arXiv subjects

C. Hoarau

Publications and source records attributed to C. Hoarau.

24 records · Page 2Linked to original sources

arXiv2018

Tunable sub-gap radiation detection with superconducting resonators

We have fabricated planar amorphous Indium Oxide superconducting resonators ($T_c\sim2.8$ K) that are sensitive to frequency-selective radiation in the range of 7 to 10 GHz. Those values lay far below twice the superconducting gap that worths about 200 GHz. The photons detection consists in a shift of the fundamental resonance frequency. We show that the detected frequency can be adjusted by modulating the total length of the superconducting resonator. We attribute those observations to the excitation of higher-order resonance modes. The coupling between the fundamental lumped and the higher order distributed resonance is due to the kinetic inductance non-linearity with current. These devices, that we have called Sub-gap Kinetic Inductance Detectors (SKIDs), are to be distinguished from the standard Kinetic Inductance Detectors (KIDs) in which quasi-particles are generated when incident light breaks down Cooper pairs.

cond-mat.supr-con↗

arXiv2018

The NIKA2 instrument at 30-m IRAM telescope: performance and results

The New IRAM KID Arrays 2 (NIKA2) consortium has just finished installing and commissioning a millimetre camera on the IRAM 30 m telescope. It is a dual-band camera operating with three frequency multiplexed kilo-pixels arrays of Lumped Element Kinetic Inductance Detectors (LEKID) cooled at 150 mK, designed to observe the intensity and polarisation of the sky at 260 and 150 GHz (1.15 and 2 mm). NIKA2 is today an IRAM resident instrument for millimetre astronomy, such as Intra Cluster Medium from intermediate to distant clusters and so for the follow-up of Planck satellite detected clusters, high redshift sources and quasars, early stages of star formation and nearby galaxies emission. We present an overview of the instrument performance as it has been evaluated at the end of the commissioning phase.

astro-ph.IM↗

arXiv2016

Microfabrication technology for large LEKID arrays : from NIKA2 to future applications

The Lumped Element Kinetic Inductance Detectors (LEKID)demonstrated full maturity in the NIKA (New IRAM KID Arrays)instrument. These results allow directly comparing LEKID performance with other competing technologies (TES, doped silicon) in the mm and sub-mm range. A continuing effort is ongoing to improve the microfabrication technologies and concepts in order to satisfy the requirements of new instruments. More precisely, future satellites dedicated to CMB (Cosmic Microwave Background) studies will require the same focal plane technology to cover, at least, the frequency range of 60 to 600 GHz. Aluminium LEKID developed for NIKA have so far demonstrated, under real telescope conditions, performance approaching photon-noise limitation in the band 120-300 GHz. By implementing superconducting bi-layers we recently demonstrated LEKID arrays working in the range 80-120 GHz and with sensitivities approaching the goals for CMB missions. NIKA itself (350 pixels) is followed by a more ambitious project requiring several thousands (3000-5000) pixels. NIKA2 has been installed in October 2015 at the IRAM 30-m telescope. We will describe in detail the technological improvements that allowed a relatively harmless 10-fold up-scaling in pixels count without degrading the initial sensitivity. In particular we will briefly describe a solution to simplify the difficult fabrication step linked to the slot-line propagation mode in coplanar waveguide.

astro-ph.IM↗

arXiv2015

Multi-Wave Coherent Control of a Solid State Single Emitter

Coherent control of individual two-level systems (TLSs) is at the basis of any implementation of quantum information. An impressive level of control is now achieved using nuclear, vacancies and charge spins. Manipulation of bright exciton transitions in semiconductor quantum dots (QDs) is less advanced, principally due to the sub-nanosecond dephasing. Conversely, owing to their robust coupling to light, one can apply tools of nonlinear spectroscopy to achieve all-optical command. Here, we report on the coherent manipulation of an exciton via multi-wave mixing. Specifically, we employ three resonant pulses driving a single InAs QD. The first two induce a four-wave mixing (FWM) transient, which is projected onto a six-wave mixing (SWM) depending on the delay and area of the third pulse, in agreement with analytical predictions. Such a switch enables to demonstrate the generation of SWM on a single emitter and to engineer the spectro-temporal shape of the coherent response originating from a TLS. These results pave the way toward multi-pulse manipulations of solid state qubits via implementing the NMR-like control schemes in the optical domain.

cond-mat.mes-hall↗

arXiv2013

Tunability versus deviation sensitivity in a non-linear vortex oscillator

Frequency modulation experiments were performed on a spin torque vortex oscillator for a wide range of modulation frequency, up to 10 % of the oscillator frequency. A thorough analysis of the intermodulation products shows that the key parameter that describes these experiments is the deviation sensitivity, which is the dynamical frequency-current dependence. It differs significantly from the oscillator tunability discussed so far in the context of spin-transfer oscillators. The essential difference between these two concepts is related to the response time of the vortex oscillator, driven either in quasi-steady state or in a transient regime.

cond-mat.mes-hall↗

arXiv2011

Parametric oscillator based on non-linear vortex dynamics in low resistance magnetic tunnel junctions

Radiofrequency vortex spin-transfer oscillators based on magnetic tunnel junctions with very low resistance area product were investigated. A high power of excitations has been obtained characterized by a power spectral density containing a very sharp peak at the fundamental frequency and a series of harmonics. The observed behaviour is ascribed to the combined effect of spin transfer torque and Oersted-Ampère field generated by the large applied dc-current. We furthermore show that the synchronization of a vortex oscillation by applying a ac bias current is mostly efficient when the external frequency is twice the oscillator fundamental frequency. This result is interpreted in terms of a parametric oscillator.

cond-mat.mes-hall↗