Searcharxiv⌕ Search

arXiv subjects

C. G. R. Geddes

Publications and source records attributed to C. G. R. Geddes.

At least 19 recordsLinked to original sources
arXiv2026

Experimental demonstration of Flying-Focus enhanced Thomson scattering

We report the experimental demonstration of a spatiotemporally engineered "Flying-Focus" laser pulse for enhanced x-ray generation in relativistic Thomson scattering. A combination of longitudinal chromatic aberration, angular dispersion, and group delay dispersion was applied to an ultrashort relativistically intense laser pulse to control the motion of its focal point. Precise tuning of the group delay dispersion was used to match the velocity of the focus to the trajectory of a counterpropagating electron bunch, produced by a laser wakefield accelerator. This prolonged the Thomson scattering interaction while reducing nonlinear effects, leading to an enhanced x-ray yield. The approach has the potential to increase the spectral density and brightness of the x-ray beam by orders of magnitude compared to equivalent focusing without spatiotemporal control. This experiment establishes a new technique for structured-light control at high intensity, demonstrating the realization of dynamic intensity structures that enhance light-matter interactions and for the generation of ultra-bright radiation sources.

physics.optics↗
arXiv2026

Revealing Laser and Electron Beam Evolution in 10-GeV-class Laser-Plasma Accelerators

Guiding relativistically intense laser pulses in low-density plasmas enables extended acceleration lengths in laser-plasma accelerators (LPAs), allowing for the production of multi-GeV electron beams. Quantitative interpretation of such experiments is often limited by substantial uncertainties in key plasma parameters, particularly the transverse density profile of hydrodynamic optically field-ionized channels. Distinct plasma density distributions can produce similar terminal beam energies, complicating efforts to infer the underlying interaction physics from measurements at the accelerator exit alone. By combining longitudinally resolved electron beam diagnostics with independent measurements of laser spectral evolution in a 10 GeV LPA, we establish a multi-observable constraint on plasma density profiles. Once plasma downramps are taken into account, excellent agreement is observed with simulation over the entire accelerator length for two plasma channel sizes. The validated simulations indicate that extending the accelerator length to 65 cm would increase the electron beam energy to 15 GeV. They also point the way to achieving $\sim$20 GeV electron beams in $\sim$70 cm via linear matching using the same 24 J laser energy.

physics.acc-ph↗
arXiv2025

Longitudinal tapering in meter-scale gas jets for increased efficiency of laser plasma accelerators

Modern laser plasma accelerators (LPAs) often require plasma waveguides tens of cm long to propagate a high-intensity drive laser pulse. Tapering the longitudinal gas density profile in 10 cm scale gas jets could allow for single stage laser plasma acceleration well beyond 10 GeV with current petawatt-class laser systems. Via simulation and interferometry measurements, we show density control by longitudinally adjusting the throat width and jet angle. Density profiles appropriate for tapering were calculated analytically and via particle-in-cell (PIC) simulations, and were matched experimentally. These simulations show that tapering can increase electron beam energy using 19 J laser energy from ~9 GeV to >12 GeV in a 30 cm plasma, and the accelerated charge by an order of magnitude. This paper was published in Review of Scientific Instruments on April 11, 2025 DOI: https://doi.org/10.1063/5.0250698

physics.acc-ph↗
arXiv2024

Modeling and Design of Compact, Permanent-Magnet Transport Systems for Highly Divergent, Broad Energy Spread Laser-Driven Proton Beams

Laser-driven (LD) ion acceleration has been explored in a newly constructed short focal length beamline at the BELLA petawatt facility (interaction point 2, iP2). For applications utilizing such LD ion beams, a beam transport system is required, which for reasons of compactness be ideally contained within 3 m. While they are generated from a micron-scale source, large divergence and energy spread of LD ion beams present a unique challenge to transporting them compared to beams from conventional accelerators. This study gives an overview of proposed compact transport designs using permanent magnets satisfying different requirements depending on the application for the iP2 proton beamline such as radiation biology, material science, and high energy density science. These designs are optimized for different parameters such as energy spread and peak proton density according to the application's need. The various designs consist solely of permanent magnet elements, which can provide high magnetic field gradients on a small footprint. While the field strengths are fixed, we have shown that the beam size is able to be tuned effectively by varying the placement of the magnets. The performance of each design was evaluated based on high order particle tracking simulations of typical LD proton beams. We also examine the ability of certain configurations to tune and select beam energies, critical for specific applications. A more detailed investigation was carried out for a design to deliver 10 MeV LD accelerated ions for radiation biology applications. With these transport system designs, the iP2 beamline is ready to house various application experiments.

physics.acc-ph↗
arXiv2024

Report on the Advanced Linear Collider Study Group (ALEGRO) Workshop 2024

The workshop focused on the application of ANAs to particle physics keeping in mind the ultimate goal of a collider at the energy frontier (10\,TeV, e$^+$/e$^-$, e$^-$/e$^-$, or $γγ$). The development of ANAs is conducted at universities and national laboratories worldwide. The community is thematically broad and diverse, in particular since lasers suitable for ANA research (multi-hundred-terawatt peak power, a few tens of femtosecond-long pulses) and acceleration of electrons to hundreds of mega electron volts to multi giga electron volts became commercially available. The community spans several continents (Europe, America, Asia), including more than 62 laboratories in more than 20 countries. It is among the missions of the ICFA-ANA panel to feature the amazing progress made with ANAs, to provide international coordination and to foster international collaborations towards a future HEP collider. The scope of this edition of the workshop was to discuss the recent progress and necessary steps towards realizing a linear collider for particle physics based on novel-accelerator technologies (laser or beam driven in plasma or structures). Updates on the relevant aspects of the European Strategy for Particle Physics (ESPP) Roadmap Process as well as of the P5 (in the US) were presented, and ample time was dedicated to discussions. The major outcome of the workshop is the decision for ALEGRO to coordinate efforts in Europe, in the US, and in Asia towards a pre-CDR for an ANA-based, 10\,TeV CM collider. This goal of this coordination is to lead to a funding proposal to be submitted to both EU and EU/US funding agencies. This document presents a summary of the workshop, as seen by the co-chairs, as well as short 'one-pagers' written by the presenters at the workshop.

physics.acc-ph↗
arXiv2024

Matched Guiding and Controlled Injection in Dark-Current-Free, 10-GeV-Class, Channel-Guided Laser Plasma Accelerators

We measure the high intensity laser propagation throughout meter-scale, channel-guided LPAs by adjusting the length of the plasma channel on a shot-by-shot basis, showing high quality guiding of 500 TW laser pulses over 30 cm in a hydrogen plasma of density $n_0 \approx 1 \times 10^{17} \, \mathrm{cm^{-3}}$. We observed transverse energy transport of higher-order modes in the first $\approx 12 \, \mathrm{cm}$ of the plasma channel, followed by quasi-matched propagation, and the gradual, dark-current-free depletion of laser energy to the wakefield. We quantify the laser-to-wake transfer efficiency limitations of currently available PW-class laser systems, and demonstrate via simulation how control over the laser mode can significantly improve accelerated beam parameters. Using just 21.3 J of laser energy, and triggering localized electron injection into the accelerator, we observed electron bunches with single, quasimonoenergetic peaks, relative energy spreads as low as 3 % and energy up to 9.2 GeV with charge extending beyond 10 GeV.

physics.plasm-ph↗
arXiv2022

Strong-Field QED Experiments using the BELLA PW Laser Dual Beamlines

The Petawatt (PW) laser facility of the Berkeley Lab Laser Accelerator (BELLA) Center has recently commissioned its second laser pulse transport line. This new beamline can be operated in parallel with the first beamline and enables strong-field quantum electrodynamics (SF-QED) experiments at BELLA. In this paper, we present an overview of the upgraded BELLA PW facility with a SF-QED experimental layout in which intense laser pulses collide with GeV-class laser-wakefield-accelerated electron beams. We present simulation results showing that experiments will allow the study of laser-particle interactions from the classical to the SF-QED regime with a nonlinear quantum parameter of up to $χ\sim$2. In addition, we show that experiments will enable the study and production of GeV-class, mrad-divergence positron beams via the Breit-Wheeler process.

physics.acc-ph↗
arXiv2022

Carbon nanotube substrates enhance SARS-CoV-2 spike protein ion yields in matrix assisted laser desorption-ionization mass spectrometry

Nanostructured surfaces enhance ion yields in matrix assisted laser desorption-ionization mass spectrometry (MALDI-MS). The spike protein complex, S1, is one fingerprint signature of Sars-CoV-2 with a mass of 75 kDa. Here, we show that MALDI-MS yields of Sars-CoV-2 spike protein ions in the 100 kDa range are enhanced 50-fold when the matrix-analyte solution is placed on substrates that are coated with a dense forest of multi-walled carbon nanotubes, compared to yields from uncoated substrates. Nanostructured substrates can support the development of mass spectrometry techniques for sensitive pathogen detection and environmental monitoring.

physics.bio-ph↗
arXiv2022

Higgs Factory Considerations

We discuss considerations that can be used to formulate recommendations for initiating a lepton collider project that would provide precision studies of the Higgs boson and related electroweak phenomena.

hep-ex↗
arXiv2022

Beam dynamics challenges in linear colliders based on laser-plasma accelerators

In this paper we discuss design considerations and beam dynamics challenges associated with laser-driven plasma-based accelerators as applied to multi-TeV-scale linear colliders. Plasma accelerators provide ultra-high gradients and ultra-short bunches, offering the potential for compact linacs and reduced power requirements. We show that stable, efficient acceleration with beam quality preservation is possible in the nonlinear bubble regime of laser-plasma accelerators using beam shaping. Ion motion, naturally occuring for dense beams (i.e., low emittance and high energy) severely damps transverse beam instabilities. Coulomb scattering by the background ions is considered and it is shown that the strong focusing in the plasma strongly suppresses scattering-induced emittance growth. Betatron radiation emission from the transverse motion of the beam in the plasma will result in beam power loss and energy spread growth; however for sub-100 nm emittances, the beam power loss and energy spread growth will be sub-percent for multi-TeV-class plasma linacs.

physics.acc-ph↗
arXiv2020

International Workshop on Next Generation Gamma-Ray Source

A workshop on The Next Generation Gamma-Ray Sources sponsored by the Office of Nuclear Physics at the Department of Energy, was held November 17--19, 2016 in Bethesda, Maryland. The goals of the workshop were to identify basic and applied research opportunities at the frontiers of nuclear physics that would be made possible by the beam capabilities of an advanced laser Compton beam facility. To anchor the scientific vision to realistically achievable beam specifications using proven technologies, the workshop brought together experts in the fields of electron accelerators, lasers, and optics to examine the technical options for achieving the beam specifications required by the most compelling parts of the proposed research programs. An international assembly of participants included current and prospective $γ$-ray beam users, accelerator and light-source physicists, and federal agency program managers. Sessions were organized to foster interactions between the beam users and facility developers, allowing for information sharing and mutual feedback between the two groups. The workshop findings and recommendations are summarized in this whitepaper.

nucl-ex↗
arXiv2019

Multiple-colliding laser pulses as a basis for studying high-field high-energy physics

Apart from maximizing the strength of optical electromagnetic fields achievable at high-intensity laser facilities, the collision of several phase-matched laser pulses has been theoretically identified as a trigger of and way to study various phenomena. These range from the basic processes of strong-field quantum electrodynamics to the extraordinary dynamics of the generated electron-positron plasmas. This has paved the way for several experimental proposals aimed at both fundamental studies of matter at extreme conditions and the creation of particle and radiation sources. Because of the unprecedented capabilities of such sources they have the potential to open up new opportunities for experimental studies in nuclear and quark-gluon physics. We here perform a systematic analysis of different regimes and opportunities achievable with the concept of multiple-colliding laser pulses (MCLP), for both current and upcoming laser facilities. We reveal that several distinct regimes could be within reach of multi-PW laser facilities.

physics.plasm-ph↗
arXiv2015

Ultra-low emittance beam generation using two-color ionization injection in a CO2 laser-driven plasma accelerator

Ultra-low emittance (tens of nm) beams can be generated in a plasma accelerator using ionization injection of electrons into a wakefield. An all-optical method of beam generation uses two laser pulses of different colors. A long-wavelength drive laser pulse (with a large ponderomotive force and small peak electric field) is used to excite a large wakefield without fully ionizing a gas, and a short-wavelength injection laser pulse (with a small ponderomotive force and large peak electric field), co-propagating and delayed with respect to the pump laser, to ionize a fraction of the remaining bound electrons at a trapped wake phase, generating an electron beam that is accelerated in the wake. The trapping condition, the ionized electron distribution, and the trapped bunch dynamics are discussed. Expressions for the beam transverse emittance, parallel and orthogonal to the ionization laser polarization, are presented. An example is shown using a 10-micron CO2 laser to drive the wake and a frequency-doubled Ti:Al2O3 laser for ionization injection.

physics.plasm-ph↗
arXiv2014

Controlling the spectral shape of nonlinear Thomson scattering with proper laser chirping

Effects of nonlinearity in Thomson scattering of a high intensity laser pulse from electrons are analyzed. Analytic expressions for laser pulse shaping in amplitude and frequency are obtained which control spectrum broadening for arbitrarily high laser pulse intensities. These analytic solutions allow prediction of the spectral form and required laser parameters to avoid broadening. The predictions are validated by numerical calculations. This control over the scattered radiation bandwidth allows of narrow bandwidth sources to be produced using high scattering intensities, which in turn greatly improves scattering yield for future x- and gamma-ray sources.

physics.plasm-ph↗
arXiv2014

Quasi-monoenergetic femtosecond photon sources from Thomson Scattering using laser plasma accelerators and plasma channels

Narrow bandwidth, high energy photon sources can be generated by Thomson scattering of laser light from energetic electrons, and detailed control of the interaction is needed to produce high quality sources. We present analytic calculations of the energy-angular spectra and photon yield that parametrize the influences of the electron and laser beam parameters to allow source design. These calculations, combined with numerical simulations, are applied to evaluate sources using conventional scattering in vacuum and methods for improving the source via laser waveguides or plasma channels. We show that the photon flux can be greatly increased by using a plasma channel to guide the laser during the interaction. Conversely, we show that to produce a given number of photons, the required laser energy can be reduced by an order of magnitude through the use of a plasma channel. In addition, we show that a plasma can be used as a compact beam dump, in which the electron beam is decelerated in a short distance, thereby greatly reducing radiation shielding. Realistic experimental errors such as transverse jitter are quantitatively shown to be tolerable. Examples of designs for sources capable of performing nuclear resonance fluorescence and photofission are provided.

physics.plasm-ph↗
arXiv2013

Snowmass 2013 Computing Frontier: Accelerator Science

This is the working summary of the Accelerator Science working group of the Computing Frontier of the Snowmass meeting 2013. It summarizes the computing requirements to support accelerator technology in both Energy and Intensity Frontiers.

physics.acc-ph↗
arXiv2013

Computational accelerator science needs towards laser-plasma accelerators for future colliders

Laser plasma accelerators have the potential to reduce the size of future linacs for high energy physics by more than an order of magnitude, due to their high gradient. Research is in progress at current facilities, including the BELLA PetaWatt laser at LBNL, towards high quality 10 GeV beams and staging of multiple modules, as well as control of injection and beam quality. The path towards high-energy physics applications will likely involve hundreds of such stages, with beam transport, conditioning and focusing. Current research focuses on addressing physics and R&D challenges required for a detailed conceptual design of a future collider. Here, the tools used to model these accelerators and their resource requirements are summarized, both for current work and to support R&D addressing issues related to collider concepts.

physics.acc-ph↗