonance frequency fluctuations are reduced by $73\%$. This scheme can be scaled to enable multi-tone experiments locked to the same feedback signal. As a demonstration, we apply the feedback to an optomechanical experiment and implement a cavity-locked, multi-tone mechanical measurement. As low-frequency cavity frequency noise can be a limiting factor in many experiments, the multi-tone microwave locking technique presented here is expected to be relevant for a wide range of fields of research.

physics.ins-det↗

arXiv2023

Magnomechanical backaction corrections due to coupling to higher order Walker modes and Kerr nonlinearities

The radiation pressure-like coupling between magnons and phonons in magnets can modify the phonon frequency (magnomechanical spring effect) and decay rate (magnomechanical decay) via dynamical backaction. Such effects have been recently observed by coupling the uniform magnon mode of a magnetic sphere (the Kittel mode) to a microwave cavity. In particular, the ability to evade backaction effects was demonstrated [C.A. Potts et al., arXiv:2211.13766 [quant-ph] (2022)], a requisite for applications such as magnomechanical based thermometry. However, deviations were observed from the predicted magnomechanical decay rate within the standard theoretical model. In this work, we account for these deviations by considering corrections due to (i) magnetic Kerr nonlinearities and (ii) the coupling of phonons to additional magnon modes. Provided that such additional modes couple weakly to the driven cavity, our model yields a correction proportional to the average Kittel magnon mode occupation. We focus our results on magnetic spheres, where we show that the magnetostatic Walker modes couple to the relevant mechanical modes as efficiently as the Kittel mode. Our model yields excellent agreement with the experimental data.

cond-mat.mes-hall↗

arXiv2023

Dynamical Backaction Evading Magnomechanics

The interaction between magnons and mechanical vibrations dynamically modify the properties of the mechanical oscillator, such as its frequency and decay rate. Known as dynamical backaction, this effect is the basis for many theoretical protocols, such as entanglement generation or mechanical ground-state cooling. However, dynamical backaction is also detrimental for specific applications. Here, we demonstrate the implementation of a cavity magnomechanical measurement that fully evades dynamical backaction effects. Through careful engineering, the magnomechanical scattering rate into the hybrid magnon-photon modes can be precisely matched, eliminating dynamical backaction damping. Backaction evasion is confirmed via the measurement of a drive-power-independent mechanical linewidth.

quant-ph↗

arXiv2021

Engineering atomic polarization with microwave-assisted optical pumping

Polarized atomic ensembles play a crucial role in precision measurements. We demonstrate a novel method of creating atomic polarization in an alkali vapor in a continuous-wave regime. The method relies on a combination of optical pumping by a laser beam and microwave transitions due to a cavity-enhanced magnetic field. With this approach, atomic internal angular momentum can be oriented along a static magnetic field at an arbitrary angle with respect to the laser beam. Furthermore, the atomic polarization depends on the microwave parameters, which can be used for microwave-to-optical transduction and microwave-controlled nonlinear magneto-optical rotation.

physics.atom-ph↗

arXiv2021

Dynamical Backaction Magnomechanics

Dynamical backaction resulting from radiation pressure forces in optomechanical systems has proven to be a versatile tool for manipulating mechanical vibrations. Notably, dynamical backaction has resulted in the cooling of a mechanical resonator to its ground-state, driving phonon lasing, the generation of entangled states, and observation of the optical-spring effect. In certain magnetic materials, mechanical vibrations can interact with magnetic excitations (magnons) via the magnetostrictive interaction, resulting in an analogous magnon-induced dynamical backaction. In this article, we directly observe the impact of magnon-induced dynamical backaction on a spherical magnetic sample's mechanical vibrations. Moreover, dynamical backaction effects play a crucial role in many recent theoretical proposals; thus, our work provides the foundation for future experimental work pursuing many of these theoretical proposals.

cond-mat.mes-hall↗

arXiv2020

Strong magnon-photon coupling within a tunable cryogenic microwave cavity

The ability to achieve strong-coupling has made cavity-magnon systems an exciting platform for the development of hybrid quantum systems and the investigation of fundamental problems in physics. Unfortunately, current experimental realizations are constrained to operate at a single frequency, defined by the geometry of the microwave cavity. In this article we realize a highly-tunable, cryogenic, microwave cavity strongly coupled to magnetic spins. The cavity can be tuned in situ by up to 1.5 GHz, approximately 15% of its original 10 GHz resonance frequency. Moreover, this system remains within the strong-coupling regime at all frequencies with a cooperativity of approximately 800.

physics.app-ph↗

arXiv2020

Magnon-Phonon Quantum Correlation Thermometry

A large fraction of quantum science and technology requires low-temperature environments such as those afforded by dilution refrigerators. In these cryogenic environments, accurate thermometry can be difficult to implement, expensive, and often requires calibration to an external reference. Here, we theoretically propose a primary thermometer based on measurement of a hybrid system consisting of phonons coupled via a magnetostrictive interaction to magnons. Thermometry is based on a cross-correlation measurement in which the spectrum of back-action driven motion is used to scale the thermomechanical motion, providing a direct measurement of the phonon temperature independent of experimental parameters. Combined with a simple low-temperature compatible microwave cavity read-out, this primary thermometer is expected to become a popular thermometer for experiments below 1 K.

physics.app-ph↗

arXiv2020

Atomic microwave-to-optical signal transduction via magnetic-field coupling in a resonant microwave cavity

Atomic vapors offer many opportunities for manipulating electromagnetic signals across a broad range of the electromagnetic spectrum. Here, a microwave signal with an audio-frequency modulation encodes information in an optical signal by exploiting an atomic microwave-to-optical double resonance, and magnetic-field coupling that is amplified by a resonant high-Q microwave cavity. Using this approach, audio signals are encoded as amplitude or frequency modulations in a GHz carrier, transmitted through a cable or over free space, demodulated through cavity-enhanced atom-microwave interactions, and finally, optically detected to extract the original information. This atom-cavity signal transduction technique provides a powerful means by which to transfer information between microwave and optical fields, all using a relatively simple experimental setup without active electronics.

quant-ph↗

arXiv2019

Coherent Magneto-Optomechanical Signal Transduction and Long-Distance Phase-Shift Keying

A transducer capable of converting quantum information stored as microwaves into telecom-wavelength signals is a critical piece of future quantum technology as it promises to enable the networking of quantum processors. Cavity optomechanical devices that are simultaneously coupled to microwave fields and optical resonances are being pursued in this regard. Yet even in the classical regime, developing optical modulators based on cavity optomechanics could provide lower power or higher bandwidth alternatives to current technology. Here we demonstrate a magnetically-mediated wavelength conversion technique, based on mixing high frequency tones with an optomechanical torsional resonator. This process can act either as an optical phase or amplitude modulator depending on the experimental configuration, and the carrier modulation is always coherent with the input tone. Such coherence allows classical information transduction and transmission via the technique of phase-shift keying. We demonstrate that we can encode up to eight bins of information, corresponding to three bits, simultaneously and demonstrate the transmission of an 52,500 pixel image over 6 km of optical fiber with just 0.67% error. Furthermore, we show that magneto-optomechanical transduction can be described in a fully quantum manner, implying that this is a viable approach to signal transduction at the single quantum level.

physics.app-ph↗

arXiv2016

Tunable open-access microcavities for on-chip cQED

We report on the development of on-chip microcavities and show their potential as a platform for cavity quantum electrodynamics experiments. Microcavity arrays were formed by the controlled buckling of SiO2/Ta2O5 Bragg mirrors, and exhibit a reflectance-limited finesse of 3500 and mode volumes as small as 35lambda^3. We show that the cavity resonance can be thermally tuned into alignment with the D2 transition of 87Rb, and outline two methods for providing atom access to the cavity. Owing to their small mode volume and high finesse, these cavities exhibit single-atom cooperativities as high as C1 = 65. A unique feature of the buckled-dome architecture is that the strong-coupling parameter g0/kappa is nearly independent of the cavity size. Furthermore, strong coupling should be achievable with only modest improvements in mirror reflectance, suggesting that these monolithic devices could provide a robust and scalable solution to the engineering of light-matter interfaces.

cond-mat.mes-hall↗