Searcharxiv⌕ Search

arXiv subjects

C. Chappert

Publications and source records attributed to C. Chappert.

At least 19 recordsLinked to original sources
arXiv2025

Time-resolved observation of magnon splitting into vortex gyration and Floquet spin waves

Forced excitations at frequencies in the range of the first order azimuthal spin waves of a magnetic disk in the vortex state are known to scatter into the vortex gyration mode, thereby allowing the growth of Floquet spin waves forming a frequency comb. We study the temporal emergence of this dynamical state using time-resolved microwave electrical measurements. The most intense Floquet mode emerges synchronously with the gyration mode after a common incubation delay which diverges at the scattering threshold. This delay is minimal when the drive is resonant with one of the first order azimuthal spin waves. It can be as short as 3 ns for the maximum investigated power. We conclude that the first-to-occur scattering mechanism is the three-wave splitting of a regular azimuthal eigenmode into a coherent pair formed by a gyration magnon and a Floquet spin wave.

cond-mat.mtrl-sci↗
arXiv2024

Symmetry of the coupling between surface acoustic waves and spin waves in synthetic antiferromagnets

Synthetic antiferromagnets host spin waves that are highly tunable. It is of practical interest to analyze the symmetry of their coupling to surface acoustic waves with the design of hybrid devices in view. For this we calculate the layer-resolved susceptibility tensor of a synthetic antiferromagnet, the effective magneto-elastic and magneto-rotation fields associated to a travelling elastic wave, and the power irreversibly transferred by the elastic wave to the magnetic layers. We consider Rayleigh-type surface acoustic waves: (a) that travel in an elastically isotropic, non-piezoelectric substrate, or (b) that propagate along the X direction at the surface of a Z-cut LiNbO$_3$ substrate, or (c) that are guided in a thin Z-cut LiNbO$_3$ film grown on a sapphire substrate. In particular, we show that the complementary angular dependencies of the acoustic and optical spin wave modes in synthetic antiferromagnets makes it possible to excite spin waves for any relative orientation of magnetization and acoustic wavevector. In addition, we discuss the symmetries of the driving fields and of the energy transferred to the magnetic degree of freedom. We evidence new interaction channels coupling the magnetization eigenmodes when elastic anisotropy and piezoelectricity of the substrate are considered.

cond-mat.mtrl-sci↗
arXiv2023

Unidirectionality of spin waves in Synthetic Antiferromagnets

We study the frequency non-reciprocity of the spin waves in symmetric CoFeB/Ru/CoFeB synthetic antiferromagnets stacks set in the scissors state by in-plane applied fields. Using a combination of Brillouin Light Scattering and propagating spin wave spectroscopy experiments, we show that the acoustical spin waves in synthetic antiferromagnets possess a unique feature if their wavevector is parallel to the applied field: the frequency non-reciprocity due to layer-to-layer dipolar interactions can be so large that the acoustical spin waves transfer energy in a unidirectional manner for a wide and bipolar interval of wavevectors. Analytical modeling and full micromagnetic calculations are conducted to account for the dispersion relations of the optical and acoustical spin waves for arbitrary field orientations. Our formalism provides a simple and direct method to understand and design devices harnessing unidirectional propagation of spin waves in synthetic antiferromagnets.

cond-mat.mtrl-sci↗
arXiv2022

Exchange energies in CoFeB/Ru/CoFeB Synthetic Antiferromagnets

The interlayer exchange coupling confers specific properties to Synthetic Antiferromagnets that make them suitable for several applications of spintronics. The efficient use of this magnetic configuration requires an in-depth understanding of the magnetic properties and their correlation with the material structure. Here we establish a reliable procedure to quantify the interlayer exchange coupling and the intralayer exchange stiffness in synthetic antiferromagnets; we apply it to the ultrasmooth and amorphous Co$_{40}$Fe$_{40}$B$_{20}$ (5-40 nm)/Ru/ Co$_{40}$Fe$_{40}$B$_{20}$ material platform. The complex interplay between the two exchange interactions results in a gradient of the magnetization orientation across the thickness of the stack which alters the hysteresis and the spin wave eigenmodes of the stack in a non trivial way. We measured the field-dependence of the frequencies of the first four spin waves confined within the thickness of the stack. We modeled these frequencies and the corresponding thickness profiles of these spin waves using micromagnetic simulations. The comparison with the experimental results allows to deduce the magnetic parameters that best account for the sample behavior. The exchange stiffness is established to be 16 $\pm$ 2 pJ/m, independently of the Co$_{40}$Fe$_{40}$B$_{20}$ thickness. The interlayer exchange coupling starts from -1.7 mJ/m$^2$ for the thinnest layers and it can be maintained above -1.3 mJ/m$^2$ for CoFeB layers as thick as 40 nm. The comparison of our method with earlier characterizations using the sole saturation fields argues for a need to revisit the tabulated values of interlayer exchange coupling in thick synthetic antiferromagnets.

cond-mat.mtrl-sci↗
arXiv2022

Measuring a population of spin waves from the electrical noise of an inductively coupled antenna

We study how a population of spin waves can be characterized from the analysis of the electrical microwave noise delivered by an inductive antenna placed in its vicinity. The measurements are conducted on a synthetic antiferromagnetic thin stripe covered by a micron-sized antenna that feeds a spectrum analyser after amplification. The antenna noise contains two contributions. The population of incoherent spin waves generates a fluctuating field that is sensed by the antenna: this is the "magnon noise". The antenna noise also contains the contribution of the electronic fluctuations: the Johnson-Nyquist noise. The latter depends on all impedances within the measurement circuit, which includes the antenna self-inductance. As a result, the electronic noise contains information about the magnetic susceptibility of the stripe, though it does not inform on the absolute amplitude of the magnetic fluctuations. For micrometer-sized systems at thermal equilibrium, the electronic noise dominates and the pure magnon noise cannot be determined. If in contrast the spinwave bath is not at thermal equilibrium with the measurement circuit, and if the spin wave population can be changed then one could measure a mode-resolved effective magnon temperature provided specific precautions are implemented.

cond-mat.mtrl-sci↗
arXiv2021

Measuring the dispersion relations of spin wave bands using time-of-flight spectroscopy

We develop a generic all-inductive procedure to measure the band structure of spin waves in a magnetic thin stripe. In contrast to existing techniques, our method works even if several spin wave branches coexist in the investigated frequency interval, provided that the branches possess sufficiently different group velocities. We first measure the microwave scattering matrix of a network composed of distant antennas inductively coupled to the spin wave bath of the magnetic film. After a mathematical transformation to the time-domain to get the transmission impulse response, the different spin wave branches are viewed as wavepackets that reach successively the receiving antenna after different travel times. In analogy with time-of flight spectroscopy, the wavepackets are then separated by time-gating. The time-gated responses are used to recalculate the contribution of each spin wave branch to the frequency domain scattering matrix. The dispersion relation of each branch stems from the absolute phase of the time-gated transmission parameter. The spin wave wavevector can be determined unambiguously if the results for several propagation distances are combined, so as to get the dispersion relations.

cond-mat.mtrl-sci↗
arXiv2010

Frequency shift keying in vortex-based spin torque oscillators

Vortex-based spin-torque oscillators can be made from extended spin valves connected to an electrical nanocontact. We study the implementation of frequency shift keying modulation in these oscillators. Upon a square modulation of the current in the 10 MHz range, the vortex frequency follows the current command, with easy identification of the two swapping frequencies in the spectral measurements. The frequency distribution of the output power can be accounted for by convolution transformations of the dc current vortex waveform, and the current modulation. Modeling indicates that the frequency transitions are phase coherent and last less than 25 ns. Complementing the multi-octave tunability and first-class agility, the capability of frequency shift keying modulation is an additional milestone for the implementation of vortex-based oscillators in RF circuit.

cond-mat.mtrl-sci↗
arXiv2010

Direct experimental measurement of phase-amplitude coupling in spin torque oscillators

We study spin-torque induced oscillations of MgO magnetic tunnel junctions in the time domain. By using the Hilbert transform on the time traces, we obtain for the first time a direct experimental measure of the coupling between the power and the phase fluctuations. We deduce the power restoration rate and we obtain low values for the coupling strength, which is consistent with the weak frequency dependence on the applied voltage.

cond-mat.mtrl-sci↗
arXiv2009

Agility of vortex-based nanocontact spin torque oscillators

We study the agility of current-tunable oscillators based on a magnetic vortex orbiting around a point contact in spin-valves. Theory predicts frequency-tuning by currents occurs at constant orbital radius, so an exceptional agility is anticipated. To test this, we have inserted an oscillator in a microwave interferometer to apply abrupt current variations while time resolving its emission. Using frequency shift keying, we show that the oscillator can switch between two stabilized frequencies differing by 25% in less than ten periods. With a wide frequency tunability and a good agility, such oscillators possess desirable figures of merit for modulation-based rf applications.

cond-mat.mes-hall↗
arXiv2009

Auto-oscillation threshold and line narrowing in MgO-based spin-torque oscillators

We present an experimental study of the power spectrum of current-driven magnetization oscillations in MgO tunnel junctions under low bias. We find the existence of narrow spectral lines, down to 8 MHz in width at a frequency of 10.7 GHz, for small applied fields with clear evidence of an auto-oscillation threshold. Micromagnetics simulations indicate that the excited mode corresponds to an edge mode of the synthetic antiferromagnet.

cond-mat.mtrl-sci↗
arXiv2009

Quantized spin wave modes in magnetic tunnel junction nanopillars

We present an experimental and theoretical study of the magnetic field dependence of the mode frequency of thermally excited spin waves in rectangular shaped nanopillars of lateral sizes 60x100, 75x150, and 105x190 nm2, patterned from MgO-based magnetic tunnel junctions. The spin wave frequencies were measured using spectrally resolved electrical noise measurements. In all spectra, several independent quantized spin wave modes have been observed and could be identified as eigenexcitations of the free layer and of the synthetic antiferromagnet of the junction. Using a theoretical approach based on the diagonalization of the dynamical matrix of a system of three coupled, spatially confined magnetic layers, we have modeled the spectra for the smallest pillar and have extracted its material parameters. The magnetization and exchange stiffness constant of the CoFeB free layer are thereby found to be substantially reduced compared to the corresponding thin film values. Moreover, we could infer that the pinning of the magnetization at the lateral boundaries must be weak. Finally, the interlayer dipolar coupling between the free layer and the synthetic antiferromagnet causes mode anticrossings with gap openings up to 2 GHz. At low fields and in the larger pillars, there is clear evidence for strong non-uniformities of the layer magnetizations. In particular, at zero field the lowest mode is not the fundamental mode, but a mode most likely localized near the layer edges.

cond-mat.mes-hall↗
arXiv2009

Current-driven vortex oscillations in metallic nanocontacts: Zero-field oscillations and training effects

We present an experimental and theoretical study of the low-field dynamics of current-driven vortex oscillations in nanocontacts based on spin-valve multilayers. These oscillations appear as low-frequency (250-500 MHz) excitations in the electrical power spectrum which arise from to variations in the giant-magnetoresistance. We show that the vortex oscillations, once nucleated at large fields applied perpendicular to the film plane, persist at zero applied magnetic fields. Some training effects on the oscillation frequency and linewidth also observed for small in-plane magnetic fields.

cond-mat.mtrl-sci↗
arXiv2008

Auto-oscillation threshold, narrow spectral lines, and line jitter in spin-torque oscillators based on MgO magnetic tunnel junctions

We demonstrate spin torque induced auto-oscillation in MgO-based magnetic tunnel junctions. At the generation threshold, we observe a strong line narrowing down to 6 MHz at 300K and a dramatic increase in oscillator power, yielding spectrally pure oscillations free of flicker noise. Setting the synthetic antiferromagnet into autooscillation requires the same current polarity as the one needed to switch the free layer magnetization. The induced auto-oscillations are observed even at zero applied field, which is believed to be the acoustic mode of the synthetic antiferromagnet. While the phase coherence of the auto-oscillation is of the order of microseconds, the power autocorrelation time is of the order of milliseconds and can be strongly influenced by the free layer dynamics.

cond-mat.mtrl-sci↗
arXiv2007

Lineshape distortion in a nonlinear auto-oscillator near generation threshold: Application to spin-torque nano-oscillators

The lineshape in an auto-oscillator with a large nonlinear frequency shift in the presence of thermal noise is calculated. Near the generation threshold, this lineshape becomes strongly non-Lorentzian, broadened, and asymmetric. A Lorentzian lineshape is recovered far below and far above threshold, which suggests that lineshape distortions provide a signature of the generation threshold. The theory developed adequately describes the observed behavior of a strongly nonlinear spin-torque nano-oscillator.

cond-mat.mtrl-sci↗
arXiv2007

Current-driven vortex oscillations in metallic nanocontacts

We present experimental evidence of sub-GHz spin-transfer oscillations in metallic nano-contacts that are due to the translational motion of a magnetic vortex. The vortex is shown to execute large-amplitude orbital motion outside the contact region. Good agreement with analytical theory and micromagnetics simulations is found.

cond-mat.mtrl-sci↗
arXiv2007

Sub-ns spin-transfer switching: compared benefits of free layer biasing and pinned layer biasing

We analyze the statistical distribution of switching durations in spin-transfer switching induced by current steps, and discuss biasing strategies to enhance the reproducibility of switching durations. We use a macrospin approximation and model the effect of finite temperature as a Boltzmann distribution of initial magnetization states (adiabatic limit). We compare three model spin-valves: a spin-valve with a free layer whose easy axis is parallel to the pinned layer magnetization (standard geometry), a pinned layer with magnetization tilted with respect to the free layer easy axis (pinned layer biasing), and a free layer whose magnetization is pulled away from easy axis by a hard axis bias (free layer biasing). In the conventional geometry, the switching durations follow a broad regular distribution, with an extended long tail comprising very long switching events. For the two biasing strategies, the switching durations follow a multiply-stepped distribution, reflecting the precessional nature of the switching, and the statistical number of precession cycles needed for reversal. We derive analytical criteria to avoid switching events lasting much longer than the average switching duration, in order to achieve the highest reproducibilities. Depending on the current amplitude and the biasing strength, the width of the switching time distribution can be substantially reduced, the best reproducibility being achieved for free layer biasing at overdrive current of a few times unity.

cond-mat.str-el↗
arXiv2006

Distribution of the magnetization reversal duration in sub-ns spin-transfer switching

We study the distribution of switching times in spin-transfer switching induced by sub-ns current pulses in pillar-shaped spin-valves. The pulse durations leading to switching follow a comb-like distribution, multiply-peaked at a few most probable, regularly spaced switching durations. These durations reflect the precessional nature of the switching, which occurs through a fluctuating integer number of precession cycles. This can be modeled considering the thermal variance of the initial magnetization orientations and the occurrence of vanishing total torque in the possible magnetization trajectories. Biasing the spin-valve with a hard axis field prevents some of these occurrences, and can provide an almost perfect reproducibility of the switching duration.

cond-mat.str-el↗