arXiv subjects

C. Fanelli

Publications and source records attributed to C. Fanelli.

At least 37 records · Page 2Linked to original sources

arXiv2024

Measurement of Spin-Density Matrix Elements in $Δ^{++}(1232)$ photoproduction

We measure the spin-density matrix elements (SDMEs) of the $Δ^{++}(1232)$ in the photoproduction reaction $γp \to π^-Δ^{++}(1232)$ with the GlueX experiment in Hall D at Jefferson Lab. The measurement uses a linearly--polarized photon beam with energies from $8.2$ to $8.8$~GeV and the statistical precision of the SDMEs exceeds the previous measurement by three orders of magnitude for the momentum transfer squared region below $1.4$ GeV$^2$. The data are sensitive to the previously undetermined relative sign between couplings in existing Regge-exchange models. Linear combinations of the extracted SDMEs allow for a decomposition into natural and unnatural--exchange amplitudes. We find that the unnatural exchange plays an important role in the low momentum transfer region.

nucl-ex↗

arXiv2024

Design of the ECCE Detector for the Electron Ion Collider

The EIC Comprehensive Chromodynamics Experiment (ECCE) detector has been designed to address the full scope of the proposed Electron Ion Collider (EIC) physics program as presented by the National Academy of Science and provide a deeper understanding of the quark-gluon structure of matter. To accomplish this, the ECCE detector offers nearly acceptance and energy coverage along with excellent tracking and particle identification. The ECCE detector was designed to be built within the budget envelope set out by the EIC project while simultaneously managing cost and schedule risks. This detector concept has been selected to be the basis for the EIC project detector.

physics.ins-det↗

arXiv2024

Measurement of the J/$ψ$ photoproduction cross section over the full near-threshold kinematic region

We report the total and differential cross sections for $J/ψ$ photoproduction with the large acceptance GlueX spectrometer for photon beam energies from the threshold at 8.2~GeV up to 11.44~GeV and over the full kinematic range of momentum transfer squared, $t$. Such coverage facilitates the extrapolation of the differential cross sections to the forward ($t = 0$) point beyond the physical region. The forward cross section is used by many theoretical models and plays an important role in understanding $J/ψ$ photoproduction and its relation to the $J/ψ-$proton interaction. These measurements of $J/ψ$ photoproduction near threshold are also crucial inputs to theoretical models that are used to study important aspects of the gluon structure of the proton, such as the gluon Generalized Parton Distribution (GPD) of the proton, the mass radius of the proton, and the trace anomaly contribution to the proton mass. We observe possible structures in the total cross section energy dependence and find evidence for contributions beyond gluon exchange in the differential cross section close to threshold, both of which are consistent with contributions from open-charm intermediate states.

nucl-ex↗

arXiv2024

Measurement of Spin-Density Matrix Elements in $ρ(770)$ Production with a Linearly Polarized Photon Beam at $E_γ= 8.2\,-\,8.8\,\text{GeV}$

The GlueX experiment at Jefferson Lab studies photoproduction of mesons using linearly polarized $8.5\,\text{GeV}$ photons impinging on a hydrogen target which is contained within a detector with near-complete coverage for charged and neutral particles. We present measurements of spin-density matrix elements for the photoproduction of the vector meson $ρ$(770). The statistical precision achieved exceeds that of previous experiments for polarized photoproduction in this energy range by orders of magnitude. We confirm a high degree of $s$-channel helicity conservation at small squared four-momentum transfer $t$ and are able to extract the $t$-dependence of natural and unnatural-parity exchange contributions to the production process in detail. We confirm the dominance of natural-parity exchange over the full $t$ range. We also find that helicity amplitudes in which the helicity of the incident photon and the photoproduced $ρ(770)$ differ by two units are negligible for $-t<0.5\,\text{GeV}^{2}/c^{2}$.

nucl-ex↗

arXiv2024

Detailed chemical abundances of the globular cluster Terzan 6 in the inner bulge

We used near-infrared spectroscopy at medium-high resolution (R=8,000$-$25,000) to perform the first comprehensive chemical study of the intermediate luminosity bulge globular cluster Terzan~6. We derived detailed abundances and abundance patterns of 27 giant stars, likely members of Terzan~6, based on their accurate Hubble Space Telescope proper motions and line-of-sight radial velocities. From the spectral analysis of these stars, we determined an average heliocentric radial velocity of 143.3$\pm$1.0 km s$^{-1}$ with a velocity dispersion of 5.1$\pm$0.7 km s$^{-1}$ and an average [Fe/H]=$-0.65\pm0.01$ and a low 1$σ$ dispersion of 0.03 dex. We also measured some depletion of [Mn/Fe] with respect to the solar-scaled values and enhancement of for [Ca/Fe], [Si/Fe], [Mg/Fe], [Ti/Fe], [O/Fe], [Al/Fe], [Na/Fe], and, to a lower extent, for [K/Fe], consistent with previous measurements of other bulge globular clusters and favoring the scenario of a rapid bulge formation and chemical enrichment. Some spread in the light element abundances suggest the presence of first- and second-generation stars, typical of genuine globulars. Finally, we measured some depletion of carbon and low $\rm ^{12}C/^{13}C$ isotopic ratios, as in previous studies of field and cluster bulge giants, indicating that extra-mixing mechanisms should be at work during the post main sequence evolution in the high metallicity regime as well.

astro-ph.GA↗

arXiv2024

AI-Assisted Detector Design for the EIC (AID(2)E)

Artificial Intelligence is poised to transform the design of complex, large-scale detectors like the ePIC at the future Electron Ion Collider. Featuring a central detector with additional detecting systems in the far forward and far backward regions, the ePIC experiment incorporates numerous design parameters and objectives, including performance, physics reach, and cost, constrained by mechanical and geometric limits. This project aims to develop a scalable, distributed AI-assisted detector design for the EIC (AID(2)E), employing state-of-the-art multiobjective optimization to tackle complex designs. Supported by the ePIC software stack and using Geant4 simulations, our approach benefits from transparent parameterization and advanced AI features. The workflow leverages the PanDA and iDDS systems, used in major experiments such as ATLAS at CERN LHC, the Rubin Observatory, and sPHENIX at RHIC, to manage the compute intensive demands of ePIC detector simulations. Tailored enhancements to the PanDA system focus on usability, scalability, automation, and monitoring. Ultimately, this project aims to establish a robust design capability, apply a distributed AI-assisted workflow to the ePIC detector, and extend its applications to the design of the second detector (Detector-2) in the EIC, as well as to calibration and alignment tasks. Additionally, we are developing advanced data science tools to efficiently navigate the complex, multidimensional trade-offs identified through this optimization process.

physics.ins-det↗

arXiv2024

X-shooter spectroscopy of Liller1 giant stars

We present the first comprehensive chemical study of a representative sample of 27 luminous red giant branch (RGB) stars belonging to Liller 1, a complex stellar system in the Galactic bulge. This study is based on medium-resolution near-infrared spectra acquired with X-shooter at the Very Large Telescope. We found a subpopulation counting 22 stars with subsolar metallicity ($<$[Fe/H]$>=-0.31\pm0.02$ and 1$σ$ dispersion of 0.08 dex) and with enhanced [$α$/Fe], [Al/Fe], and [K/Fe] that likely formed early and quickly from gas that was mainly enriched by type II supernovae, and a metal-rich population counting 5 stars with supersolar metallicity ($<$[Fe/H]$>$=+0.22$\pm$0.03 and 1$σ$ dispersion of 0.06 dex) and roughly solar-scaled [$α$/Fe], [Al/Fe], and [K/Fe] that formed at later epochs from gas that was also enriched by type Ia supernovae. Moreover, both subpopulations show enhanced [Na/Fe], as in the bulge field, about solar-scaled [V/Fe], and depletion of [C/Fe] and $^{12}$C/$^{13}$C with respect to the solar values. This indicates that mixing and extra-mixing processes during the RGB evolution also occur at very high metallicities. Notably, no evidence of a Na-O anticorrelation, which is considered the fingerprint of genuine globular clusters, has been found. This challenges any formation scenarios that invoke the accretion of a molecular cloud or an additional stellar system onto a genuine globular cluster. The results of this study underline the strong chemical similarity between Liller 1 and Terzan 5 and support the hypothesis that these complex stellar systems might be fossil fragments of the epoch of Galactic bulge formation.

astro-ph.GA↗

arXiv2023

Search for axion-like particles through nuclear Primakoff production using the GlueX detector

We report on the results of the first search for the production of axion-like particles (ALP) via Primakoff production on nuclear targets using the GlueX detector. This search uses an integrated luminosity of 100 pb$^{-1}\cdot$nucleon on a $^{12}$C target, and explores the mass region of 200 < $m_a$ < 450 MeV via the decay $X\rightarrowγγ$. This mass range is between the $π^0$ and $η$ masses, which enables the use of the measured $η$ production rate to obtain absolute bounds on the ALP production with reduced sensitivity to experimental luminosity and detection efficiency. We find no evidence for an ALP, consistent with previous searches in the quoted mass range, and present limits on the coupling on the scale of $O$(1 TeV). We further find that the ALP production limit we obtain is hindered by the peaking structure of the non-target-related dominant background in GlueX, which we treat by using data on $^4$He to estimate and subtract these backgrounds. We comment on how this search can be improved in a future higher-statistics dedicated measurement.

hep-ex↗

arXiv2023

Artificial Intelligence for the Electron Ion Collider (AI4EIC)

The Electron-Ion Collider (EIC), a state-of-the-art facility for studying the strong force, is expected to begin commissioning its first experiments in 2028. This is an opportune time for artificial intelligence (AI) to be included from the start at this facility and in all phases that lead up to the experiments. The second annual workshop organized by the AI4EIC working group, which recently took place, centered on exploring all current and prospective application areas of AI for the EIC. This workshop is not only beneficial for the EIC, but also provides valuable insights for the newly established ePIC collaboration at EIC. This paper summarizes the different activities and R&D projects covered across the sessions of the workshop and provides an overview of the goals, approaches and strategies regarding AI/ML in the EIC community, as well as cutting-edge techniques currently studied in other experiments.

physics.acc-ph↗

arXiv2023

Ongoing hierarchical massive cluster assembly: the LISCA II structure in the Perseus complex

We report on the identification of a massive ($\sim10^5$ M$_\odot$) sub-structured stellar system in the Galactic Perseus complex likely undergoing hierarchical cluster assembly. Such a system comprises nine star clusters (including the well-known clusters NGC 654 and NGC 663) and an extended and low-density stellar halo. Gaia-DR3 and available spectroscopic data show that all its components are physically consistent in the 6D phase-space (position, parallax, and 3D motion), homogeneous in age (14 $-$ 44 Myr), and chemical content (half-solar metallicity). In addition, the system's global stellar density distribution is that of typical star clusters and shows clear evidence of mass segregation. We find that the hierarchical structure is mostly contracting towards the center with a speed of up to $\simeq4-5$ km s$^{-1}$, while the innermost regions expand at a lower rate (about $\simeq1$ km s$^{-1}$) and are dominated by random motions. Interestingly, this pattern is dominated by the kinematics of massive stars, while low-mass stars ($M<2$ M$_\odot$) are characterized by contraction across the entire cluster. Finally, the nine star clusters in the system are all characterized by a relatively flat velocity dispersion profile possibly resulting from ongoing interactions and tidal heating. We show that the observational results are generally consistent with those found in $N$-body simulations following the cluster violent relaxation phase strongly suggesting that the system is a massive cluster in the early assembly stages. This is the second structure with these properties identified in our Galaxy and, following the nomenclature of our previous work, we named it LISCA II.

astro-ph.GA↗

arXiv2023

Detector Requirements and Simulation Results for the EIC Exclusive, Diffractive and Tagging Physics Program using the ECCE Detector Concept

This article presents a collection of simulation studies using the ECCE detector concept in the context of the EIC's exclusive, diffractive, and tagging physics program, which aims to further explore the rich quark-gluon structure of nucleons and nuclei. To successfully execute the program, ECCE proposed to utilize the detecter system close to the beamline to ensure exclusivity and tag ion beam/fragments for a particular reaction of interest. Preliminary studies confirmed the proposed technology and design satisfy the requirements. The projected physics impact results are based on the projected detector performance from the simulation at 10 or 100 fb^-1 of integrated luminosity. Additionally, a few insights on the potential 2nd Interaction Region can (IR) were also documented which could serve as a guidepost for the future development of a second EIC detector.

physics.ins-det↗

arXiv2022

Magnetic nanodrug delivery in non-Newtonian blood flows

With the goal of determining strategies to maximise drug delivery to a specific site in the body, we developed a mathematical model for the transport of drug nanocarriers (nanoparticles) in the bloodstream under the influence of an external magnetic field. Under the assumption of long (compared to the radius) blood vessels the Navier-Stokes equations are reduced, to a simpler model consistently with lubrication theory. Under these assumptions, analytical results are compared for Newtonian, power-law, Carreau and Ellis fluids, and these clearly demonstrate the importance of shear thinning effects when modelling blood flow. Incorporating nanoparticles and a magnetic field to the model we develop a numerical scheme and study the particle motion for different field strengths. We demonstrate the importance of the non-Newtonian behaviour: for the flow regimes investigated in this work, consistent with those in blood micro vessels, we find that the field strength needed to absorb a certain amount of particles in a non-Newtonian fluid has to be larger than the one needed in a Newtonian fluid. Specifically, for one case examined, a two times larger magnetic force had to be applied in the Ellis fluid than in the Newtonian fluid for the same number of particles to be absorbed through the vessel wall. Consequently, models based on a Newtonian fluid can drastically overestimate the effect of a magnetic field. Finally, we evaluate the particle concentration at the vessel wall and compute the evolution of the particle flux through the wall for different permeability values, as that is important when assessing the efficacy of drug delivery applications. The insights from our work bring us a step closer to successfully transferring magnetic nanoparticle drug delivery to the clinic.

physics.flu-dyn↗

arXiv2022

Open Heavy Flavor Studies for the ECCE Detector at the Electron Ion Collider

The ECCE detector has been recommended as the selected reference detector for the future Electron-Ion Collider (EIC). A series of simulation studies have been carried out to validate the physics feasibility of the ECCE detector. In this paper, detailed studies of heavy flavor hadron and jet reconstruction and physics projections with the ECCE detector performance and different magnet options will be presented. The ECCE detector has enabled precise EIC heavy flavor hadron and jet measurements with a broad kinematic coverage. These proposed heavy flavor measurements will help systematically study the hadronization process in vacuum and nuclear medium especially in the underexplored kinematic region.

physics.ins-det↗

arXiv2022

ECCE Sensitivity Studies for Single Hadron Transverse Single Spin Asymmetry Measurements

We performed feasibility studies for various single transverse spin measurements that are related to the Sivers effect, transversity and the tensor charge, and the Collins fragmentation function. The processes studied include semi-inclusive deep inelastic scattering (SIDIS) where single hadrons (pions and kaons) were detected in addition to the scattered DIS lepton. The data were obtained in {\sc pythia}6 and {\sc geant}4 simulated e+p collisions at 18 GeV on 275 GeV, 18 on 100, 10 on 100, and 5 on 41 that use the ECCE detector configuration. Typical DIS kinematics were selected, most notably $Q^2 > 1 $ GeV$^2$, and cover the $x$ range from $10^{-4}$ to $1$. The single spin asymmetries were extracted as a function of $x$ and $Q^2$, as well as the semi-inclusive variables $z$, and $P_T$. They are obtained in azimuthal moments in combinations of the azimuthal angles of the hadron transverse momentum and transverse spin of the nucleon relative to the lepton scattering plane. The initially unpolarized MonteCarlo was re-weighted in the true kinematic variables, hadron types and parton flavors based on global fits of fixed target SIDIS experiments and $e^+e^-$ annihilation data. The expected statistical precision of such measurements is extrapolated to 10 fb$^{-1}$ and potential systematic uncertainties are approximated given the deviations between true and reconstructed yields. The impact on the knowledge of the Sivers functions, transversity and tensor charges, and the Collins function has then been evaluated in the same phenomenological extractions as in the Yellow Report. The impact is found to be comparable to that obtained with the parameterized Yellow Report detector and shows that the ECCE detector configuration can fulfill the physics goals on these quantities.

hep-ex↗

arXiv2022

ECCE unpolarized TMD measurements

We performed feasibility studies for various measurements that are related to unpolarized TMD distribution and fragmentation functions. The processes studied include semi-inclusive Deep inelastic scattering (SIDIS) where single hadrons (pions and kaons) were detected in addition to the scattered DIS lepton. The single hadron cross sections and multiplicities were extracted as a function of the DIS variables $x$ and $Q^2$, as well as the semi-inclusive variables $z$, which corresponds to the momentum fraction the detected hadron carries relative to the struck parton and $P_T$, which corresponds to the transverse momentum of the detected hadron relative to the virtual photon. The expected statistical precision of such measurements is extrapolated to accumulated luminosities of 10 fb$^{-1}$ and potential systematic uncertainties are approximated given the deviations between true and reconstructed yields.

hep-ex↗

arXiv2022

Exclusive J/$ψ$ Detection and Physics with ECCE

Exclusive heavy quarkonium photoproduction is one of the most popular processes in EIC, which has a large cross section and a simple final state. Due to the gluonic nature of the exchange Pomeron, this process can be related to the gluon distributions in the nucleus. The momentum transfer dependence of this process is sensitive to the interaction sites, which provides a powerful tool to probe the spatial distribution of gluons in the nucleus. Recently the problem of the origin of hadron mass has received lots of attention in determining the anomaly contribution $M_{a}$. The trace anomaly is sensitive to the gluon condensate, and exclusive production of quarkonia such as J/$ψ$ and $Υ$ can serve as a sensitive probe to constrain it. In this paper, we present the performance of the ECCE detector for exclusive J/$ψ$ detection and the capability of this process to investigate the above physics opportunities with ECCE.

nucl-ex↗

arXiv2022

Search for $e\toτ$ Charged Lepton Flavor Violation at the EIC with the ECCE Detector

The recently approved Electron-Ion Collider (EIC) will provide a unique new opportunity for searches of charged lepton flavor violation (CLFV) and other new physics scenarios. In contrast to the $e \leftrightarrow μ$ CLFV transition for which very stringent limits exist, there is still a relatively large discovery space for the $e \to τ$ CLFV transition, potentially to be explored by the EIC. With the latest detector design of ECCE (EIC Comprehensive Chromodynamics Experiment) and projected integral luminosity of the EIC, we find the $τ$-leptons created in the DIS process $ep\to τX$ are expected to be identified with high efficiency. A first ECCE simulation study, restricted to the 3-prong $τ$-decay mode and with limited statistics for the Standard Model backgrounds, estimates that the EIC will be able to improve the current exclusion limit on $e\to τ$ CLFV by an order of magnitude.

hep-ph↗

arXiv2022

Design and Simulated Performance of Calorimetry Systems for the ECCE Detector at the Electron Ion Collider

We describe the design and performance the calorimeter systems used in the ECCE detector design to achieve the overall performance specifications cost-effectively with careful consideration of appropriate technical and schedule risks. The calorimeter systems consist of three electromagnetic calorimeters, covering the combined pseudorapdity range from -3.7 to 3.8 and two hadronic calorimeters. Key calorimeter performances which include energy and position resolutions, reconstruction efficiency, and particle identification will be presented.

physics.ins-det↗