SearcharxivSearch

arXiv subjects

C. Donnelly

Publications and source records attributed to C. Donnelly.

8 recordsLinked to original sources

Nanoscale imaging of spin textures with locally varying altermagnetic response in $α$-Fe$_2$O$_3$

Altermagnetism is a recently identified magnetic state in which time-reversal symmetry is broken despite a collinear compensated spin structure. The response of altermagnets is determined not only by their $d$-, $g$-, or $i$-wave spin order, but also the orientation of their Néel vector $\mathbf{L}$. Therefore, accessing a response that fundamentally depends on the orientation of $\mathbf{L}$, such as the anomalous Hall effect, remains experimentally challenging in particular at the nanoscale. Here, we harness nano-spectroscopic X-ray magnetic circular dichroism (XMCD) to investigate nanoscale modulated altermagnetic responses in $α$-Fe$_2$O$_3$ (Hematite). By performing spectroscopy across the temperature-induced $\mathbf{L}$-reorientation Morin transition, we observe the on-and-off switching of XMCD, in agreement with our theoretical calculations. Although the bulk XMCD vanishes below the Morin temperature, we confirm the reorientation of $\mathbf{L}$ by harnessing polarization-independent X-ray absorption spectroscopy. Moreover, we observe a finite XMCD signal in nanoscale domain walls with locally modulated Néel vectors, while the surrounding domains exhibit no XMCD. At room temperature, we instead identify altermagnetic meron spin textures that exhibit XMCD in their planar regions but no XMCD in their nanoscopic cores. Our results establish a pathway to harness complex spin textures with nanoscale functionalities in a broader class of altermagnets with various $\mathbf{L}$-orientations and using light, earth-abundant elements.

cond-mat.mtrl-sci

Determination of optimal experimental conditions for accurate 3D reconstruction of the magnetization vector via XMCD-PEEM

In this work we present a detailed analysis on the performance of X-ray magnetic circular dichroism photo-emission electron microscopy (XMCD-PEEM) as a tool for vector reconstruction of the magnetization. For this, we choose 360$^{\circ}$ domain wall ring structures which form in a synthetic antiferromagnet as our model to conduct the quantitative analysis. We assess how the quality of the results is affected depending on the number of projections that are involved in the reconstruction process, as well as their angular distribution. For this we develop a self-consistent error metric, which indicates that the main factor of improvement comes from selecting the projections evenly spread out in space, over having a larger number of these spanning a smaller angular range. This work thus poses XMCD-PEEM as a powerful tool for vector imaging of complex 3D magnetic structures.

cond-mat.mes-hall

2024 Roadmap on Magnetic Microscopy Techniques and Their Applications in Materials Science

Considering the growing interest in magnetic materials for unconventional computing, data storage, and sensor applications, there is active research not only on material synthesis but also characterisation of their properties. In addition to structural and integral magnetic characterisations, imaging of magnetization patterns, current distributions and magnetic fields at nano- and microscale is of major importance to understand the material responses and qualify them for specific applications. In this roadmap, we aim to cover a broad portfolio of techniques to perform nano- and microscale magnetic imaging using SQUIDs, spin center and Hall effect magnetometries, scanning probe microscopies, x-ray- and electron-based methods as well as magnetooptics and nanoMRI. The roadmap is aimed as a single access point of information for experts in the field as well as the young generation of students outlining prospects of the development of magnetic imaging technologies for the upcoming decade with a focus on physics, materials science, and chemistry of planar, 3D and geometrically curved objects of different material classes including 2D materials, complex oxides, semi-metals, multiferroics, skyrmions, antiferromagnets, frustrated magnets, magnetic molecules/nanoparticles, ionic conductors, superconductors, spintronic and spinorbitronic materials.

cond-mat.mtrl-sci

Observation and formation mechanism of 360° domain wall rings in Synthetic Anti-Ferromagnets with interlayer chiral interactions

The Interlayer Dzyaloshinskii-Moriya interaction (IL-DMI) chirally couples spins in different ferromagnetic layers of multilayer heterostructures. So far, samples with IL-DMI have been investigated utilizing magnetometry and magnetotransport techniques, where the interaction manifests as a tunable chiral exchange bias field. Here, we investigate the nanoscale configuration of the magnetization vector in a synthetic anti-ferromagnet (SAF) with IL-DMI, after applying demagnetizing field sequences. We add different global magnetic field offsets to the demagnetizing sequence in order to investigate the states that form when the IL-DMI exchange bias field is fully or partially compensated. For magnetic imaging and vector reconstruction of the remanent magnetic states we utilize X-ray magnetic circular dichroism photoemission electron microscopy, evidencing the formation of 360$^{\circ}$ domain wall rings of typically 0.5-3.0 $μm$ in diameter. These spin textures are only observed when the exchange bias field due to the IL-DMI is not perfectly compensated by the magnetic field offset. From a combination of micromagnetic simulations, magnetic charge distribution and topology arguments, we conclude that a non-zero remanent effective field with components both parallel and perpendicular to the anisotropy axis of the SAF is necessary to observe the rings. This work shows how the exchange bias field due to IL-DMI can lead to complex metastable spin states during reversal, important for the development of novel spintronic devices.

cond-mat.mes-hall

Fourier-space generalized magneto-optical ellipsometry

The magneto-optical Kerr effect (MOKE) is a widely used lab-based technique for the study of thin films and nanostructures, providing magnetic characterization with good spatial and temporal resolutions. Due to the complex coupling of light with a magnetic sample, conventional MOKE magnetometers normally work by selecting a small range of incident wave-vector values, focusing the incident light beam to a small spot, and recording the reflected intensity at that angular range by means of photodetectors. This generally provides signals proportional to a mixture of magnetization components, requiring additional methodologies for full vectorial magnetic characterization. Here, we computationally investigate a Fourier-space MOKE setup, where a focused beam ellipsometer using high numerical aperture optics and a camera detector is employed to simultaneously map the intensity distribution for a wide range of incident and reflected wave-vectors. We employ circularly incident polarized light and no analyzing optics, in combination with a fitting procedure of the light intensity maps to the analytical expression of the Kerr effect under linear approximation. In this way, we are able to retrieve the three unknown components of the magnetization vector as well as the material's optical and magneto-optical constants with high accuracy and short acquisition times, with the possibility of single shot measurements. Fourier MOKE is thus proposed as a powerful method to perform generalized magneto-optical ellipsometry for a wide range of magnetic materials and devices.

physics.app-ph

Domain wall automotion in three-dimensional magnetic helical interconnectors

The fundamental limits currently faced by traditional computing devices necessitate the exploration of new ways to store, compute and transmit information. Here, we propose a three-dimensional (3D) magnetic interconnector that exploits geometry-driven automotion of domain walls (DWs), for the transfer of magnetic information between functional magnetic planes. By combining state-of-the-art 3D nanoprinting and standard physical vapor deposition, we prototype 3D helical DW conduits. We observe the automotion of DWs by imaging their magnetic state under different field sequences using X-ray microscopy, observing a robust unidirectional motion of DWs from the bottom to the top of the spirals. From experiments and micromagnetic simulations, we determine that the large thickness gradients present in the structure are the main mechanism for 3D DW automotion. We obtain direct evidence of how this tailorable magnetic energy gradient is imprinted in the devices, and how it competes with pinning effects due to local changes in the energy landscape. Our work also predicts how this effect could lead to high DW velocities, reaching the Walker limit during automotion. This work provides new possibilities for efficient transfer of magnetic information in three dimensions.

cond-mat.mes-hall

Micromagnetic modelling of magnetic domain walls in curved cylindrical nanotubes and nanowires

We investigate the effect of curvature on the energy and stability of domain wall configurations in curved cylindrical nanotubes and nanowires. We use micromagnetic simulations to calculate the phase diagram for the transverse wall (TW) and vortex wall (VW) states in tubes, finding the ground state configuration and the metastability region where both types of walls can exist. The introduction of curvature shifts the range for which the TW is the ground state domain wall to higher diameters, and increases the range of metastability. We interpret this behavior to be primarily due to the curvature-induced effective Dzyaloshinskii-Moriya term in the exchange energy. Furthermore, we demonstrate qualitatively the same behavior in solid cylindrical nanowires. Comparing both tubes and wires, we observe how while in tubes curvature tends to suppress the transformation from the TW to VW, in wires it promotes the transformation of the VW containing the Bloch point into the TW. These findings have important implications in the fundamental understanding of domain walls in 3D geometries, and the design of future domain wall devices.

cond-mat.mes-hall

Layer-by-layer growth of complex-shaped three-dimensional nanostructures with focused electron beams

The fabrication of three-dimensional (3D) nanostructures is of great interest to many areas of nanotechnology currently challenged by fundamental limitations of conventional lithography. One of the most promising direct-write methods for 3D nanofabrication is focused electron beam-induced deposition (FEBID), owing to its high spatial resolution and versatility. Here we extend FEBID to the growth of complex-shaped 3D nanostructures by combining the layer-by-layer approach of conventional macroscopic 3D printers and the proximity effect correction of electron beam lithography. This framework is based on the continuum FEBID model and is capable of adjusting for a wide range of effects present during deposition, including beam-induced heating, defocussing and gas flux anisotropies. We demonstrate the capabilities of our platform by fabricating free-standing nanowires, surfaces with varying curvatures and topologies, and general 3D objects, directly from standard stereolithography (STL) files and using different precursors. Real 3D nanoprinting as demonstrated here opens up exciting avenues for the study and exploitation of 3D nanoscale phenomena.

cond-mat.mes-hall